GitHub-Proxy/ESP3D
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git synced 2025-08-04 14:51:17 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
ESP3D/wiki/Trigorilla.md
Luc 5097084297 Move issue tracker images to wiki 
Move all direct commands documents to wiki
2020-10-04 11:12:51 +02:00

704 B
Raw Blame History

Where to connect ESP on Anycubic i3 mega - Trigorilla 8bit board

To connect the ESP12e to the UART0. (Credits:https://www.lesimprimantes3d.fr/forum/profile/197-murdock/).
(Green = RX, Blue = TX)
5V (buck to 3.3v if directly connect to ESP - most development ESP boards already have this voltage limited built-in - but check!) and GND can be taken from the AUX3 exposed connector.
UART0 is normally used by USB port so don't use both together - so this hack piggybacks on that same port at UART level.