GitHub-Proxy/ESP3D
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git synced 2025-08-14 00:26:02 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Luc 2015-07-24 05:36:22 +08:00
parent df9856e51c
commit 93333ef96c
1 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
README.md
View File

@ -13,7 +13,7 @@ Have a front end to know what is the wifi status (implemented) or know what is t
Should be compatible with reprap printer (Marlin FW/Repetier FW)
##Hardware connection
--Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
--Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
--Use GPIO0 to ground to be in update mode
--Use a switch to reset/disable module
<img src=https://raw.githubusercontent.com/luc-github/ESP8266/master/Wires.png><br>
@ -21,7 +21,7 @@ For Davinci Board:<BR>
<img src=https://raw.githubusercontent.com/luc-github/ESP8266/master/davinci.png><br>
##Development
Currently using [Arduino IDE 1.6.4](http://arduino.cc/en/Main/Software) with the esp8266 module from board manager added from [github.com/esp8266/Arduino](https://github.com/esp8266/Arduino)
Currently using [Arduino IDE 1.6.5](http://arduino.cc/en/Main/Software) with the esp8266 module from board manager added from [github.com/esp8266/Arduino](https://github.com/esp8266/Arduino)
using relased version (http://arduino.esp8266.com/package_esp8266com_index.json)
and staging version (http://arduino.esp8266.com/staging/package_esp8266com_index.json)
@ -58,7 +58,8 @@ Mask: 255.255.255.0
GW:192.168.0.1
Baud rate: 9600
Web port:80
Data port: 8888
Data port: 8888
Web Page refresh: 3 secondes
These are the UI when css is in cache or internet is available:
<img src=https://raw.githubusercontent.com/luc-github/ESP8266/master/Page1.png><br>