Alessandro Ranellucci
8fe15d0162
Adjust the top layer thickness in order to match the original object height. #2978
2017-03-14 17:26:27 +01:00
Alessandro Ranellucci
53fee67489
New experimental option z_steps_per_mm. #1827
2017-03-14 16:46:11 +01:00
Joseph Lenox
0741ecc2aa
Add weight/cost output to gcode. On the way to #647 ( #3669 )
...
* Add weight/cost output to gcode. On the way to #647
* added total cost/weight to Extruder statistics, mocked up addendum to status bar change.
* Added second information box that populates after exporting gcode for sliced statistics.
* Changed filament density to use g/cm^3. Extended tooltip to indicate calculation methods.
* Hide sliced info box when gcode export hasn't been done.
* Remove if invalidated and we have background processing or the configuration changes.
* Called layout after every Hide/Show call to ensure that it is placed correctly on different platforms.
Changed output units to cm/cm^3
Conflicts:
lib/Slic3r/GUI/Plater.pm
2017-03-10 17:36:14 -06:00
Alessandro Ranellucci
49a9492ad2
Allow any layer height and limit it to the smallest nozzle diameter. #2706
2016-12-21 20:35:06 +01:00
Alessandro Ranellucci
32fdd4d7ee
Ported _slice_region() to C++/XS
2016-12-20 20:51:07 +01:00
Alessandro Ranellucci
11ed3d8cf3
Fix regression causing top/bottom solid layer number not to be enforced for some slopes. #2750
2016-12-19 15:24:06 +01:00
Alessandro Ranellucci
d47f6d30af
Ported detect_surfaces_type() to XS/C++
2016-11-26 16:58:23 +01:00
Alessandro Ranellucci
66591bcc55
Ported make_perimeters() and infill() to C++/XS, use pure C++ threads
2016-11-26 12:28:39 +01:00
bubnikv
335638a614
Documented perl modules.
...
Conflicts:
lib/Slic3r.pm
lib/Slic3r/Config.pm
2016-11-24 15:38:59 +01:00
Alessandro Ranellucci
103ec05774
Ported infill to XS/C++. Credits and many thanks go to @bubnikv for this work
2016-11-24 15:32:32 +01:00
Joseph Lenox
849b232882
Merge pull request #3355 from lordofhyphens/gcode_speedup
...
Fix of git #3293 More efficient GCode export
2016-06-30 08:17:53 -05:00
Joseph Lenox
f56799e9d5
infill_only_where_needed is incompatible with spiral_vase, enforced.
...
Also ensured that support is disabled if spiral_vase is on.
Added a secondary check to make sure that clip_fill_surfaces does not run if we're in spiral_vase.
2016-06-29 19:30:21 -05:00
bubnikv
5f521b24c4
Fix of git #3293 : More efficient GCode export
...
This fixes two problems of repeatedly copying data from the C++ layer
to perl, by factoring the copying out of an inner loop.
2016-06-02 20:48:56 -05:00
Alessandro Ranellucci
4fad87e438
Fixed float comparison in combine_infill
2016-03-13 12:24:03 +01:00
Alessandro Ranellucci
a32937cef2
Refactoring: new Layer::make_fill() method
2016-02-20 20:51:07 +01:00
Alessandro Ranellucci
9dc0514844
Use bridge flow and speed for solid_infill_every_layers
2015-12-19 12:48:48 +01:00
Alessandro Ranellucci
321b1a90a2
Two fixes for --debug
2015-11-08 09:13:26 +01:00
Alessandro Ranellucci
198dc7d3bd
When background processing fails because of an error, display it in an explicit dialog
2015-11-04 19:28:25 +01:00
Alessandro Ranellucci
a25757a66d
Fixed regression causing empty prints to hang. #3107
2015-11-04 19:20:34 +01:00
Alessandro Ranellucci
2811af349a
Added a new grid infill pattern
2015-11-01 19:03:11 +01:00
Alessandro Ranellucci
9fcec10737
Finished porting LayerRegion to C++
2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
440af2c81c
Bugfix: bridge anchors were shortened under rare circumstances
2015-07-03 23:38:41 +02:00
Alessandro Ranellucci
ee66392e11
Fix numerical issues causing incomplete raft under certain circumstances. Includes a minor refactoring of raft layer logic. #2723
2015-06-02 19:44:29 +02:00
Alessandro Ranellucci
13b63d06ed
Use thick raft layers as we do for support material layers. #2723
2015-03-09 20:00:55 +01:00
Alessandro Ranellucci
8654537e55
Use support material layer height for raft layer instead of object layer height. #2723
2015-03-09 19:36:23 +01:00
Alessandro Ranellucci
d8ee9dd5f5
Limit first object layer height correctly when using a larger support material extruder. #2722
2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
45c91b2ae9
Don't trigger extra perimeters when less than 30% of the upper loops would benefit from it. #2664 . Also fixes #2610
2015-02-24 00:34:43 +01:00
Alessandro Ranellucci
e88cf466fe
A couple notes about infill_only_where_needed
2015-02-23 00:55:00 +01:00
Alessandro Ranellucci
2655f3f816
Better and more robust implementation of infill_only_where_needed
2015-02-23 00:44:51 +01:00
Chow Loong Jin
073681a50a
Get first_layer_extrusion_width from PrintConfig instead of PrintObjectConfig
...
This fixes an issue where the support material doesn't honour a custom first
layer extrusion width.
Fixes : #2662
2015-02-17 13:59:46 +08:00
Alessandro Ranellucci
c0f453f83e
Simpler and more robust implementation of extra perimeters. #2395
2015-02-15 21:58:14 +01:00
Alessandro Ranellucci
6eb1fa36ed
Bugfix: bridge speed was still used for first object layer above raft when support_material_contact_distance == 0. Includes regression tests. #2656
2015-02-14 12:47:33 +01:00
Alessandro Ranellucci
fe4f79ba90
Fixed regression causing random loss of infill because of corrupt thin polygons returned by Clipper. #2539
2015-01-30 10:12:31 +01:00
Alessandro Ranellucci
7b980c1dc9
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
9f0283f808
Minor issue when dealing with files with empty layers at bottom. #2553
2015-01-18 12:35:05 +01:00
Alessandro Ranellucci
04aa240265
Only apply perimeter/infill overlap to the endpoints of rectilinear infill (and do that in a more proper way)
2015-01-13 20:55:20 +01:00
Alessandro Ranellucci
4848cb7606
Ported PrintObject::bridge_over_infill() to XS
2014-12-24 10:20:55 +01:00
Alessandro Ranellucci
5d3cd792eb
Make infill_only_where_needed idempotent. #2198
2014-12-24 01:29:36 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
e9166a8fe6
Use a semaphore to synchronize threads instead of blocking with join(). Lock threads array in order to ensure all of them are signalled. #2394
2014-12-13 15:01:53 +01:00
Alessandro Ranellucci
360dee862b
Keep model objects aligned to Z = 0 in plater
2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
d350241da3
Make combine_infill() completely idempotent. Includes unit testing
2014-12-08 21:23:42 +01:00
Alessandro Ranellucci
9a9ba02d85
Bugfix: infill was not correctly generated when infill_every_layers was used along with raft_layers. Includes regression test. #2396
2014-12-08 20:14:04 +01:00
Alessandro Ranellucci
eb23990d6d
Ported PrintObject::total_layer_count() to XS
2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
c7f5753a28
Ported PrintObject::bounding_box() to XS
2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
33fe53fd7c
Ported three PrintObject methods to XS
2014-11-13 00:34:56 +01:00
Alessandro Ranellucci
334086d605
Bugfix: skirt and brim were not recalculated when objects where just moved in plater
2014-11-12 23:28:42 +01:00
Alessandro Ranellucci
b69caff93c
Ported LayerRegion::make_slices() to XS
2014-11-09 16:24:07 +01:00
Alessandro Ranellucci
3e4c572164
Ported some methods including add_model_object() and apply_config() to XS
2014-11-09 12:25:59 +01:00
