Save some settings Cura doesn't use, but other consumers of the file might in the metadata during deserilization, so they can be properly re-serialized whenever exported.
part of CURA-9432
We don't want to create actual settings for all of these. Just store them in the profile metadata and restore them.
Serialising and deserialising these is a bit more work than what I could do now in 5 minutes so we'll have to do that a bit later, but at least for now we have the complete list.
Contributes to issue CURA-9432.
Setting this value smaller could cause scarring when the nozzle offset calibration is not performed. A higher value causes a too big gap between the model and support, resulting in support not being attached to the model on sloped surfaces. PP-185
A bigger horizontal expansion is improving the stability of the support structure. Setting the Support Horizontal Expansion > Support X/Y distance causes the support folding around the object, making it way harder to remove and introducing a lot of additional stringing. PP-185
PVA is stringing a lot due to the too small retract distance. This oozed material is causing under extrusion elsewhere, reducing the strength of the support. Too long retractions could cause reliability issues as well. However, since we reduced the number of retractions by ~40% for the smaller models (for bigger models it is ~0%, but then it is also not relevant since a lot of material is printed in between) with the new settings of PP-108 increasing the retract distance to 6.5mm is safe. PP-185
That way, an extruder profile can say that they want this.
If any extruder needs this setting enabled, it will be enabled for the whole print.
Done as a 5 minute fix.
Although we only really need the intents, it doesn't hurt to also include the variants.
No idea if we will ever need or use it, but we might as well add it now.
CURA-7667
The reason for this is that hovering the mouse between the checkbox and text was causing some strange behaviour where sometimes the tooltip would not appear.
The effect of the changes in RecommendedSupportSelector.qml are the same as RecommendedAdhesionSelector.qml. It just required a bit of refactoring to have the checkbox and the textlabel in the same component.
CURA-8849
Removed alwaysRunToEnd on animation since we would like the previous animation to stop if a user clicks through multiple intents triggering multiple animations.
CURA-8849
Let's put it in the Cura directory with the rest of such files, as to not muddy the 3MF file with all sorts of directories that are not known to other consumers.
Contributes to issue CURA-9413.
I tried updating when the qualities change but this was updating before this line
if(recommendedResolutionSelector._previousResolution !== Cura.MachineManager.activeQualityType)
which caused this always to resolve as true
The solution was to update _previousResolution after we select an item in the drop down.
CURA-8849
