Martin Šach
258882ca5a
Fix SPE-2304. Rear seam not respecting paiting.
...
If a rear seam was projected it was not respecting seam paiting,
because it continued to search the points even if they had
'worse' point_type (e.g. common/blocker). Now the search
is aborted if there is an enforcer and it is not picked.
2024-05-20 16:49:25 +02:00
YuSanka
e95cc5d09c
Follow-up 26d52595 - Fixed a crash after switching from "Settings in separate dialog" mode to "Old" mode,
...
when "Connect" tab is selected
(SPE-2314)
2024-05-20 16:47:07 +02:00
YuSanka
70d7911ee3
DoubleSliderForLayers improvements:
...
1. Fixed tooltips on ticks
2. Implemented posibility to edit colored band and ticks
2024-05-20 16:46:28 +02:00
DJ Delorie
e405d75a52
Fix skirt separation math (SPE-2285, PR#12621)
...
In the code as-is, the half-width of the skirt extrusion is
added to the user-specified distance. However, the user-specified
distance is scaled to internal units while the half-width is not,
resulting in math like "250000 + 0.125" for a skirt extrusion of
0.5mm
The fix is to include the half-width inside the scaling function
so that it is also scaled, resulting in math like "250000 + 125000".
The user-visible result is that if you have no brim and set the
skirt spacing to zero, the skirt will actually touch the model
and not be offset by half an extrusion width.
2024-05-20 16:44:25 +02:00
YuSanka
d0e70e035a
Follow-up 26d52595 : Fixed a crash on move the GCodeViewer on other monitor
2024-05-20 16:42:54 +02:00
Roman Tyr
281b5632d9
Added values for SLA material profiles.
2024-05-20 16:07:42 +02:00
David Kocik
3e1baf0a61
Do not poll printers when window is not active.
2024-05-20 15:35:35 +02:00
David Kocik
835e6d4805
Fix of path sharing during upload.
2024-05-20 15:06:56 +02:00
Lukas Matena
569a28c45e
Couple more improvements / fixes:
...
- 'Tilt profiles' renamed to 'Profiles settings'
- Area fill and delay before/after exposure are now showed in Normal mode
- Fixed and refactored calculation of time estimates
- Changed '+ / -' to the respective unicode character
- Tolerance added into print statistics
2024-05-20 14:55:33 +02:00
YuSanka
9c365a9f91
Renamed tower/tilt profile to speed (back end only)
2024-05-20 14:55:33 +02:00
YuSanka
1bc0a65106
Added JsonUtils to post-process written json (backported from master)
2024-05-20 14:55:33 +02:00
Lukas Matena
06dffc3f80
Renamed tower/tilt profile to speed (UI only)
2024-05-20 14:40:30 +02:00
Lukas Matena
a54a7e1aac
Added an error message when tilt would be disabled
2024-05-20 14:40:23 +02:00
YuSanka
896e265f5e
New time estimation for PrusaSla printers
2024-05-20 14:40:14 +02:00
YuSanka
12ece082bd
SLA tilt profiles: Show/Hide tilt profiles in respect to the printer model.
...
Note: Tilt profiles are supported for SL1, SL1S and M1 only.
2024-05-20 14:30:54 +02:00
YuSanka
d842a084f0
Follow up dbcd2b59 - Fixed values for tilt and tower profiles
2024-05-20 14:30:40 +02:00
Lukas Matena
60981059f6
Updated tooltips for the new parameters
2024-05-20 14:30:01 +02:00
Lukas Matena
763c02f218
Added a 'layer statistics' legend for SLA
2024-05-20 14:29:43 +02:00
YuSanka
79ec60a049
SLA: Save config.json which contains tilt parameters into sl1s output archive.
2024-05-20 14:09:33 +02:00
YuSanka
f5acac1022
Material Settings: Added tilt parameters
...
+ "area_fill" is moved to Material Settings
+ "Tilt times" group is removed from SLA Printer Settings
+ Processed disabling/enabling of some parameters in respect to "use_tilt"
+ Implemented configuration option for vector of Enums
2024-05-20 14:09:23 +02:00
David Kocik
e553ac5360
Fix of webview dialog closing.
...
Custom script message handlers.
2024-05-20 13:06:48 +02:00
David Kocik
84653cc984
Remove "total" from status line.
2024-05-17 15:13:31 +02:00
David Kocik
e3d41bc814
Polling 10 seconds
2024-05-17 15:07:31 +02:00
David Kocik
9f95549dcf
Pass path string without converting to boost
2024-05-17 12:19:02 +02:00
Ben Greiner
0b7616c121
Remove deprecated boost filesystem convenience include (PR #12652 )
2024-05-17 11:40:39 +02:00
Lukáš Hejl
e305594f2b
Fix a compiler warning in TriangleSelector.
2024-05-17 01:38:46 +02:00
David Kocik
9a5fee2d19
Upload path fix
2024-05-16 19:14:21 +02:00
David Kocik
2c09c034b3
Remove deprecated arguments from connect upload
2024-05-16 18:04:11 +02:00
David Kocik
c0aa09791f
fix of upload filename
2024-05-16 16:19:08 +02:00
David Kocik
64c497ce0d
Upload to Connect changes
2024-05-16 16:19:08 +02:00
David Kocik
1264f57f84
Compatible printer check when sending uuid to connect.
2024-05-16 16:19:07 +02:00
David Kocik
535ecf7b34
Passing filename to Connect PrinterPick
2024-05-16 16:19:07 +02:00
David Kocik
5e5f2c493d
New request naming
2024-05-16 16:19:07 +02:00
David Kocik
7c63c2dbfb
WIP new upload
2024-05-16 16:19:07 +02:00
David Kocik
65a581a026
Use only uuid from Connect request and get rest of the data from endpoint
2024-05-16 16:19:07 +02:00
David Kocik
98ec4e808d
Remove script handler on EndModal.
2024-05-16 16:19:07 +02:00
David Kocik
9435515a8c
Resend config to connect on new access token.
2024-05-16 16:19:07 +02:00
David Kocik
df40aecacc
New Connect adresses.
2024-05-16 16:19:07 +02:00
David Kocik
cb265cdfee
use boost::nowide::fopen to store avatar
2024-05-16 16:19:06 +02:00
David Kocik
44cf71390b
Passing uuid from connect webview to connect printerpick
...
TODO: More sofisticated logic to pass or not pass uuid
2024-05-16 16:19:06 +02:00
David Kocik
76d7af0b05
Add developer panel and error handling to webview dialog
2024-05-16 16:19:06 +02:00
David Kocik
32d2115334
Set user agent to SLIC3R_APP_FULL_NAME
2024-05-16 16:19:06 +02:00
David Kocik
f83213d958
Fix of opening avatar file for write.
2024-05-16 16:19:06 +02:00
David Kocik
2de65cfa6a
Do not escape upload path in PrusaConnectNew init_upload
2024-05-16 16:19:06 +02:00
David Kocik
f6e8a1e898
Do not set user agent on webview creation. It caused not loading of the webview edge backend when running 2 different versions of PS.
2024-05-16 16:19:06 +02:00
David Kocik
79a7abeca6
nozzle_diameter changed to printer_variant
2024-05-16 16:19:06 +02:00
David Kocik
859bc9c786
Use printer_variant to compare nozzle diameter in connect printer state.
...
Do not concider models without nozzle.
2024-05-16 16:19:06 +02:00
Lukáš Hejl
0cfbb5a437
Merge branch 'lh_shrinkage_compensation'
2024-05-14 17:16:38 +02:00
Lukáš Hejl
61cd0beaa9
SPE-2186: Allow to show at the same time both warnings about that bed temperature difference and shrinkage compensation weren't used.
2024-05-14 17:16:23 +02:00
Lukáš Hejl
4b8fe98443
SPE-2186: Add shrinkage compensation into filament settings.
...
There is a limitation that on multi-tool printers, all used filaments must have the same shrinkage compression values.
2024-05-14 17:16:23 +02:00
