These printers have the same feeder and therefore share the same retract settings. The retract speed is set high by default and the unretract speed low by default. This is a safe and good default. PP-96
- "Minimum_value" changed to "minimum_warning_value"
- PVA (BB0.4 and BB0.8) require low support jerk settings for good adhesion
- Support roof does follow print_jer and no warning levels set
If there's a value, the default_value isn't used. This test exists to prevent confusion between the two, where a contributor could change the default_value but it gets overridden by a value.
Contributes to issue PP-1.
- Explicitly set combing mode to the new 'no_outer_surfaces' strategy
- Adjusted the engineering profiles to use 100% wall flow and triangle infill pattern
So that they can inherit the formula of calculating the retraction combing from the fdmprinter. This way, the combing will be changed according to whether the monotonic top/bottom order and ironing are used.
CURA-7976
Revert "Change file extension to .umm"
This reverts commit 56db7f7144083df4bca77746d7ee30f2a54fda36.
Revert "Re-enable compression"
This reverts commit 62bc9be22bbc5595dbfce69893163c3a0ebc4415.
Revert "Add documentation"
This reverts commit e9031f1aff5d40f3c69ac625edf11963a3253eb8.
Revert "Fix writing bytes to string-stream"
This reverts commit 66b2825a667f9aa9618005d2a5875383a3658f4f.
Revert "Hide button entirely if no export is available"
This reverts commit ec727e1068c3ac2cab7f95fb88c5d4d101e28e17.
Revert "Basic implementation of exporting all materials in a .zip archive"
This reverts commit bdcaef134f556f455f352786123476ec40e3ae4c.
Revert "Implement default path for exporting all materials"
This reverts commit e66783664bf73dd9b1e3c6af6f01321763470d2e.
Revert "Implement a sync button and file dialogue to export all materials"
This reverts commit abba3bdd10a994a1b38bcb426a27ba379febeac7.
Revert "Add notion of whether printers support the material export archive"
This reverts commit f436cb8e7b879a8913b25f2a049413ec0721f1c5.
One of our engineers found experimentally that his 60mm model was crashing into the gantry. And indeed it is confirmed with the designs of the UM3/S5 print head that the space between the nozzle tip and bottom of the gantry is 57mm. Allowing for some play in the dimensions of the print head and the positioning of the nozzle in the print head, 55mm is agreed as a safe distance.
Fixes issue CURA-8182.
Conflicts:
plugins/VersionUpgrade/VersionUpgrade460to462/VersionUpgrade460to462.py -> On master we removed the getCfgVersion function, while we moved the entire plug-in to a different folder in 4.6.
resources/definitions/skriware_2.def.json -> On master we merged a PR that changes more or less all settings, while on 4.6 we doubled the maximum deviation.
