# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
msgid ""
msgstr ""
"Project-Id-Version: Slic3rPE\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-04-02 12:49+0200\n"
"PO-Revision-Date: 2022-12-06 17:21+0800\n"
"Last-Translator: BiseChen <bise.chen@gmail.com>\n"
"Language-Team: \n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 3.2.2\n"

#. TRN: Following strings are labels in the G-code Viewer legend.
#: src/libslic3r/ExtrusionRole.cpp:42
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:34
#: src/slic3r/GUI/GCodeViewer.cpp:400 src/slic3r/GUI/GCodeViewer.cpp:409
#: src/slic3r/GUI/GCodeViewer.cpp:424
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:913
msgid "Unknown"
msgstr "未知"

#: src/libslic3r/ExtrusionRole.cpp:43 src/libslic3r/ExtrusionRole.cpp:64
#: src/slic3r/GUI/GCodeViewer.cpp:410
msgid "Perimeter"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:44 src/libslic3r/ExtrusionRole.cpp:66
#: src/slic3r/GUI/GCodeViewer.cpp:411
msgid "External perimeter"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:45 src/libslic3r/ExtrusionRole.cpp:68
#: src/slic3r/GUI/GCodeViewer.cpp:412
msgid "Overhang perimeter"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:46 src/libslic3r/ExtrusionRole.cpp:70
#: src/slic3r/GUI/GCodeViewer.cpp:413
msgid "Internal infill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:47 src/libslic3r/ExtrusionRole.cpp:72
#: src/libslic3r/PrintConfig.cpp:1806 src/libslic3r/PrintConfig.cpp:2986
#: src/libslic3r/PrintConfig.cpp:2998 src/slic3r/GUI/GCodeViewer.cpp:414
msgid "Solid infill"
msgstr "實心填充"

#: src/libslic3r/ExtrusionRole.cpp:48 src/libslic3r/ExtrusionRole.cpp:74
#: src/libslic3r/PrintConfig.cpp:1815 src/libslic3r/PrintConfig.cpp:3576
#: src/libslic3r/PrintConfig.cpp:3589 src/slic3r/GUI/GCodeViewer.cpp:415
msgid "Top solid infill"
msgstr "頂部實心填充"

#: src/libslic3r/ExtrusionRole.cpp:49 src/libslic3r/ExtrusionRole.cpp:76
#: src/libslic3r/PrintConfig.cpp:2001 src/libslic3r/PrintConfig.cpp:2057
#: src/libslic3r/PrintConfig.cpp:2069 src/libslic3r/PrintConfig.cpp:2079
#: src/libslic3r/PrintConfig.cpp:2087 src/libslic3r/PrintConfig.cpp:2089
#: src/slic3r/GUI/GCodeViewer.cpp:416 src/slic3r/GUI/GUI_Factories.cpp:162
#: src/slic3r/GUI/Tab.cpp:1504
msgid "Ironing"
msgstr "熨平表面"

#: src/libslic3r/ExtrusionRole.cpp:50 src/libslic3r/ExtrusionRole.cpp:78
#: src/slic3r/GUI/GCodeViewer.cpp:417
msgid "Bridge infill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:51 src/libslic3r/ExtrusionRole.cpp:80
#: src/libslic3r/PrintConfig.cpp:1727 src/slic3r/GUI/GCodeViewer.cpp:418
msgid "Gap fill"
msgstr "填補空隙"

#: src/libslic3r/ExtrusionRole.cpp:52 src/libslic3r/ExtrusionRole.cpp:82
#: src/slic3r/GUI/GCodeViewer.cpp:419
msgid "Skirt/Brim"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:53 src/libslic3r/ExtrusionRole.cpp:84
#: src/libslic3r/PrintConfig.cpp:992 src/libslic3r/PrintConfig.cpp:2572
#: src/libslic3r/PrintConfig.cpp:2581 src/libslic3r/PrintConfig.cpp:2590
#: src/libslic3r/PrintConfig.cpp:2600 src/libslic3r/PrintConfig.cpp:2609
#: src/libslic3r/PrintConfig.cpp:3159 src/libslic3r/PrintConfig.cpp:3165
#: src/libslic3r/PrintConfig.cpp:3173 src/libslic3r/PrintConfig.cpp:3186
#: src/libslic3r/PrintConfig.cpp:3196 src/libslic3r/PrintConfig.cpp:3203
#: src/libslic3r/PrintConfig.cpp:3219 src/libslic3r/PrintConfig.cpp:3235
#: src/libslic3r/PrintConfig.cpp:3256 src/libslic3r/PrintConfig.cpp:3269
#: src/libslic3r/PrintConfig.cpp:3285 src/libslic3r/PrintConfig.cpp:3300
#: src/libslic3r/PrintConfig.cpp:3318 src/libslic3r/PrintConfig.cpp:3328
#: src/libslic3r/PrintConfig.cpp:3337 src/libslic3r/PrintConfig.cpp:3348
#: src/libslic3r/PrintConfig.cpp:3360 src/libslic3r/PrintConfig.cpp:3374
#: src/libslic3r/PrintConfig.cpp:3382 src/libslic3r/PrintConfig.cpp:3383
#: src/libslic3r/PrintConfig.cpp:3392 src/libslic3r/PrintConfig.cpp:3406
#: src/libslic3r/PrintConfig.cpp:3416 src/libslic3r/PrintConfig.cpp:3430
#: src/libslic3r/PrintConfig.cpp:3438 src/libslic3r/PrintConfig.cpp:3450
#: src/libslic3r/PrintConfig.cpp:3462 src/libslic3r/PrintConfig.cpp:3473
#: src/libslic3r/PrintConfig.cpp:3486 src/libslic3r/PrintConfig.cpp:3499
#: src/libslic3r/PrintConfig.cpp:3515 src/libslic3r/PrintConfig.cpp:3525
#: src/slic3r/GUI/GCodeViewer.cpp:420 src/slic3r/GUI/GUI_Factories.cpp:89
#: src/slic3r/GUI/GUI_Factories.cpp:164 src/slic3r/GUI/Tab.cpp:1539
#: src/slic3r/GUI/Tab.cpp:1541
msgid "Support material"
msgstr "支撐材料"

#: src/libslic3r/ExtrusionRole.cpp:54 src/libslic3r/ExtrusionRole.cpp:86
#: src/libslic3r/PrintConfig.cpp:3336 src/slic3r/GUI/GCodeViewer.cpp:421
msgid "Support material interface"
msgstr "支撐材質介面"

#: src/libslic3r/ExtrusionRole.cpp:55 src/libslic3r/ExtrusionRole.cpp:88
#: src/libslic3r/PrintConfig.cpp:1824 src/slic3r/GUI/GCodeViewer.cpp:422
#: src/slic3r/GUI/Tab.cpp:1650
msgid "Wipe tower"
msgstr "擦拭塔"

#: src/libslic3r/ExtrusionRole.cpp:56 src/libslic3r/ExtrusionRole.cpp:90
#: src/slic3r/GUI/BedShapeDialog.cpp:92 src/slic3r/GUI/GCodeViewer.cpp:423
#: src/slic3r/GUI/LoadStepDialog.cpp:118
msgid "Custom"
msgstr "自訂"

#: src/libslic3r/ExtrusionRole.cpp:82 src/slic3r/GUI/Tab.cpp:1527
msgid "Skirt"
msgstr "側裙"

#: src/libslic3r/Flow.cpp:73
#, boost-format
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr "無法計算 %1% 的擠出寬度：無法存取變數 \"%2%\"。"

#: src/libslic3r/Format/3mf.cpp:1044
#, boost-format
msgid ""
"The 3MF file does not contain a valid mesh.\n"
"\n"
"\"%1%\""
msgstr ""

#: src/libslic3r/Format/3mf.cpp:2241
#, boost-format
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr "所選 3mf 檔案已使用較新版本的 %1% 保存，並且不相容。"

#: src/libslic3r/Format/3mf.cpp:2252
msgid ""
"The selected 3MF contains FDM supports painted object using a newer version "
"of PrusaSlicer and is not compatible."
msgstr ""
"所選 3MF 包含 FDM 支援使用較新版本的 PrusaSlicer 繪製的模型並且不相容。"

#: src/libslic3r/Format/3mf.cpp:2256
msgid ""
"The selected 3MF contains seam painted object using a newer version of "
"PrusaSlicer and is not compatible."
msgstr "所選 3MF 包含使用較新版本 PrusaSlicer 的接縫繪製模型，並且不相容。"

#: src/libslic3r/Format/3mf.cpp:2260
msgid ""
"The selected 3MF contains multi-material painted object using a newer "
"version of PrusaSlicer and is not compatible."
msgstr "所選 3MF 包含使用更新版本的 PrusaSlicer 的多材料繪製模型，並且不相容。"

#: src/libslic3r/Format/AMF.cpp:1005
#, boost-format
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr "所選的 amf 檔案已使用較新版本的 %1% 保存並且不相容。"

#: src/libslic3r/GCode/PostProcessor.cpp:291
#, boost-format
msgid ""
"Post-processing script %1% failed.\n"
"\n"
"The post-processing script is expected to change the G-code file %2% in "
"place, but the G-code file was deleted and likely saved under a new name.\n"
"Please adjust the post-processing script to change the G-code in place and "
"consult the manual on how to optionally rename the post-processed G-code "
"file.\n"
msgstr ""
"後處理腳本 %1% 失敗。\n"
"\n"
"後處理腳本預計會更改 G-code檔案 %2%，但 G-code檔案已被刪除並可能以新名稱保"
"存。\n"
"請調整後處理腳本以更改 G-code，並查閱手冊以了解如何有選擇地重命名後處理的 G-"
"code檔案。\n"

#: src/libslic3r/GCode.cpp:357
msgid "There is an object with no extrusions in the first layer."
msgstr "第一層有一個沒有擠出的模型。"

#: src/libslic3r/GCode.cpp:358 src/libslic3r/PrintObjectSlice.cpp:904
#: src/libslic3r/PrintObjectSlice.cpp:920
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:183
msgid "Object name"
msgstr "模型名稱"

#: src/libslic3r/GCode.cpp:388
#, boost-format
msgid "Empty layer between %1% and %2%."
msgstr "%1% 和 %2% 之間的空層。"

#: src/libslic3r/GCode.cpp:391
msgid "(Some lines not shown)"
msgstr "（部分的線未顯示）"

#: src/libslic3r/GCode.cpp:393
#, boost-format
msgid "Object name: %1%"
msgstr "模型名稱：%1%"

#: src/libslic3r/GCode.cpp:394
msgid ""
"Make sure the object is printable. This is usually caused by negligibly "
"small extrusions or by a faulty model. Try to repair the model or change its "
"orientation on the bed."
msgstr ""
"請確保模型是可打印的。這通常是由容易忽略的小擠壓或錯誤之所模型引起的。請嘗試"
"修復模型或改變其在載台上的方向。"

#: src/libslic3r/GCode.cpp:527 src/libslic3r/PrintConfig.cpp:3062
#: src/libslic3r/PrintConfig.cpp:3072 src/slic3r/GUI/Tab.cpp:2340
#: src/slic3r/GUI/Tab.cpp:2850
msgid "Start G-code"
msgstr "啟動 G-code"

#: src/libslic3r/GCode.cpp:528 src/libslic3r/PrintConfig.cpp:1007
#: src/libslic3r/PrintConfig.cpp:1017 src/slic3r/GUI/Tab.cpp:2351
#: src/slic3r/GUI/Tab.cpp:2864
msgid "End G-code"
msgstr "結束 G-code"

#: src/libslic3r/GCode.cpp:529 src/libslic3r/PrintConfig.cpp:632
#: src/slic3r/GUI/Tab.cpp:2875
msgid "Before layer change G-code"
msgstr "換層前G-code"

#: src/libslic3r/GCode.cpp:530 src/libslic3r/PrintConfig.cpp:2096
#: src/slic3r/GUI/Tab.cpp:2886
msgid "After layer change G-code"
msgstr "換層後G-code"

#: src/libslic3r/GCode.cpp:531 src/libslic3r/PrintConfig.cpp:3564
#: src/slic3r/GUI/Tab.cpp:2897
msgid "Tool change G-code"
msgstr "工具替換 G-code"

#: src/libslic3r/GCode.cpp:532 src/slic3r/GUI/Tab.cpp:2908
msgid "Between objects G-code (for sequential printing)"
msgstr "模型之間 G-code （用於順序打印）"

#: src/libslic3r/GCode.cpp:533 src/slic3r/GUI/Tab.cpp:2919
msgid "Color Change G-code"
msgstr "顏色變化 G-code"

#: src/libslic3r/GCode.cpp:534 src/libslic3r/PrintConfig.cpp:3098
#: src/slic3r/GUI/Tab.cpp:2929
msgid "Pause Print G-code"
msgstr "暫停打印 G-code"

#: src/libslic3r/GCode.cpp:535 src/slic3r/GUI/Tab.cpp:2939
msgid "Template Custom G-code"
msgstr "自定義範本 G-code"

#: src/libslic3r/GCode.cpp:538
msgid "Filament Start G-code"
msgstr "線材的啟動 G-code"

#: src/libslic3r/GCode.cpp:545
msgid "Filament End G-code"
msgstr "線材的結束 G-code"

#: src/libslic3r/GCode.cpp:553 src/libslic3r/PrintConfig.cpp:3107
#: src/slic3r/GUI/GCodeViewer.cpp:396 src/slic3r/GUI/Tab.cpp:2339
#: src/slic3r/GUI/Tab.cpp:2849 src/slic3r/GUI/Tab.cpp:5099
msgid "Custom G-code"
msgstr "自定義 G-code"

#: src/libslic3r/GCode.cpp:605
msgid "In the custom G-code were found reserved keywords:"
msgstr "在自定義 G-code中發現了保留關鍵字："

#: src/libslic3r/GCode.cpp:607
msgid ""
"This may cause problems in g-code visualization and printing time estimation."
msgstr "這可能會導致 G-code 可視化和打印時間的估計出現問題。"

#: src/libslic3r/GCode.cpp:1138 src/libslic3r/GCode.cpp:1149
msgid "No extrusions were generated for objects."
msgstr "沒有為模型產生擠壓。"

#: src/libslic3r/GCode.cpp:1375
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr "您的打印件非常接近打底的區域。請確保沒有碰到。"

#: src/libslic3r/miniz_extension.cpp:96
msgid "undefined error"
msgstr "未定義的錯誤"

#: src/libslic3r/miniz_extension.cpp:98
msgid "too many files"
msgstr "檔案太多"

#: src/libslic3r/miniz_extension.cpp:100
msgid "file too large"
msgstr "檔案過大"

#: src/libslic3r/miniz_extension.cpp:102
msgid "unsupported method"
msgstr "不受支援的方法"

#: src/libslic3r/miniz_extension.cpp:104
msgid "unsupported encryption"
msgstr "不支援的加密方式"

#: src/libslic3r/miniz_extension.cpp:106
msgid "unsupported feature"
msgstr "不支援的功能"

#: src/libslic3r/miniz_extension.cpp:108
msgid "failed finding central directory"
msgstr "找不到中央目錄"

#: src/libslic3r/miniz_extension.cpp:110
msgid "not a ZIP archive"
msgstr "不是 ZIP 存檔"

#: src/libslic3r/miniz_extension.cpp:112
msgid "invalid header or archive is corrupted"
msgstr "無效的標頭或存檔已損壞"

#: src/libslic3r/miniz_extension.cpp:114
msgid "unsupported multidisk archive"
msgstr "不支援的多磁碟機存檔"

#: src/libslic3r/miniz_extension.cpp:116
msgid "decompression failed or archive is corrupted"
msgstr "解壓失敗或存檔損壞"

#: src/libslic3r/miniz_extension.cpp:118
msgid "compression failed"
msgstr "壓縮失敗"

#: src/libslic3r/miniz_extension.cpp:120
msgid "unexpected decompressed size"
msgstr "意外的解壓縮大小"

#: src/libslic3r/miniz_extension.cpp:122
msgid "CRC-32 check failed"
msgstr "CRC-32 校驗失敗"

#: src/libslic3r/miniz_extension.cpp:124
msgid "unsupported central directory size"
msgstr "不支援的中央目錄大小"

#: src/libslic3r/miniz_extension.cpp:126
msgid "allocation failed"
msgstr "分配失敗"

#: src/libslic3r/miniz_extension.cpp:128
msgid "file open failed"
msgstr "檔案打開失敗"

#: src/libslic3r/miniz_extension.cpp:130
msgid "file create failed"
msgstr "檔案建立失敗"

#: src/libslic3r/miniz_extension.cpp:132
msgid "file write failed"
msgstr "檔案寫入失敗"

#: src/libslic3r/miniz_extension.cpp:134
msgid "file read failed"
msgstr "檔案讀取失敗"

#: src/libslic3r/miniz_extension.cpp:136
msgid "file close failed"
msgstr "檔案關閉失敗"

#: src/libslic3r/miniz_extension.cpp:138
msgid "file seek failed"
msgstr "檔案尋找失敗"

#: src/libslic3r/miniz_extension.cpp:140
msgid "file stat failed"
msgstr "檔案統計失敗"

#: src/libslic3r/miniz_extension.cpp:142
msgid "invalid parameter"
msgstr "無效的參數"

#: src/libslic3r/miniz_extension.cpp:144
msgid "invalid filename"
msgstr "無效的檔案名"

#: src/libslic3r/miniz_extension.cpp:146
msgid "buffer too small"
msgstr "緩衝區太小"

#: src/libslic3r/miniz_extension.cpp:148
msgid "internal error"
msgstr "內部錯誤"

#: src/libslic3r/miniz_extension.cpp:150
msgid "file not found"
msgstr "找不到檔"

#: src/libslic3r/miniz_extension.cpp:152
msgid "archive is too large"
msgstr "存檔太大"

#: src/libslic3r/miniz_extension.cpp:154
msgid "validation failed"
msgstr "驗證失敗"

#: src/libslic3r/miniz_extension.cpp:156
msgid "write calledback failed"
msgstr "寫入calledback 失敗"

#: src/libslic3r/Preset.cpp:1644 src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
msgid "print"
msgstr "打印"

#: src/libslic3r/Preset.cpp:1645 src/slic3r/GUI/ConfigWizard.cpp:1004
msgid "filament"
msgstr "線材"

#: src/libslic3r/Preset.cpp:1646 src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
msgid "SLA print"
msgstr "SLA 打印"

#: src/libslic3r/Preset.cpp:1647 src/slic3r/GUI/ConfigSnapshotDialog.cpp:73
#: src/slic3r/GUI/ConfigWizard.cpp:1004 src/slic3r/GUI/GUI.cpp:217
#: src/slic3r/GUI/Sidebar.cpp:406
msgid "SLA material"
msgstr "SLA 材料"

#: src/libslic3r/Preset.cpp:1648 src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
msgid "printer"
msgstr "打印機"

#: src/libslic3r/Print.cpp:465
msgid "All objects are outside of the print volume."
msgstr "全部的模型都在打印機範圍外。"

#: src/libslic3r/Print.cpp:468
msgid "The supplied settings will cause an empty print."
msgstr "提供的設定將導致空白的打印。"

#: src/libslic3r/Print.cpp:471
msgid ""
"Avoid crossing perimeters option and avoid crossing curled overhangs option "
"cannot be both enabled together."
msgstr ""

#: src/libslic3r/Print.cpp:480
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""
"在螺旋花瓶模式下一次只能打印一個模型。除非刪除除最後一個模型之外的所有模型，"
"或者經由“complete_objects”啟用順序模式。"

#: src/libslic3r/Print.cpp:484
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr "螺旋花瓶選項只能在打印單一材質模型時使用。"

#: src/libslic3r/Print.cpp:488
msgid ""
"Machine limits cannot be emitted to G-Code when Klipper firmware flavor is "
"used. Change the value of machine_limits_usage."
msgstr ""

#: src/libslic3r/Print.cpp:516
#, boost-format
msgid ""
"While the object %1% itself fits the build volume, it exceeds the maximum "
"build volume height because of material shrinkage compensation."
msgstr ""

#: src/libslic3r/Print.cpp:519
#, boost-format
msgid "The object %1% exceeds the maximum build volume height."
msgstr ""

#: src/libslic3r/Print.cpp:522
#, boost-format
msgid ""
"While the object %1% itself fits the build volume, its last layer exceeds "
"the maximum build volume height."
msgstr ""

#: src/libslic3r/Print.cpp:523
msgid ""
"You might want to reduce the size of your model or change current print "
"settings and retry."
msgstr ""

#: src/libslic3r/Print.cpp:540
msgid "Variable layer height is not supported with Organic supports."
msgstr ""

#: src/libslic3r/Print.cpp:557
msgid ""
"The wipe tower is only supported if all extruders use filaments of the same "
"diameter."
msgstr ""

#: src/libslic3r/Print.cpp:564
msgid ""
"The Wipe Tower is currently only supported for the Marlin, Klipper, RepRap/"
"Sprinter, RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:566
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr "擦拭塔目前僅支援相對擠出機定址 (use_relative_e_distances=1)。"

#: src/libslic3r/Print.cpp:568
msgid ""
"Ooze prevention is only supported with the wipe tower when "
"'single_extruder_multi_material' is off."
msgstr ""

#: src/libslic3r/Print.cpp:570
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr "擦拭塔目前不支援容積率 E (use_volumetric_e=0)。"

#: src/libslic3r/Print.cpp:572
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr "多材料順序打印目前不支援擦拭塔。"

#: src/libslic3r/Print.cpp:582
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr "只有在多個模型具有相同的層高時才支援擦拭塔"

#: src/libslic3r/Print.cpp:584
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr "如果有多個模型打印在相同數量的筏板上，擦拭塔僅支援多個模型"

#: src/libslic3r/Print.cpp:587
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"只有使用相同的 support_material_contact_distance 打印的多個模型才支援擦拭塔"

#: src/libslic3r/Print.cpp:589
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr "擦拭塔僅支援多個模型，但他們需要平均切片。"

#: src/libslic3r/Print.cpp:614
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr "只有在所有模型具有相同的可變層高度時才支援擦拭塔"

#: src/libslic3r/Print.cpp:638
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr "一個或多個模型被分配到打印機所不存在的的擠出機。"

#: src/libslic3r/Print.cpp:651
#, boost-format
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr "%1%=%2% mm太低，無法在層高 %3% mm 處打印"

#: src/libslic3r/Print.cpp:654
#, boost-format
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr "過大的 %1%=%2% mm 可打印噴嘴直徑為 %3% mm"

#: src/libslic3r/Print.cpp:671
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""
"若要與可溶性支撐一起使用擦拭塔，\n"
"支撐層必須與目標層同步。"

#: src/libslic3r/Print.cpp:675 src/slic3r/GUI/ConfigManipulation.cpp:200
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"擦拭塔目前僅支援非溶劑支撐\n"
"若它們是使用目前擠出機打印而不是觸發變更噴嘴的打印方式。"
"（support_material_extruder 和 support_material_interface_extruder 兩者都必須"
"設訂為 0）。"

#: src/libslic3r/Print.cpp:684
msgid ""
"Organic support tree tip diameter must not be smaller than support material "
"extrusion width."
msgstr ""

#: src/libslic3r/Print.cpp:686
msgid ""
"Organic support branch diameter must not be smaller than 2x support material "
"extrusion width."
msgstr ""

#: src/libslic3r/Print.cpp:688
msgid ""
"Organic support branch diameter must not be smaller than support tree tip "
"diameter."
msgstr ""

#: src/libslic3r/Print.cpp:722
msgid "First layer height can't be greater than nozzle diameter"
msgstr "不能大於噴嘴直徑"

#: src/libslic3r/Print.cpp:727
msgid "Layer height can't be greater than nozzle diameter"
msgstr "第一層高度不能大於噴嘴直徑"

#: src/libslic3r/Print.cpp:748
msgid ""
"Relative extruder addressing requires resetting the extruder position at "
"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
"layer_gcode."
msgstr ""
"相對擠出機定址需要在每一層重置擠出機位置，以防止浮點精度損失。請將“G92 E0”添"
"加到 layer_gcode。"

#: src/libslic3r/Print.cpp:750
msgid ""
"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
"absolute extruder addressing."
msgstr "在 before_layer_gcode 中發現“G92 E0”，它與絕對擠出機定址不相容。"

#: src/libslic3r/Print.cpp:752
msgid ""
"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
"extruder addressing."
msgstr "在 layer_gcode 中發現“G92 E0”，它與絕對擠出機定址不相容。"

#: src/libslic3r/Print.cpp:932
msgid "Generating skirt and brim"
msgstr "生成側裙和帽緣"

#: src/libslic3r/Print.cpp:995
msgid "Exporting G-code"
msgstr "匯出 G-code"

#: src/libslic3r/Print.cpp:999
msgid "Generating G-code"
msgstr "生成 G-code"

#: src/libslic3r/Print.cpp:1228
msgid "Alert if supports needed"
msgstr ""

#. TRN Alert when support is needed. Describes that the model has long bridging extrusions which may print badly
#: src/libslic3r/Print.cpp:1234
msgid "Long bridging extrusions"
msgstr ""

#. TRN Alert when support is needed. Describes bridge anchors/turns in the air, which will definitely print badly
#: src/libslic3r/Print.cpp:1236
msgid "Floating bridge anchors"
msgstr ""

#. TRN Alert when support is needed. Describes that the print has large overhang area which will print badly or not print at all.
#: src/libslic3r/Print.cpp:1240
msgid "Collapsing overhang"
msgstr ""

#. TRN Alert when support is needed. Describes extrusions that are not supported enough and come out curled or loose.
#: src/libslic3r/Print.cpp:1243
msgid "Loose extrusions"
msgstr ""

#. TRN Alert when support is needed. Describes that the print has low bed adhesion and may became loose.
#: src/libslic3r/Print.cpp:1247
msgid "Low bed adhesion"
msgstr ""

#. TRN Alert when support is needed. Describes that the object has part that is not connected to the bed and will not print at all without supports.
#: src/libslic3r/Print.cpp:1249
msgid "Floating object part"
msgstr ""

#. TRN Alert when support is needed. Describes that the object has thin part that may brake during printing
#: src/libslic3r/Print.cpp:1251
msgid "Thin fragile part"
msgstr ""

#. TRN this translation rule is used to translate lists of uknown size on single line. The first argument is element of the list,
#. the second argument may be element or rest of the list. For most languages, this does not need translation, but some use different
#. separator than comma and some use blank space in front of the separator.
#: src/libslic3r/Print.cpp:1260
#, boost-format
msgid "%1%, %2%"
msgstr ""

#: src/libslic3r/Print.cpp:1359
msgid "Consider enabling supports."
msgstr ""

#: src/libslic3r/Print.cpp:1361
msgid "Also consider enabling brim."
msgstr ""

#. TRN Alert message for detected print issues. first argument is a list of detected issues.
#: src/libslic3r/Print.cpp:1365
#, boost-format
msgid ""
"Detected print stability issues:\n"
"%1%"
msgstr ""

#: src/libslic3r/PrintBase.cpp:84
msgid "Failed processing of the output_filename_format template."
msgstr "處理 output_filename_format 模板失敗。"

#: src/libslic3r/PrintConfig.cpp:354 src/libslic3r/PrintConfig.cpp:355
msgid "Printer technology"
msgstr "打印機技術"

#: src/libslic3r/PrintConfig.cpp:360
msgid "Bed shape"
msgstr "載台的形狀"

#: src/libslic3r/PrintConfig.cpp:365
msgid "Bed custom texture"
msgstr "自定義載台紋理"

#: src/libslic3r/PrintConfig.cpp:370
msgid "Bed custom model"
msgstr "自定義 G-code"

#: src/libslic3r/PrintConfig.cpp:375
msgid "Elephant foot compensation"
msgstr "大象腳補償"

#: src/libslic3r/PrintConfig.cpp:376 src/libslic3r/PrintConfig.cpp:701
#: src/libslic3r/PrintConfig.cpp:1854 src/libslic3r/PrintConfig.cpp:1936
#: src/libslic3r/PrintConfig.cpp:1983 src/libslic3r/PrintConfig.cpp:1994
#: src/libslic3r/PrintConfig.cpp:2008 src/libslic3r/PrintConfig.cpp:2017
#: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/PrintConfig.cpp:2035
#: src/libslic3r/PrintConfig.cpp:2043 src/libslic3r/PrintConfig.cpp:2051
#: src/libslic3r/PrintConfig.cpp:3137 src/libslic3r/PrintConfig.cpp:3147
#: src/libslic3r/PrintConfig.cpp:3797 src/libslic3r/PrintConfig.cpp:3831
#: src/libslic3r/PrintConfig.cpp:3842 src/libslic3r/PrintConfig.cpp:3857
#: src/libslic3r/PrintConfig.cpp:3870 src/libslic3r/PrintConfig.cpp:3879
#: src/libslic3r/PrintConfig.cpp:3891 src/libslic3r/PrintConfig.cpp:4323
#: src/libslic3r/PrintConfig.cpp:4332
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1461
#: src/slic3r/GUI/GUI_Factories.cpp:171 src/slic3r/GUI/Tab.cpp:1466
#: src/slic3r/GUI/Tab.cpp:1517 src/slic3r/GUI/Tab.cpp:1661
#: src/slic3r/GUI/Tab.cpp:1673 src/slic3r/GUI/Tab.cpp:2263
#: src/slic3r/GUI/Tab.cpp:2836 src/slic3r/GUI/Tab.cpp:5982
msgid "Advanced"
msgstr "進階"

#: src/libslic3r/PrintConfig.cpp:377
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr "在第一層 XY 平面按設定值收縮，以補償第一層因擠壓造成的大象腳現象。"

#: src/libslic3r/PrintConfig.cpp:379 src/libslic3r/PrintConfig.cpp:404
#: src/libslic3r/PrintConfig.cpp:411 src/libslic3r/PrintConfig.cpp:666
#: src/libslic3r/PrintConfig.cpp:853 src/libslic3r/PrintConfig.cpp:876
#: src/libslic3r/PrintConfig.cpp:943 src/libslic3r/PrintConfig.cpp:951
#: src/libslic3r/PrintConfig.cpp:1001 src/libslic3r/PrintConfig.cpp:1135
#: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:1164
#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:1416
#: src/libslic3r/PrintConfig.cpp:1628 src/libslic3r/PrintConfig.cpp:1704
#: src/libslic3r/PrintConfig.cpp:1714 src/libslic3r/PrintConfig.cpp:2015
#: src/libslic3r/PrintConfig.cpp:2081 src/libslic3r/PrintConfig.cpp:2279
#: src/libslic3r/PrintConfig.cpp:2340 src/libslic3r/PrintConfig.cpp:2358
#: src/libslic3r/PrintConfig.cpp:2376 src/libslic3r/PrintConfig.cpp:2434
#: src/libslic3r/PrintConfig.cpp:2444 src/libslic3r/PrintConfig.cpp:2574
#: src/libslic3r/PrintConfig.cpp:2583 src/libslic3r/PrintConfig.cpp:2602
#: src/libslic3r/PrintConfig.cpp:2623 src/libslic3r/PrintConfig.cpp:2635
#: src/libslic3r/PrintConfig.cpp:2643 src/libslic3r/PrintConfig.cpp:2700
#: src/libslic3r/PrintConfig.cpp:2722 src/libslic3r/PrintConfig.cpp:2733
#: src/libslic3r/PrintConfig.cpp:2743 src/libslic3r/PrintConfig.cpp:2751
#: src/libslic3r/PrintConfig.cpp:2759 src/libslic3r/PrintConfig.cpp:2853
#: src/libslic3r/PrintConfig.cpp:2862 src/libslic3r/PrintConfig.cpp:2899
#: src/libslic3r/PrintConfig.cpp:3140 src/libslic3r/PrintConfig.cpp:3207
#: src/libslic3r/PrintConfig.cpp:3222 src/libslic3r/PrintConfig.cpp:3321
#: src/libslic3r/PrintConfig.cpp:3330 src/libslic3r/PrintConfig.cpp:3376
#: src/libslic3r/PrintConfig.cpp:3465 src/libslic3r/PrintConfig.cpp:3477
#: src/libslic3r/PrintConfig.cpp:3503 src/libslic3r/PrintConfig.cpp:3618
#: src/libslic3r/PrintConfig.cpp:3710 src/libslic3r/PrintConfig.cpp:3717
#: src/libslic3r/PrintConfig.cpp:3770 src/libslic3r/PrintConfig.cpp:3801
#: src/libslic3r/PrintConfig.cpp:3811 src/libslic3r/PrintConfig.cpp:4008
#: src/libslic3r/PrintConfig.cpp:4017 src/libslic3r/PrintConfig.cpp:4026
#: src/libslic3r/PrintConfig.cpp:4036 src/libslic3r/PrintConfig.cpp:4069
#: src/libslic3r/PrintConfig.cpp:4112 src/libslic3r/PrintConfig.cpp:4122
#: src/libslic3r/PrintConfig.cpp:4134 src/libslic3r/PrintConfig.cpp:4154
#: src/libslic3r/PrintConfig.cpp:4169 src/libslic3r/PrintConfig.cpp:4179
#: src/libslic3r/PrintConfig.cpp:4317 src/libslic3r/PrintConfig.cpp:4325
#: src/libslic3r/PrintConfig.cpp:4370 src/libslic3r/PrintConfig.cpp:4578
#: src/libslic3r/PrintConfig.cpp:4592 src/libslic3r/PrintConfig.cpp:4603
#: src/libslic3r/PrintConfig.cpp:4616 src/libslic3r/PrintConfig.cpp:4661
#: src/libslic3r/PrintConfig.cpp:4671 src/libslic3r/PrintConfig.cpp:4680
#: src/libslic3r/PrintConfig.cpp:4690 src/libslic3r/PrintConfig.cpp:4706
#: src/libslic3r/PrintConfig.cpp:4730 src/libslic3r/PrintConfig.cpp:4757
#: src/libslic3r/PrintConfig.cpp:4817 src/slic3r/GUI/BedShapeDialog.cpp:75
#: src/slic3r/GUI/ConfigWizard.cpp:362 src/slic3r/GUI/ConfigWizard.cpp:2108
#: src/slic3r/GUI/ConfigWizard.cpp:2144 src/slic3r/GUI/ConfigWizard.cpp:2158
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:105
#: src/slic3r/GUI/GCodeViewer.cpp:490 src/slic3r/GUI/GCodeViewer.cpp:500
#: src/slic3r/GUI/GCodeViewer.cpp:2310 src/slic3r/GUI/GCodeViewer.cpp:2316
#: src/slic3r/GUI/GCodeViewer.cpp:2324 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:259
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:568
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:588
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2374
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1237
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2011
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:149
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:351
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:605
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:606
#: src/slic3r/GUI/LoadStepDialog.cpp:152 src/slic3r/GUI/LoadStepDialog.cpp:206
#: src/slic3r/GUI/ObjectDataViewModel.cpp:158
#: src/slic3r/GUI/WipeTowerDialog.cpp:127
msgid "mm"
msgstr "mm"

#: src/libslic3r/PrintConfig.cpp:385
msgid "G-code thumbnails"
msgstr "G-code 縮圖"

#: src/libslic3r/PrintConfig.cpp:386
msgid ""
"Picture sizes to be stored into a .gcode / .bgcode and .sl1 / .sl1s files, "
"in the following format: \"XxY/EXT, XxY/EXT, ...\"\n"
"Currently supported extensions are PNG, QOI and JPG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:393
msgid "Format of G-code thumbnails"
msgstr "G-code 縮圖的格式"

#: src/libslic3r/PrintConfig.cpp:394
msgid ""
"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
"QOI for low memory firmware"
msgstr "G-code 縮圖的格式：PNG 品質最佳，JPG 檔案最小，QOI 最低記憶體韌體"

#: src/libslic3r/PrintConfig.cpp:400 src/slic3r/GUI/ConfigManipulation.cpp:113
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:33 src/slic3r/GUI/Tab.cpp:1422
msgid "Layer height"
msgstr "打印層高"

#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:576
#: src/libslic3r/PrintConfig.cpp:654 src/libslic3r/PrintConfig.cpp:662
#: src/libslic3r/PrintConfig.cpp:713 src/libslic3r/PrintConfig.cpp:725
#: src/libslic3r/PrintConfig.cpp:1030 src/libslic3r/PrintConfig.cpp:1097
#: src/libslic3r/PrintConfig.cpp:1105 src/libslic3r/PrintConfig.cpp:1114
#: src/libslic3r/PrintConfig.cpp:1625 src/libslic3r/PrintConfig.cpp:1721
#: src/libslic3r/PrintConfig.cpp:1974 src/libslic3r/PrintConfig.cpp:2424
#: src/libslic3r/PrintConfig.cpp:2507 src/libslic3r/PrintConfig.cpp:2793
#: src/libslic3r/PrintConfig.cpp:2813 src/libslic3r/PrintConfig.cpp:2827
#: src/libslic3r/PrintConfig.cpp:2834 src/libslic3r/PrintConfig.cpp:2844
#: src/libslic3r/PrintConfig.cpp:2851 src/libslic3r/PrintConfig.cpp:2860
#: src/libslic3r/PrintConfig.cpp:2869 src/libslic3r/PrintConfig.cpp:3549
#: src/libslic3r/PrintConfig.cpp:3557 src/libslic3r/PrintConfig.cpp:3605
#: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3817
#: src/slic3r/GUI/GUI_Factories.cpp:87 src/slic3r/GUI/GUI_Factories.cpp:160
msgid "Layers and Perimeters"
msgstr "打印層和邊緣"

#: src/libslic3r/PrintConfig.cpp:402
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"此設定控制切片/層的高度（以及總數）。給較薄的層提供更好的準確性，但需要更多的"
"時間來打印。"

#: src/libslic3r/PrintConfig.cpp:409 src/slic3r/GUI/ConfigWizard.cpp:2107
msgid "Max print height"
msgstr "最大打印高度"

#: src/libslic3r/PrintConfig.cpp:410
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr "將此設定為打印時擠出機可以達到的最大高度。"

#: src/libslic3r/PrintConfig.cpp:418
msgid "Hostname, IP or URL"
msgstr "主機名，IP 或 URL"

#: src/libslic3r/PrintConfig.cpp:419
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""
"PrusaSlicer 可以將 G-code 檔案上傳到打印機主機。整個字串應包含打印機主機實際"
"的主機名稱、IP 位址或 URL。啟用基本身份驗證的 HAProxy 背後的打印主機可以經由"
"將使用者名稱和密碼按以下格式輸入 URL 來存取：https://username:password@your-"
"octopi-address/"

#: src/libslic3r/PrintConfig.cpp:428
msgid "API Key / Password"
msgstr "API 金鑰/密碼"

#: src/libslic3r/PrintConfig.cpp:429
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"PrusaSlicer 可以將 G-code 檔案上傳到打印機主機。此字串應包含身份驗證所需的 "
"API 密鑰或密碼。"

#: src/libslic3r/PrintConfig.cpp:436 src/slic3r/GUI/GCodeViewer.cpp:2843
#: src/slic3r/GUI/GUI.cpp:218 src/slic3r/GUI/Sidebar.cpp:407
msgid "Printer"
msgstr "打印機"

#: src/libslic3r/PrintConfig.cpp:437
msgid "Name of the printer"
msgstr "打印機名稱"

#: src/libslic3r/PrintConfig.cpp:444
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:520
msgid "HTTPS CA File"
msgstr "HTTPS CA 檔案"

#: src/libslic3r/PrintConfig.cpp:445
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""
"可以為 HTTPS OctoPrint 連接指定自定義 CA 證書檔案，格式為 crt/pem。如果留白，"
"則使用預設的 OS CA 證書儲存庫。"

#: src/libslic3r/PrintConfig.cpp:454 src/slic3r/GUI/ConfigSnapshotDialog.cpp:31
msgid "User"
msgstr "使用者"

#. TRN Password of WiFi network.
#: src/libslic3r/PrintConfig.cpp:461 src/slic3r/GUI/WifiConfigDialog.cpp:75
msgid "Password"
msgstr "密碼"

#: src/libslic3r/PrintConfig.cpp:470
msgid "Ignore HTTPS certificate revocation checks"
msgstr "忽略 HTTPS 證書吊撤檢查"

#: src/libslic3r/PrintConfig.cpp:471
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""
"如果分送點遺失或離線，則忽略 HTTPS 證書撤銷檢查。若連接失敗，可能需要為自簽認"
"證啟用此選項。"

#: src/libslic3r/PrintConfig.cpp:478
msgid "Printer preset names"
msgstr "打印機預設名稱"

#: src/libslic3r/PrintConfig.cpp:479
msgid "Names of presets related to the physical printer"
msgstr "與實體打印機相關的預設名稱"

#: src/libslic3r/PrintConfig.cpp:484
msgid "Authorization Type"
msgstr "授權類型"

#: src/libslic3r/PrintConfig.cpp:487
msgid "API key"
msgstr "API 金鑰"

#: src/libslic3r/PrintConfig.cpp:488
msgid "HTTP digest"
msgstr "HTTP摘要"

#: src/libslic3r/PrintConfig.cpp:495
msgid "Profile vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:496
msgid "Name of profile vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:502
msgid "Profile version"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:503
msgid "Version of profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:520
msgid "Arc fitting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:521
msgid ""
"Enable to get a G-code file which has G2 and G3 moves. G-code resolution "
"will be used as the fitting tolerance."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:531 src/slic3r/GUI/ConfigManipulation.cpp:80
msgid "Automatic extrusion widths calculation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:532 src/libslic3r/PrintConfig.cpp:1073
#: src/libslic3r/PrintConfig.cpp:1186 src/libslic3r/PrintConfig.cpp:1611
#: src/libslic3r/PrintConfig.cpp:1908 src/libslic3r/PrintConfig.cpp:2483
#: src/libslic3r/PrintConfig.cpp:2987 src/libslic3r/PrintConfig.cpp:3257
#: src/libslic3r/PrintConfig.cpp:3577 src/slic3r/GUI/GUI_Factories.cpp:167
msgid "Extrusion Width"
msgstr "擠出寬度"

#: src/libslic3r/PrintConfig.cpp:533
msgid ""
"Automatically calculates extrusion widths based on the nozzle diameter of "
"the currently used extruder. This setting is essential for printing with "
"different nozzle diameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:539
msgid "Automatic infill combination"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:540 src/libslic3r/PrintConfig.cpp:548
#: src/libslic3r/PrintConfig.cpp:681 src/libslic3r/PrintConfig.cpp:1044
#: src/libslic3r/PrintConfig.cpp:1064 src/libslic3r/PrintConfig.cpp:1519
#: src/libslic3r/PrintConfig.cpp:1532 src/libslic3r/PrintConfig.cpp:1557
#: src/libslic3r/PrintConfig.cpp:1797 src/libslic3r/PrintConfig.cpp:1843
#: src/libslic3r/PrintConfig.cpp:1907 src/libslic3r/PrintConfig.cpp:1946
#: src/libslic3r/PrintConfig.cpp:2958 src/libslic3r/PrintConfig.cpp:2975
#: src/libslic3r/PrintConfig.cpp:3785 src/slic3r/GUI/ConfigManipulation.cpp:257
#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:148
#: src/slic3r/GUI/GUI_Factories.cpp:88 src/slic3r/GUI/GUI_Factories.cpp:161
#: src/slic3r/GUI/Tab.cpp:1494 src/slic3r/GUI/Tab.cpp:1496
msgid "Infill"
msgstr "填充"

#: src/libslic3r/PrintConfig.cpp:541
msgid ""
"This feature automatically combines infill of several layers and speeds up "
"your print by extruding thicker infill layers while preserving thin "
"perimeters, thus maintaining accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:547
msgid "Automatic infill combination - Max layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:549
msgid ""
"Maximum layer height for combining infill when automatic infill combining is "
"enabled. Maximum layer height could be specified either as an absolute in "
"millimeters value or as a percentage of nozzle diameter. For printing with "
"different nozzle diameters, it is recommended to use percentage value over "
"absolute value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:558
msgid "Avoid crossing curled overhangs (Experimental)"
msgstr ""

#. TRN PrintSettings: "Avoid crossing curled overhangs (Experimental)"
#: src/libslic3r/PrintConfig.cpp:560
msgid ""
"Plan travel moves such that the extruder avoids areas where the filament may "
"be curled up. This is mostly happening on steeper rounded overhangs and may "
"cause a crash with the nozzle. This feature slows down both the print and "
"the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:567
msgid "Avoid crossing perimeters"
msgstr "避免跨越邊緣"

#: src/libslic3r/PrintConfig.cpp:568
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"最佳化沒有列印時的移動以盡量減少邊緣交叉。這對於發生滲漏的 Bowden 擠出機非常"
"有用。此功能會減慢打印和 G-code 的產生速度。"

#: src/libslic3r/PrintConfig.cpp:575
msgid "Avoid crossing perimeters - Max detour length"
msgstr "避免越過邊緣 - 最遠的繞過長度"

#: src/libslic3r/PrintConfig.cpp:577
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""
"避免穿越邊緣的最遠繞過長度。如果繞過的距離超過此值，則避免穿越邊緣功能不適用"
"於此路徑。繞行長度可以指定為絕對值或沒有列印時的移動之百分比（例如 50%）。"

#: src/libslic3r/PrintConfig.cpp:580
msgid "mm or % (zero to disable)"
msgstr "mm或百分比(0為禁用)"

#: src/libslic3r/PrintConfig.cpp:587 src/libslic3r/PrintConfig.cpp:3538
msgid "Other layers"
msgstr "其他的層"

#: src/libslic3r/PrintConfig.cpp:588
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr "第一層之後各層的載台溫度。將此設定為零以停用輸出中的載台溫度控制指令。"

#: src/libslic3r/PrintConfig.cpp:590 src/libslic3r/PrintConfig.cpp:602
#: src/libslic3r/PrintConfig.cpp:615 src/libslic3r/PrintConfig.cpp:1604
#: src/libslic3r/PrintConfig.cpp:1671 src/libslic3r/PrintConfig.cpp:3541
#: src/libslic3r/PrintConfig.cpp:4378 src/slic3r/GUI/ConfigWizard.cpp:2233
#: src/slic3r/GUI/ConfigWizard.cpp:2247 src/slic3r/GUI/GCodeViewer.cpp:545
msgid "°C"
msgstr "°C"

#: src/libslic3r/PrintConfig.cpp:591
msgid "Bed temperature"
msgstr "載台溫度"

#. TRN: Label of a configuration parameter: Nominal chamber temperature.
#: src/libslic3r/PrintConfig.cpp:598
msgid "Nominal"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:599
msgid "Chamber temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:600
msgid ""
"Required chamber temperature for the print.\n"
"When set to zero, the nominal chamber temperature is not set in the G-code."
msgstr ""

#. TRN: Label of a configuration parameter: Minimal chamber temperature
#: src/libslic3r/PrintConfig.cpp:610
msgid "Minimal"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:611
msgid "Chamber minimal temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:612
msgid ""
"Minimal chamber temperature that the printer waits for before the print "
"starts. This allows to start the print before the nominal chamber "
"temperature is reached.\n"
"When set to zero, the minimal chamber temperature is not set in the G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:622
msgid "Bed temperature by extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:623 src/libslic3r/PrintConfig.cpp:1122
#: src/libslic3r/PrintConfig.cpp:1900 src/libslic3r/PrintConfig.cpp:2474
#: src/libslic3r/PrintConfig.cpp:2967 src/libslic3r/PrintConfig.cpp:3248
#: src/libslic3r/PrintConfig.cpp:3276 src/libslic3r/PrintConfig.cpp:3776
#: src/slic3r/GUI/GUI_Factories.cpp:166 src/slic3r/GUI/Tab.cpp:1637
#: src/slic3r/GUI/Tab.cpp:2668
msgid "Extruders"
msgstr "擠出機"

#: src/libslic3r/PrintConfig.cpp:624
msgid ""
"The extruder which determines bed temperatures. Set to 0 to determine "
"temperatures based on the first printing extruder of the first and the "
"second layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:633
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"此自定義代碼將在每次打印層在 Z 軸移動前插入。請注意，您可以為所有 "
"PrusaSlicer 設定以及 [layer_num] 和 [layer_z] 使用佔位符號變數。"

#: src/libslic3r/PrintConfig.cpp:643
msgid "Between objects G-code"
msgstr "模型之間的 G-code"

#: src/libslic3r/PrintConfig.cpp:644
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"使用順序打印時，將此代碼插入模型之間。預設情況下使用非等待命令重置擠出機和載"
"台溫度；但若在此自定義代碼中檢測到 M104、M109、M140 或 M190，PrusaSlicer 將不"
"會添加溫度命令。請注意，您可以為所有 PrusaSlicer 設定使用佔位符號變數，因此您"
"可以在任何需要的地方放置“M109 S[first_layer_temperature]”命令。"

#. TRN Print Settings: "Bottom solid layers"
#: src/libslic3r/PrintConfig.cpp:653 src/libslic3r/PrintConfig.cpp:661
msgctxt "Layers"
msgid "Bottom"
msgstr "底部"

#: src/libslic3r/PrintConfig.cpp:655
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "在底面上生成的實體層數。"

#: src/libslic3r/PrintConfig.cpp:656
msgid "Bottom solid layers"
msgstr "底部實體層"

#: src/libslic3r/PrintConfig.cpp:663
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""
"如有必要，底部實體層的數量會增加到 bottom_solid_layers 以上，以滿足底殼的最小"
"厚度。"

#: src/libslic3r/PrintConfig.cpp:665
msgid "Minimum bottom shell thickness"
msgstr "最小底殼厚度"

#: src/libslic3r/PrintConfig.cpp:671
msgid "Bridge"
msgstr "橋接"

#: src/libslic3r/PrintConfig.cpp:672
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr "這是您的打印機將用於橋接的加速度。設定為零以禁用橋接的加速度控制。"

#: src/libslic3r/PrintConfig.cpp:674 src/libslic3r/PrintConfig.cpp:961
#: src/libslic3r/PrintConfig.cpp:1585 src/libslic3r/PrintConfig.cpp:1594
#: src/libslic3r/PrintConfig.cpp:1800 src/libslic3r/PrintConfig.cpp:1809
#: src/libslic3r/PrintConfig.cpp:1818 src/libslic3r/PrintConfig.cpp:1827
#: src/libslic3r/PrintConfig.cpp:1836 src/libslic3r/PrintConfig.cpp:2188
#: src/libslic3r/PrintConfig.cpp:2237 src/libslic3r/PrintConfig.cpp:2249
#: src/libslic3r/PrintConfig.cpp:2259 src/libslic3r/PrintConfig.cpp:2460
#: src/libslic3r/PrintConfig.cpp:2468
msgid "mm/s²"
msgstr "mm/s²"

#: src/libslic3r/PrintConfig.cpp:680
msgid "Bridging angle"
msgstr "橋接角度"

#: src/libslic3r/PrintConfig.cpp:682
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"橋接角度覆寫。如果保留為零，將自動計算橋接角度。否則所提供的角度將用於所有橋"
"接。 180° 也可以表示為零角度。"

#: src/libslic3r/PrintConfig.cpp:685 src/libslic3r/PrintConfig.cpp:1523
#: src/libslic3r/PrintConfig.cpp:2024 src/libslic3r/PrintConfig.cpp:2682
#: src/libslic3r/PrintConfig.cpp:2878 src/libslic3r/PrintConfig.cpp:2888
#: src/libslic3r/PrintConfig.cpp:3188 src/libslic3r/PrintConfig.cpp:3422
#: src/libslic3r/PrintConfig.cpp:3442 src/libslic3r/PrintConfig.cpp:3454
#: src/libslic3r/PrintConfig.cpp:3491 src/libslic3r/PrintConfig.cpp:3726
#: src/libslic3r/PrintConfig.cpp:3862 src/libslic3r/PrintConfig.cpp:4144
#: src/libslic3r/PrintConfig.cpp:4636 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:287
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2572
#: src/slic3r/GUI/LoadStepDialog.cpp:231
msgid "°"
msgstr "°"

#: src/libslic3r/PrintConfig.cpp:691
msgid "Bridges fan speed"
msgstr "打印橋接時風扇的速度"

#: src/libslic3r/PrintConfig.cpp:692
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "在所有橋接和懸空狀態下強制執行此風扇速度。"

#: src/libslic3r/PrintConfig.cpp:693 src/libslic3r/PrintConfig.cpp:815
#: src/libslic3r/PrintConfig.cpp:824 src/libslic3r/PrintConfig.cpp:833
#: src/libslic3r/PrintConfig.cpp:842 src/libslic3r/PrintConfig.cpp:1360
#: src/libslic3r/PrintConfig.cpp:1500 src/libslic3r/PrintConfig.cpp:1511
#: src/libslic3r/PrintConfig.cpp:1534 src/libslic3r/PrintConfig.cpp:2071
#: src/libslic3r/PrintConfig.cpp:2267 src/libslic3r/PrintConfig.cpp:2330
#: src/libslic3r/PrintConfig.cpp:2592 src/libslic3r/PrintConfig.cpp:2651
#: src/libslic3r/PrintConfig.cpp:2836 src/libslic3r/PrintConfig.cpp:3531
#: src/libslic3r/PrintConfig.cpp:3735 src/libslic3r/PrintConfig.cpp:3745
#: src/libslic3r/PrintConfig.cpp:4047 src/libslic3r/PrintConfig.cpp:4275
#: src/libslic3r/PrintConfig.cpp:4563 src/slic3r/GUI/GCodeViewer.cpp:535
msgid "%"
msgstr "%"

#: src/libslic3r/PrintConfig.cpp:700
msgid "Bridge flow ratio"
msgstr "橋接流量比"

#: src/libslic3r/PrintConfig.cpp:702
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"該因素會影響用於橋接的塑料流量。您可以稍微降低它以拉出擠出物並防止下垂，儘管"
"預設設定通常很好，您應該在調整這個之前先嘗試使用冷卻（使用風扇）的方式。"

#: src/libslic3r/PrintConfig.cpp:712
msgid "Single perimeter on top surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:714
msgid ""
"Use only one perimeter on flat top surface, to give more space to the top "
"infill pattern. Could be applied on topmost surface or all top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:717 src/libslic3r/PrintConfig.cpp:1034
#: src/libslic3r/PrintConfig.cpp:1775 src/libslic3r/PrintConfig.cpp:2917
msgid "Disabled"
msgstr "停用"

#: src/libslic3r/PrintConfig.cpp:718 src/libslic3r/PrintConfig.cpp:2060
msgid "All top surfaces"
msgstr "所有頂面"

#: src/libslic3r/PrintConfig.cpp:719 src/libslic3r/PrintConfig.cpp:2061
msgid "Topmost surface only"
msgstr "僅最頂層表面"

#: src/libslic3r/PrintConfig.cpp:724
msgid "Only one perimeter on first layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:726
msgid "Use only one perimeter on the first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:731
msgid "Bridges"
msgstr "橋接器"

#: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:743
#: src/libslic3r/PrintConfig.cpp:753 src/libslic3r/PrintConfig.cpp:767
#: src/libslic3r/PrintConfig.cpp:776 src/libslic3r/PrintConfig.cpp:785
#: src/libslic3r/PrintConfig.cpp:794 src/libslic3r/PrintConfig.cpp:1085
#: src/libslic3r/PrintConfig.cpp:1728 src/libslic3r/PrintConfig.cpp:1947
#: src/libslic3r/PrintConfig.cpp:2088 src/libslic3r/PrintConfig.cpp:2497
#: src/libslic3r/PrintConfig.cpp:2946 src/libslic3r/PrintConfig.cpp:2999
#: src/libslic3r/PrintConfig.cpp:3590 src/slic3r/GUI/GCodeViewer.cpp:515
#: src/slic3r/GUI/GUI_Factories.cpp:165 src/slic3r/GUI/Tab.cpp:1584
msgid "Speed"
msgstr "速度"

#: src/libslic3r/PrintConfig.cpp:733
msgid "Speed for printing bridges."
msgstr "打印橋接的速度。"

#: src/libslic3r/PrintConfig.cpp:734 src/libslic3r/PrintConfig.cpp:1244
#: src/libslic3r/PrintConfig.cpp:1254 src/libslic3r/PrintConfig.cpp:1262
#: src/libslic3r/PrintConfig.cpp:1270 src/libslic3r/PrintConfig.cpp:1279
#: src/libslic3r/PrintConfig.cpp:1287 src/libslic3r/PrintConfig.cpp:1305
#: src/libslic3r/PrintConfig.cpp:1331 src/libslic3r/PrintConfig.cpp:1350
#: src/libslic3r/PrintConfig.cpp:1731 src/libslic3r/PrintConfig.cpp:1949
#: src/libslic3r/PrintConfig.cpp:2090 src/libslic3r/PrintConfig.cpp:2171
#: src/libslic3r/PrintConfig.cpp:2205 src/libslic3r/PrintConfig.cpp:2217
#: src/libslic3r/PrintConfig.cpp:2227 src/libslic3r/PrintConfig.cpp:2289
#: src/libslic3r/PrintConfig.cpp:2348 src/libslic3r/PrintConfig.cpp:2499
#: src/libslic3r/PrintConfig.cpp:2767 src/libslic3r/PrintConfig.cpp:2776
#: src/libslic3r/PrintConfig.cpp:3385 src/libslic3r/PrintConfig.cpp:3625
#: src/libslic3r/PrintConfig.cpp:3635 src/libslic3r/PrintConfig.cpp:4827
#: src/slic3r/GUI/GCodeViewer.cpp:515
msgid "mm/s"
msgstr "mm/s"

#. TRN: Label for speed used to print infill above bridges.
#: src/libslic3r/PrintConfig.cpp:742
msgid "Over bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:744
msgid ""
"Speed for printing solid infill above bridges. Set to 0 to use solid infill "
"speed. If set as percentage, the speed is calculated over solid infill "
"speed. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:746 src/libslic3r/PrintConfig.cpp:769
#: src/libslic3r/PrintConfig.cpp:778 src/libslic3r/PrintConfig.cpp:787
#: src/libslic3r/PrintConfig.cpp:796 src/libslic3r/PrintConfig.cpp:1089
#: src/libslic3r/PrintConfig.cpp:1638 src/libslic3r/PrintConfig.cpp:1651
#: src/libslic3r/PrintConfig.cpp:1661 src/libslic3r/PrintConfig.cpp:2950
#: src/libslic3r/PrintConfig.cpp:3003 src/libslic3r/PrintConfig.cpp:3340
#: src/libslic3r/PrintConfig.cpp:3596
msgid "mm/s or %"
msgstr "mm/s 或 %"

#: src/libslic3r/PrintConfig.cpp:752
msgid "Enable dynamic overhang speeds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:754
msgid "This setting enables dynamic speed control on overhangs."
msgstr ""

#. TRN PrintSettings : "Dynamic overhang speed"
#: src/libslic3r/PrintConfig.cpp:759
msgid ""
"Overhang size is expressed as a percentage of overlap of the extrusion with "
"the previous layer: 100% would be full overlap (no overhang), while 0% "
"represents full overhang (floating extrusion, bridge). Speeds for overhang "
"sizes in between are calculated via linear interpolation. If set as "
"percentage, the speed is calculated over the external perimeter speed. Note "
"that the speeds generated to gcode will never exceed the max volumetric "
"speed value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:766 src/libslic3r/PrintConfig.cpp:813
msgid "speed for 0% overlap (bridge)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:775 src/libslic3r/PrintConfig.cpp:822
msgid "speed for 25% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:784 src/libslic3r/PrintConfig.cpp:831
msgid "speed for 50% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:793 src/libslic3r/PrintConfig.cpp:840
msgid "speed for 75% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:802
msgid "Enable dynamic fan speeds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:803
msgid "This setting enables dynamic fan speed control on overhangs."
msgstr ""

#. TRN FilamentSettings : "Dynamic fan speeds"
#: src/libslic3r/PrintConfig.cpp:808
msgid ""
"Overhang size is expressed as a percentage of overlap of the extrusion with "
"the previous layer: 100% would be full overlap (no overhang), while 0% "
"represents full overhang (floating extrusion, bridge). Fan speeds for "
"overhang sizes in between are calculated via linear interpolation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:849
msgid "Brim width"
msgstr "帽邊寬度"

#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:861
#: src/libslic3r/PrintConfig.cpp:874 src/slic3r/GUI/GUI_Factories.cpp:169
#: src/slic3r/GUI/Tab.cpp:1525
msgid "Skirt and brim"
msgstr "側裙和帽邊"

#: src/libslic3r/PrintConfig.cpp:851
msgid ""
"The horizontal width of the brim that will be printed around each object on "
"the first layer. When raft is used, no brim is generated (use "
"raft_first_layer_expansion)."
msgstr ""
"在第一層上的每個模型周圍打印的邊緣之水平寬度。使用棧板時，不會生成帽邊（使用 "
"raft_first_layer_expansion）。"

#: src/libslic3r/PrintConfig.cpp:860
msgid "Brim type"
msgstr "帽邊類型"

#: src/libslic3r/PrintConfig.cpp:862
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr "將要在每個模型的第一層周圍打印帽邊的位置。"

#: src/libslic3r/PrintConfig.cpp:864
msgid "No brim"
msgstr "沒有帽邊"

#: src/libslic3r/PrintConfig.cpp:865
msgid "Outer brim only"
msgstr "僅限外側帽邊"

#: src/libslic3r/PrintConfig.cpp:866
msgid "Inner brim only"
msgstr "僅限內側帽邊"

#: src/libslic3r/PrintConfig.cpp:867
msgid "Outer and inner brim"
msgstr "外側與內側帽邊"

#: src/libslic3r/PrintConfig.cpp:873
msgid "Brim separation gap"
msgstr "帽邊分隔間隙"

#: src/libslic3r/PrintConfig.cpp:875
msgid ""
"Offset of brim from the printed object. The offset is applied after the "
"elephant foot compensation."
msgstr "打印模型的帽邊偏移量。在象腳補償之後使用偏移量。"

#: src/libslic3r/PrintConfig.cpp:882
msgid "Colorprint height"
msgstr "彩色打印高度"

#: src/libslic3r/PrintConfig.cpp:883
msgid "Heights at which a filament change is to occur."
msgstr "產生線材變化的高度。"

#: src/libslic3r/PrintConfig.cpp:887 src/slic3r/GUI/Tab.cpp:100
msgid "Compatible printers"
msgstr "相容打印機"

#: src/libslic3r/PrintConfig.cpp:893
msgid "Compatible printers condition"
msgstr "相容打印機的條件"

#: src/libslic3r/PrintConfig.cpp:894
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"使用當前打印機設定檔設定值的布林表示式。如果此表示式的計算結果為真，則認為此"
"設定檔與檔前打印機設定檔相容。"

#: src/libslic3r/PrintConfig.cpp:902 src/slic3r/GUI/Tab.cpp:106
msgid "Compatible print profiles"
msgstr "相容的打印設定檔"

#: src/libslic3r/PrintConfig.cpp:908
msgid "Compatible print profiles condition"
msgstr "相容的打印機設定檔條件"

#: src/libslic3r/PrintConfig.cpp:909
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"使用當前打印設定檔設定值的布林表示式。如果此表示式的計算結果為真，則認為此設"
"定檔與當前打印設定檔案相容。"

#: src/libslic3r/PrintConfig.cpp:926
msgid "Complete individual objects"
msgstr "完成單個模型"

#: src/libslic3r/PrintConfig.cpp:927
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"當打印多個模型或副本時，此功能將完成每個模型，然後再移動到下一個模型（並從底"
"層開始）。此功能有助於避免損壞打印件的風險。 PrusaSlicer 應會警告並防止您發生"
"擠出機碰撞，但還是要小心。"

#: src/libslic3r/PrintConfig.cpp:935
msgid "Enable auto cooling"
msgstr "啟用自動冷卻"

#: src/libslic3r/PrintConfig.cpp:936
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr "這個表示啟用邏輯自動冷卻，根據每一層的打印時間調整打印速度和風扇速度。"

#: src/libslic3r/PrintConfig.cpp:941
msgid "Cooling tube position"
msgstr "冷卻管位置"

#: src/libslic3r/PrintConfig.cpp:942
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr "冷卻管中心點與擠出機尖端的距離。"

#: src/libslic3r/PrintConfig.cpp:949
msgid "Cooling tube length"
msgstr "冷卻管長度"

#: src/libslic3r/PrintConfig.cpp:950
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr "冷卻管的長度以限制其在內部的冷卻移動空間。"

#: src/libslic3r/PrintConfig.cpp:957 src/libslic3r/PrintConfig.cpp:3365
#: src/libslic3r/PrintConfig.cpp:4542 src/slic3r/GUI/GUI_Factories.cpp:958
#: src/slic3r/GUI/Tab.cpp:5810 src/slic3r/GUI/Tab.cpp:5952
#: src/slic3r/Utils/Repetier.cpp:149 src/slic3r/Utils/Repetier.cpp:230
msgid "Default"
msgstr "預設值"

#: src/libslic3r/PrintConfig.cpp:958
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"這是在使用特定於目的的加速度值（周邊/填充）後，打印機將重置為加速度。設定為零"
"以完全防止重置加速度。"

#: src/libslic3r/PrintConfig.cpp:967
msgid "Default filament profile"
msgstr "預設線材設定檔"

#: src/libslic3r/PrintConfig.cpp:968
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"與當前打印機設定檔關聯的預設線材設定檔。選擇當前打印機設定檔後，將啟用該線材"
"設定檔。"

#: src/libslic3r/PrintConfig.cpp:974
msgid "Default print profile"
msgstr "預設打印設定檔"

#: src/libslic3r/PrintConfig.cpp:975 src/libslic3r/PrintConfig.cpp:4510
#: src/libslic3r/PrintConfig.cpp:4521
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"與當前打印機設定檔關聯的預設打印設定檔。選擇當前打印機設定檔後，將啟用此打印"
"設定檔。"

#: src/libslic3r/PrintConfig.cpp:981
msgid "Disable fan for the first"
msgstr "在開始打印後的層數內禁用風扇"

#: src/libslic3r/PrintConfig.cpp:982
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"您可以將此設定為正數以在開始打印第一層至某個層之間禁用風扇，以使最開始的打印"
"能更好的附著在載台上或避免變形。"

#: src/libslic3r/PrintConfig.cpp:984 src/libslic3r/PrintConfig.cpp:1846
#: src/libslic3r/PrintConfig.cpp:2612 src/libslic3r/PrintConfig.cpp:2906
#: src/libslic3r/PrintConfig.cpp:2980 src/libslic3r/PrintConfig.cpp:3240
#: src/libslic3r/PrintConfig.cpp:3287 src/libslic3r/PrintConfig.cpp:3303
#: src/libslic3r/PrintConfig.cpp:3790
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:65
msgid "layers"
msgstr "層"

#: src/libslic3r/PrintConfig.cpp:991
msgid "Don't support bridges"
msgstr "不支援橋接"

#: src/libslic3r/PrintConfig.cpp:993
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr "防止在橋接區域下生成支撐材料的實驗選項。"

#: src/libslic3r/PrintConfig.cpp:999
msgid "Distance between copies"
msgstr "副本之間的距離"

#: src/libslic3r/PrintConfig.cpp:1000
msgid "Distance used for the auto-arrange feature of the plater."
msgstr "用於載台中排列模型自動設定距離的功能。"

#: src/libslic3r/PrintConfig.cpp:1008
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""
"這個結束過程將會插入到輸出檔案的末端。請注意，您可以為所有 PrusaSlicer 設定使"
"用佔位符號變數。"

#: src/libslic3r/PrintConfig.cpp:1018
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""
"這個結束過程會被插入到輸出檔案的末端，在打印機結束 gcode 之前（在多材料打印機"
"的情況下，在從這個線材改變到任何工具之前）。請注意，您可以為所有 PrusaSlicer "
"設定使用佔位符號變數。如果您有多個擠出機，則 gcode 將會按照擠出機順序處理。"

#: src/libslic3r/PrintConfig.cpp:1029
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1031
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#. TRN: This is a drop-down option for 'Ensure vertical shell thickness' parameter.
#: src/libslic3r/PrintConfig.cpp:1036
msgid "Partial"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1037 src/libslic3r/PrintConfig.cpp:2919
msgid "Enabled"
msgstr "啟用"

#: src/libslic3r/PrintConfig.cpp:1043
msgid "Top fill pattern"
msgstr "頂部填充花紋"

#: src/libslic3r/PrintConfig.cpp:1045
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr "頂部打印的填充花紋樣式。這只會影響頂部可見層，而不影響其相鄰的實體殼。"

#: src/libslic3r/PrintConfig.cpp:1048 src/libslic3r/PrintConfig.cpp:1560
#: src/libslic3r/PrintConfig.cpp:3351 src/libslic3r/PrintConfig.cpp:3366
msgid "Rectilinear"
msgstr "直線型"

#: src/libslic3r/PrintConfig.cpp:1049
msgid "Monotonic"
msgstr "單調"

#: src/libslic3r/PrintConfig.cpp:1050
msgid "Monotonic Lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1051 src/libslic3r/PrintConfig.cpp:1561
msgid "Aligned Rectilinear"
msgstr "對齊直線"

#: src/libslic3r/PrintConfig.cpp:1052 src/libslic3r/PrintConfig.cpp:1567
#: src/libslic3r/PrintConfig.cpp:3367
msgid "Concentric"
msgstr "同心"

#: src/libslic3r/PrintConfig.cpp:1053 src/libslic3r/PrintConfig.cpp:1571
msgid "Hilbert Curve"
msgstr "希爾伯特曲線"

#: src/libslic3r/PrintConfig.cpp:1054 src/libslic3r/PrintConfig.cpp:1572
msgid "Archimedean Chords"
msgstr "阿基米德和弦"

#: src/libslic3r/PrintConfig.cpp:1055 src/libslic3r/PrintConfig.cpp:1573
msgid "Octagram Spiral"
msgstr "八角螺旋"

#: src/libslic3r/PrintConfig.cpp:1063
msgid "Bottom fill pattern"
msgstr "底部填充花紋"

#: src/libslic3r/PrintConfig.cpp:1065
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""
"底部打印的的填充花紋。這只會影響底部外部可見層，而不影響其相鄰的實體殼。"

#: src/libslic3r/PrintConfig.cpp:1072 src/libslic3r/PrintConfig.cpp:1084
#: src/libslic3r/PrintConfig.cpp:2465
msgid "External perimeters"
msgstr "外部邊緣"

#: src/libslic3r/PrintConfig.cpp:1074
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"將此設定為非零值以設定外部邊緣的手動擠壓寬度。如果保留為零，將會使用預設擠出"
"寬度（若已設定的話），否則將使用 1.125 x 噴嘴直徑。如果以百分比表示（例如 "
"200%），它將會取層高的百分比為計算方式。"

#: src/libslic3r/PrintConfig.cpp:1077 src/libslic3r/PrintConfig.cpp:1191
#: src/libslic3r/PrintConfig.cpp:1616 src/libslic3r/PrintConfig.cpp:1861
#: src/libslic3r/PrintConfig.cpp:1913 src/libslic3r/PrintConfig.cpp:1940
#: src/libslic3r/PrintConfig.cpp:2488 src/libslic3r/PrintConfig.cpp:2787
#: src/libslic3r/PrintConfig.cpp:2991 src/libslic3r/PrintConfig.cpp:3176
#: src/libslic3r/PrintConfig.cpp:3261 src/libslic3r/PrintConfig.cpp:3582
#: src/libslic3r/PrintConfig.cpp:3835 src/libslic3r/PrintConfig.cpp:3850
#: src/libslic3r/PrintConfig.cpp:3884 src/libslic3r/PrintConfig.cpp:3896
msgid "mm or %"
msgstr "mm 或 %"

#: src/libslic3r/PrintConfig.cpp:1086
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"此項設定將影響外部邊緣（可見邊緣）的速度。如果以百分比表示（例如：80%），它將"
"根據上面的邊緣速度設定進行計算。設定為零表示自動。"

#: src/libslic3r/PrintConfig.cpp:1096
msgid "External perimeters first"
msgstr "外部邊緣優先"

#: src/libslic3r/PrintConfig.cpp:1098
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr "從最外層到最內層打印邊緣，而不是預設的由內到外打印。"

#: src/libslic3r/PrintConfig.cpp:1104
msgid "Extra perimeters if needed"
msgstr "如果需要額外的邊緣"

#: src/libslic3r/PrintConfig.cpp:1106
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"在需要時添加更多外圍輪廓, 以避免傾斜牆中的縫隙。Slic3r不斷添加輪廓，直到支持"
"上面70％ 以上的循環。"

#: src/libslic3r/PrintConfig.cpp:1113
msgid "Extra perimeters on overhangs (Experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1115
msgid ""
"Detect overhang areas where bridges cannot be anchored, and fill them with "
"extra perimeter paths. These paths are anchored to the nearby non-overhang "
"area when possible."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1121 src/slic3r/GUI/GCodeViewer.cpp:2553
#: src/slic3r/GUI/GCodeViewer.cpp:2598 src/slic3r/GUI/GCodeViewer.cpp:2603
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:71
#: src/slic3r/GUI/GUI_ObjectList.cpp:370 src/slic3r/GUI/Tab.cpp:2139
#: src/slic3r/GUI/wxExtensions.cpp:381
msgid "Extruder"
msgstr "擠出機"

#: src/libslic3r/PrintConfig.cpp:1123
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"要使用的擠出機（除非指定了更明確的擠出機設定）。這設定值將覆寫用在邊緣和填充"
"的擠出機，但不會覆寫用在支撐的擠出機。"

#: src/libslic3r/PrintConfig.cpp:1127 src/slic3r/GUI/ExtraRenderers.cpp:339
#: src/slic3r/GUI/GUI_ObjectList.cpp:603 src/slic3r/GUI/GUI_ObjectList.cpp:615
#: src/slic3r/GUI/GUI_ObjectList.cpp:1091
#: src/slic3r/GUI/GUI_ObjectList.cpp:2098
#: src/slic3r/GUI/GUI_ObjectList.cpp:2985
#: src/slic3r/GUI/GUI_ObjectList.cpp:4846
#: src/slic3r/GUI/ObjectDataViewModel.cpp:267
msgid "default"
msgstr "預設"

#. TRN - Input label. Be short as possible
#. Height of one text line - Font Ascent
#: src/libslic3r/PrintConfig.cpp:1130 src/slic3r/GUI/GCodeViewer.cpp:500
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3909
msgid "Height"
msgstr "高度"

#: src/libslic3r/PrintConfig.cpp:1131
msgid ""
"Only used when 'Print Settings -> Complete individual objects' is active. "
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. Used to check for collisions with previously printed "
"objects and to prevent them when arranging.\n"
"The value is ignored for most Prusa printers, which come with more detailed "
"extruder model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1141 src/slic3r/GUI/GLCanvas3D.cpp:363
msgid "Radius"
msgstr "圓角"

#: src/libslic3r/PrintConfig.cpp:1142
msgid ""
"Only used when 'Print Settings -> Complete individual objects' is active. "
"Set this to a radius of a nozzle-centered cylinder big enough to enclose the "
"extruder assembly. Used to check for collisions with previously printed "
"objects and to prevent them when arranging.\n"
"The value is ignored for most Prusa printers, which come with more detailed "
"extruder model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1152
msgid "Extruder Color"
msgstr "擠出機顏色"

#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1216
#: src/libslic3r/PrintConfig.cpp:4355
msgid "This is only used in the Slic3r interface as a visual help."
msgstr "這只是在 PrusaSlicer 介面中作為視覺輔助。"

#: src/libslic3r/PrintConfig.cpp:1159
msgid "Extruder offset"
msgstr "擠出機偏移"

#: src/libslic3r/PrintConfig.cpp:1160
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"如果您的韌體無法處理擠出機的位移，您可能需要考慮將它寫進 G-code 中。此選項允"
"許您指定每個擠出機相對於第一個擠出機的位移。它需要正座標（它們將從 XY 坐標中"
"減去）。"

#: src/libslic3r/PrintConfig.cpp:1169
msgid "Extrusion axis"
msgstr "擠出軸"

#: src/libslic3r/PrintConfig.cpp:1170
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"使用此選項設定與打印機擠出機關聯的軸之字母（通常為 E，但有些打印機使用 A）。"

#: src/libslic3r/PrintConfig.cpp:1175
msgid "Extrusion multiplier"
msgstr "擠出流量倍增"

#: src/libslic3r/PrintConfig.cpp:1176
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"這個功能是按比例改變擠出流量。您可能需要調整此設定以獲得漂亮又光滑的表面與正"
"確的單壁寬度。一般的值介於 0.9 和 1.1 之間。如果您認為需要對此進行更多更改，"
"請檢查線材直徑和韌體 E 軸步進長度。"

#: src/libslic3r/PrintConfig.cpp:1185
msgid "Default extrusion width"
msgstr "預設擠出寬度"

#: src/libslic3r/PrintConfig.cpp:1187
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"將此設定為非零值以允許手動擠出寬度。如果保留為零，PrusaSlicer 將由噴嘴直徑匯"
"出擠出寬度（請參閱邊緣擠出寬度、填充擠出寬度等的工具提示）。如果以百分比表示"
"（例如：230%），它將以層高的百分比為計算方式。"

#: src/libslic3r/PrintConfig.cpp:1199
msgid "Keep fan always on"
msgstr "風扇將永遠以 %1%%% 運作"

#: src/libslic3r/PrintConfig.cpp:1200
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"如果啟用，風扇將永遠不會被停用，並且至少會以最低速度保持運行。這對於 PLA 很有"
"用，但是對 ABS 則是有害。"

#: src/libslic3r/PrintConfig.cpp:1205
msgid "Enable fan if layer print time is below"
msgstr "如果單層打印時間低於啟用風扇的話"

#: src/libslic3r/PrintConfig.cpp:1206
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"如果層打印時間的估計低於此秒數時風扇將會被啟用，其速度則會經由最小和最大速度"
"的插值計算。"

#: src/libslic3r/PrintConfig.cpp:1208 src/libslic3r/PrintConfig.cpp:2938
msgid "approximate seconds"
msgstr "大約秒"

#: src/libslic3r/PrintConfig.cpp:1215 src/libslic3r/PrintConfig.cpp:4354
msgid "Color"
msgstr "線材顏色"

#: src/libslic3r/PrintConfig.cpp:1221
msgid "Filament notes"
msgstr "線材註釋"

#: src/libslic3r/PrintConfig.cpp:1222
msgid "You can put your notes regarding the filament here."
msgstr "您可以將有關線材的註釋放在這裡。"

#: src/libslic3r/PrintConfig.cpp:1230 src/libslic3r/PrintConfig.cpp:2295
msgid "Max volumetric speed"
msgstr "最大容積速度"

#: src/libslic3r/PrintConfig.cpp:1231
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"該線材允許的最大體積速度。將打印的最大體積速度限制為打印和線材體積速度的最小"
"值。設定為零表示沒有限制。"

#: src/libslic3r/PrintConfig.cpp:1234 src/libslic3r/PrintConfig.cpp:1407
#: src/libslic3r/PrintConfig.cpp:2298 src/slic3r/GUI/GCodeViewer.cpp:525
#: src/slic3r/GUI/RammingChart.cpp:99
msgid "mm³/s"
msgstr "mm³/s"

#: src/libslic3r/PrintConfig.cpp:1240
msgid "Max non-crossing infill speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1241
msgid ""
"Maximum speed allowed for this filament while printing infill without any "
"self intersections in a single layer. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1250
msgid "Max crossing infill speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1251
msgid ""
"Maximum speed allowed for this filament while printing infill with self "
"intersections in a single layer. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1260
msgid "Loading speed"
msgstr "上料速度"

#: src/libslic3r/PrintConfig.cpp:1261
msgid "Speed used for loading the filament on the wipe tower."
msgstr "用於將線材上載到擦拭塔上的速度。"

#: src/libslic3r/PrintConfig.cpp:1268
msgid "Loading speed at the start"
msgstr "啟動上料速度"

#: src/libslic3r/PrintConfig.cpp:1269
msgid "Speed used at the very beginning of loading phase."
msgstr "上料階段開始時使用的速度。"

#: src/libslic3r/PrintConfig.cpp:1276
msgid "Unloading speed"
msgstr "卸料速度"

#: src/libslic3r/PrintConfig.cpp:1277
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""
"用於在擦拭塔上卸載線材的速度（這個不會影響剛衝壓擠出後卸載的最初部分）。"

#: src/libslic3r/PrintConfig.cpp:1285
msgid "Unloading speed at the start"
msgstr "起步卸料速度"

#: src/libslic3r/PrintConfig.cpp:1286
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr "用於在衝壓擠出後立即卸載線材尖端的速度。"

#: src/libslic3r/PrintConfig.cpp:1293
msgid "Delay after unloading"
msgstr "卸料後延遲"

#: src/libslic3r/PrintConfig.cpp:1294
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""
"線材卸料後的等待時間。可能有助於在需要更多時間收縮到原始尺寸的柔性材料上以獲"
"得可靠的工具替換。"

#: src/libslic3r/PrintConfig.cpp:1297 src/libslic3r/PrintConfig.cpp:1368
#: src/libslic3r/PrintConfig.cpp:1383 src/libslic3r/PrintConfig.cpp:4247
#: src/libslic3r/PrintConfig.cpp:4256 src/libslic3r/PrintConfig.cpp:4265
#: src/libslic3r/PrintConfig.cpp:4422 src/libslic3r/PrintConfig.cpp:4430
#: src/libslic3r/PrintConfig.cpp:4438 src/libslic3r/PrintConfig.cpp:4445
#: src/libslic3r/PrintConfig.cpp:4453 src/libslic3r/PrintConfig.cpp:4461
#: src/libslic3r/PrintConfig.cpp:4799 src/libslic3r/PrintConfig.cpp:4808
#: src/libslic3r/PrintConfig.cpp:4910 src/libslic3r/PrintConfig.cpp:4927
#: src/libslic3r/PrintConfig.cpp:4945 src/libslic3r/PrintConfig.cpp:4962
#: src/slic3r/GUI/RammingChart.cpp:94 src/slic3r/GUI/WipeTowerDialog.cpp:125
msgid "s"
msgstr "秒"

#: src/libslic3r/PrintConfig.cpp:1303
msgid "Stamping loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1304
msgid "Speed used for stamping."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1311
msgid "Stamping distance measured from the center of the cooling tube"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1312
msgid ""
"If set to nonzero value, filament is moved toward the nozzle between the "
"individual cooling moves (\"stamping\"). This option configures how long "
"this movement should be before the filament is retracted again."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1320
msgid "Number of cooling moves"
msgstr "冷卻動作數"

#: src/libslic3r/PrintConfig.cpp:1321
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr "經由在冷卻管中來回移動以冷卻線材。指定這些移動所需的次數。"

#: src/libslic3r/PrintConfig.cpp:1329
msgid "Speed of the first cooling move"
msgstr "第一次冷卻動作的速度"

#: src/libslic3r/PrintConfig.cpp:1330
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr "從這個速度開始，冷卻動作逐漸加速。"

#: src/libslic3r/PrintConfig.cpp:1337
msgid "Minimal purge on wipe tower"
msgstr "擦拭塔上的最小清潔程度"

#: src/libslic3r/PrintConfig.cpp:1338
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"替換工具後，新加載的線材在噴嘴內的確切位置可能未知，在此之前線材壓力可能還不"
"穩定。因此在將打印充入填充物或犧牲品之前，PrusaSlicer 將先打印在擦拭塔，以可"
"靠的產生連續填充物或廢棄線之擠壓。"

#: src/libslic3r/PrintConfig.cpp:1342 src/libslic3r/PrintConfig.cpp:1399
#: src/libslic3r/PrintConfig.cpp:2452
msgid "mm³"
msgstr "mm³"

#: src/libslic3r/PrintConfig.cpp:1348
msgid "Speed of the last cooling move"
msgstr "最後一次冷卻動作的速度"

#: src/libslic3r/PrintConfig.cpp:1349
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr "降溫動作正逐漸朝著這個設定加速。"

#: src/libslic3r/PrintConfig.cpp:1356
msgid "Purge volume multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1357
msgid ""
"Purging volume on the wipe tower is determined by 'multimaterial_purging' in "
"Printer Settings. This option allows to modify the volume on filament level. "
"Note that the project can override this by setting project-specific values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1366
msgid "Filament load time"
msgstr "線材匯入時間"

#: src/libslic3r/PrintConfig.cpp:1367
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"打印機韌體（或多材料單元 2.0）在替換工具期間（執行 T 代碼時）加載新線材的時"
"間。該時間由 G-code 時間估算器添加到總打印時間中。"

#: src/libslic3r/PrintConfig.cpp:1374
msgid "Ramming parameters"
msgstr "衝壓擠出參數"

#: src/libslic3r/PrintConfig.cpp:1375
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr "此字符串由衝壓擠出對話框編輯並包含衝壓擠出的特定參數。"

#: src/libslic3r/PrintConfig.cpp:1381
msgid "Filament unload time"
msgstr "線材卸料時間"

#: src/libslic3r/PrintConfig.cpp:1382
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"打印機韌體（或多材料單元 2.0）在替換工具期間（執行 T 代碼時）卸載線材的時間。"
"該時間由 G-code 時間估算器添加到總打印時間中。"

#: src/libslic3r/PrintConfig.cpp:1389
msgid "Enable ramming for multitool setups"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1390
msgid ""
"Perform ramming when using multitool printer (i.e. when the 'Single Extruder "
"Multimaterial' in Printer Settings is unchecked). When checked, a small "
"amount of filament is rapidly extruded on the wipe tower just before the "
"toolchange. This option is only used when the wipe tower is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1397
msgid "Multitool ramming volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1398
msgid "The volume to be rammed before the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1405
msgid "Multitool ramming flow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1406
msgid "Flow used for ramming the filament before the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1413 src/slic3r/GUI/BedShapeDialog.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2028
msgid "Diameter"
msgstr "線材直徑"

#: src/libslic3r/PrintConfig.cpp:1414
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"請在此輸入您的線材直徑。這個需要良好的精度，因此請使用游標尺沿線材進行多次測"
"量，然後計算平均值。"

#: src/libslic3r/PrintConfig.cpp:1421 src/libslic3r/PrintConfig.cpp:4398
#: src/libslic3r/PrintConfig.cpp:4399
msgid "Density"
msgstr "線材密度"

#: src/libslic3r/PrintConfig.cpp:1422
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"在此輸入您的線材密度。這只會用於統計資訊。有個方法是秤量已知長度的線材重量並"
"計算長度與體積的比率。更好的方式是直接經由位移計算體積。"

#: src/libslic3r/PrintConfig.cpp:1425
msgid "g/cm³"
msgstr "g/cm³"

#: src/libslic3r/PrintConfig.cpp:1430
msgid "Filament type"
msgstr "線材類型"

#: src/libslic3r/PrintConfig.cpp:1431
msgid "The filament material type for use in custom G-codes."
msgstr "用於自訂 G-codes 的線材類型。"

#: src/libslic3r/PrintConfig.cpp:1459
msgid "Soluble material"
msgstr "可溶性材料"

#: src/libslic3r/PrintConfig.cpp:1460
msgid "Soluble material is most likely used for a soluble support."
msgstr "可溶性材料最可能用於可溶性支撐的材料。"

#: src/libslic3r/PrintConfig.cpp:1465
msgid "Abrasive material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1466
msgid ""
"This flag means that the material is abrasive and requires a hardened "
"nozzle. The value is used by the printer to check it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1471 src/libslic3r/PrintConfig.cpp:4405
#: src/libslic3r/PrintConfig.cpp:4406 src/slic3r/GUI/GLCanvas3D.cpp:1822
#: src/slic3r/GUI/Sidebar.cpp:1069
msgid "Cost"
msgstr "整軸線價格"

#: src/libslic3r/PrintConfig.cpp:1472
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr "請在此輸入每公斤線材的成本。這只會用於統計資訊。"

#: src/libslic3r/PrintConfig.cpp:1473
msgid "money/kg"
msgstr "成本/kg"

#: src/libslic3r/PrintConfig.cpp:1478
msgid "Spool weight"
msgstr "整軸線的重量"

#: src/libslic3r/PrintConfig.cpp:1479
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""
"輸入空線軸的重量。可以在打印前秤量已消耗一部份線材的線軸之重量，並且可以將所"
"測量的重量與線軸的線材重量進行比對，以查明線軸上的線材餘量是否足以完成打印。"

#: src/libslic3r/PrintConfig.cpp:1483 src/slic3r/GUI/GCodeViewer.cpp:2130
msgid "g"
msgstr "公克"

#: src/libslic3r/PrintConfig.cpp:1492 src/libslic3r/PrintConfig.cpp:4505
msgid "(Unknown)"
msgstr "(未知)"

#: src/libslic3r/PrintConfig.cpp:1496
msgid "Shrinkage compensation XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1497
msgid ""
"Enter your filament shrinkage percentages for the X and Y axes here to apply "
"scaling of the object to compensate for shrinkage in the X and Y axes. For "
"example, if you measured 99mm instead of 100mm, enter 1%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1507
msgid "Shrinkage compensation Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1508
msgid ""
"Enter your filament shrinkage percentages for the Z axis here to apply "
"scaling of the object to compensate for shrinkage in the Z axis. For "
"example, if you measured 99mm instead of 100mm, enter 1%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1518
msgid "Fill angle"
msgstr "填充角度"

#: src/libslic3r/PrintConfig.cpp:1520
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"填充的預設方向角度。交叉劃線將會應用在此方式，橋接則將使用 PrusaSlicer 的線狀"
"填充，因此這個設定不會影響它們。"

#: src/libslic3r/PrintConfig.cpp:1531
msgid "Fill density"
msgstr "填充密度"

#: src/libslic3r/PrintConfig.cpp:1533
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr "內部填充的密度，以 0% - 100% 範圍表示。"

#: src/libslic3r/PrintConfig.cpp:1556
msgid "Fill pattern"
msgstr "填充花紋"

#: src/libslic3r/PrintConfig.cpp:1558
msgid "Fill pattern for general low-density infill."
msgstr "一般低密度填充的填充花紋。"

#: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:3397
msgid "Grid"
msgstr "網格"

#: src/libslic3r/PrintConfig.cpp:1563
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:68
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:96
msgid "Triangles"
msgstr "三角型"

#: src/libslic3r/PrintConfig.cpp:1564
msgid "Stars"
msgstr "星星"

#: src/libslic3r/PrintConfig.cpp:1565
msgid "Cubic"
msgstr "立方體"

#: src/libslic3r/PrintConfig.cpp:1566
msgid "Line"
msgstr "線條"

#: src/libslic3r/PrintConfig.cpp:1568 src/libslic3r/PrintConfig.cpp:3353
msgid "Honeycomb"
msgstr "蜂巢"

#: src/libslic3r/PrintConfig.cpp:1569
msgid "3D Honeycomb"
msgstr "3D蜂巢"

#: src/libslic3r/PrintConfig.cpp:1570
msgid "Gyroid"
msgstr "螺旋型"

#: src/libslic3r/PrintConfig.cpp:1574
msgid "Adaptive Cubic"
msgstr "適應立方體"

#: src/libslic3r/PrintConfig.cpp:1575
msgid "Support Cubic"
msgstr "支撐立方體"

#: src/libslic3r/PrintConfig.cpp:1576
msgid "Lightning"
msgstr "閃電"

#: src/libslic3r/PrintConfig.cpp:1577
msgid "Zig Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1582 src/libslic3r/PrintConfig.cpp:1600
#: src/libslic3r/PrintConfig.cpp:1610 src/libslic3r/PrintConfig.cpp:1667
#: src/slic3r/GUI/GCodeViewer.cpp:2908
msgid "First layer"
msgstr "第一層"

#: src/libslic3r/PrintConfig.cpp:1583
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr "這是您的打印機將使用於第一層的加速度。設定為零以禁用第一層的加速控制。"

#: src/libslic3r/PrintConfig.cpp:1591
msgid "First object layer over raft interface"
msgstr "筏板介面上的第一個模型層"

#: src/libslic3r/PrintConfig.cpp:1592
msgid ""
"This is the acceleration your printer will use for first layer of object "
"above raft interface. Set zero to disable acceleration control for first "
"layer of object above raft interface."
msgstr ""
"這是您的打印機將用於筏板介面上方第一層模型的加速度。設定為零以禁用筏板介面上"
"方第一層模型的加速度控制。"

#: src/libslic3r/PrintConfig.cpp:1601
msgid "First layer bed temperature"
msgstr "第一層時的載台溫度"

#: src/libslic3r/PrintConfig.cpp:1602
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr "第一層時加熱載台的溫度。將此設定為零以禁用輸出載台溫度的控制命令。"

#: src/libslic3r/PrintConfig.cpp:1612
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"將此設定為非零值以設定第一層的手動擠出寬度。您可以使用它來強制較厚的擠出物以"
"獲得更好的附著力。如果以百分比表示（例如 120%），它將在第一層高度上計算。如果"
"設定為零，它將使用預設的擠出寬度。"

#: src/libslic3r/PrintConfig.cpp:1624 src/slic3r/GUI/ConfigManipulation.cpp:125
msgid "First layer height"
msgstr "第一層打印層高"

#: src/libslic3r/PrintConfig.cpp:1626
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates."
msgstr ""
"當使用非常低的層高進行打印時，您可能仍希望打印較厚的底層以提高非完美底板的附"
"著力和公差。"

#: src/libslic3r/PrintConfig.cpp:1634
msgid "First layer speed"
msgstr "第一層速度"

#: src/libslic3r/PrintConfig.cpp:1635
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"如果以mm/s 絕對值表示，則此速度將應用於第一層的所有打印移動，而無論打印其類型"
"如何。如果以百分比表示（例如：40%），它將縮放預設速度。"

#: src/libslic3r/PrintConfig.cpp:1645
msgid "First layer solid infill speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1646
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to the "
"solid infill print moves of the first layer. If expressed as a percentage "
"(for example: 40%) it will be a percantage of the solid infill speed (for "
"example: 40% of the solid infill speed). Note that 0 means that the \"First "
"layer speed\" value will be used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1657
msgid "Speed of object first layer over raft interface"
msgstr "模型第一層在筏板介面上的速度"

#: src/libslic3r/PrintConfig.cpp:1658
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first object layer above raft interface, regardless "
"of their type. If expressed as a percentage (for example: 40%) it will scale "
"the default speeds."
msgstr ""
"如果以 mm/s 的絕對值表示，則此速度將應用於筏板介面上方第一個模型層的所有打印"
"移動，無論其打印類型如何。如果以百分比表示（例如：40%），它將縮放預設速度。"

#: src/libslic3r/PrintConfig.cpp:1668
msgid "First layer nozzle temperature"
msgstr "第一層噴嘴溫度"

#: src/libslic3r/PrintConfig.cpp:1669
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""
"第一層的噴嘴溫度。如果要在打印期間手動控制溫度，請將此設定為零以禁用輸出 G-"
"code 中的溫度控制命令。"

#: src/libslic3r/PrintConfig.cpp:1677
msgid "Full fan speed at layer"
msgstr "風扇以全速使用在打印層上"

#: src/libslic3r/PrintConfig.cpp:1678
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""
"風扇速度將從“disable_fan_first_layers”層的零然後線性上升"
"到“full_fan_speed_layer”層的最高值。如果低"
"於“disable_fan_first_layers”，“full_fan_speed_layer”將被忽略，在這種情況下，"
"風扇將在“disable_fan_first_layers”+ 1 層以最高允許的速度運行。"

#: src/libslic3r/PrintConfig.cpp:1688 src/libslic3r/PrintConfig.cpp:1689
#: src/libslic3r/PrintConfig.cpp:1701 src/libslic3r/PrintConfig.cpp:1711
#: src/slic3r/GUI/GUI_Factories.cpp:163
msgid "Fuzzy Skin"
msgstr "茸毛表面"

#: src/libslic3r/PrintConfig.cpp:1690
msgid "Fuzzy skin type."
msgstr "模糊表面的類型。"

#: src/libslic3r/PrintConfig.cpp:1692 src/slic3r/GUI/ConfigWizard.cpp:432
#: src/slic3r/GUI/ConfigWizard.cpp:872 src/slic3r/GUI/FileArchiveDialog.cpp:272
#: src/slic3r/GUI/FileArchiveDialog.cpp:290
#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:119
#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:280
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2018
#: src/slic3r/GUI/Preferences.cpp:580
msgid "None"
msgstr "無"

#: src/libslic3r/PrintConfig.cpp:1693
msgid "Outside walls"
msgstr "外牆"

#: src/libslic3r/PrintConfig.cpp:1694
msgid "All walls"
msgstr "所有的牆"

#: src/libslic3r/PrintConfig.cpp:1700
msgid "Fuzzy skin thickness"
msgstr "模糊表面的厚度"

#: src/libslic3r/PrintConfig.cpp:1702
msgid ""
"The maximum distance that each skin point can be offset (both ways), "
"measured perpendicular to the perimeter wall."
msgstr "每個表面點可以偏移（雙向）的最大距離，這個是垂直於邊緣牆之測量值。"

#: src/libslic3r/PrintConfig.cpp:1710
msgid "Fuzzy skin point distance"
msgstr "模糊表面的點距"

#: src/libslic3r/PrintConfig.cpp:1712
msgid ""
"Perimeters will be split into multiple segments by inserting Fuzzy skin "
"points. Lowering the Fuzzy skin point distance will increase the number of "
"randomly offset points on the perimeter wall."
msgstr ""
"經由插入模糊表面點，邊緣將被分成多個部分。降低模糊表面點距離將增加邊緣牆上隨"
"機偏移點的數量。"

#: src/libslic3r/PrintConfig.cpp:1720
msgid "Fill gaps"
msgstr "填補孔隙"

#: src/libslic3r/PrintConfig.cpp:1722
msgid ""
"Enables filling of gaps between perimeters and between the inner most "
"perimeters and infill."
msgstr "能夠填充邊緣間和最內部邊緣與填充之間的小孔隙。"

#: src/libslic3r/PrintConfig.cpp:1729
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"使用最短的之字形移動以填充小孔隙的速度。將此值保持在合理的最低值以避免過多的"
"晃動和共振問題。設定為零以禁用孔隙填補。"

#: src/libslic3r/PrintConfig.cpp:1737
msgid "Verbose G-code"
msgstr "詳細的 G-code"

#: src/libslic3r/PrintConfig.cpp:1738
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"啟用此功能可獲得帶有註釋的 G-code 檔案，每一行皆使用文字加以進行說明。如果您"
"從 SD 卡打印，額外的檔案大小可能會使您的韌體處理速度變慢。"

#: src/libslic3r/PrintConfig.cpp:1745
msgid "G-code flavor"
msgstr "G-code 訊息"

#: src/libslic3r/PrintConfig.cpp:1746
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""
"有一些 G/M -code 的命令，包括溫度控制與其他命令之間並不能通用。您可以將此選項"
"設定為打印機的韌體以獲得相容的輸出。 “無擠出”的形式將阻止 PrusaSlicer 匯出任"
"何帶有線材擠出值的內容。"

#: src/libslic3r/PrintConfig.cpp:1762
msgid "No extrusion"
msgstr "無擠出"

#: src/libslic3r/PrintConfig.cpp:1768
msgid "Label objects"
msgstr "標籤模型"

#: src/libslic3r/PrintConfig.cpp:1769
msgid ""
"Selects whether labels should be exported at object boundaries and in what "
"format.\n"
"OctoPrint = comments to be consumed by OctoPrint CancelObject plugin.\n"
"Firmware = firmware specific G-code (it will be chosen based on firmware "
"flavor and it can end up to be empty).\n"
"\n"
"This settings is NOT compatible with Single Extruder Multi Material setup "
"and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1776
msgid "OctoPrint comments"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1777
msgid "Firmware-specific"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1783
msgid "G-code substitutions"
msgstr "G-code 替換"

#: src/libslic3r/PrintConfig.cpp:1784
msgid "Find / replace patterns in G-code lines and substitute them."
msgstr "在 G-code 行中尋找/替換模式並替換它們。"

#: src/libslic3r/PrintConfig.cpp:1789
msgid "High extruder current on filament swap"
msgstr "線材交換時的擠出機電流"

#: src/libslic3r/PrintConfig.cpp:1790
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"在線材交換順序時增加擠出機馬達的電流可能是有益的，這樣做可以允許快速的衝壓擠"
"出進料速率同時解決前端不平整材料加載時之阻力。"

#: src/libslic3r/PrintConfig.cpp:1798
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr "這是您的打印機用於填充時的加速度。設定為零以禁用填充的加速控制。"

#: src/libslic3r/PrintConfig.cpp:1807
msgid ""
"This is the acceleration your printer will use for solid infill. Set zero to "
"use the value for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1816
msgid ""
"This is the acceleration your printer will use for top solid infill. Set "
"zero to use the value for solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1825
msgid ""
"This is the acceleration your printer will use for wipe tower. Set zero to "
"disable acceleration control for the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1833 src/libslic3r/PrintConfig.cpp:3623
#: src/slic3r/GUI/GCodeViewer.cpp:397 src/slic3r/GUI/GCodeViewer.cpp:2533
#: src/slic3r/GUI/GCodeViewer.cpp:3000
msgid "Travel"
msgstr "移動"

#: src/libslic3r/PrintConfig.cpp:1834
msgid ""
"This is the acceleration your printer will use for travel moves. Set zero to "
"disable acceleration control for travel."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1842
msgid "Combine infill every"
msgstr "組合填充每一個"

#: src/libslic3r/PrintConfig.cpp:1844
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"此功能允許組合填充並經由擠出較厚的填充層來加快打印速度，同時保持較薄的邊緣，"
"從而提高準確性。"

#: src/libslic3r/PrintConfig.cpp:1847
msgid "Combine infill every n layers"
msgstr "每 n 層組合填充"

#: src/libslic3r/PrintConfig.cpp:1853
msgid "Length of the infill anchor"
msgstr "填充錨定的長度"

#: src/libslic3r/PrintConfig.cpp:1855
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""
"將填充線連接到內部邊緣並有額外邊緣的短打印段。如果以百分比表示（例如：15%）它"
"是經由填充擠出寬度計算的。PrusaSlicer 嘗試將兩條緊密填充線連接到短邊緣段。如"
"果找不到短於 infill_anchor_max 的此類邊緣段，則填充線僅在一側連接到邊緣段，所"
"取得的邊緣段的長度僅限於此參數，但不超過anchor_length_max的設定值。您可以將此"
"參數設定為零，以禁用連接到單個填充線的錨定邊緣。"

#: src/libslic3r/PrintConfig.cpp:1865
msgid "0 (no open anchors)"
msgstr "0（無開放錨定）"

#: src/libslic3r/PrintConfig.cpp:1866 src/libslic3r/PrintConfig.cpp:1889
msgid "1 mm"
msgstr "1 mm"

#: src/libslic3r/PrintConfig.cpp:1867 src/libslic3r/PrintConfig.cpp:1890
msgid "2 mm"
msgstr "2 mm"

#: src/libslic3r/PrintConfig.cpp:1868 src/libslic3r/PrintConfig.cpp:1891
msgid "5 mm"
msgstr "5 mm"

#: src/libslic3r/PrintConfig.cpp:1869 src/libslic3r/PrintConfig.cpp:1892
msgid "10 mm"
msgstr "10 mm"

#: src/libslic3r/PrintConfig.cpp:1870 src/libslic3r/PrintConfig.cpp:1893
msgid "1000 (unlimited)"
msgstr "1000 (unlimited)"

#: src/libslic3r/PrintConfig.cpp:1876
msgid "Maximum length of the infill anchor"
msgstr "填充錨定的最大長度"

#: src/libslic3r/PrintConfig.cpp:1878
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""
"將填充線連接到內部邊緣，並附有額外邊緣的短段。如果以百分比表示（例如：15%）它"
"是經由填充擠出寬度計算的。PrusaSlicer 嘗試將兩條緊密填充線連接到短邊緣段。如"
"果找不到比此參數短的此類邊緣段，則填充線僅在一側連接到邊緣段，所拍攝的邊緣段"
"的長度限制為infill_anchor，但不超過此參數。將此參數設定為零以禁用錨定。"

#: src/libslic3r/PrintConfig.cpp:1888
msgid "0 (not anchored)"
msgstr "0（無錨定）"

#: src/libslic3r/PrintConfig.cpp:1899
msgid "Infill extruder"
msgstr "填充擠出機"

#: src/libslic3r/PrintConfig.cpp:1901
msgid "The extruder to use when printing infill."
msgstr "打印填充時使用的擠出機。"

#: src/libslic3r/PrintConfig.cpp:1909
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"您可以將此設為非零值以設定填充的手動擠出寬度。如果保留為零，將使用預設擠出寬"
"度（如果已設定），否則將使用 1.125 x 噴嘴直徑。您可能希望使用更厚的擠出來加速"
"填充並使您的零件更堅固。如果以百分比（例如 90%）表示，它將根據層高的百分比來"
"計算。"

#: src/libslic3r/PrintConfig.cpp:1920
msgid "Infill before perimeters"
msgstr "在打印邊緣之前先打印填充"

#: src/libslic3r/PrintConfig.cpp:1921
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr "此選項將切換邊緣和填充的打印順序，使後者優先打印。"

#: src/libslic3r/PrintConfig.cpp:1935
msgid "Infill/perimeters overlap"
msgstr "填充/邊緣重疊"

#: src/libslic3r/PrintConfig.cpp:1937
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"此設定用在填充和邊緣之間使用額外的重疊以實現更好的結合。從理論上來說這並非必"
"需的設定，但因為反作用力緣故可能會導致打印造成間距的問題才有此設定。如果以百"
"分比表示（例如：15%），則它是以周邊擠壓寬度的百分比計算的。"

#: src/libslic3r/PrintConfig.cpp:1948
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr "打印內部填充的速度。零為自動設定。"

#: src/libslic3r/PrintConfig.cpp:1956
msgid "Inherits profile"
msgstr "繼承設定檔"

#: src/libslic3r/PrintConfig.cpp:1957
msgid "Name of the profile, from which this profile inherits."
msgstr "設定檔的名稱，從此設定檔中繼承。"

#: src/libslic3r/PrintConfig.cpp:1970
msgid "Interface shells"
msgstr "支撐介面外殼"

#: src/libslic3r/PrintConfig.cpp:1971
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"強制在相鄰材料/模型之間生成實體外殼。適用於使用半透明材料或使用可溶性支撐材料"
"的多擠出機打印。"

#: src/libslic3r/PrintConfig.cpp:1979
msgid "Maximum width of a segmented region"
msgstr "分隔區域的最大寬度"

#: src/libslic3r/PrintConfig.cpp:1980
msgid "Maximum width of a segmented region. Zero disables this feature."
msgstr "分隔區域的最大寬度。零表示禁用此功能。"

#: src/libslic3r/PrintConfig.cpp:1981 src/libslic3r/PrintConfig.cpp:1992
#: src/libslic3r/PrintConfig.cpp:2666 src/libslic3r/PrintConfig.cpp:2675
msgid "mm (zero to disable)"
msgstr "mm (零為禁用)"

#: src/libslic3r/PrintConfig.cpp:1988
msgid "Interlocking depth of a segmented region"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1989
msgid ""
"Interlocking depth of a segmented region. It will be ignored if "
"\"mmu_segmented_region_max_width\" is zero or if "
"\"mmu_segmented_region_interlocking_depth\"is bigger then "
"\"mmu_segmented_region_max_width\". Zero disables this feature."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1999
msgid "Enable ironing"
msgstr "啟用熨平模式"

#: src/libslic3r/PrintConfig.cpp:2000
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr "使用加熱打印頭熨平頂層以獲得光滑的表面"

#: src/libslic3r/PrintConfig.cpp:2006
msgid "Use beam interlocking"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2007
msgid ""
"Generate interlocking beam structure at the locations where different "
"filaments touch. This improves the adhesion between filaments, especially "
"models printed in different materials."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2013
msgid "Interlocking beam width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2014
msgid "The width of the interlocking structure beams."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2022
msgid "Interlocking direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2023
msgid "Orientation of interlocking beams."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2032
msgid "Interlocking beam layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2033
msgid ""
"The height of the beams of the interlocking structure, measured in number of "
"layers. Less layers is stronger, but more prone to defects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2040
msgid "Interlocking depth"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2041
msgid ""
"The distance from the boundary between filaments to generate interlocking "
"structure, measured in cells. Too few cells will result in poor adhesion."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2048
msgid "Interlocking boundary avoidance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2049
msgid ""
"The distance from the outside of a model where interlocking structures will "
"not be generated, measured in cells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2056 src/libslic3r/PrintConfig.cpp:2058
msgid "Ironing Type"
msgstr "熨平類型"

#: src/libslic3r/PrintConfig.cpp:2062
msgid "All solid surfaces"
msgstr "所有實體表面"

#: src/libslic3r/PrintConfig.cpp:2068
msgid "Flow rate"
msgstr "流量"

#: src/libslic3r/PrintConfig.cpp:2070
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr "相對於模型之正常層高度的流速百分比。"

#: src/libslic3r/PrintConfig.cpp:2078
msgid "Spacing between ironing passes"
msgstr "熨平次數的間距"

#: src/libslic3r/PrintConfig.cpp:2080
msgid "Distance between ironing lines"
msgstr "熨平線與線間的距離"

#: src/libslic3r/PrintConfig.cpp:2097
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"此自定義代碼在每次打印層更改時插入，其在 Z 移動之後和擠出機移動到第一個打印層"
"之前。請注意，您可以為所有 PrusaSlicer 設定以及 [layer_num] 和 [layer_z] 使用"
"佔位符變數。"

#: src/libslic3r/PrintConfig.cpp:2108
msgid "Supports remaining times"
msgstr "支撐剩餘時間"

#: src/libslic3r/PrintConfig.cpp:2109
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"以 1 分鐘的間隔將 M73 P[打印的百分比] R[以分鐘為單位的剩餘時間] 傳送到 G-code"
"中，讓韌體顯示準確的剩餘時間。但到目前為止只有 Prusa i3 MK3 韌體可以識別 "
"M73。 但 i3 MK3 韌體也支援 M73 Qxx Sxx 的靜音模式。"

#: src/libslic3r/PrintConfig.cpp:2117
msgid "Supports stealth mode"
msgstr "支援靜音模式"

#: src/libslic3r/PrintConfig.cpp:2118
msgid "The firmware supports stealth mode"
msgstr "韌體支援靜音模式"

#: src/libslic3r/PrintConfig.cpp:2123
msgid "Supports binary G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2124
msgid ""
"Enable, if the firmware supports binary G-code format (bgcode). To generate ."
"bgcode files, make sure you have binary G-code enabled in Configuration-"
">Preferences->Other."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2130
msgid "How to apply limits"
msgstr "如何應用限制"

#: src/libslic3r/PrintConfig.cpp:2131
msgid "Purpose of Machine Limits"
msgstr "機器限制的目的"

#: src/libslic3r/PrintConfig.cpp:2132 src/libslic3r/PrintConfig.cpp:2165
#: src/libslic3r/PrintConfig.cpp:2182 src/libslic3r/PrintConfig.cpp:2199
#: src/libslic3r/PrintConfig.cpp:2215 src/libslic3r/PrintConfig.cpp:2225
#: src/libslic3r/PrintConfig.cpp:2235 src/libslic3r/PrintConfig.cpp:2246
#: src/libslic3r/PrintConfig.cpp:2257 src/slic3r/GUI/Tab.cpp:3107
#: src/slic3r/GUI/Tab.cpp:3423
msgid "Machine limits"
msgstr "機器限制"

#: src/libslic3r/PrintConfig.cpp:2133
msgid "How to apply the Machine Limits"
msgstr "如何應用機器限制"

#: src/libslic3r/PrintConfig.cpp:2135
msgid "Emit to G-code"
msgstr "傳送到 G-code"

#: src/libslic3r/PrintConfig.cpp:2136
msgid "Use for time estimate"
msgstr "用於時間估算"

#: src/libslic3r/PrintConfig.cpp:2137
msgid "Ignore"
msgstr "忽略"

#: src/libslic3r/PrintConfig.cpp:2161
msgid "Maximum feedrate X"
msgstr "最大進給率 X"

#: src/libslic3r/PrintConfig.cpp:2162
msgid "Maximum feedrate Y"
msgstr "最大進給率 Y"

#: src/libslic3r/PrintConfig.cpp:2163
msgid "Maximum feedrate Z"
msgstr "最大進給率 Z"

#: src/libslic3r/PrintConfig.cpp:2164
msgid "Maximum feedrate E"
msgstr "最大進給率 E"

#: src/libslic3r/PrintConfig.cpp:2167
msgid "Maximum feedrate of the X axis"
msgstr "X 軸最大進給速度"

#: src/libslic3r/PrintConfig.cpp:2168
msgid "Maximum feedrate of the Y axis"
msgstr "Y 軸最大進給速度"

#: src/libslic3r/PrintConfig.cpp:2169
msgid "Maximum feedrate of the Z axis"
msgstr "Z 軸最大進給速度"

#: src/libslic3r/PrintConfig.cpp:2170
msgid "Maximum feedrate of the E axis"
msgstr "E 軸最大進給速度"

#: src/libslic3r/PrintConfig.cpp:2178
msgid "Maximum acceleration X"
msgstr "最大加速度 X"

#: src/libslic3r/PrintConfig.cpp:2179
msgid "Maximum acceleration Y"
msgstr "最大加速度 Y"

#: src/libslic3r/PrintConfig.cpp:2180
msgid "Maximum acceleration Z"
msgstr "最大加速度 Z"

#: src/libslic3r/PrintConfig.cpp:2181
msgid "Maximum acceleration E"
msgstr "最大加速度 E"

#: src/libslic3r/PrintConfig.cpp:2184
msgid "Maximum acceleration of the X axis"
msgstr "X 軸最大加速度"

#: src/libslic3r/PrintConfig.cpp:2185
msgid "Maximum acceleration of the Y axis"
msgstr "Y 軸最大加速度"

#: src/libslic3r/PrintConfig.cpp:2186
msgid "Maximum acceleration of the Z axis"
msgstr "Z 軸最大加速度"

#: src/libslic3r/PrintConfig.cpp:2187
msgid "Maximum acceleration of the E axis"
msgstr "E 軸最大加速度"

#: src/libslic3r/PrintConfig.cpp:2195
msgid "Maximum jerk X"
msgstr "最大抖動 X"

#: src/libslic3r/PrintConfig.cpp:2196
msgid "Maximum jerk Y"
msgstr "最大抖動 Y"

#: src/libslic3r/PrintConfig.cpp:2197
msgid "Maximum jerk Z"
msgstr "最大抖動 Z"

#: src/libslic3r/PrintConfig.cpp:2198
msgid "Maximum jerk E"
msgstr "最大抖動 E"

#: src/libslic3r/PrintConfig.cpp:2201
msgid "Maximum jerk of the X axis"
msgstr "X 軸的最大抖動速度"

#: src/libslic3r/PrintConfig.cpp:2202
msgid "Maximum jerk of the Y axis"
msgstr "Y 軸的最大抖動速度"

#: src/libslic3r/PrintConfig.cpp:2203
msgid "Maximum jerk of the Z axis"
msgstr "Z 軸的最大抖動速度"

#: src/libslic3r/PrintConfig.cpp:2204
msgid "Maximum jerk of the E axis"
msgstr "E 軸的最大抖動速度"

#: src/libslic3r/PrintConfig.cpp:2214
msgid "Minimum feedrate when extruding"
msgstr "擠出時的最小進給率"

#: src/libslic3r/PrintConfig.cpp:2216
msgid "Minimum feedrate when extruding (M205 S)"
msgstr "擠出時的最小進給率 (M205 S)"

#: src/libslic3r/PrintConfig.cpp:2224
msgid "Minimum travel feedrate"
msgstr "移動時的最小進給率"

#: src/libslic3r/PrintConfig.cpp:2226
msgid "Minimum travel feedrate (M205 T)"
msgstr "移動時的最小進給率 (M205 T)"

#: src/libslic3r/PrintConfig.cpp:2234 src/libslic3r/PrintConfig.cpp:2236
msgid "Maximum acceleration when extruding"
msgstr "擠出時的最大加速度"

#: src/libslic3r/PrintConfig.cpp:2245
msgid "Maximum acceleration when retracting"
msgstr "回抽時的最大加速度"

#: src/libslic3r/PrintConfig.cpp:2247
msgid ""
"Maximum acceleration when retracting.\n"
"\n"
"Not used for RepRapFirmware, which does not support it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2256
msgid "Maximum acceleration for travel moves"
msgstr "移動時的最大加速度"

#: src/libslic3r/PrintConfig.cpp:2258
msgid "Maximum acceleration for travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2265 src/libslic3r/PrintConfig.cpp:2274
msgid "Max"
msgstr "最大"

#: src/libslic3r/PrintConfig.cpp:2266
msgid "This setting represents the maximum speed of your fan."
msgstr "此設定代表風扇的最高轉度。"

#: src/libslic3r/PrintConfig.cpp:2275
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"這是該擠出機的最高可打印層高度，用於覆寫可變層高度和支援層高度。建議的最大層"
"高為擠出寬度的75%，以實現合理的層間黏結。如果設定為 0，則層高限制為噴嘴直徑"
"的 75% 。"

#: src/libslic3r/PrintConfig.cpp:2285
msgid "Max print speed"
msgstr "最大打印速度"

#: src/libslic3r/PrintConfig.cpp:2286
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"當將其速度設定為 0 時，PrusaSlicer 將會自動計算最佳速度以保持恆定的擠出機壓"
"力。此實驗設定用於設定您所容許的最高打印速度。"

#: src/libslic3r/PrintConfig.cpp:2296
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr "此實驗設定用於設定擠出機所能支援的最高體積速度。"

#: src/libslic3r/PrintConfig.cpp:2304
msgid "Max volumetric slope positive"
msgstr "最大正體積斜率"

#: src/libslic3r/PrintConfig.cpp:2305
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s "
"(feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""
"這個實驗設定用於限制擠出速率的變化速度，以實現從較低速度到較高速度的轉變。 "
"1.8 mm³/s² 的值確保擠出速率從 1.8 mm³/s（0.45 mm 擠出寬度，0.2 mm 擠出高度，"
"進給速度 20 mm/s）變為 5.4 mm³/s（進給速度 60 mm/s）至少需要 2 秒。"

#: src/libslic3r/PrintConfig.cpp:2310 src/libslic3r/PrintConfig.cpp:2322
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:2316
msgid "Max volumetric slope negative"
msgstr "最大負體積斜率"

#: src/libslic3r/PrintConfig.cpp:2317
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s "
"(feedrate 20 mm/s) will take at least 2 seconds."
msgstr ""
"這個實驗設定用於限制擠出速率的變化速度，以實現從高速到低速的轉變。 1.8 mm³/"
"s² 的值確保擠出速率從 5.4 mm³/s（0.45 mm 擠出寬度，0.2 mm 擠出高度，進給速度 "
"60 mm/s）變為 1.8 mm³/s（進給速度 20 mm/s）至少需要 2 秒。"

#: src/libslic3r/PrintConfig.cpp:2328 src/libslic3r/PrintConfig.cpp:2337
msgid "Min"
msgstr "最小"

#: src/libslic3r/PrintConfig.cpp:2329
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr "此設定表示您的風扇工作所需的最小 PWM。"

#: src/libslic3r/PrintConfig.cpp:2338
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"這是該擠出機的最低可打印層高，並限制了可變層高的解析度。一般的設定值介於 "
"0.05 mm和 0.1 mm之間。"

#: src/libslic3r/PrintConfig.cpp:2346
msgid "Min print speed"
msgstr "最小打印速度"

#: src/libslic3r/PrintConfig.cpp:2347
msgid "Slic3r will not scale speed down below this speed."
msgstr "PrusaSlicer 不會將速度降低到低於此設定的速度。"

#: src/libslic3r/PrintConfig.cpp:2354
msgid "Minimal filament extrusion length"
msgstr "最小的線材擠出長度"

#: src/libslic3r/PrintConfig.cpp:2355
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"在底層上消耗指定的材料量以產生裙邊，對於多擠出機的機器而言，這個最小值也適用"
"於每個擠出機。"

#: src/libslic3r/PrintConfig.cpp:2364
msgid "Configuration notes"
msgstr "設定註釋"

#: src/libslic3r/PrintConfig.cpp:2365
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr "您可以把個人註釋放在這裡。此內容將添加到 G-code 標題註釋中。"

#: src/libslic3r/PrintConfig.cpp:2374 src/slic3r/GUI/Tab.cpp:3216
msgid "Nozzle diameter"
msgstr "噴嘴孔徑"

#: src/libslic3r/PrintConfig.cpp:2375
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "這是擠出機噴嘴的直徑（例如：0.5、0.35 等）"

#: src/libslic3r/PrintConfig.cpp:2380
msgid "Host Type"
msgstr "主機類型"

#: src/libslic3r/PrintConfig.cpp:2381
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
"PrusaSlicer 可以將 G-code 檔案上傳到打印機主機。該字串必須包含主機的種類。"

#: src/libslic3r/PrintConfig.cpp:2399
msgid "Only retract when crossing perimeters"
msgstr "僅在穿越邊緣時回抽"

#: src/libslic3r/PrintConfig.cpp:2400
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""
"在行進路徑不會超過上層邊緣時禁用回抽（可能因此設定而消除渗漏或牽絲的問題）。"

#: src/libslic3r/PrintConfig.cpp:2406 src/libslic3r/PrintConfig.cpp:3686
#: src/slic3r/GUI/Tab.cpp:2229
msgid "Enable"
msgstr "啟用"

#. TRN PrintSettings: Enable ooze prevention
#: src/libslic3r/PrintConfig.cpp:2408
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2413
msgid "Output filename format"
msgstr "輸出檔案名稱格式"

#: src/libslic3r/PrintConfig.cpp:2414
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename_base], [default_output_extension]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2423
msgid "Detect bridging perimeters"
msgstr "檢測橋接邊緣"

#: src/libslic3r/PrintConfig.cpp:2425
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"調整懸空時流量的實驗選項（此時會使用橋接流量），將橋接速度應用於它們並啟用風"
"扇。"

#: src/libslic3r/PrintConfig.cpp:2431
msgid "Filament parking position"
msgstr "線材停放的位置"

#: src/libslic3r/PrintConfig.cpp:2432
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""
"擠出機尖端與卸載線材時停放位置的距離。這必須與打印機韌體中的設定值配合。"

#: src/libslic3r/PrintConfig.cpp:2440
msgid "Extra loading distance"
msgstr "額外的線材匯入長度"

#: src/libslic3r/PrintConfig.cpp:2441
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""
"當設定為零時，線材於匯入過程中從停留位置移出的距離與卸料期間移回的距離完全相"
"同。當為正數時他會被進一步加載，若為負數則加載的移動量比卸載時短。"

#: src/libslic3r/PrintConfig.cpp:2449
msgid "Purging volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2450
msgid ""
"Determines purging volume on the wipe tower. This can be modified in "
"Filament Settings ('filament_purge_multiplier') or overridden using project-"
"specific settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2457 src/libslic3r/PrintConfig.cpp:2482
#: src/libslic3r/PrintConfig.cpp:2496 src/libslic3r/PrintConfig.cpp:2506
msgid "Perimeters"
msgstr "邊緣"

#: src/libslic3r/PrintConfig.cpp:2458
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr "這是打印機將用於邊緣打印的加速度。設定為零以禁用邊緣打印的加速度控制。"

#: src/libslic3r/PrintConfig.cpp:2466
msgid ""
"This is the acceleration your printer will use for external perimeters. Set "
"zero to use the value for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2473
msgid "Perimeter extruder"
msgstr "邊緣擠出機"

#: src/libslic3r/PrintConfig.cpp:2475
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr "打印邊緣和帽邊所使用的擠出機。第一個擠出機數字是 1。"

#: src/libslic3r/PrintConfig.cpp:2484
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"將此設為非零值以設定邊緣的手動擠出寬度。您可能希望使用更薄的擠出來獲得更精確"
"的表面。如果保留為零，將使用預設擠出寬度（如果已設定的話），否則將使用 1.125 "
"x 噴嘴直徑。如果以百分比表示（例如 200%），它將根據層高的百分比進行計算。"

#: src/libslic3r/PrintConfig.cpp:2498
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr "邊緣打印的速度（輪廓，又稱為垂直外殼）。零為自動設定。"

#: src/libslic3r/PrintConfig.cpp:2508
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"此選項設定為每個打印層生成的邊緣數量。請注意，PrusaSlicer 可能會在檢測到傾斜"
"的表面時自動增加此數字，如果啟用了額外邊緣選項，則傾斜的表面會受益於更多的邊"
"緣。"

#: src/libslic3r/PrintConfig.cpp:2512
msgid "(minimum)"
msgstr "（最低）"

#: src/libslic3r/PrintConfig.cpp:2519 src/slic3r/GUI/Tab.cpp:1744
msgid "Post-processing scripts"
msgstr "後處理腳本"

#: src/libslic3r/PrintConfig.cpp:2520
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"如果您想經由自定義腳本處理輸出的 G-code，只需在此處列出它們的絕對路徑即可。用"
"分號來分隔多個腳本。腳本將作為第一個參數傳遞到 G-code 檔案的絕對路徑，並且它"
"們可以經由讀取環境變數來存取 PrusaSlicer 設定檔之設定。"

#: src/libslic3r/PrintConfig.cpp:2532
msgid "Printer type"
msgstr "打印機類型"

#: src/libslic3r/PrintConfig.cpp:2533
msgid "Type of the printer."
msgstr "打印機的類型。"

#: src/libslic3r/PrintConfig.cpp:2538
msgid "Printer notes"
msgstr "打印機備註"

#: src/libslic3r/PrintConfig.cpp:2539
msgid "You can put your notes regarding the printer here."
msgstr "您可以在此處放置有關打印機的註釋。"

#: src/libslic3r/PrintConfig.cpp:2547
msgid "Printer vendor"
msgstr "打印機供應商"

#: src/libslic3r/PrintConfig.cpp:2548
msgid "Name of the printer vendor."
msgstr "打印機供應商的名稱。"

#: src/libslic3r/PrintConfig.cpp:2553
msgid "Printer variant"
msgstr "打印機型號"

#: src/libslic3r/PrintConfig.cpp:2554
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr "打印機變體的名稱。例如，打印機變體可以經由噴嘴直徑來區分。"

#: src/libslic3r/PrintConfig.cpp:2571
msgid "Raft contact Z distance"
msgstr "筏板接觸Z軸的距離"

#: src/libslic3r/PrintConfig.cpp:2573
msgid ""
"The vertical distance between object and raft. Ignored for soluble interface."
msgstr "模型和筏板之間的垂直距離。請忽略可溶性介面。"

#: src/libslic3r/PrintConfig.cpp:2580
msgid "Raft expansion"
msgstr "擴張筏板"

#: src/libslic3r/PrintConfig.cpp:2582
msgid "Expansion of the raft in XY plane for better stability."
msgstr "在 XY 平面中擴張筏板以獲得更好的穩定性。"

#: src/libslic3r/PrintConfig.cpp:2589
msgid "First layer density"
msgstr "第一層密度"

#: src/libslic3r/PrintConfig.cpp:2591
msgid "Density of the first raft or support layer."
msgstr "第一筏板或支撐層的密度。"

#: src/libslic3r/PrintConfig.cpp:2599
msgid "First layer expansion"
msgstr "第一層的擴張"

#: src/libslic3r/PrintConfig.cpp:2601
msgid ""
"Expansion of the first raft or support layer to improve adhesion to print "
"bed."
msgstr "擴張第一層或支撐層以提高對模型對載台的附著力。"

#: src/libslic3r/PrintConfig.cpp:2608
msgid "Raft layers"
msgstr "筏板打印層"

#: src/libslic3r/PrintConfig.cpp:2610
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr "該模型將按此層數升高，並在其下方生成支撐材料。"

#: src/libslic3r/PrintConfig.cpp:2618
msgid "Slice resolution"
msgstr "切片解析度"

#: src/libslic3r/PrintConfig.cpp:2619
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"最小細節解析度，用於簡化輸入檔案以加快切片作業並減少記憶體使用。超高解析度模"
"型通常包含比打印機算繪更多的細節。設定為零以禁用任何簡化並使用來自輸入的超高"
"解析度。"

#: src/libslic3r/PrintConfig.cpp:2629
msgid "G-code resolution"
msgstr "G-code 解析度"

#: src/libslic3r/PrintConfig.cpp:2630
msgid ""
"Maximum deviation of exported G-code paths from their full resolution "
"counterparts. Very high resolution G-code requires huge amount of RAM to "
"slice and preview, also a 3D printer may stutter not being able to process a "
"high resolution G-code in a timely manner. On the other hand, a low "
"resolution G-code will produce a low poly effect and because the G-code "
"reduction is performed at each layer independently, visible artifacts may be "
"produced."
msgstr ""
"匯出的 G-code 路徑與其超高解析度對應路徑的最大偏差。非常高解析度的 G-code 需"
"要大量的 RAM 來切片和預覽，而且 3D 打印機可能無法及時處理高解析度的 G-code 。"
"另一方面，低解析度的 G-code 會產生低多邊形效果，並且由於 G-code 減少是在每一"
"層獨立執行的，因此可能會產生可見的虛像。"

#: src/libslic3r/PrintConfig.cpp:2641
msgid "Minimum travel after retraction"
msgstr "回抽後的最小行程"

#: src/libslic3r/PrintConfig.cpp:2642
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr "當行程移動短於此長度時，不會觸發回抽。"

#: src/libslic3r/PrintConfig.cpp:2648
msgid "Retract amount before wipe"
msgstr "回擦前回抽量"

#: src/libslic3r/PrintConfig.cpp:2649
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""
"對於 Bowden 擠出機，在進行回擦運動之前進行一定量的快速回抽可能是明智的。"

#: src/libslic3r/PrintConfig.cpp:2656
msgid "Retract on layer change"
msgstr "撤回打印層的更改"

#: src/libslic3r/PrintConfig.cpp:2657
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "每當完成 Z 軸移動時，此標簽都會強制回抽。"

#: src/libslic3r/PrintConfig.cpp:2662
msgid "Retraction length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2663
msgid "Retraction Length"
msgstr "回抽長度"

#: src/libslic3r/PrintConfig.cpp:2664
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"當觸發回抽時，線材被拉回指定的量（長度是在原本線材進入擠出機之前測量的）。"

#: src/libslic3r/PrintConfig.cpp:2670
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2035
msgid "Length"
msgstr "長度"

#: src/libslic3r/PrintConfig.cpp:2671
msgid "Retraction Length (Toolchange)"
msgstr "回抽長度（更換工具時）"

#: src/libslic3r/PrintConfig.cpp:2672
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"當在更換工具之前觸發回抽時，線材將被拉回指定的長度（長度是在原始線材進入擠出"
"機之前測量的）。"

#: src/libslic3r/PrintConfig.cpp:2680
msgid "Ramping slope angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2681
msgid "Slope of the ramp in the initial phase of the travel."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2689
msgid "Use ramping lift"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2690
msgid ""
"Generates a ramping lift instead of lifting the extruder directly upwards. "
"The travel is split into two phases: the ramp and the standard horizontal "
"travel. This option helps reduce stringing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2697
msgid "Maximum ramping lift"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2698
msgid ""
"Maximum lift height of the ramping lift. It may not be reached if the next "
"position is close to the old one."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2707
msgid "Steeper ramp before obstacles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2708
msgid ""
"If enabled, PrusaSlicer detects obstacles along the travel path and makes "
"the slope steeper in case an obstacle might be hit during the initial phase "
"of the travel."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2714
msgid "High flow nozzle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2715
msgid "High flow nozzles allow higher print speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2720
msgid "Lift height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2721
msgid "Lift height applied before travel."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2729
msgid "Above Z"
msgstr "將 Z 軸上昇"

#: src/libslic3r/PrintConfig.cpp:2730
msgid "Only lift Z above"
msgstr "僅將 Z 軸往上昇起"

#: src/libslic3r/PrintConfig.cpp:2731
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"如果將此設定為正數，則 Z 軸上昇將只會出現在指定的 Z 軸。您可以調整此設定以跳"
"過第一層的昇高。"

#: src/libslic3r/PrintConfig.cpp:2738
msgid "Below Z"
msgstr "降低 Z 軸"

#: src/libslic3r/PrintConfig.cpp:2739
msgid "Only lift Z below"
msgstr "僅將 Z 軸往下降低"

#: src/libslic3r/PrintConfig.cpp:2740
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"如果將此設定為正數，則 Z 軸上昇將出現在指定的絕對 Z 軸下方。您可以調整此設定"
"將上昇限制在第一層。"

#: src/libslic3r/PrintConfig.cpp:2748
msgid "Deretraction extra length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2749
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"當行進移動後由回抽得到補償時，擠出機將推動額外長度的線材。不過很少需要做此設"
"定。"

#: src/libslic3r/PrintConfig.cpp:2756
msgid "Extra length on restart"
msgstr "重新啟動時的額外長度"

#: src/libslic3r/PrintConfig.cpp:2757
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr "當更換工具後補償回抽時，擠出機將推動這一額外長度的線材。"

#: src/libslic3r/PrintConfig.cpp:2764 src/libslic3r/PrintConfig.cpp:2765
msgid "Retraction Speed"
msgstr "回抽速度"

#: src/libslic3r/PrintConfig.cpp:2766
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "回抽速度（僅適用於擠出機馬達）。"

#: src/libslic3r/PrintConfig.cpp:2772 src/libslic3r/PrintConfig.cpp:2773
msgid "Deretraction Speed"
msgstr "擠回速度"

#: src/libslic3r/PrintConfig.cpp:2774
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"線材回抽後裝入擠出機的速度（僅適用於擠出機馬達）。如果保留為零，則使用回抽速"
"度。"

#: src/libslic3r/PrintConfig.cpp:2781
msgid "Seam gap distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2782
msgid ""
"The distance between the endpoints of a closed loop perimeter. Positive "
"values will shorten and interrupt the loop slightly to reduce the seam. "
"Negative values will extend the loop, causing the endpoints to overlap "
"slightly. When percents are used, the distance is derived from the nozzle "
"diameter. Set to zero to disable this feature."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2792
msgid "Seam position"
msgstr "接縫位置"

#: src/libslic3r/PrintConfig.cpp:2794
msgid "Position of perimeters starting points."
msgstr "邊緣起點的位置。"

#: src/libslic3r/PrintConfig.cpp:2796
#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:97
msgid "Random"
msgstr "隨機"

#: src/libslic3r/PrintConfig.cpp:2797
msgid "Nearest"
msgstr "最近的"

#: src/libslic3r/PrintConfig.cpp:2798
msgid "Aligned"
msgstr "對齊"

#: src/libslic3r/PrintConfig.cpp:2799 src/slic3r/GUI/MainFrame.cpp:1423
msgid "Rear"
msgstr "後面"

#: src/libslic3r/PrintConfig.cpp:2805
msgid "Staggered inner seams"
msgstr ""

#. TRN PrintSettings: "Staggered inner seams"
#: src/libslic3r/PrintConfig.cpp:2807
msgid ""
"This option causes the inner seams to be shifted backwards based on their "
"depth, forming a zigzag pattern."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2812
msgid "Scarf joint placement"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2814
msgid "Where to place scarf joint seam."
msgstr ""

#. TRN: Drop-down option for 'Scarf joint placement' parameter.
#: src/libslic3r/PrintConfig.cpp:2819
msgid "Nowhere"
msgstr ""

#. TRN: Drop-down option for 'Scarf joint placement' parameter.
#: src/libslic3r/PrintConfig.cpp:2821
msgid "Contours"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2822
#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:122
msgid "Everywhere"
msgstr "全部"

#: src/libslic3r/PrintConfig.cpp:2826
msgid "Scarf joint only on smooth perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2828
msgid "Only use the scarf joint when the perimeter is smooth."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2833
msgid "Scarf start height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2835
msgid ""
"Start height of the scarf joint specified as fraction of the current layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2843
msgid "Scarf joint around entire perimeter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2845
msgid "Extend the scarf around entire length of the perimeter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2850
msgid "Scarf joint length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2852
msgid "Length of the scarf joint."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2859
msgid "Max scarf joint segment length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2861
msgid "Maximum length of any scarf joint segment."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2868
msgid "Scarf joint on inner perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2870
msgid "Use scarf joint on inner perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2877
msgid "Direction"
msgstr "方向"

#: src/libslic3r/PrintConfig.cpp:2879
msgid "Preferred direction of the seam"
msgstr "接縫的預設方向"

#: src/libslic3r/PrintConfig.cpp:2880
msgid "Seam preferred direction"
msgstr "接縫預設方向"

#: src/libslic3r/PrintConfig.cpp:2887
msgid "Jitter"
msgstr "分佈角度"

#: src/libslic3r/PrintConfig.cpp:2889
msgid "Seam preferred direction jitter"
msgstr "接縫預設的的分佈方向"

#: src/libslic3r/PrintConfig.cpp:2890
msgid "Preferred direction of the seam - jitter"
msgstr "接縫的預設方向 - 分佈"

#: src/libslic3r/PrintConfig.cpp:2897
msgid "Distance from brim/object"
msgstr "與帽邊/模型的距離"

#: src/libslic3r/PrintConfig.cpp:2898
msgid ""
"Distance between skirt and brim (when draft shield is not used) or objects."
msgstr "裙邊與帽邊（在沒有使用防風罩時）或模型之間的距離。"

#: src/libslic3r/PrintConfig.cpp:2904
msgid "Skirt height"
msgstr "裙邊高度"

#: src/libslic3r/PrintConfig.cpp:2905
msgid "Height of skirt expressed in layers."
msgstr "裙邊的高度以層數表示。"

#: src/libslic3r/PrintConfig.cpp:2911
msgid "Draft shield"
msgstr "防風罩"

#: src/libslic3r/PrintConfig.cpp:2912
msgid ""
"With draft shield active, the skirt will be printed skirt_distance from the "
"object, possibly intersecting brim.\n"
"Enabled = skirt is as tall as the highest printed object.\n"
"Limited = skirt is as tall as specified by skirt_height.\n"
"This is useful to protect an ABS or ASA print from warping and detaching "
"from print bed due to wind draft."
msgstr ""
"在防風罩啟用的情況下，裙邊將被打印為距離模型 skirt_distance，這可能會與邊緣相"
"交。\n"
"啟用 = 裙邊與最高的打印模型一樣高。\n"
"限制 = 裙邊與 skirt_height 指定的一樣高。\n"
"這有助於防止 ABS 或 ASA 這類材質的打印件因風力的冷卻而翹曲和從載台上分開。"

#: src/libslic3r/PrintConfig.cpp:2918
msgid "Limited"
msgstr "有限"

#: src/libslic3r/PrintConfig.cpp:2925
msgid "Loops (minimum)"
msgstr "循環（最小）"

#: src/libslic3r/PrintConfig.cpp:2926
msgid "Skirt Loops"
msgstr "裙邊循環"

#: src/libslic3r/PrintConfig.cpp:2927
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"外圍的圈數.如果設定了最小擠出長度，/,那麼圈數必須比這裏設定的值要大。設為0則"
"完全停用外圍."

#: src/libslic3r/PrintConfig.cpp:2935
msgid "Slow down if layer print time is below"
msgstr "如果單層打印時間低於這個設定值則降低速度"

#: src/libslic3r/PrintConfig.cpp:2936
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"如果單層打印時間估計低於此秒數，打印移動速度將按比例降低以將持續的時間延長至"
"此設定值。"

#: src/libslic3r/PrintConfig.cpp:2945
msgid "Small perimeters"
msgstr "最小邊緣"

#: src/libslic3r/PrintConfig.cpp:2947
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"這個設定將影響半徑 <= 6.5mm（通常是孔）的邊緣之速度。如果以百分比表示（例如："
"80%），它將根據上面的邊緣速度之設定進行計算。設為零時表示自動設定。"

#: src/libslic3r/PrintConfig.cpp:2957
msgid "Solid infill threshold area"
msgstr "實心填充上限區域"

#: src/libslic3r/PrintConfig.cpp:2959
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr "為面積小於指定上限的區域強制作實體填充。"

#: src/libslic3r/PrintConfig.cpp:2960
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:2966
msgid "Solid infill extruder"
msgstr "實體填充擠出機"

#: src/libslic3r/PrintConfig.cpp:2968
msgid "The extruder to use when printing solid infill."
msgstr "打印實體填充時使用的擠出機。"

#: src/libslic3r/PrintConfig.cpp:2974 src/libslic3r/PrintConfig.cpp:3784
msgid "Solid infill every"
msgstr "實體填充每一個"

#: src/libslic3r/PrintConfig.cpp:2976 src/libslic3r/PrintConfig.cpp:3786
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"此功能允許在每個指定的層數上強制一個實體層。設為零表示禁用。您可以將其設定為"
"任意值（例如 9999）； PrusaSlicer 會根據噴嘴直徑和層高自動選擇最大可能的層數"
"進行組合。"

#: src/libslic3r/PrintConfig.cpp:2988
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"將此設定為非零值以設定實體表面填充的手動擠出寬度。如果保留為零，將使用預設擠"
"出寬度（如果已有設定的話），否則將使用 1.125 x 噴嘴直徑。如果以百分比（例如 "
"90%）表示，它將以層高的百分比做計算。"

#: src/libslic3r/PrintConfig.cpp:3000
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"打印實體區域（頂部/底部/內部水平殼）的速度。這可以表示為超過上述預設填充速度"
"的百分比（例如：80%）。設為零表示自動設定。"

#: src/libslic3r/PrintConfig.cpp:3011 src/slic3r/GUI/Tab.cpp:1439
msgid "Solid layers"
msgstr "實體層"

#: src/libslic3r/PrintConfig.cpp:3012
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "在頂面和底面生成的實體層數。"

#: src/libslic3r/PrintConfig.cpp:3018 src/libslic3r/PrintConfig.cpp:3019
msgid "Minimum thickness of a top / bottom shell"
msgstr "頂殼/底殼的最小厚度"

#: src/libslic3r/PrintConfig.cpp:3025
msgid "Spiral vase"
msgstr "螺旋花瓶打印模式"

#: src/libslic3r/PrintConfig.cpp:3026
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""
"此功能是在打印單面薄壁模型時逐漸升高 Z 軸，這樣可以去除任何可見的接縫。此選項"
"需要有單一邊緣、沒有填充、無頂部實體層和無支撐材料。您仍然可以設定任意數量的"
"底部純色層以及裙邊/帽邊。當打印多個模型時，這個設定將沒有作用。"

#: src/libslic3r/PrintConfig.cpp:3034
msgid "Temperature variation"
msgstr "溫度變化"

#. TRN PrintSettings : "Ooze prevention" > "Temperature variation"
#: src/libslic3r/PrintConfig.cpp:3036
msgid ""
"Temperature difference to be applied when an extruder is not active. The "
"value is not used when 'idle_temperature' in filament settings is defined."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3046
msgid "Emit temperature commands automatically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3047
msgid ""
"When enabled, PrusaSlicer will check whether your custom Start G-Code "
"contains G-codes to set extruder, bed or chamber temperature (M104, M109, "
"M140, M190, M141 and M191). If so, the temperatures will not be emitted "
"automatically so you're free to customize the order of heating commands and "
"other custom actions. Note that you can use placeholder variables for all "
"PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" "
"command wherever you want.\n"
"If your custom Start G-Code does NOT contain these G-codes, PrusaSlicer will "
"execute the Start G-Code after heated chamber was set to its temperature, "
"bed reached its target temperature and extruder just started heating.\n"
"\n"
"When disabled, PrusaSlicer will NOT emit commands to heat up extruder, bed "
"or chamber, leaving all to Custom Start G-Code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3063
msgid ""
"This start procedure is inserted at the beginning, possibly prepended by "
"temperature-changing commands. See 'autoemit_temperature_commands'."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3073
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""
"這個程序在開始啟動時插入，在任何打印機啟動 gcode 之後（在多材料打印機的情況"
"下，在對該線材進行任何工具更改之後）。這用於覆寫特定線材的設定。如果 "
"PrusaSlicer 在您的自定義代碼中檢測到 M104、M109、M140 或 M190，這些命令將不會"
"自動添加到前面，因此您可以自由自定義加熱命令和其他自定義操作的順序。請注意，"
"您可以為所有 PrusaSlicer 設定使用佔位符號變數，也因此您可以在任何需要的地方放"
"置“M109 S[first_layer_temperature]”這個命令。若您有多個擠出機，則 gcode 按擠"
"出機順序處理。"

#: src/libslic3r/PrintConfig.cpp:3089
msgid "Color change G-code"
msgstr "顏色變更 G-code"

#: src/libslic3r/PrintConfig.cpp:3090
msgid "This G-code will be used as a code for the color change"
msgstr "此 G-code將用作顏色更改的代碼"

#: src/libslic3r/PrintConfig.cpp:3099
msgid "This G-code will be used as a code for the pause print"
msgstr "此 G-code碼將用作暫停打印的代碼"

#: src/libslic3r/PrintConfig.cpp:3108
msgid "This G-code will be used as a custom code"
msgstr "此 G-code將用作自定義代碼"

#: src/libslic3r/PrintConfig.cpp:3116
msgid "Single Extruder Multi Material"
msgstr "單擠出機多材料"

#: src/libslic3r/PrintConfig.cpp:3117
msgid "The printer multiplexes filaments into a single hot end."
msgstr "打印機將線材多路回復到單個加熱頭。"

#: src/libslic3r/PrintConfig.cpp:3122
msgid "Prime all printing extruders"
msgstr "所有的擠出機"

#: src/libslic3r/PrintConfig.cpp:3123
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr "如果啟用這個項目,則所有擠出機都將在打印開始時在載台的前緣進行打底。"

#: src/libslic3r/PrintConfig.cpp:3128
msgid "No sparse layers (EXPERIMENTAL)"
msgstr "沒有稀疏層（實驗）"

#: src/libslic3r/PrintConfig.cpp:3129
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""
"如果啟用此選項，則擦拭塔將不會打印在沒有工具變化的層上。而在更換工具的層上"
"時，擠出機將向下移動以打印擦拭塔。使用者有責任確保噴嘴不與打印的模型發生碰"
"撞。"

#: src/libslic3r/PrintConfig.cpp:3136
msgid "Slice gap closing radius"
msgstr "切片間隙閉合半徑"

#: src/libslic3r/PrintConfig.cpp:3138
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"低於 2 倍間隙閉合半徑的裂縫在三角形網格切片期間被填充。間隙閉合的操作可能會降"
"低最終的打印的解析度，因此建議將該值保持在最低的合理值。"

#: src/libslic3r/PrintConfig.cpp:3146
msgid "Slicing Mode"
msgstr "切片模式"

#: src/libslic3r/PrintConfig.cpp:3148
msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""
"對 3DLabPrint 飛機模型使用“奇數/偶數”。使用“封閉孔”以關閉模型中的所有孔。"

#: src/libslic3r/PrintConfig.cpp:3150
msgid "Regular"
msgstr "定期"

#: src/libslic3r/PrintConfig.cpp:3151
msgid "Even-odd"
msgstr "奇數-偶數"

#: src/libslic3r/PrintConfig.cpp:3152
msgid "Close holes"
msgstr "封閉孔"

#: src/libslic3r/PrintConfig.cpp:3158
msgid "Generate support material"
msgstr "使用支撐材料"

#: src/libslic3r/PrintConfig.cpp:3160
msgid "Enable support material generation."
msgstr "啟用製作支撐的材料。"

#: src/libslic3r/PrintConfig.cpp:3164
msgid "Auto generated supports"
msgstr "自動建立支撐"

#: src/libslic3r/PrintConfig.cpp:3166
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"如果選用這個項目，將根據懸空設定的上限自動建立支撐。如果未選用，則將使用“支撐"
"執行者”設定值產生支撐。"

#: src/libslic3r/PrintConfig.cpp:3172
msgid "XY separation between an object and its support"
msgstr "模型及其支撐之間 XY 方向距離"

#: src/libslic3r/PrintConfig.cpp:3174
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"模型及其支撐之間 XY 方向之距離。如果以百分比表示（例如 50%），則按照邊緣寬度"
"的百分比計算。"

#: src/libslic3r/PrintConfig.cpp:3185
msgid "Pattern angle"
msgstr "花紋角度"

#: src/libslic3r/PrintConfig.cpp:3187
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "使用此設定可在水平面上旋轉支撐材料的花紋。"

#: src/libslic3r/PrintConfig.cpp:3195 src/libslic3r/PrintConfig.cpp:4087
#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:120
msgid "Support on build plate only"
msgstr "僅從載台建立支撐"

#: src/libslic3r/PrintConfig.cpp:3197 src/libslic3r/PrintConfig.cpp:4089
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr "只在載台上面才建立支撐，不要在打印件上建立支撐。"

#: src/libslic3r/PrintConfig.cpp:3202
msgid "Top contact Z distance"
msgstr "頂部接觸 Z 方向的距離"

#: src/libslic3r/PrintConfig.cpp:3204
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"模型與支撐材料介面之間的垂直距離。將此設定為 0 也將會阻止 PrusaSlicer 對第一"
"個模型層使用橋接流量和速度。"

#: src/libslic3r/PrintConfig.cpp:3210
msgid "0 (soluble)"
msgstr "0（可溶性材料）"

#: src/libslic3r/PrintConfig.cpp:3211
msgid "0.1 (detachable)"
msgstr "0.1（可拆除材料）"

#: src/libslic3r/PrintConfig.cpp:3212
msgid "0.2 (detachable)"
msgstr "0.2（可拆除材料）"

#: src/libslic3r/PrintConfig.cpp:3218
msgid "Bottom contact Z distance"
msgstr "底部接觸 Z 方向的距離"

#: src/libslic3r/PrintConfig.cpp:3220
msgid ""
"The vertical distance between the object top surface and the support "
"material interface. If set to zero, support_material_contact_distance will "
"be used for both top and bottom contact Z distances."
msgstr ""
"模型頂面與支撐材料介面之間的垂直距離。如果設定為零，"
"support_material_contact_distance 將用於頂部和底部接觸的 Z 方向距離。"

#. TRN Print Settings: "Bottom contact Z distance". Have to be as short as possible
#. TRN Print Settings: "Bottom interface layers". Have to be as short as possible
#: src/libslic3r/PrintConfig.cpp:3226 src/libslic3r/PrintConfig.cpp:3307
msgid "Same as top"
msgstr "與頂部相同"

#: src/libslic3r/PrintConfig.cpp:3234
msgid "Enforce support for the first"
msgstr "強制支撐前面"

#: src/libslic3r/PrintConfig.cpp:3236
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"由底部計算的指定層數來建立支撐材料，無論是否啟用正常支撐材料，也無論角度上"
"限。這對於在載台上具有非常薄或面積比較小之模型獲得更多的附著力很有用。"

#: src/libslic3r/PrintConfig.cpp:3241
msgid "Enforce support for the first n layers"
msgstr "強制支撐前 n 層"

#: src/libslic3r/PrintConfig.cpp:3247
msgid "Support material/raft/skirt extruder"
msgstr "支撑材料/棧板/邊緣擠出機"

#: src/libslic3r/PrintConfig.cpp:3249
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"打印支撐材料、底座和邊緣時使用的擠出機 (1+, 0 使用當前擠出機以最大限度的減少"
"工具切換)。"

#: src/libslic3r/PrintConfig.cpp:3258
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"將此設為非零值以設定支撐材料的手動擠出寬度。如果保留為零，則將使用預設擠出寬"
"度（如果已設定的話），否則將直接使用噴嘴直徑的設定。若以百分比（例如 90%）表"
"示，它將根據層高的百分比計算。"

#: src/libslic3r/PrintConfig.cpp:3268
msgid "Interface loops"
msgstr "介面循環圈"

#: src/libslic3r/PrintConfig.cpp:3270
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr "以打印圈覆蓋支撐的頂部接觸層。預設情況下禁用。"

#: src/libslic3r/PrintConfig.cpp:3275
msgid "Support material/raft interface extruder"
msgstr "支撐材料/筏板介面擠出機"

#: src/libslic3r/PrintConfig.cpp:3277
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"打印支撐材料與支撐介面時使用的擠出機（1+，0 使用當前擠出機以減少工具更換"
"數）。這也會影響到筏板。"

#: src/libslic3r/PrintConfig.cpp:3284
msgid "Top interface layers"
msgstr "頂層介面層"

#: src/libslic3r/PrintConfig.cpp:3286
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr "在模型和支撐材料之間插入的介面層數。"

#: src/libslic3r/PrintConfig.cpp:3290 src/libslic3r/PrintConfig.cpp:3308
msgid "0 (off)"
msgstr "0 (無)"

#: src/libslic3r/PrintConfig.cpp:3291 src/libslic3r/PrintConfig.cpp:3309
msgid "1 (light)"
msgstr "1 (輕薄)"

#: src/libslic3r/PrintConfig.cpp:3292 src/libslic3r/PrintConfig.cpp:3310
msgid "2 (default)"
msgstr "2 (預設)"

#: src/libslic3r/PrintConfig.cpp:3293 src/libslic3r/PrintConfig.cpp:3311
msgid "3 (heavy)"
msgstr "3 (厚重)"

#: src/libslic3r/PrintConfig.cpp:3299
msgid "Bottom interface layers"
msgstr "底部介面層"

#: src/libslic3r/PrintConfig.cpp:3301
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material. Set to -1 to use support_material_interface_layers"
msgstr ""
"在模型和支撐材料之間插入的介面層數。設定為 -1 以使用 "
"support_material_interface_layers"

#: src/libslic3r/PrintConfig.cpp:3317
msgid "Closing radius"
msgstr "封閉半徑"

#: src/libslic3r/PrintConfig.cpp:3319
msgid ""
"For snug supports, the support regions will be merged using morphological "
"closing operation. Gaps smaller than the closing radius will be filled in."
msgstr ""
"用於緊貼支撐，支撐區域將使用封閉的形態來進行合併。小於封閉半徑的間隙將會被填"
"充。"

#: src/libslic3r/PrintConfig.cpp:3327
msgid "Interface pattern spacing"
msgstr "介面花紋間距"

#: src/libslic3r/PrintConfig.cpp:3329
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr "支撐介面線與線之間的距離。設定為零以獲得可靠的支撐介面。"

#: src/libslic3r/PrintConfig.cpp:3338
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"打印支撐材料介面層的速度。如果以百分比（例如 50%）表示，它將根據支撐材料打印"
"速度進行計算。"

#: src/libslic3r/PrintConfig.cpp:3347
msgid "Pattern"
msgstr "花紋"

#: src/libslic3r/PrintConfig.cpp:3349
msgid "Pattern used to generate support material."
msgstr "用於生成支撐材料的花紋。"

#: src/libslic3r/PrintConfig.cpp:3352
msgid "Rectilinear grid"
msgstr "直線網格"

#: src/libslic3r/PrintConfig.cpp:3359
msgid "Interface pattern"
msgstr "介面花紋"

#: src/libslic3r/PrintConfig.cpp:3361
msgid ""
"Pattern used to generate support material interface. Default pattern for non-"
"soluble support interface is Rectilinear, while default pattern for soluble "
"support interface is Concentric."
msgstr ""
"用於生成支撐材料介面的花紋。不可溶支撐介面的預設模式是直線，而可溶支撐介面的"
"預設模式是同心。"

#: src/libslic3r/PrintConfig.cpp:3373
msgid "Pattern spacing"
msgstr "花紋間距"

#: src/libslic3r/PrintConfig.cpp:3375
msgid "Spacing between support material lines."
msgstr "支撐材料線之間的間距。"

#: src/libslic3r/PrintConfig.cpp:3384
msgid "Speed for printing support material."
msgstr "打印支撐材料的速度。"

#: src/libslic3r/PrintConfig.cpp:3391 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:240
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2276
msgid "Style"
msgstr "樣式"

#: src/libslic3r/PrintConfig.cpp:3393
msgid ""
"Style and shape of the support towers. Projecting the supports into a "
"regular grid will create more stable supports, while snug support towers "
"will save material and reduce object scarring."
msgstr ""
"支撐塔的樣式和形狀。將支撐投影成有規律的網格將會建立更穩定的支撐，而合適的支"
"撐塔將節省材料並減少在模型上產生疤痕。"

#: src/libslic3r/PrintConfig.cpp:3398
msgid "Snug"
msgstr "合適的"

#: src/libslic3r/PrintConfig.cpp:3399
msgid "Organic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3405
msgid "Synchronize with object layers"
msgstr "與模型打印層同步"

#. TRN PrintSettings : "Synchronize with object layers"
#: src/libslic3r/PrintConfig.cpp:3408
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive. This option "
"is only available when top contact Z distance is set to zero."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3415
msgid "Overhang threshold"
msgstr "懸空上限"

#: src/libslic3r/PrintConfig.cpp:3417
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"設定這個來限制傾斜角度（90° = 垂直）超過指定上限的懸空才產生支撐。換句話說，"
"這個設定值表示您可以在沒有支撐材料的情況下打印的最大水平斜率（從水平面測"
"量）。設定為零可以進行自動檢測（推薦）。"

#: src/libslic3r/PrintConfig.cpp:3429
msgid "With sheath around the support"
msgstr "在支撐周圍產生護套"

#: src/libslic3r/PrintConfig.cpp:3431
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"在支撐周圍添加護套（單圈線）。這可讓支撐更加可靠，但也會因此更難以移除。"

#: src/libslic3r/PrintConfig.cpp:3437
msgid "Maximum Branch Angle"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Maximum Branch Angle"
#: src/libslic3r/PrintConfig.cpp:3440
msgid ""
"The maximum angle of the branches, when the branches have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle to be able to have more reach."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3449
msgid "Preferred Branch Angle"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle"
#: src/libslic3r/PrintConfig.cpp:3452
msgid ""
"The preferred angle of the branches, when they do not have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle for branches to merge faster."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3461
msgid "Tip Diameter"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Tip Diameter"
#: src/libslic3r/PrintConfig.cpp:3464
msgid "Branch tip diameter for organic supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3472
msgid "Branch Diameter"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
#: src/libslic3r/PrintConfig.cpp:3475
msgid ""
"The diameter of the thinnest branches of organic support. Thicker branches "
"are more sturdy. Branches towards the base will be thicker than this."
msgstr ""

#. TRN PrintSettings: #lmFIXME
#: src/libslic3r/PrintConfig.cpp:3485
msgid "Branch Diameter Angle"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
#: src/libslic3r/PrintConfig.cpp:3488
msgid ""
"The angle of the branches' diameter as they gradually become thicker towards "
"the bottom. An angle of 0 will cause the branches to have uniform thickness "
"over their length. A bit of an angle can increase stability of the organic "
"support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3498
msgid "Branch Diameter with double walls"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
#: src/libslic3r/PrintConfig.cpp:3501
msgid ""
"Branches with area larger than the area of a circle of this diameter will be "
"printed with double walls for stability. Set this value to zero for no "
"double walls."
msgstr ""

#. TRN PrintSettings: #lmFIXME
#: src/libslic3r/PrintConfig.cpp:3514
msgid "Branch Distance"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Distance"
#: src/libslic3r/PrintConfig.cpp:3517
msgid ""
"How far apart the branches need to be when they touch the model. Making this "
"distance small will cause the tree support to touch the model at more "
"points, causing better overhang but making support harder to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3524
msgid "Branch Density"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Density"
#: src/libslic3r/PrintConfig.cpp:3527
msgid ""
"Adjusts the density of the support structure used to generate the tips of "
"the branches. A higher value results in better overhangs but the supports "
"are harder to remove, thus it is recommended to enable top support "
"interfaces instead of a high branch density value if dense interfaces are "
"needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3539
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""
"第一層之後的打印層之噴嘴溫度。將此設定為零以禁用輸出 G-code 中的溫度控制命"
"令。"

#: src/libslic3r/PrintConfig.cpp:3542
msgid "Nozzle temperature"
msgstr "噴嘴溫度"

#: src/libslic3r/PrintConfig.cpp:3548
msgid "Thick bridges"
msgstr "橋接厚度"

#: src/libslic3r/PrintConfig.cpp:3550
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""
"若啟用此選項，能讓橋接更可靠，可連接更遠的距離，但看起來可能更糟。禁用這個的"
"話，網接看起來更好，但對較短的橋接距離效果比較好。"

#: src/libslic3r/PrintConfig.cpp:3556
msgid "Detect thin walls"
msgstr "檢測薄壁"

#: src/libslic3r/PrintConfig.cpp:3558
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""
"檢測單線寬的牆面（若是無法容納兩條擠出線的零件，我們需要先將它們合併成一條打"
"印軌跡）。"

#: src/libslic3r/PrintConfig.cpp:3565
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
"and {next_extruder} can be used. When a tool-changing command which changes "
"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""
"此自定義代碼在每次切換工具之前插入。可以使用所有 PrusaSlicer 設定的佔位符號變"
"數以及 {toolchange_z}、{previous_extruder} 和 {next_extruder}。當包含更改為正"
"確擠出機的更換工具命令（例如 T{next_extruder}）時，PrusaSlicer 將不會再發出此"
"類命令。因此可以在工具更改之前和之後編寫自定義行為腳本。"

#: src/libslic3r/PrintConfig.cpp:3578
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"將此設定為非零值以設定頂部表面填充的手動擠出寬度。您可能希望使用更薄的擠出物"
"來填充所有狹窄區域並獲得更光滑的表面。如果保留為零，則將預設為使用擠出寬度之"
"設定（如果已設定），否則將使用噴嘴直徑。如果以百分比（例如 90%）表示，它將根"
"據層高的百分比來計算。"

#: src/libslic3r/PrintConfig.cpp:3591
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"打印頂部實體層的速度（它僅適用於最上面的外部層，而不適用於它們的內部實體"
"層）。您可能想放慢速度以獲得更好的表面光滑度。這可以表示為超過上述實體填充速"
"度的百分比（例如：80%）。零表示自動設定。"

#. TRN Print Settings: "Top solid layers"
#: src/libslic3r/PrintConfig.cpp:3604 src/libslic3r/PrintConfig.cpp:3612
msgctxt "Layers"
msgid "Top"
msgstr "頂部"

#: src/libslic3r/PrintConfig.cpp:3606
msgid "Number of solid layers to generate on top surfaces."
msgstr "在頂面上生成的實體層數量。"

#: src/libslic3r/PrintConfig.cpp:3607
msgid "Top solid layers"
msgstr "頂面層實體層"

#: src/libslic3r/PrintConfig.cpp:3614
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""
"如有必要的話，頂部實體層的數量會增加到 top_solid_layers 以上，以滿足頂部殼的"
"最小厚度。這有助於在使用可變層高打印時防止出現枕頭效應。"

#: src/libslic3r/PrintConfig.cpp:3617
msgid "Minimum top shell thickness"
msgstr "最小頂殼厚度"

#: src/libslic3r/PrintConfig.cpp:3624
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "移動速度（在兩個擠壓點距離之間移動的速度）。"

#: src/libslic3r/PrintConfig.cpp:3632
msgid "Z travel"
msgstr "Z 軸方向的移動"

#: src/libslic3r/PrintConfig.cpp:3633
msgid ""
"Speed for movements along the Z axis.\n"
"When set to zero, the value is ignored and regular travel speed is used "
"instead."
msgstr ""
"沿 Z 軸方向移動的速度。\n"
"當設定為零時，其它的指定值將被忽略並使用正常的移動速度。"

#: src/libslic3r/PrintConfig.cpp:3641
msgid "Use firmware retraction"
msgstr "使用韌體回抽"

#: src/libslic3r/PrintConfig.cpp:3642
msgid ""
"This setting uses G10 and G11 commands to have the firmware handle the "
"retraction. Note that this has to be supported by firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3648
msgid "Use relative E distances"
msgstr "使用相對於 E 方向的距離"

#: src/libslic3r/PrintConfig.cpp:3649
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""
"如果您的韌體需要相對的 E 方向值，請勾選此項，否則就不要勾選。因為大多數韌體是"
"使用絕對值。"

#: src/libslic3r/PrintConfig.cpp:3655
msgid "Use volumetric E"
msgstr "使用體積的 E 值"

#: src/libslic3r/PrintConfig.cpp:3656
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"這個試驗參數是在 E 值中使用立方公尺爲單位而不是使用公分為單位。如果韌體不知道"
"線線直徑，你可以在起始 G-code 中輸入如 'M200 D[filament_diameter_0] T0' 以開"
"啓體積 E 值模式，並使用在PrusaSlicer 中已選用的線材直徑。這功能只有在最新版 "
"Marlin 中才支援。"

#: src/libslic3r/PrintConfig.cpp:3666
msgid "Enable variable layer height feature"
msgstr "啟用可變層高功能"

#: src/libslic3r/PrintConfig.cpp:3667
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr "某些打印機或打印機設定可能難以使用可變層高來進行打印。預設是啟用。"

#: src/libslic3r/PrintConfig.cpp:3673
msgid "Prefer clockwise movements"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3674
msgid ""
"This setting makes the printer print loops clockwise instead of "
"counterclockwise."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3679
msgid "Wipe while retracting"
msgstr "回抽時也同時進行回擦"

#: src/libslic3r/PrintConfig.cpp:3680
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""
"這個項目功能是在回抽的當下同時移動噴嘴將餘料擦除，以最大限度地減少從噴頭洩漏"
"的餘料造成表面上出現的斑點。"

#: src/libslic3r/PrintConfig.cpp:3687
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"多材料打印機可能需要在更換工具時注入或清潔擠出機。這會將多餘的材料擠出到擦拭"
"塔中。"

#: src/libslic3r/PrintConfig.cpp:3693
msgid "Purging volumes - matrix"
msgstr "清潔量 - 矩陣模式"

#: src/libslic3r/PrintConfig.cpp:3694
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""
"這個矩陣描述了以任何指定的工具於新線材在擦拭塔上清潔時所需耗費的體積（以立方"
"公釐為單位）。"

#: src/libslic3r/PrintConfig.cpp:3708 src/slic3r/GUI/GCodeViewer.cpp:490
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:246
msgid "Width"
msgstr "寬度"

#: src/libslic3r/PrintConfig.cpp:3709
msgid "Width of a wipe tower"
msgstr "擦拭塔寬度"

#: src/libslic3r/PrintConfig.cpp:3715 src/libslic3r/PrintConfig.cpp:3716
msgid "Wipe tower brim width"
msgstr "擦拭塔帽邊寬度"

#: src/libslic3r/PrintConfig.cpp:3723
msgid "Stabilization cone apex angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3724
msgid ""
"Angle at the apex of the cone that is used to stabilize the wipe tower. "
"Larger angle means wider base."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3733
msgid "Wipe tower purge lines spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3734
msgid "Spacing of purge lines on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3742
msgid "Extra flow for purging"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3743
msgid ""
"Extra flow used for the purging lines on the wipe tower. This makes the "
"purging lines thicker or narrower than they normally would be. The spacing "
"is adjusted automatically."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3752 src/libslic3r/PrintConfig.cpp:3760
#: src/slic3r/GUI/GUI_Factories.cpp:92 src/slic3r/GUI/GUI_Factories.cpp:168
msgid "Wipe options"
msgstr "擦拭選項"

#: src/libslic3r/PrintConfig.cpp:3753
msgid "Wipe into this object's infill"
msgstr "擦拭塔模型的填充"

#: src/libslic3r/PrintConfig.cpp:3754
msgid ""
"Purging after toolchange will be done inside this object's infills. This "
"lowers the amount of waste but may result in longer print time  due to "
"additional travel moves."
msgstr ""
"更換工具後的清潔將在此模型的填充內完成。這可減少線材浪費的長度，但也會因為額"
"外的移動導致打印時間變得更長。"

#: src/libslic3r/PrintConfig.cpp:3761
msgid "Wipe into this object"
msgstr "將要清潔的線材擦入此模型內"

#: src/libslic3r/PrintConfig.cpp:3762
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"將此模型用在更換工具後的清潔噴嘴動作以節省材料，以節省用在擦拭塔中浪費的材料"
"來減少打印時間。不過這樣的結果是模型的顏色可能被混合。"

#: src/libslic3r/PrintConfig.cpp:3768
msgid "Maximal bridging distance"
msgstr "最大橋接距離"

#: src/libslic3r/PrintConfig.cpp:3769
msgid "Maximal distance between supports on sparse infill sections."
msgstr "稀疏填充支撐之間的最大距離。"

#: src/libslic3r/PrintConfig.cpp:3775
msgid "Wipe tower extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3777
msgid ""
"The extruder to use when printing perimeter of the wipe tower. Set to 0 to "
"use the one that is available (non-soluble would be preferred)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3796
msgid "XY Size Compensation"
msgstr "XY 軸方向的尺寸補償"

#: src/libslic3r/PrintConfig.cpp:3798
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"將模型在 XY 方向的平面中按設定值擴張/收縮（負數 = 向內，正數 = 向外）。這可能"
"對微調打印孔的尺寸有幫助。"

#: src/libslic3r/PrintConfig.cpp:3806
msgid "Z offset"
msgstr "Z 軸方向的偏移量"

#: src/libslic3r/PrintConfig.cpp:3807
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"這個設定值將會由輸出 G-code 中所有的 Z 坐標中添加（或減去）。這功能是用於補償"
"錯誤的 Z 軸方向限位器位置，例如若您 機器上限位器的零點位置實際上讓噴嘴距離載"
"台 0.3 mm，則請將其設定為 -0.3（或修正您機器限位器的位置）。"

#: src/libslic3r/PrintConfig.cpp:3816
msgid "Perimeter generator"
msgstr "邊緣產生器類型"

#: src/libslic3r/PrintConfig.cpp:3818
msgid ""
"Classic perimeter generator produces perimeters with constant extrusion "
"width and for very thin areas is used gap-fill. Arachne engine produces "
"perimeters with variable extrusion width. This setting also affects the "
"Concentric infill."
msgstr ""
"傳統模式的邊緣產生器在進行邊緣擠壓時使用恆定寬度的邊緣，並且在非常薄的區域會"
"使用間隙填充。而蜘蛛模式邊緣產生器則會在擠出邊緣時生成具有可變擠出寬度的邊"
"緣。此設定會影響同心方式的填充。"

#: src/libslic3r/PrintConfig.cpp:3823
msgid "Classic"
msgstr "傳統模式"

#: src/libslic3r/PrintConfig.cpp:3824
msgid "Arachne"
msgstr "蜘蛛模式"

#: src/libslic3r/PrintConfig.cpp:3830
msgid "Perimeter transition length"
msgstr "邊緣過渡的長度"

#: src/libslic3r/PrintConfig.cpp:3832
msgid ""
"When transitioning between different numbers of perimeters as the part "
"becomes thinner, a certain amount of space is allotted to split or join the "
"perimeter segments. If expressed as a percentage (for example 100%), it will "
"be computed based on the nozzle diameter."
msgstr ""
"隨著零件變薄，在不同數量的邊緣之間過渡時，會分配一定量的空間來拆開或連成一"
"段。如果以百分比表示（例如 100%），則將根據噴嘴直徑的百分比做計算。"

#: src/libslic3r/PrintConfig.cpp:3841
msgid "Perimeter transitioning filter margin"
msgstr "邊緣過渡過濾器的餘量"

#: src/libslic3r/PrintConfig.cpp:3843
msgid ""
"Prevent transitioning back and forth between one extra perimeter and one "
"less. This margin extends the range of extrusion widths which follow to "
"[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. "
"Increasing this margin reduces the number of transitions, which reduces the "
"number of extrusion starts/stops and travel time. However, large extrusion "
"width variation can lead to under- or overextrusion problems. If expressed "
"as a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""
"防止在多一圈和少一圈之間來回轉換。這個邊距延展了擠壓寬度的範圍，該範圍依據 "
"[最小邊緣寬度 - 邊距，2 * 最小邊緣寬度 + 邊距]。增加這個餘量可減少轉換的次"
"數，從而減少擠出機開始/停止的次數和行進時間。然而較大的擠出寬度變化會導致擠出"
"不足或過量擠出的問題。如果以百分比表示（例如 25%），則將根據噴嘴直徑之百分比"
"計算。"

#: src/libslic3r/PrintConfig.cpp:3856
msgid "Perimeter transitioning threshold angle"
msgstr "邊緣過渡角度上限值"

#: src/libslic3r/PrintConfig.cpp:3858
msgid ""
"When to create transitions between even and odd numbers of perimeters. A "
"wedge shape with an angle greater than this setting will not have "
"transitions and no perimeters will be printed in the center to fill the "
"remaining space. Reducing this setting reduces the number and length of "
"these center perimeters, but may leave gaps or overextrude."
msgstr ""
"何時在偶數和奇數邊緣之間過渡建立。角度大於此設定的楔形不會有過渡，也不會在中"
"心打印邊緣來填充剩餘空間。減少此設定會減少這些中心邊緣的數量和長度，但可能會"
"留下間隙或過度的擠出。"

#: src/libslic3r/PrintConfig.cpp:3869
msgid "Perimeter distribution count"
msgstr "邊緣分佈計算"

#: src/libslic3r/PrintConfig.cpp:3871
msgid ""
"The number of perimeters, counted from the center, over which the variation "
"needs to be spread. Lower values mean that the outer perimeters don't change "
"in width."
msgstr ""
"邊緣的數量，從中心開始計算，需要在其上散佈變化。較低的值表示外邊緣的寬度不"
"變。"

#: src/libslic3r/PrintConfig.cpp:3878
msgid "Minimum feature size"
msgstr "最小特徵尺寸"

#: src/libslic3r/PrintConfig.cpp:3880
msgid ""
"Minimum thickness of thin features. Model features that are thinner than "
"this value will not be printed, while features thicker than the Minimum "
"feature size will be widened to the Minimum perimeter width. If expressed as "
"a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""
"細薄特徵的最小厚度。設定後將不會打印比設定值更薄的模型特徵，而比最小特徵尺寸"
"更厚的特徵將會被加寬到最小邊緣寬度。如果以百分比表示（例如 25%），則將根據噴"
"嘴直徑的百分比計算。"

#: src/libslic3r/PrintConfig.cpp:3890
msgid "Minimum perimeter width"
msgstr "最小邊緣寬度"

#: src/libslic3r/PrintConfig.cpp:3892
msgid ""
"Width of the perimeter that will replace thin features (according to the "
"Minimum feature size) of the model. If the Minimum perimeter width is "
"thinner than the thickness of the feature, the perimeter will become as "
"thick as the feature itself. If expressed as a percentage (for example 85%), "
"it will be computed based on the nozzle diameter."
msgstr ""
"此設定將會更換模型的細薄特徵（根據最小特徵尺寸）的邊緣寬度。如果最小邊緣寬度"
"小於特徵的厚度，則邊緣將變得與特徵本身一樣厚。如果以百分比表示（例如 85%），"
"則將根據噴嘴直徑的百分比計算。"

#: src/libslic3r/PrintConfig.cpp:4005
msgid "Pinhead front diameter"
msgstr "釘頭前端的直徑"

#: src/libslic3r/PrintConfig.cpp:4006 src/libslic3r/PrintConfig.cpp:4015
#: src/libslic3r/PrintConfig.cpp:4024 src/libslic3r/PrintConfig.cpp:4034
#: src/libslic3r/PrintConfig.cpp:4044 src/libslic3r/PrintConfig.cpp:4065
#: src/libslic3r/PrintConfig.cpp:4088 src/libslic3r/PrintConfig.cpp:4095
#: src/libslic3r/PrintConfig.cpp:4110 src/libslic3r/PrintConfig.cpp:4120
#: src/libslic3r/PrintConfig.cpp:4129 src/libslic3r/PrintConfig.cpp:4142
#: src/libslic3r/PrintConfig.cpp:4152 src/libslic3r/PrintConfig.cpp:4166
#: src/libslic3r/PrintConfig.cpp:4176 src/libslic3r/PrintConfig.cpp:4532
#: src/libslic3r/PrintConfig.cpp:4554 src/libslic3r/PrintConfig.cpp:4561
#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:115
#: src/slic3r/GUI/GUI_Factories.cpp:173 src/slic3r/GUI/Tab.cpp:5945
#: src/slic3r/GUI/Tab.cpp:5947
msgid "Supports"
msgstr "支撐"

#: src/libslic3r/PrintConfig.cpp:4007
msgid "Diameter of the pointing side of the head"
msgstr "支撐頭的直徑"

#: src/libslic3r/PrintConfig.cpp:4014
msgid "Head penetration"
msgstr "釘頭部份穿透"

#: src/libslic3r/PrintConfig.cpp:4016
msgid "How much the pinhead has to penetrate the model surface"
msgstr "釘頭必須穿透模型表面多少"

#: src/libslic3r/PrintConfig.cpp:4023
msgid "Pinhead width"
msgstr "釘頭寬度"

#: src/libslic3r/PrintConfig.cpp:4025
msgid "Width from the back sphere center to the front sphere center"
msgstr "後球型中心到前球型中心的距離"

#: src/libslic3r/PrintConfig.cpp:4033
msgid "Pillar diameter"
msgstr "支撐柱直徑"

#: src/libslic3r/PrintConfig.cpp:4035
msgid "Diameter in mm of the support pillars"
msgstr "支撐柱的直徑（mm）"

#: src/libslic3r/PrintConfig.cpp:4043
msgid "Small pillar diameter percent"
msgstr "小型支撐柱直徑百分比"

#: src/libslic3r/PrintConfig.cpp:4045
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""
"與正常支撐柱直徑相比更小的支撐柱之百分比，用於普通支撐柱無法使用時有問題的區"
"域。"

#: src/libslic3r/PrintConfig.cpp:4054
msgid "Max bridges on a pillar"
msgstr "支撐柱上的最大橋接"

#: src/libslic3r/PrintConfig.cpp:4056
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""
"一根支撐柱上可放置的最大橋接數。橋接支撐點釘頭互相連接以做為小分支的支柱。"

#: src/libslic3r/PrintConfig.cpp:4064
msgid "Max weight on model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4067
msgid ""
"Maximum weight of sub-trees that terminate on the model instead of the print "
"bed. The weight is the sum of the lenghts of all branches emanating from the "
"endpoint."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4075
msgid "Pillar connection mode"
msgstr "支撐柱連接的方式"

#: src/libslic3r/PrintConfig.cpp:4076
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"控制兩個相鄰支撐柱之間的橋接類型。可以是鋸齒形、交叉（雙鋸齒形）或動態，若選"
"用動態的話則是根據兩根柱子的距離在前述兩者之間自動切換。"

#: src/libslic3r/PrintConfig.cpp:4082
msgid "Zig-Zag"
msgstr "聚齒形"

#: src/libslic3r/PrintConfig.cpp:4082
msgid "Cross"
msgstr "交叉形"

#: src/libslic3r/PrintConfig.cpp:4082
msgid "Dynamic"
msgstr "動態"

#: src/libslic3r/PrintConfig.cpp:4094
msgid "Pillar widening factor"
msgstr "支撐柱加寬因素"

#: src/libslic3r/PrintConfig.cpp:4098
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase. The exact amount of "
"increase is unspecified and can change in the future."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4109
msgid "Support base diameter"
msgstr "支撐座直徑"

#: src/libslic3r/PrintConfig.cpp:4111
msgid "Diameter in mm of the pillar base"
msgstr "柱底座直徑 (mm)"

#: src/libslic3r/PrintConfig.cpp:4119
msgid "Support base height"
msgstr "支撐底座高度"

#: src/libslic3r/PrintConfig.cpp:4121
msgid "The height of the pillar base cone"
msgstr "支撐柱底錐體高度"

#: src/libslic3r/PrintConfig.cpp:4128
msgid "Support base safety distance"
msgstr "支撐柱底座安全距離"

#: src/libslic3r/PrintConfig.cpp:4131
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""
"支撐柱底座與模型的最小距離，以 mm 為單位。在零仰角模式下會有意義，他將會根據"
"此設定參數在模型和底座之間插入間隙。"

#: src/libslic3r/PrintConfig.cpp:4141
msgid "Critical angle"
msgstr "臨界角度"

#: src/libslic3r/PrintConfig.cpp:4143
msgid "The default angle for connecting support sticks and junctions."
msgstr "連接支撐桿和連接點的預設角度。"

#: src/libslic3r/PrintConfig.cpp:4151
msgid "Max bridge length"
msgstr "最大橋接"

#: src/libslic3r/PrintConfig.cpp:4153
msgid "The max length of a bridge"
msgstr "橋接的最大長度"

#: src/libslic3r/PrintConfig.cpp:4165
msgid "Max pillar linking distance"
msgstr "最大支撐柱連接距離"

#: src/libslic3r/PrintConfig.cpp:4167
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr "兩個支撐柱相互連接的最大距離。若設定為零時將禁止支撐支柱的層聯。"

#: src/libslic3r/PrintConfig.cpp:4175 src/slic3r/GUI/Tab.cpp:6023
msgid "Object elevation"
msgstr "模型標高"

#: src/libslic3r/PrintConfig.cpp:4177
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""
"支撐柱需將所支撐的模型抬起多少。若有啟用“圍繞模型填充”功能的話，則忽略此設定"
"值。"

#: src/libslic3r/PrintConfig.cpp:4193
msgid "Display width"
msgstr "顯示寬度"

#: src/libslic3r/PrintConfig.cpp:4194
msgid "Width of the display"
msgstr "顯示寬度"

#: src/libslic3r/PrintConfig.cpp:4199
msgid "Display height"
msgstr "顯示高度"

#: src/libslic3r/PrintConfig.cpp:4200
msgid "Height of the display"
msgstr "顯示高度"

#: src/libslic3r/PrintConfig.cpp:4205
msgid "Number of pixels in"
msgstr "像素數量"

#: src/libslic3r/PrintConfig.cpp:4207
msgid "Number of pixels in X"
msgstr "X 軸方向的像素數量"

#: src/libslic3r/PrintConfig.cpp:4213
msgid "Number of pixels in Y"
msgstr "Y 軸方向的像素數量"

#: src/libslic3r/PrintConfig.cpp:4218
msgid "Display horizontal mirroring"
msgstr "顯示水平鏡像"

#: src/libslic3r/PrintConfig.cpp:4219 src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1971
msgid "Mirror horizontally"
msgstr "水平鏡像"

#: src/libslic3r/PrintConfig.cpp:4220
msgid "Enable horizontal mirroring of output images"
msgstr "啟用水平鏡像圖片的輸出"

#: src/libslic3r/PrintConfig.cpp:4225
msgid "Display vertical mirroring"
msgstr "顯示垂直鏡像"

#: src/libslic3r/PrintConfig.cpp:4226 src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1964
msgid "Mirror vertically"
msgstr "垂直鏡像"

#: src/libslic3r/PrintConfig.cpp:4227
msgid "Enable vertical mirroring of output images"
msgstr "啟用垂直鏡像圖片的輸出"

#: src/libslic3r/PrintConfig.cpp:4232
msgid "Display orientation"
msgstr "顯示方向"

#: src/libslic3r/PrintConfig.cpp:4233
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"設定 SLA 打印機內的實際 LCD 顯示方向。 肖像模式會旋轉顯示寬度與高度參數的定"
"義，輸出的圖片會旋轉90度。"

#: src/libslic3r/PrintConfig.cpp:4237
msgid "Landscape"
msgstr "橫式"

#: src/libslic3r/PrintConfig.cpp:4238
msgid "Portrait"
msgstr "肖像"

#. TRN ArrangeDialog: Type of "Geometry handling"
#: src/libslic3r/PrintConfig.cpp:4244 src/libslic3r/PrintConfig.cpp:4743
#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:108
#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:123 src/slic3r/GUI/Tab.cpp:5569
msgid "Fast"
msgstr "快速"

#: src/libslic3r/PrintConfig.cpp:4245
msgid "Fast tilt"
msgstr "快速傾斜"

#: src/libslic3r/PrintConfig.cpp:4246
msgid "Time of the fast tilt"
msgstr "快速傾斜的時間"

#: src/libslic3r/PrintConfig.cpp:4253 src/libslic3r/PrintConfig.cpp:4742
#: src/slic3r/GUI/Tab.cpp:5570
msgid "Slow"
msgstr "慢"

#: src/libslic3r/PrintConfig.cpp:4254
msgid "Slow tilt"
msgstr "緩慢傾斜"

#: src/libslic3r/PrintConfig.cpp:4255
msgid "Time of the slow tilt"
msgstr "緩慢傾斜的時間"

#: src/libslic3r/PrintConfig.cpp:4262 src/libslic3r/PrintConfig.cpp:4744
#: src/slic3r/GUI/Tab.cpp:5571
msgid "High viscosity"
msgstr "高黏度"

#: src/libslic3r/PrintConfig.cpp:4263
msgid "Tilt for high viscosity resin"
msgstr "高黏度樹脂的傾斜度"

#: src/libslic3r/PrintConfig.cpp:4264
msgid "Time of the super slow tilt"
msgstr "超慢的傾斜時間"

#: src/libslic3r/PrintConfig.cpp:4271
msgid "Area fill threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4272
msgid ""
"The value is expressed as a percentage of the bed area. If the area of a "
"particular layer is smaller than 'area_fill', then 'Below area fill "
"threshold' parameters are used to determine the layer separation (tearing) "
"procedure. Otherwise 'Above area fill threshold' parameters are used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4281 src/libslic3r/PrintConfig.cpp:4282
#: src/libslic3r/PrintConfig.cpp:4283
msgid "Printer scaling correction"
msgstr "打印機縮放校正"

#: src/libslic3r/PrintConfig.cpp:4289 src/libslic3r/PrintConfig.cpp:4291
msgid "Printer scaling correction in X axis"
msgstr "打印機 X 軸方向的縮放校正"

#: src/libslic3r/PrintConfig.cpp:4290
msgid "Printer scaling X axis correction"
msgstr "打印機 X 軸方向的縮放校正"

#: src/libslic3r/PrintConfig.cpp:4297 src/libslic3r/PrintConfig.cpp:4299
msgid "Printer scaling correction in Y axis"
msgstr "打印機 Y 軸方向的縮放校正"

#: src/libslic3r/PrintConfig.cpp:4298
msgid "Printer scaling Y axis correction"
msgstr "打印機 Y 軸方向的縮放校正"

#: src/libslic3r/PrintConfig.cpp:4305 src/libslic3r/PrintConfig.cpp:4307
msgid "Printer scaling correction in Z axis"
msgstr "打印機 Z 軸方向的縮放校正"

#: src/libslic3r/PrintConfig.cpp:4306
msgid "Printer scaling Z axis correction"
msgstr "打印機 Z 軸方向的縮放校正"

#: src/libslic3r/PrintConfig.cpp:4313 src/libslic3r/PrintConfig.cpp:4314
msgid "Printer absolute correction"
msgstr "打印機的絕對校正"

#: src/libslic3r/PrintConfig.cpp:4315
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr "此設定將根據校正的標記膨脹或收縮切片的 2D 多邊形。"

#: src/libslic3r/PrintConfig.cpp:4322
msgid "Elephant foot minimum width"
msgstr "大象腳補償"

#: src/libslic3r/PrintConfig.cpp:4324
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr "進行大象腳補償時要保留的最小特徵寬度。"

#: src/libslic3r/PrintConfig.cpp:4331
msgid "Z compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4333
msgid "Number of layers to Z correct to avoid cross layer bleed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4339 src/libslic3r/PrintConfig.cpp:4340
msgid "Printer gamma correction"
msgstr "打印機伽瑪校正"

#: src/libslic3r/PrintConfig.cpp:4341
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""
"這將對光柵化的 2D 多邊形使用伽瑪校正。伽馬值為零時表示其上限為中間值。此項設"
"定是為了消除鋸齒而設計，但不會遺失多邊形中的孔洞。"

#: src/libslic3r/PrintConfig.cpp:4360 src/libslic3r/PrintConfig.cpp:4361
msgid "SLA material type"
msgstr "SLA 材料類型"

#: src/libslic3r/PrintConfig.cpp:4368 src/libslic3r/PrintConfig.cpp:4369
msgid "Initial layer height"
msgstr "初始層高"

#: src/libslic3r/PrintConfig.cpp:4375
msgid "Idle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4376
msgid ""
"Nozzle temperature when the tool is currently not used in multi-tool setups."
"This is only used when 'Ooze prevention' is active in Print Settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4384 src/libslic3r/PrintConfig.cpp:4385
msgid "Bottle volume"
msgstr "樹脂瓶容量"

#: src/libslic3r/PrintConfig.cpp:4386
msgid "ml"
msgstr "ml"

#: src/libslic3r/PrintConfig.cpp:4391 src/libslic3r/PrintConfig.cpp:4392
msgid "Bottle weight"
msgstr "一瓶的重量"

#: src/libslic3r/PrintConfig.cpp:4393
msgid "kg"
msgstr "kg"

#: src/libslic3r/PrintConfig.cpp:4400
msgid "g/ml"
msgstr "g/ml"

#: src/libslic3r/PrintConfig.cpp:4407
msgid "money/bottle"
msgstr "價格/每瓶"

#: src/libslic3r/PrintConfig.cpp:4412
msgid "Faded layers"
msgstr "褪色層"

#: src/libslic3r/PrintConfig.cpp:4413
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr "從最初的曝光時間直到到漸變曝光時間所需的層數"

#: src/libslic3r/PrintConfig.cpp:4420 src/libslic3r/PrintConfig.cpp:4421
msgid "Minimum exposure time"
msgstr "最短曝光時間"

#: src/libslic3r/PrintConfig.cpp:4428 src/libslic3r/PrintConfig.cpp:4429
msgid "Maximum exposure time"
msgstr "最長曝光時間"

#: src/libslic3r/PrintConfig.cpp:4436 src/libslic3r/PrintConfig.cpp:4437
msgid "Exposure time"
msgstr "接觸時間"

#: src/libslic3r/PrintConfig.cpp:4443 src/libslic3r/PrintConfig.cpp:4444
msgid "Minimum initial exposure time"
msgstr "最短的開始曝光時間"

#: src/libslic3r/PrintConfig.cpp:4451 src/libslic3r/PrintConfig.cpp:4452
msgid "Maximum initial exposure time"
msgstr "最長的開始曝光時間"

#: src/libslic3r/PrintConfig.cpp:4459 src/libslic3r/PrintConfig.cpp:4460
msgid "Initial exposure time"
msgstr "最初曝光時間"

#: src/libslic3r/PrintConfig.cpp:4466 src/libslic3r/PrintConfig.cpp:4467
msgid "Correction for expansion"
msgstr "膨脹校正"

#: src/libslic3r/PrintConfig.cpp:4473 src/libslic3r/PrintConfig.cpp:4474
msgid "Correction for expansion in X axis"
msgstr "X 軸方向的膨脹校正"

#: src/libslic3r/PrintConfig.cpp:4480 src/libslic3r/PrintConfig.cpp:4481
msgid "Correction for expansion in Y axis"
msgstr "Y 軸方向的膨脹校正"

#: src/libslic3r/PrintConfig.cpp:4487 src/libslic3r/PrintConfig.cpp:4488
msgid "Correction for expansion in Z axis"
msgstr "Z 軸方向的膨脹校正"

#: src/libslic3r/PrintConfig.cpp:4494
msgid "SLA print material notes"
msgstr "SLA打印材料說明"

#: src/libslic3r/PrintConfig.cpp:4495
msgid "You can put your notes regarding the SLA print material here."
msgstr "您可以在此處添加有關 SLA 打印材料的註釋。"

#: src/libslic3r/PrintConfig.cpp:4509 src/libslic3r/PrintConfig.cpp:4520
msgid "Default SLA material profile"
msgstr "預設的 SLA 材料設定檔"

#: src/libslic3r/PrintConfig.cpp:4531
msgid "Generate supports"
msgstr "產生支撐"

#: src/libslic3r/PrintConfig.cpp:4533
msgid "Generate supports for the models"
msgstr "產生模型的支撑"

#: src/libslic3r/PrintConfig.cpp:4538
msgid "Support tree type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4539
msgid "Support tree building strategy"
msgstr ""

#. TRN One of the "Support tree type"s on SLAPrintSettings : Supports
#: src/libslic3r/PrintConfig.cpp:4544
msgid "Branching (experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4553
msgid "Support only in enforced regions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4555
msgid "Only create support if it lies in a support enforcer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4560
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:123
msgid "Support points density"
msgstr "支撐點密度"

#: src/libslic3r/PrintConfig.cpp:4562
msgid "This is a relative measure of support points density."
msgstr "這是支撐點密度的相對計量。"

#: src/libslic3r/PrintConfig.cpp:4568
msgid "Use pad"
msgstr "使用墊片"

#: src/libslic3r/PrintConfig.cpp:4569 src/libslic3r/PrintConfig.cpp:4576
#: src/libslic3r/PrintConfig.cpp:4590 src/libslic3r/PrintConfig.cpp:4601
#: src/libslic3r/PrintConfig.cpp:4611 src/libslic3r/PrintConfig.cpp:4633
#: src/libslic3r/PrintConfig.cpp:4644 src/libslic3r/PrintConfig.cpp:4651
#: src/libslic3r/PrintConfig.cpp:4658 src/libslic3r/PrintConfig.cpp:4669
#: src/libslic3r/PrintConfig.cpp:4678 src/libslic3r/PrintConfig.cpp:4687
#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:276
#: src/slic3r/GUI/GUI_Factories.cpp:174 src/slic3r/GUI/Tab.cpp:5957
#: src/slic3r/GUI/Tab.cpp:5958 src/slic3r/GUI/Tab.cpp:6023
msgid "Pad"
msgstr "墊片"

#: src/libslic3r/PrintConfig.cpp:4570
msgid "Add a pad underneath the supported model"
msgstr "在支撐的模型下面添加一個墊片"

#: src/libslic3r/PrintConfig.cpp:4575
msgid "Pad wall thickness"
msgstr "墊片的壁厚"

#: src/libslic3r/PrintConfig.cpp:4577
msgid "The thickness of the pad and its optional cavity walls."
msgstr "底座的厚度及可選的中空壁。"

#: src/libslic3r/PrintConfig.cpp:4585
msgid "Pad wall height"
msgstr "墊片的壁高"

#: src/libslic3r/PrintConfig.cpp:4586
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""
"定義墊片中空深度。設定為零可以禁用中空。啟用此功能時要小心，因為某些樹脂可能"
"會在模型中內產生極強的吸力效果，這可能使打印模型很難從離型膜上剝離而造成打印"
"變形。"

#: src/libslic3r/PrintConfig.cpp:4599
msgid "Pad brim size"
msgstr "墊片的帽邊大小"

#: src/libslic3r/PrintConfig.cpp:4600
msgid "How far should the pad extend around the contained geometry"
msgstr "底座需圍繞幾何體延伸多遠"

#: src/libslic3r/PrintConfig.cpp:4610
msgid "Max merge distance"
msgstr "最大合併距離"

#: src/libslic3r/PrintConfig.cpp:4612
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"有些模型可以與幾個較小的墊片而不是一個大墊片合併。此參數定義兩個較小底座相離"
"中心應該有多遠。如果它們離很近的話，將會合併成一個墊片。"

#: src/libslic3r/PrintConfig.cpp:4632
msgid "Pad wall slope"
msgstr "墊片牆面的斜度"

#: src/libslic3r/PrintConfig.cpp:4634
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr "墊片牆面相對於載台平面的傾斜角度。 90度表示著直立牆面。"

#: src/libslic3r/PrintConfig.cpp:4643 src/slic3r/GUI/Tab.cpp:6023
msgid "Pad around object"
msgstr "在模型周圍填充"

#: src/libslic3r/PrintConfig.cpp:4645
msgid "Create pad around object and ignore the support elevation"
msgstr "在模型邊緣建立墊片並且忽略支撐的高度"

#: src/libslic3r/PrintConfig.cpp:4650
msgid "Pad around object everywhere"
msgstr "在模型周圍全部使用墊片"

#: src/libslic3r/PrintConfig.cpp:4652
msgid "Force pad around object everywhere"
msgstr "總是在模型周圍使用墊片"

#: src/libslic3r/PrintConfig.cpp:4657
msgid "Pad object gap"
msgstr "墊片模型的間隙"

#: src/libslic3r/PrintConfig.cpp:4659
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr "在零仰角模式下，模型底部與墊片間之間隙。"

#: src/libslic3r/PrintConfig.cpp:4668
msgid "Pad object connector stride"
msgstr "墊片模型連接的跨度"

#: src/libslic3r/PrintConfig.cpp:4670
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr "連接模型和其底座兩個連接桿之間的距離。"

#: src/libslic3r/PrintConfig.cpp:4677
msgid "Pad object connector width"
msgstr "墊片模型連接的寬度"

#: src/libslic3r/PrintConfig.cpp:4679
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr "連接模型和底座間連接桿之間的寬度。"

#: src/libslic3r/PrintConfig.cpp:4686
msgid "Pad object connector penetration"
msgstr "墊片模型連接的穿透度"

#: src/libslic3r/PrintConfig.cpp:4689
msgid "How much should the tiny connectors penetrate into the model body."
msgstr "微型連接需要滲透到模型主體中多少。"

#: src/libslic3r/PrintConfig.cpp:4696
msgid "Enable hollowing"
msgstr "啟用挖空"

#: src/libslic3r/PrintConfig.cpp:4697 src/libslic3r/PrintConfig.cpp:4704
#: src/libslic3r/PrintConfig.cpp:4714 src/libslic3r/PrintConfig.cpp:4723
#: src/libslic3r/SLA/Hollowing.cpp:93 src/libslic3r/SLA/Hollowing.cpp:98
#: src/libslic3r/SLA/Hollowing.cpp:113 src/libslic3r/SLA/Hollowing.cpp:122
#: src/slic3r/GUI/GUI_Factories.cpp:175 src/slic3r/GUI/Tab.cpp:5975
#: src/slic3r/GUI/Tab.cpp:5976
msgid "Hollowing"
msgstr "鏤空"

#: src/libslic3r/PrintConfig.cpp:4698
msgid "Hollow out a model to have an empty interior"
msgstr "挖空模型以獲得中空的模型內部"

#: src/libslic3r/PrintConfig.cpp:4703
msgid "Wall thickness"
msgstr "模型壁厚"

#: src/libslic3r/PrintConfig.cpp:4705
msgid "Minimum wall thickness of a hollowed model."
msgstr "空心模型的最小壁厚。"

#: src/libslic3r/PrintConfig.cpp:4713
msgid "Accuracy"
msgstr "準確性"

#: src/libslic3r/PrintConfig.cpp:4715
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr "計算的性能與計算準確性之間的取捨。較低的值可能會產生不需要的虛像。"

#: src/libslic3r/PrintConfig.cpp:4722
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
msgid "Closing distance"
msgstr "封閉距離"

#: src/libslic3r/PrintConfig.cpp:4725
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""
"模型的鏤空分成兩個步驟：首先在模型中計算更深之假設的內部（偏移量加上封閉距"
"離），然後將其膨脹回指定的偏移量。更大的封閉距離會使內部更為圓潤。但設定為為"
"零時，內部將與外部的樣子最相進。"

#: src/libslic3r/PrintConfig.cpp:4737
msgid "Print speed"
msgstr "打印速度"

#: src/libslic3r/PrintConfig.cpp:4739
msgid ""
"A slower printing profile might be necessary when using materials with "
"higher viscosity or with some hollowed parts. It slows down the tilt "
"movement and adds a delay before exposure."
msgstr ""
"當使用黏度較高的數脂或在打印某些中空模型時，可能需要較慢的打印設定檔。它降低"
"了傾斜運動並且在曝光前增加了延遲時間。"

#: src/libslic3r/PrintConfig.cpp:4750
msgid "Format of the output SLA archive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4755
msgid "SLA output precision"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4756
msgid "Minimum resolution in nanometers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4797
msgid "Delay before exposure"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4798
msgid "Delay before exposure after previous layer separation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4806
msgid "Delay after exposure"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4807
msgid "Delay after exposure before layer separation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4815
msgid "Tower hop height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4816
msgid "The height of the tower raise."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4824
msgid "Tower speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4825
msgid "Tower speed used for tower raise."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4861
msgid "Tilt down initial speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4862
msgid "Tilt speed used for an initial portion of tilt down move."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4864 src/libslic3r/PrintConfig.cpp:4872
#: src/libslic3r/PrintConfig.cpp:4880 src/libslic3r/PrintConfig.cpp:4888
msgid "μ-steps/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4869
msgid "Tilt down finish speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4870
msgid "Tilt speed used for the rest of the tilt down move."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4877
msgid "Tilt up initial speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4878
msgid "Tilt speed used for an initial portion of tilt up move."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4885
msgid "Tilt up finish speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4886
msgid "Tilt speed used for the rest of the tilt-up."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4893
msgid "Use tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4894
msgid ""
"If enabled, tilt is used for layer separation. Otherwise, all the parameters "
"below are ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4899
msgid "Tilt down offset steps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4900
msgid ""
"Number of steps to move down from the calibrated (horizontal) position with "
"'tilt_down_initial_speed'."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4901 src/libslic3r/PrintConfig.cpp:4936
msgid "μ-steps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4908
msgid "Tilt down offset delay"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4909
msgid "Delay after the tilt reaches 'tilt_down_offset_steps' position."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4917
msgid "Tilt down cycles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4918
msgid "Number of cycles to split the rest of the tilt down move."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4925
msgid "Tilt down delay"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4926
msgid "The delay between tilt-down cycles."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4934
msgid "Tilt up offset steps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4935
msgid "Move tilt up to calibrated (horizontal) position minus this offset."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4943
msgid "Tilt up offset delay"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4944
msgid "Delay after the tilt reaches 'tilt_up_offset_steps' position."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4952
msgid "Tilt up cycles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4953
msgid "Number of cycles to split the rest of the tilt-up."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4960
msgid "Tilt up delay"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4961
msgid "The delay between tilt-up cycles."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5681
msgid "Load config file"
msgstr "匯入設定檔"

#: src/libslic3r/PrintConfig.cpp:5682
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr "從指定檔案匯入設定。它可以多次使用於從多個檔案匯入選項。"

#: src/libslic3r/PrintConfig.cpp:5708
msgid "Help"
msgstr "輔助說明"

#: src/libslic3r/PrintConfig.cpp:5709
msgid "Show this help."
msgstr "顯示此輔助說明。"

#: src/libslic3r/PrintConfig.cpp:5714
msgid "Help (FFF options)"
msgstr "輔助說明（FFF 選項）"

#: src/libslic3r/PrintConfig.cpp:5715
msgid "Show the full list of print/G-code configuration options."
msgstr "顯示打印/G-code 設定選項的完整列表。"

#: src/libslic3r/PrintConfig.cpp:5719
msgid "Help (SLA options)"
msgstr "輔助說明（SLA 選項）"

#: src/libslic3r/PrintConfig.cpp:5720
msgid "Show the full list of SLA print configuration options."
msgstr "顯示 SLA 打印設定選項的完整列表。"

#: src/libslic3r/PrintConfig.cpp:5743
msgid "G-code viewer"
msgstr "G-code查看器"

#: src/libslic3r/PrintConfig.cpp:5744
msgid "Visualize an already sliced and saved G-code"
msgstr "顯示已經切片並保存的 G-code 檔"

#: src/libslic3r/PrintConfig.cpp:5751
msgid "Save config file"
msgstr "保存設定檔"

#: src/libslic3r/PrintConfig.cpp:5752
msgid "Save configuration to the specified file."
msgstr "將設定儲存成指定的檔案。"

#: src/libslic3r/PrintConfig.cpp:5758
msgid "Output Model Info"
msgstr "輸出模型資訊"

#: src/libslic3r/PrintConfig.cpp:5759
msgid "Write information about the model to the console."
msgstr "將模型相關的資訊寫入控制台。"

#: src/libslic3r/PrintConfig.cpp:5763
msgid "Export OBJ"
msgstr "匯出為 OBJ 檔"

#: src/libslic3r/PrintConfig.cpp:5764
msgid "Export the model(s) as OBJ."
msgstr "將模型匯出爲 OBJ 檔案。"

#: src/libslic3r/PrintConfig.cpp:5768
msgid "Export STL"
msgstr "匯出為 STL 檔"

#: src/libslic3r/PrintConfig.cpp:5769
msgid "Export the model(s) as STL."
msgstr "將模型匯出爲 STL 檔案。"

#: src/libslic3r/PrintConfig.cpp:5775
msgid "Export 3MF"
msgstr "匯出為 3MF檔"

#: src/libslic3r/PrintConfig.cpp:5776
msgid "Export the model(s) as 3MF."
msgstr "將模型匯出爲 3MF 檔案。"

#: src/libslic3r/PrintConfig.cpp:5783
msgid "Slice"
msgstr "切入"

#: src/libslic3r/PrintConfig.cpp:5785
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value and export the result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5791
msgid "Export SLA"
msgstr "匯出為 SLA 檔"

#: src/libslic3r/PrintConfig.cpp:5792
msgid "Slice the model and export SLA printing layers as PNG."
msgstr "切片模型並將 SLA 打印層匯出為 PNG 檔案。"

#: src/libslic3r/PrintConfig.cpp:5797 src/slic3r/GUI/KBShortcutsDialog.cpp:101
#: src/slic3r/GUI/Plater.cpp:7289 src/slic3r/GUI/Sidebar.cpp:499
msgid "Export G-code"
msgstr "匯出G-code"

#: src/libslic3r/PrintConfig.cpp:5798
msgid "Slice the model and export toolpaths as G-code."
msgstr "切片模型並將工具路徑匯出為 G-code 檔。"

#: src/libslic3r/PrintConfig.cpp:5809
msgid "Align XY"
msgstr "對齊 XY角度"

#: src/libslic3r/PrintConfig.cpp:5810
msgid "Align the model to the given point."
msgstr "將模型對齊指定點。"

#: src/libslic3r/PrintConfig.cpp:5814 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1252
msgid "Cut"
msgstr "切割"

#: src/libslic3r/PrintConfig.cpp:5815
msgid "Cut model at the given Z."
msgstr "在指定的 Z 方向位置切割模型。"

#: src/libslic3r/PrintConfig.cpp:5819
#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:95
msgid "Center"
msgstr "置中"

#: src/libslic3r/PrintConfig.cpp:5820
msgid "Center the print around the given center."
msgstr "將打印依照指定的中心置中。"

#: src/libslic3r/PrintConfig.cpp:5824
msgid "Don't arrange"
msgstr "不要排列"

#: src/libslic3r/PrintConfig.cpp:5825
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr "合併之前不要重新排列指定的模型並保留模型的原始 XY 坐標。"

#: src/libslic3r/PrintConfig.cpp:5828
msgid "Ensure on bed"
msgstr "貼保放在載台上"

#: src/libslic3r/PrintConfig.cpp:5829
msgid ""
"Lift the object above the bed when it is partially below. Enabled by "
"default, use --no-ensure-on-bed to disable."
msgstr ""
"當模型有一部分位於載台下方時，則將其抬高到載台上方。預設為啟用，使用 --no-"
"ensure-on-bed 來禁用。"

#: src/libslic3r/PrintConfig.cpp:5833
msgid "Duplicate"
msgstr "複製"

#: src/libslic3r/PrintConfig.cpp:5834
msgid "Multiply copies by this factor."
msgstr "將副本乘以這個數量。"

#: src/libslic3r/PrintConfig.cpp:5838
msgid "Duplicate by grid"
msgstr "按網格複製"

#: src/libslic3r/PrintConfig.cpp:5839
msgid "Multiply copies by creating a grid."
msgstr "通過建立網格來複製副本。"

#: src/libslic3r/PrintConfig.cpp:5842 src/slic3r/GUI/GUI_Factories.cpp:1041
#: src/slic3r/GUI/GUI_ObjectList.cpp:2263
msgid "Merge"
msgstr "合併"

#: src/libslic3r/PrintConfig.cpp:5843
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"將提供的模型排列在整個載台中，並將它們合併為一個模型，以便同時執行一次操作。"

#: src/libslic3r/PrintConfig.cpp:5847
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:574
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:690
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:730
msgid "Rotate"
msgstr "旋轉"

#: src/libslic3r/PrintConfig.cpp:5848
msgid "Rotation angle around the Z axis in degrees."
msgstr "沿 Z 軸的旋轉角度（以度為單位）。"

#: src/libslic3r/PrintConfig.cpp:5852
msgid "Rotate around X"
msgstr "沿著 X 軸旋轉"

#: src/libslic3r/PrintConfig.cpp:5853
msgid "Rotation angle around the X axis in degrees."
msgstr "沿 X 軸的旋轉角度（以度為單位）。"

#: src/libslic3r/PrintConfig.cpp:5857
msgid "Rotate around Y"
msgstr "沿著 Y 軸旋轉"

#: src/libslic3r/PrintConfig.cpp:5858
msgid "Rotation angle around the Y axis in degrees."
msgstr "沿 Y 軸的旋轉角度（以度為單位）。"

#: src/libslic3r/PrintConfig.cpp:5862
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1284
#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:122
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:256
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:691
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:704
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:721
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:731
msgid "Scale"
msgstr "縮放"

#: src/libslic3r/PrintConfig.cpp:5863
msgid "Scaling factor or percentage."
msgstr "比例因素或百分比。"

#: src/libslic3r/PrintConfig.cpp:5867 src/slic3r/GUI/GUI_Factories.cpp:1203
#: src/slic3r/GUI/GUI_Factories.cpp:1234
msgid "Split"
msgstr "拆開"

#: src/libslic3r/PrintConfig.cpp:5868
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr "檢測到指定模型中有未連接的部分並將它們拆開為獨立的模型。"

#: src/libslic3r/PrintConfig.cpp:5871
msgid "Scale to Fit"
msgstr "縮放以適合"

#: src/libslic3r/PrintConfig.cpp:5872
msgid "Scale to fit the given volume."
msgstr "縮放以適應指定的體積。"

#: src/libslic3r/PrintConfig.cpp:5881
msgid "Ignore non-existent config files"
msgstr "忽略不存在的設定檔"

#: src/libslic3r/PrintConfig.cpp:5882
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "如果提供給 --load 的檔案不存在，請不要忽略他。"

#: src/libslic3r/PrintConfig.cpp:5885
msgid ""
"Forward-compatibility rule when loading configurations from config files and "
"project files (3MF, AMF)."
msgstr "從設定檔和項目檔案（3MF、AMF）匯入設定時向下相容的規則。"

#: src/libslic3r/PrintConfig.cpp:5886
msgid ""
"This version of PrusaSlicer may not understand configurations produced by "
"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
"the list of supported firmware flavors. One may decide to bail out or to "
"substitute an unknown value with a default silently or verbosely."
msgstr ""
"此版本的 PrusaSlicer 可能無法理解最新 PrusaSlicer 版本產生的設定。例如較新的 "
"PrusaSlicer 可能會延伸支援韌體版本的列表。一般可能會決定放棄或用預設值來取代"
"未知的設定值，讓軟體默默進行工作。"

#: src/libslic3r/PrintConfig.cpp:5890
msgid "Bail out on unknown configuration values"
msgstr "擺脫未知的設定值"

#: src/libslic3r/PrintConfig.cpp:5891
msgid ""
"Enable reading unknown configuration values by verbosely substituting them "
"with defaults."
msgstr "經由用預設值並詳細告知更換它們來啟用所讀取到的未知設定值。"

#: src/libslic3r/PrintConfig.cpp:5892
msgid ""
"Enable reading unknown configuration values by silently substituting them "
"with defaults."
msgstr "經由用預設值默默更換它們來啟用所讀取的未知預設值。"

#: src/libslic3r/PrintConfig.cpp:5897
msgid "Output File"
msgstr "輸出檔案"

#: src/libslic3r/PrintConfig.cpp:5898
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr "要寫進輸出的檔案（如果未指定，它將基於當前輸入的檔案）。"

#: src/libslic3r/PrintConfig.cpp:5902
msgid "Data directory"
msgstr "資料目錄"

#: src/libslic3r/PrintConfig.cpp:5903
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"在指定目錄匯入和儲存設定。這對於維護不同的設定檔或包括來自網路儲存的設定很有"
"用。"

#: src/libslic3r/PrintConfig.cpp:5906
msgid "Maximum number of threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5907
msgid ""
"Sets the maximum number of threads the slicing process will use. If not "
"defined, it will be decided automatically."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5911
msgid "Logging level"
msgstr "日誌記錄級別"

#: src/libslic3r/PrintConfig.cpp:5912
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""
"設定日誌記錄敏感度。 0：致命，1：錯誤，2：警告，3：資訊，4：除錯，5：跟踪\n"
"例如： loglevel=2 則是記錄致命的日誌、錯誤和警告級別的訊息。"

#: src/libslic3r/PrintConfig.cpp:5918
msgid "Automatic OpenGL antialiasing samples number selection"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5919
msgid ""
"Automatically select the highest number of samples for OpenGL antialiasing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5925
msgid "OpenGL version"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5926
msgid "Select a specific version of OpenGL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5931
msgid "OpenGL compatibility profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5932
msgid "Enable OpenGL compatibility profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5937
msgid "OpenGL debug output"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5938
msgid ""
"Activate OpenGL debug output on graphic cards which support it (OpenGL 4.3 "
"or higher)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5944
msgid "Single instance mode"
msgstr "單實例模式"

#: src/libslic3r/PrintConfig.cpp:5945
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""
"如果啟用，命令列參數將發送到 GUI PrusaSlicer 的現有實例，或者啟動現有的 "
"PrusaSlicer 許可證視窗。從應用首選項中覆蓋\"single_instance\"設定值。"

#: src/libslic3r/PrintConfig.cpp:5950
msgid "Delete files after loading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5951
msgid "Delete files after loading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5955
msgid "Render with a software renderer"
msgstr "使用軟體算繪器來算繪"

#: src/libslic3r/PrintConfig.cpp:5956
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""
"使用軟體算繪器進行算繪。匯入內建的 MESA 軟體算繪器而不是預設的 OpenGL 驅動程"
"式。"

#: src/libslic3r/PrintConfig.cpp:5984
msgid "Current z-hop"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5985
msgid "Contains z-hop present at the beginning of the custom G-code block."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5993 src/slic3r/GUI/GCodeViewer.cpp:446
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:241
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:657
msgid "Position"
msgstr "位置"

#: src/libslic3r/PrintConfig.cpp:5994
msgid ""
"Position of the extruder at the beginning of the custom G-code block. If the "
"custom G-code travels somewhere else, it should write to this variable so "
"PrusaSlicer knows where it travels from when it gets control back."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:5998 src/slic3r/GUI/Tab.cpp:3381
msgid "Retraction"
msgstr "回抽"

#: src/libslic3r/PrintConfig.cpp:5999
msgid ""
"Retraction state at the beginning of the custom G-code block. If the custom "
"G-code moves the extruder axis, it should write to this variable so "
"PrusaSlicer deretracts correctly when it gets control back."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6003
msgid "Extra deretraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6004
msgid "Currently planned extra extruder priming after deretraction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6007
msgid "Absolute E position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6008
msgid ""
"Current position of the extruder axis. Only used with absolute extruder "
"addressing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6016
msgid "Current extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6017
msgid "Zero-based index of currently used extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6020
msgid "Current object index"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6021
msgid ""
"Specific for sequential printing. Zero-based index of currently printed "
"object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6024
msgid "Has single extruder MM priming"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6025
msgid "Are the extra multi-material priming regions used in this print?"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6028
msgid "Has wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6029
msgid "Whether or not wipe tower is being generated in the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6032
msgid "Initial extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6033
msgid ""
"Zero-based index of the first extruder used in the print. Same as "
"initial_tool."
msgstr ""

#. TRN: Meaning 'filament type of the initial filament'
#: src/libslic3r/PrintConfig.cpp:6037
msgid "Initial filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6038
msgid "String containing filament type of the first used extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6041
msgid "Initial tool"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6042
msgid ""
"Zero-based index of the first extruder used in the print. Same as "
"initial_extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6045
msgid "Is extruder used?"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6046
msgid ""
"Vector of booleans stating whether a given extruder is used in the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6054
msgid "Volume per extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6055
msgid "Total filament volume extruded per extruder during the entire print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6058 src/libslic3r/PrintConfig.cpp:6066
msgid "Print time (normal mode)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6059
msgid ""
"Estimated print time when printed in normal mode (i.e. not in silent mode). "
"Same as print_time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6062
msgid "Number of printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6063
msgid "Number of extruders used during the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6067
msgid ""
"Estimated print time when printed in normal mode (i.e. not in silent mode). "
"Same as normal_print_time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6070
msgid "Used filament types"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6071
msgid "Comma-separated list of all filament types used during the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6074
msgid "Print time (silent mode)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6075
msgid "Estimated print time when printed in silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6078
msgid "Total cost"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6079
msgid ""
"Total cost of all material used in the print. Calculated from cost in "
"Filament Settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6082 src/libslic3r/PrintConfig.cpp:6110
msgid "Total weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6083 src/libslic3r/PrintConfig.cpp:6111
msgid ""
"Total weight of the print. Calculated from density in Filament Settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6086
msgid "Total wipe tower cost"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6087
msgid ""
"Total cost of the material wasted on the wipe tower. Calculated from cost in "
"Filament Settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6090
msgid "Wipe tower volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6091
msgid "Total filament volume extruded on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6094 src/slic3r/GUI/GCodeViewer.cpp:2504
#: src/slic3r/GUI/GCodeViewer.cpp:2506 src/slic3r/GUI/GCodeViewer.cpp:2775
msgid "Used filament"
msgstr "耗材"

#: src/libslic3r/PrintConfig.cpp:6095
msgid "Total length of filament used in the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6098
msgid "Total number of toolchanges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6099
msgid "Number of toolchanges during the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6102
msgid "Total volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6103
msgid "Total volume of filament used during the entire print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6106
msgid "Weight per extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6107
msgid ""
"Weight per extruder extruded during the entire print. Calculated from "
"density in Filament Settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6114
msgid "Total layer count"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6115
msgid "Number of layers in the entire print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6123
msgid "Number of objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6124
msgid "Total number of objects in the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6127
msgid "Number of instances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6128
msgid "Total number of object instances in the print, summed over all objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6131
msgid "Scale per object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6132
msgid ""
"Contains a string with the information about what scaling was applied to the "
"individual objects. Indexing of the objects is zero-based (first object has "
"index 0).\n"
"Example: 'x:100% y:50% z:100%'."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6137
msgid "Input filename without extension"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6138
msgid "Source filename of the first object, without extension."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6145
msgid ""
"The vector has two elements: x and y coordinate of the point. Values in mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6146
msgid ""
"The vector has two elements: x and y dimension of the bounding box. Values "
"in mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6149
msgid "First layer convex hull"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6150
msgid ""
"Vector of points of the first layer convex hull. Each element has the "
"following format: '[x, y]' (x and y are floating-point numbers in mm)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6154
msgid "Bottom-left corner of first layer bounding box"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6158
msgid "Top-right corner of first layer bounding box"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6162
msgid "Size of the first layer bounding box"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6166
msgid "Bottom-left corner of print bed bounding box"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6170
msgid "Top-right corner of print bed bounding box"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6174
msgid "Size of the print bed bounding box"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6183
msgid "Timestamp"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6184
msgid "String containing current time in yyyyMMdd-hhmmss format."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6187
msgid "Year"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6190
msgid "Month"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6193
msgid "Day"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6196
msgid "Hour"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6199
msgid "Minute"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6202
msgid "Second"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6210
msgid "Number of extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6211
msgid ""
"Total number of extruders, regardless of whether they are used in the "
"current print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6214
msgid "Print preset name"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6215
msgid "Name of the print preset used for slicing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6218
msgid "Filament preset name"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6219
msgid ""
"Names of the filament presets used for slicing. The variable is a vector "
"containing one name for each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6223
msgid "Printer preset name"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6224
msgid "Name of the printer preset used for slicing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6227
msgid "Physical printer name"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6228
msgid "Name of the physical printer used for slicing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6253
msgid "Layer number"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6254
msgid "Zero-based index of the current layer (i.e. first layer is number 0)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6257
msgid "Layer Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6258
msgid ""
"Height of the current layer above the print bed, measured to the top of the "
"layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6261
msgid "Maximal layer Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6262
msgid "Height of the last layer above the print bed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6265
msgid "Current extruder index"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6266
msgid ""
"Zero-based index of currently used extruder (i.e. first extruder has index "
"0)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6269
msgid "Previous extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6270
msgid ""
"Index of the extruder that is being unloaded. The index is zero based (first "
"extruder has index 0)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6273
msgid "Next extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6274
msgid ""
"Index of the extruder that is being loaded. The index is zero based (first "
"extruder has index 0)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6277
msgid "Toolchange Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6278
msgid ""
"Height above the print bed when the toolchange takes place. Usually the same "
"as layer_z, but can be different."
msgstr ""

#. TRN: This is a label in custom g-code editor dialog, belonging to color_change_extruder. Denoted index of the extruder for which color change is performed.
#: src/libslic3r/PrintConfig.cpp:6282
msgid "Color change extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:6283
msgid ""
"Index of the extruder for which color change will be performed. The index is "
"zero based (first extruder has index 0)."
msgstr ""

#: src/libslic3r/PrintObject.cpp:179
msgid "Generating perimeters"
msgstr "產生邊緣"

#: src/libslic3r/PrintObject.cpp:286
msgid "Preparing infill"
msgstr "準備填充"

#. TRN Status for the Print calculation
#: src/libslic3r/PrintObject.cpp:446
msgid "Making infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:495
msgid "Searching support spots"
msgstr ""

#: src/libslic3r/PrintObject.cpp:520
msgid "Generating support material"
msgstr "產生支撐材料"

#: src/libslic3r/PrintObject.cpp:543
msgid "Estimating curled extrusions"
msgstr ""

#: src/libslic3r/PrintObject.cpp:564
msgid "Calculating overhanging perimeters"
msgstr ""

#: src/libslic3r/PrintObjectSlice.cpp:531
msgid "Processing triangulated mesh"
msgstr ""

#: src/libslic3r/PrintObjectSlice.cpp:902
msgid ""
"An object has enabled XY Size compensation which will not be used because it "
"is also multi-material painted.\n"
"XY Size compensation cannot be combined with multi-material painting."
msgstr ""

#: src/libslic3r/PrintObjectSlice.cpp:918
msgid ""
"An object has enabled XY Size compensation which will not be used because it "
"is also fuzzy skin painted.\n"
"XY Size compensation cannot be combined with fuzzy skin painting."
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:535
msgid "Pad brim size is too small for the current configuration."
msgstr "墊片邊緣尺寸對於當前設定來說太小。"

#: src/libslic3r/SLAPrint.cpp:635
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr "沒有支撐點無法繼續！添加支撐點或禁用支撐的產生。"

#: src/libslic3r/SLAPrint.cpp:647
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr "模型的高度太低。使用“圍繞模型的墊片”功能來打印沒有高標的模型。"

#: src/libslic3r/SLAPrint.cpp:653
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""
"支撐柱的末端將安排在模型和墊片之間的間隙上。 '支撐底座安全距離' 必須大於 '圍"
"繞模型的墊片' 參數以避免這種情況。"

#: src/libslic3r/SLAPrint.cpp:668
msgid "Exposition time is out of printer profile bounds."
msgstr "描述時間超出了打印機設定檔案範圍。"

#: src/libslic3r/SLAPrint.cpp:675
msgid "Initial exposition time is out of printer profile bounds."
msgstr "最初描述時間超出打印機設定檔案範圍。"

#: src/libslic3r/SLAPrint.cpp:683
msgid ""
"Invalid Head penetration\n"
"Head penetration should not be greater than the Head width.\n"
"Please check value of Head penetration in Print Settings or Material "
"Overrides."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:692
msgid ""
"Invalid pinhead diameter\n"
"Pinhead front diameter should be smaller than the Pillar diameter.\n"
"Please check value of Pinhead front diameter in Print Settings or Material "
"Overrides."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:700
msgid ""
"Disabling the 'Use tilt' function causes the object to separate away from "
"the film in the vertical direction only. Therefore, it is necessary to set "
"the 'Tower hop height' parameter to reasonable value. The recommended value "
"is 5 mm."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:712
#, c-format, boost-format
msgid "Unknown archive format: %s"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:828
msgid "Slicing done"
msgstr "切片完成"

#. TRN Status of the SLA print calculation
#: src/libslic3r/SLAPrintSteps.cpp:80
msgid "Assembling model from parts"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:81
msgid "Hollowing model"
msgstr "鏤空模型"

#: src/libslic3r/SLAPrintSteps.cpp:82
msgid "Drilling holes into model."
msgstr "在模型中鑽孔。"

#: src/libslic3r/SLAPrintSteps.cpp:83
msgid "Slicing model"
msgstr "切片模型"

#: src/libslic3r/SLAPrintSteps.cpp:84 src/libslic3r/SLAPrintSteps.cpp:836
msgid "Generating support points"
msgstr "產生支撐點"

#: src/libslic3r/SLAPrintSteps.cpp:85
msgid "Generating support tree"
msgstr "產生支撐樹"

#: src/libslic3r/SLAPrintSteps.cpp:86
msgid "Generating pad"
msgstr "產生墊片"

#: src/libslic3r/SLAPrintSteps.cpp:87
msgid "Slicing supports"
msgstr "切片支撐"

#: src/libslic3r/SLAPrintSteps.cpp:102
msgid "Merging slices and calculating statistics"
msgstr "合併切片和計算統計資料"

#: src/libslic3r/SLAPrintSteps.cpp:103
msgid "Rasterizing layers"
msgstr "柵格化圖層"

#: src/libslic3r/SLAPrintSteps.cpp:329
msgid ""
"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
msgstr "要被挖空的網格不適合挖空（沒有綁定體積）。"

#: src/libslic3r/SLAPrintSteps.cpp:336
msgid "Unable to drill the current configuration of holes into the model."
msgstr "無法將當前設定的孔鑽到模型中。"

#: src/libslic3r/SLAPrintSteps.cpp:345
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr "在網格中鑽孔失敗。這通常是由損壞的模型引起的。請先嘗試修復它。"

#: src/libslic3r/SLAPrintSteps.cpp:353
msgid "Failed to drill some holes into the model"
msgstr "無法在模型中鑽一些孔"

#: src/libslic3r/SLAPrintSteps.cpp:363
msgid ""
"Some parts of the print will be previewed with approximated meshes. This "
"does not affect the quality of slices or the physical print in any way."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:887 src/libslic3r/SLAPrintSteps.cpp:896
#: src/libslic3r/SLAPrintSteps.cpp:934
msgid "Visualizing supports"
msgstr "可視化支撐"

#: src/libslic3r/SLAPrintSteps.cpp:926
msgid "No pad can be generated for this model with the current configuration"
msgstr "使用當前設定無法為該模型生成墊片"

#: src/libslic3r/SLAPrintSteps.cpp:1055
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr "有不可打印的模型。請嘗試調整支撐設定使模型可以打印。"

#: src/libslic3r/Utils.cpp:1052 src/slic3r/GUI/DoubleSliderForLayers.cpp:1072
#, boost-format
msgid "%1%d"
msgstr ""

#: src/libslic3r/Utils.cpp:1053 src/slic3r/GUI/DoubleSliderForLayers.cpp:1073
#, boost-format
msgid "%1%h"
msgstr ""

#. TRN "m" means "minutes"
#: src/libslic3r/Utils.cpp:1055 src/slic3r/GUI/DoubleSliderForLayers.cpp:1074
#, boost-format
msgid "%1%m"
msgstr ""

#: src/libslic3r/Utils.cpp:1063 src/slic3r/GUI/DoubleSliderForLayers.cpp:1075
#, boost-format
msgid "%1%s"
msgstr ""

#: src/libslic3r/Zipper.cpp:28
msgid "Error with ZIP archive"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:588
msgid "Taking a configuration snapshot failed."
msgstr "取得設定快照失敗。"

#: src/slic3r/Config/Snapshot.cpp:602
msgid ""
"PrusaSlicer has encountered an error while taking a configuration snapshot."
msgstr "PrusaSlicer 在取得設定快照時遇到錯誤。"

#: src/slic3r/Config/Snapshot.cpp:603
msgid "PrusaSlicer error"
msgstr "PrusaSlicer 錯誤"

#: src/slic3r/Config/Snapshot.cpp:605
msgid "Continue"
msgstr "繼續"

#: src/slic3r/Config/Snapshot.cpp:605
msgid "Abort"
msgstr "放棄"

#: src/slic3r/GUI/AboutDialog.cpp:56 src/slic3r/GUI/AboutDialog.cpp:316
msgid "Portions copyright"
msgstr "部分版權"

#: src/slic3r/GUI/AboutDialog.cpp:154 src/slic3r/GUI/AboutDialog.cpp:280
msgid "Copyright"
msgstr "版權"

#: src/slic3r/GUI/AboutDialog.cpp:155
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr "所有以下程式（程式庫）的許可協議是申請許可協議的一部分"

#: src/slic3r/GUI/AboutDialog.cpp:224
#, c-format, boost-format
msgid "About %s"
msgstr "關於 %s"

#: src/slic3r/GUI/AboutDialog.cpp:255 src/slic3r/GUI/AboutDialog.cpp:382
#: src/slic3r/GUI/GUI_App.cpp:302
msgid "Version"
msgstr "版本"

#. TRN AboutDialog: "Slic3r %1% GNU Affero General Public License"
#: src/slic3r/GUI/AboutDialog.cpp:282
msgid "is licensed under the"
msgstr "是根據"

#: src/slic3r/GUI/AboutDialog.cpp:283
msgid "GNU Affero General Public License, version 3"
msgstr "GNU 通用公共許可證，版本 3"

#: src/slic3r/GUI/AboutDialog.cpp:284
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr "Prusaslicer軟體是基於Alessandro Ranellucci和Reprap 社區的Slic3R軟體。"

#: src/slic3r/GUI/AboutDialog.cpp:285
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous 等組織與個人單位。"

#: src/slic3r/GUI/AboutDialog.cpp:322
msgid "Copy Version Info"
msgstr "複製版本資訊"

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:48
msgid "Arrange options"
msgstr "佈局選項"

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:57
#, boost-format
msgid "Press %1%left mouse button to enter the exact value"
msgstr "按%1%滑鼠左鍵輸入準確值"

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:76
msgid "Spacing"
msgstr "間距"

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:82
msgid "Spacing from bed"
msgstr ""

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:88
msgid "Enable rotations (slow)"
msgstr "啟用迴轉（慢）"

#. TRN - Input label. Be short as possible
#. Align Top|Middle|Bottom and Left|Center|Right
#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:94
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3930
msgid "Alignment"
msgstr "對齊"

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:95
msgid "Rear left"
msgstr ""

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:95
msgid "Front left"
msgstr ""

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:96
msgid "Front right"
msgstr ""

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:96
msgid "Rear right"
msgstr ""

#. TRN ArrangeDialog
#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:106
msgid "Geometry handling"
msgstr ""

#. TRN ArrangeDialog: Type of "Geometry handling"
#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:110
#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:122
msgid "Balanced"
msgstr ""

#. TRN ArrangeDialog: Type of "Geometry handling"
#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:112
#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:121
msgid "Accurate"
msgstr ""

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:123
msgid "Reset defaults"
msgstr ""

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:140
msgid ""
"Sequential printing is active. Arrange algorithm will use geometry of the "
"printer to optimize objects placement and avoid collisions with the gantry."
msgstr ""

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:147
#: src/slic3r/GUI/GLCanvas3D.cpp:5334 src/slic3r/GUI/KBShortcutsDialog.cpp:146
#: src/slic3r/GUI/Plater.cpp:7212
msgid "Arrange"
msgstr "佈局"

#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:150
msgid "Arrange bed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:86
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""
"%s 遇到一個錯誤，這可能由於記憶體不足所引起。若您確定系統有足夠的記憶體，那麼"
"也可能是一個軟體上的錯誤，我們非常歡迎您提出軟體錯誤報告讓我們做出修正。"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:91
#, boost-format
msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
msgstr "PrusaSlicer 遇到嚴重的錯誤 : \"%1%\""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:92
msgid ""
"Please save your project and restart PrusaSlicer. We would be glad if you "
"reported the issue."
msgstr "請儲存您的項目並重新啟動 PrusaSlicer，我們會很高興收到您回報這個錯誤。"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:221
msgid "Slicing complete"
msgstr "切片完成"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:216
#, boost-format
msgid "Masked SLA file exported to %1%"
msgstr "Masked SLA 檔案已匯出至 %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:312
msgid "Access violation"
msgstr "存取違規"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:314
msgid "Illegal instruction"
msgstr "無效的指令"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:316
msgid "Divide by zero"
msgstr "除以零"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:318
msgid "Overflow"
msgstr "溢出錯誤"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:320
msgid "Underflow"
msgstr "下溢限位"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:323
msgid "Floating reserved operand"
msgstr "浮動保留操作數"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:326
msgid "Stack overflow"
msgstr "堆疊溢出"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:685
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:752
msgid "Running post-processing scripts"
msgstr "執行後處理腳本"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:716
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:736
msgid "Unknown error occured during exporting G-code."
msgstr "匯出 G-code 期間發生未知錯誤。"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:721
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""
"將臨時的 G-code 複製到輸出的 G-code 失敗 ，也許 SD 卡寫入被鎖定？\n"
"錯誤訊息：%1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:724
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""
"將臨時 G-code 複製到輸出 G-code 時失敗。目標設備可能存在問題，請嘗試再次匯出"
"或使用不同的設備。損壞的G-code 已輸出為%1%.tmp。"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:727
#, boost-format
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""
"複製到選取之目標檔案夾的 G-code 重命名失敗。當前路徑為%1%.tmp。請再試看看匯"
"出。"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:730
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""
"臨時 G-code 的 複製已完成，但原始 G-code 因%1%在複製檢查期間無法打開。輸出 G-"
"code 為%2%.tmp。"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:733
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""
"臨時 G-code 的複制已完成，但匯出的 G-code 無法在復製檢查過程中打開。輸出 G-"
"code 為%1%.tmp。"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:741
#, boost-format
msgid "G-code file exported to %1%"
msgstr "G-code 檔案已匯出為 %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:784
#, boost-format
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr "已安排上傳到 `%1%`，請參看 視窗 -> 打印主機上傳序列"

#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/BedShapeDialog.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:243
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2128 src/slic3r/GUI/Sidebar.cpp:116
#: src/slic3r/GUI/Tab.cpp:3196
msgid "Size"
msgstr "尺寸"

#: src/slic3r/GUI/BedShapeDialog.cpp:43
msgid "Origin"
msgstr "原點"

#: src/slic3r/GUI/BedShapeDialog.cpp:60
msgid "Size in X and Y of the rectangular plate."
msgstr "矩型載台 X 和 Y 的尺寸。"

#: src/slic3r/GUI/BedShapeDialog.cpp:69
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr "0,0 G-code 座標相對於矩形左前角的距離。"

#: src/slic3r/GUI/BedShapeDialog.cpp:77
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr "載台的直徑，假定原點 (0,0) 位於載台中心。"

#: src/slic3r/GUI/BedShapeDialog.cpp:90
msgid "Rectangular"
msgstr "矩形"

#: src/slic3r/GUI/BedShapeDialog.cpp:91
msgid "Circular"
msgstr "圓形"

#: src/slic3r/GUI/BedShapeDialog.cpp:115 src/slic3r/GUI/BedShapeDialog.cpp:196
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:241
#: src/slic3r/GUI/GUI_ObjectList.cpp:1774
msgid "Shape"
msgstr "載台形狀"

#: src/slic3r/GUI/BedShapeDialog.cpp:142 src/slic3r/GUI/ConfigWizard.cpp:2043
msgid "Bed Shape"
msgstr "載台形狀"

#: src/slic3r/GUI/BedShapeDialog.cpp:220
msgid "Load shape from STL..."
msgstr "匯入載台形狀 STL 檔..."

#: src/slic3r/GUI/BedShapeDialog.cpp:267 src/slic3r/GUI/GCodeViewer.cpp:2829
#: src/slic3r/GUI/MainFrame.cpp:2351 src/slic3r/GUI/TopBar.cpp:432
msgid "Settings"
msgstr "設定"

#: src/slic3r/GUI/BedShapeDialog.cpp:291
msgid "Texture"
msgstr "材質"

#: src/slic3r/GUI/BedShapeDialog.cpp:301 src/slic3r/GUI/BedShapeDialog.cpp:374
msgid "Load..."
msgstr "匯入中..."

#: src/slic3r/GUI/BedShapeDialog.cpp:311 src/slic3r/GUI/BedShapeDialog.cpp:383
#: src/slic3r/GUI/Tab.cpp:4539 src/slic3r/GUI/UpdatesUIManager.cpp:245
msgid "Remove"
msgstr "移除"

#: src/slic3r/GUI/BedShapeDialog.cpp:337 src/slic3r/GUI/BedShapeDialog.cpp:410
msgid "Not found:"
msgstr "找不到："

#: src/slic3r/GUI/BedShapeDialog.cpp:364
msgid "Model"
msgstr "模型"

#: src/slic3r/GUI/BedShapeDialog.cpp:528
msgid "Choose an STL file to import bed shape from:"
msgstr "請選擇一個載台形狀的 STL 檔案以匯入："

#: src/slic3r/GUI/BedShapeDialog.cpp:534 src/slic3r/GUI/BedShapeDialog.cpp:580
#: src/slic3r/GUI/BedShapeDialog.cpp:602
msgid "Invalid file format."
msgstr "無效的檔案格式。"

#: src/slic3r/GUI/BedShapeDialog.cpp:551
msgid "The selected file contains no geometry."
msgstr "所選的檔案內不含幾何形狀。"

#: src/slic3r/GUI/BedShapeDialog.cpp:555
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr "所選的檔案內包含了幾個不相交區域，目前不支援這樣的類型。"

#: src/slic3r/GUI/BedShapeDialog.cpp:570
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr "請選擇一個載台外觀的材質檔案（PNG/SVG）以匯入："

#: src/slic3r/GUI/BedShapeDialog.cpp:592
msgid "Choose an STL file to import bed model from:"
msgstr "請選擇一個載台形狀的 STL 檔案以匯入："

#: src/slic3r/GUI/BonjourDialog.cpp:62
msgid "Network lookup"
msgstr "由網路查詢"

#: src/slic3r/GUI/BonjourDialog.cpp:79 src/slic3r/GUI/BonjourDialog.cpp:257
msgid "Address"
msgstr "位址"

#: src/slic3r/GUI/BonjourDialog.cpp:80
msgid "Hostname"
msgstr "主機名稱"

#: src/slic3r/GUI/BonjourDialog.cpp:81
msgid "Service name"
msgstr "伺服器名稱"

#: src/slic3r/GUI/BonjourDialog.cpp:83
msgid "OctoPrint version"
msgstr "OctoPrint 版本"

#: src/slic3r/GUI/BonjourDialog.cpp:231
msgid "Searching for devices"
msgstr "從設備中搜尋"

#: src/slic3r/GUI/BonjourDialog.cpp:238
msgid "Finished"
msgstr "已完成"

#: src/slic3r/GUI/BonjourDialog.cpp:244
msgid "Multiple resolved IP addresses"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:253
#, boost-format
msgid ""
"There are several IP addresses resolving to hostname %1%.\n"
"Please select one that should be used."
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:25
msgid "Palette 1 (default)"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:26
msgid "Palette 2"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:27
msgid "Palette 3"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:28
msgid "Palette 4"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:29
msgid "Palette 5"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:30
msgid "Palette 6"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:31
msgid "Palette 7"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:32
msgid "Palette 8"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:116
msgid "Revert color to default"
msgstr "將顏色恢復為預設值"

#: src/slic3r/GUI/ButtonsDescription.cpp:131
msgid "Value is the same as the system value"
msgstr "將設定值設為系統值"

#: src/slic3r/GUI/ButtonsDescription.cpp:132
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr "設定值已變更，與系統值或最後儲存的預設值不同"

#: src/slic3r/GUI/ButtonsDescription.cpp:159
msgid "Default palette for mode markers"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:167
msgid "Simple"
msgstr "簡單"

#: src/slic3r/GUI/ButtonsDescription.cpp:167
msgid "Expert"
msgstr "專家"

#: src/slic3r/GUI/ButtonsDescription.cpp:186
msgid "Revert color"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:204
msgid "Buttons And Text Colors Description"
msgstr "按鈕與文字顏色描述"

#: src/slic3r/GUI/ConfigManipulation.cpp:66
msgid ""
"The automatic extrusion widths calculation requires:\n"
"- Default extrusion width: 0\n"
"- First layer extrusion width: 0\n"
"- Perimeter extrusion width: 0\n"
"- External perimeter extrusion width: 0\n"
"- Infill extrusion width: 0\n"
"- Solid infill extrusion width: 0\n"
"- Top infill extrusion width: 0\n"
"- Support material extrusion width: 0"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:77
msgid ""
"Shall I adjust those settings in order to enable automatic extrusion widths "
"calculation?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:112
msgid ""
"Layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""
"無效的打印層高。\n"
"\n"
"已將打印層高重置為 0.01。"

#: src/slic3r/GUI/ConfigManipulation.cpp:124
msgid ""
"First layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""
"無效的第一層打印層高。\n"
"\n"
"已將第一層打印層高重置為 0.01。"

#: src/slic3r/GUI/ConfigManipulation.cpp:144
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Detect thin walls disabled"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:151
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr "我能為您調整這些設定用來實現螺旋花瓶打印模式嗎？"

#: src/slic3r/GUI/ConfigManipulation.cpp:152
msgid "Spiral Vase"
msgstr "螺旋花瓶打印模式"

#: src/slic3r/GUI/ConfigManipulation.cpp:183
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""
"若要與可溶性支撐一起使用擦拭塔，\n"
"支撐層必須與目標層同步。"

#: src/slic3r/GUI/ConfigManipulation.cpp:186
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr "我能為您設定同步支撐層以實現擦拭塔所需的條件嗎？"

#: src/slic3r/GUI/ConfigManipulation.cpp:187
#: src/slic3r/GUI/ConfigManipulation.cpp:205
msgid "Wipe Tower"
msgstr "擦拭塔"

#: src/slic3r/GUI/ConfigManipulation.cpp:204
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr "我能為您調整這些設定以實現擦拭塔所需的條件嗎？"

#: src/slic3r/GUI/ConfigManipulation.cpp:226
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""
"若啟用以下設定可讓支撐結果更好：\n"
" - 檢測橋接邊緣"

#: src/slic3r/GUI/ConfigManipulation.cpp:229
msgid "Shall I adjust those settings for supports?"
msgstr "我能為您作出讓支撐結果更好的設定嗎？"

#: src/slic3r/GUI/ConfigManipulation.cpp:230
msgid "Support Generator"
msgstr "支撐產生器"

#: src/slic3r/GUI/ConfigManipulation.cpp:254
#, boost-format
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr "這個 %1% 填充花紋無法使用在 100%% 的填充密度下工作。"

#: src/slic3r/GUI/ConfigManipulation.cpp:256
msgid "Shall I switch to rectilinear fill pattern?"
msgstr "我能為您切換到直線填充花紋嗎？"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
msgid "Upgrade"
msgstr "升級"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
msgid "Downgrade"
msgstr "降級"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:29
msgid "Before roll back"
msgstr "回到之前設定"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
msgid "Active"
msgstr "有效的"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64
msgid "PrusaSlicer version"
msgstr "PrusaSlicer 版本"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
msgid "filaments"
msgstr "線材"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:79 src/slic3r/GUI/Tab.cpp:1339
msgid "vendor"
msgstr "供應商"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:79
msgid "version"
msgstr "版本"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:80
msgid "min PrusaSlicer version"
msgstr "最低 PrusaSlicer 版本"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:82
msgid "max PrusaSlicer version"
msgstr "最高 PrusaSlicer 版本"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:85
msgid "model"
msgstr "模型"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:85
msgid "variants"
msgstr "變體"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:97
#, c-format, boost-format
msgid "Incompatible with this %s"
msgstr "與這個 %s 不相容"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:100
msgid "Activate"
msgstr "啟用"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:127
msgid "Configuration Snapshots"
msgstr "設定快照"

#: src/slic3r/GUI/ConfigWizard.cpp:362
msgid "nozzle"
msgstr "噴嘴"

#: src/slic3r/GUI/ConfigWizard.cpp:366
msgid "Alternate nozzles:"
msgstr "備用噴嘴："

#: src/slic3r/GUI/ConfigWizard.cpp:430
msgid "All standard"
msgstr "全部標準"

#: src/slic3r/GUI/ConfigWizard.cpp:430
msgid "Standard"
msgstr "標準"

#: src/slic3r/GUI/ConfigWizard.cpp:431 src/slic3r/GUI/ConfigWizard.cpp:871
#: src/slic3r/GUI/FileArchiveDialog.cpp:268
#: src/slic3r/GUI/FileArchiveDialog.cpp:290 src/slic3r/GUI/Preferences.cpp:578
#: src/slic3r/GUI/Tab.cpp:4628 src/slic3r/GUI/UnsavedChangesDialog.cpp:1189
msgid "All"
msgstr "全部"

#: src/slic3r/GUI/ConfigWizard.cpp:592
#, c-format, boost-format
msgid "Welcome to the %s Configuration Assistant"
msgstr "歡迎使用 %s 設定助手"

#: src/slic3r/GUI/ConfigWizard.cpp:594
#, c-format, boost-format
msgid "Welcome to the %s Configuration Wizard"
msgstr "歡迎使用 %s 設定嚮導"

#: src/slic3r/GUI/ConfigWizard.cpp:596
msgid "Welcome"
msgstr "歡迎"

#: src/slic3r/GUI/ConfigWizard.cpp:598
#, c-format, boost-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""
"您好，歡迎使用 %s！這個 %s 可以協助您進行初始設定；只需要做一些設定，您就可以"
"開始打印了。"

#: src/slic3r/GUI/ConfigWizard.cpp:603
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr "移除使用者設定檔（將會事先建立一個快照備份）"

#: src/slic3r/GUI/ConfigWizard.cpp:606
msgid ""
"Perform desktop integration (Sets this binary to be searchable by the "
"system)."
msgstr "進行桌面整合（將此二進製檔案設定為可讓系統搜尋）"

#: src/slic3r/GUI/ConfigWizard.cpp:630
msgid "Configuration sources"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:630
msgid "Configuration Sources"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:638
msgid "WARNING: Select at least one source."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:718
#, c-format, boost-format
msgid "%s Family"
msgstr "%s 的家族"

#: src/slic3r/GUI/ConfigWizard.cpp:860
msgid "Printer:"
msgstr "打印機："

#: src/slic3r/GUI/ConfigWizard.cpp:862
msgid "Vendor:"
msgstr "變種："

#: src/slic3r/GUI/ConfigWizard.cpp:863
msgid "Profile:"
msgstr "設定檔："

#: src/slic3r/GUI/ConfigWizard.cpp:957 src/slic3r/GUI/ConfigWizard.cpp:1148
#: src/slic3r/GUI/ConfigWizard.cpp:1238 src/slic3r/GUI/ConfigWizard.cpp:1383
msgid "(All)"
msgstr "（全部）"

#: src/slic3r/GUI/ConfigWizard.cpp:961 src/slic3r/GUI/ConfigWizard.cpp:1385
msgid "(Templates)"
msgstr ""

#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
#: src/slic3r/GUI/ConfigWizard.cpp:987
#, boost-format
msgid ""
"%1% visible for <b>(\"Template\")</b> printer are universal profiles "
"available for all printers. These might not be compatible with your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:987 src/slic3r/GUI/ConfigWizard.cpp:1001
#: src/slic3r/GUI/ConfigWizard.cpp:3909 src/slic3r/GUI/Tab.hpp:480
msgid "Filaments"
msgstr "線材"

#: src/slic3r/GUI/ConfigWizard.cpp:987 src/slic3r/GUI/ConfigWizard.cpp:1001
msgid "SLA materials"
msgstr "SLA 材料"

#. TRN PrusaSlicer-Medical ConfigWizard: Materials"
#: src/slic3r/GUI/ConfigWizard.cpp:996
msgid ""
"The list of validated workflows for Medical One can be found in this <a href="
"\"prusa.io/m1-validation\">article</a>. Profiles for other materials are not "
"verified by the material manufacturer and therefore may not correspond to "
"the current version of the material."
msgstr ""

#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
#: src/slic3r/GUI/ConfigWizard.cpp:1001
#, boost-format
msgid ""
"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr "標記為 <b>*</b> 的 %1% 與某些已安裝的打印機<b>不</b>相容。"

#. TRN ConfigWizard: Materials : "%1%" = "filament"/"SLA material"
#: src/slic3r/GUI/ConfigWizard.cpp:1004
#, boost-format
msgid "All installed printers are compatible with the selected %1%."
msgstr "所有安裝的打印機都與所選%1% 相容。"

#: src/slic3r/GUI/ConfigWizard.cpp:1028
msgid ""
"Only the following installed printers are compatible with the selected "
"filaments"
msgstr "只有以下安裝的打印機與所選的線材相容"

#: src/slic3r/GUI/ConfigWizard.cpp:1029
msgid ""
"Only the following installed printers are compatible with the selected SLA "
"materials"
msgstr "只有以下安裝的打印機與所選的 SLA 材料相容"

#: src/slic3r/GUI/ConfigWizard.cpp:1432
msgid ""
"You have selected template filament. Please note that these filaments are "
"available for all printers but are NOT certain to be compatible with your "
"printer. Do you still wish to have this filament selected?\n"
"(This message won't be displayed again.)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1433 src/slic3r/GUI/ConfigWizard.cpp:1941
#: src/slic3r/GUI/ConfigWizard.cpp:3046 src/slic3r/GUI/ConfigWizard.cpp:3223
#: src/slic3r/GUI/ConfigWizard.cpp:3786 src/slic3r/GUI/GUI.cpp:131
#: src/slic3r/GUI/GUI_App.cpp:3826 src/slic3r/GUI/GUI_Preview.cpp:505
#: src/slic3r/GUI/Plater.cpp:4690 src/slic3r/GUI/Plater.cpp:4768
#: src/slic3r/GUI/UpdateDialogs.cpp:215 src/slic3r/GUI/UpdateDialogs.cpp:223
#: src/slic3r/GUI/UpdateDialogs.cpp:228 src/slic3r/GUI/UpdateDialogs.cpp:233
#: src/slic3r/GUI/UpdateDialogs.cpp:240 src/slic3r/GUI/UpdateDialogs.cpp:245
msgid "Notice"
msgstr "注意"

#: src/slic3r/GUI/ConfigWizard.cpp:1478
msgid "Custom Printer Setup"
msgstr "自訂打印機設定"

#: src/slic3r/GUI/ConfigWizard.cpp:1478
msgid "Custom Printer"
msgstr "自訂打印機"

#: src/slic3r/GUI/ConfigWizard.cpp:1480
msgid "Define a custom printer profile"
msgstr "定義一個自訂打印機設定檔"

#: src/slic3r/GUI/ConfigWizard.cpp:1481
msgid "Custom profile name:"
msgstr "自訂設定檔名稱："

#: src/slic3r/GUI/ConfigWizard.cpp:1498
msgid "Automatic updates"
msgstr "自動更新"

#: src/slic3r/GUI/ConfigWizard.cpp:1498
msgid "Updates"
msgstr "更新"

#: src/slic3r/GUI/ConfigWizard.cpp:1505
msgid "Check for application updates"
msgstr "檢查套用程式更新"

#: src/slic3r/GUI/ConfigWizard.cpp:1509
#, c-format, boost-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"啟用此功能時，%s 將會連線檢查新的套用程式版本。 當有新的版本可用時，下次套用"
"程式啟動時會顯示通知（但不會在使用期間顯示）。 這只是一個通知機制，並不會自動"
"安裝。"

#: src/slic3r/GUI/ConfigWizard.cpp:1515 src/slic3r/GUI/Preferences.cpp:344
msgid "Update built-in Presets automatically"
msgstr "自動更新內建預設"

#: src/slic3r/GUI/ConfigWizard.cpp:1519
#, c-format, boost-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"如果啟用，%s 會在背景進行。這些更新被下載到一個單獨的臨時位置。當一個新的預設"
"版本可用時，它會在套用程式啟動後提供使用。"

#: src/slic3r/GUI/ConfigWizard.cpp:1522
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr "未經使用者同意將不會套用更新，且也不會覆蓋使用者的自定義設定。"

#: src/slic3r/GUI/ConfigWizard.cpp:1527
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr "此外，在套用更新之前，也會建立一個完整的設定快照備份。"

#: src/slic3r/GUI/ConfigWizard.cpp:1576 src/slic3r/GUI/Preferences.cpp:1167
msgid "Download path"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1581 src/slic3r/GUI/FirmwareDialog.cpp:819
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:397
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:488
msgid "Browse"
msgstr "瀏覽"

#: src/slic3r/GUI/ConfigWizard.cpp:1587
msgid "Choose folder"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1625
msgid "Downloads from URL"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1625
msgid "Downloads"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1633
msgid "Allow built-in downloader"
msgstr ""

#. TRN ConfigWizard : Downloader : %1% = "printables.com", %2% = "PrusaSlicer"
#: src/slic3r/GUI/ConfigWizard.cpp:1658
#, boost-format
msgid ""
"If enabled, you will be able to open models from the %1% online database "
"with a single click (using a %2% logo button)."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1679
msgid ""
"On Linux systems the process of registration also creates desktop "
"integration files for this version of application."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1708
msgid "Chosen directory for downloads does not exist."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1799 src/slic3r/GUI/GUI_Factories.cpp:906
#: src/slic3r/GUI/Plater.cpp:2928
msgid "Reload from disk"
msgstr "重新匯入磁碟機中的檔案"

#: src/slic3r/GUI/ConfigWizard.cpp:1802
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr "將模型與來源零件完整路徑一起匯出為3MF和AMF檔案"

#: src/slic3r/GUI/ConfigWizard.cpp:1806
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""
"如果啟用，則允許從磁碟機重新匯入命令在調用時自動檢查和匯入檔案。若未啟用，從"
"磁碟機重新匯入時將會以檔案對話框的方式讓您選擇每個檔案。"

#: src/slic3r/GUI/ConfigWizard.cpp:1815
msgid "Files association"
msgstr "檔案關聯"

#: src/slic3r/GUI/ConfigWizard.cpp:1817 src/slic3r/GUI/Preferences.cpp:330
msgid "Associate .3mf files to PrusaSlicer"
msgstr "將 .3mf 檔案關聯至 PrusaSlicer"

#: src/slic3r/GUI/ConfigWizard.cpp:1818 src/slic3r/GUI/Preferences.cpp:335
msgid "Associate .stl files to PrusaSlicer"
msgstr "將 .stl 檔案關聯至 PrusaSlicer"

#: src/slic3r/GUI/ConfigWizard.cpp:1828
msgid "View mode"
msgstr "觀看模式"

#: src/slic3r/GUI/ConfigWizard.cpp:1830
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""
"Prusaslicer的使用者介面有三個變體：\\ n簡單，高級和專家。\\ n簡單模式僅顯示與"
"一般3D打印相關的最常用設定。 另外兩個提供了更複雜的微調，分別適合高級和專家使"
"用者。"

#: src/slic3r/GUI/ConfigWizard.cpp:1835
msgid "Simple mode"
msgstr "簡單模式"

#: src/slic3r/GUI/ConfigWizard.cpp:1836
msgid "Advanced mode"
msgstr "高級模式"

#: src/slic3r/GUI/ConfigWizard.cpp:1837 src/slic3r/GUI/TopBarMenus.cpp:34
msgid "Expert mode"
msgstr "專家模式"

#: src/slic3r/GUI/ConfigWizard.cpp:1850
msgid "The size of the object can be specified in inches"
msgstr "模型的大小也可以指定使用英吋單位"

#: src/slic3r/GUI/ConfigWizard.cpp:1851
msgid "Use inches"
msgstr "使用英吋單位"

#: src/slic3r/GUI/ConfigWizard.cpp:1884
#, c-format, boost-format
msgid "Pick another vendor supported by %s"
msgstr "選擇另一個由 %s 支援的供應商"

#: src/slic3r/GUI/ConfigWizard.cpp:1933
#, boost-format
msgid ""
"Existing user preset '%2%' has the same name as one of new system presets "
"from vendor '%1%'.\n"
"Please note that this user preset will be rewritten by the system preset.\n"
"\n"
"Do you still wish to add presets from vendor '%1%'?"
msgid_plural ""
"Existing user presets (%2%) have the same names as some of new system "
"presets from vendor '%1%'.\n"
"Please note that these user presets will be rewritten by the system "
"presets.\n"
"\n"
"Do you still wish to add presets from vendor '%1%'?"
msgstr[0] ""

#: src/slic3r/GUI/ConfigWizard.cpp:1965
msgid "Firmware Type"
msgstr "韌體類型"

#: src/slic3r/GUI/ConfigWizard.cpp:1965 src/slic3r/GUI/Tab.cpp:2745
msgid "Firmware"
msgstr "韌體"

#: src/slic3r/GUI/ConfigWizard.cpp:1969
msgid "Choose the type of firmware used by your printer."
msgstr "選擇打印機使用的韌體類型。"

#: src/slic3r/GUI/ConfigWizard.cpp:2018 src/slic3r/GUI/ConfigWizard.cpp:2090
#: src/slic3r/GUI/ConfigWizard.cpp:2095 src/slic3r/GUI/ConfigWizard.cpp:2100
#: src/slic3r/GUI/Field.cpp:281 src/slic3r/GUI/Field.cpp:356
#: src/slic3r/GUI/Field.cpp:1642 src/slic3r/GUI/GUI_ObjectLayers.cpp:439
msgid "Invalid numeric input."
msgstr "輸入的數值無效。"

#: src/slic3r/GUI/ConfigWizard.cpp:2043
msgid "Bed Shape and Size"
msgstr "打印機載台尺寸"

#: src/slic3r/GUI/ConfigWizard.cpp:2046
msgid "Set the shape of your printer's bed."
msgstr "設定打印機載台的形狀。"

#. TRN ConfigWizard : Size of possible print, related on printer size
#: src/slic3r/GUI/ConfigWizard.cpp:2067
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2382
msgid "Build Volume"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2070
msgid "Set the printer height."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2125
msgid "Filament and Nozzle Diameters"
msgstr "線材與噴嘴直徑"

#: src/slic3r/GUI/ConfigWizard.cpp:2125
msgid "Print Diameters"
msgstr "打印直徑"

#: src/slic3r/GUI/ConfigWizard.cpp:2140
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "輸入打印機熱端噴嘴的直徑。"

#: src/slic3r/GUI/ConfigWizard.cpp:2143
msgid "Nozzle Diameter"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2153
msgid "Enter the diameter of your filament."
msgstr "輸入線材的直徑。"

#: src/slic3r/GUI/ConfigWizard.cpp:2154
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"因為需要良好的精度，請使用游標卡尺沿著線材進行多個測量，然後計算平均值。"

#: src/slic3r/GUI/ConfigWizard.cpp:2157
msgid "Filament Diameter"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2212
msgid "Nozzle and Bed Temperatures"
msgstr "噴嘴與載台的溫度"

#: src/slic3r/GUI/ConfigWizard.cpp:2212
msgid "Temperatures"
msgstr "溫度"

#: src/slic3r/GUI/ConfigWizard.cpp:2228
msgid "Enter the temperature needed for extruding your filament."
msgstr "輸入擠出線材時所需的溫度。"

#: src/slic3r/GUI/ConfigWizard.cpp:2229
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "一般而言 PLA 是 160°C 至230°C， ABS 則是 215°C至 250°C。"

#: src/slic3r/GUI/ConfigWizard.cpp:2232
msgid "Extrusion Temperature:"
msgstr "擠出溫度："

#: src/slic3r/GUI/ConfigWizard.cpp:2242
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr "輸入線材可以黏在載台所需的溫度。"

#: src/slic3r/GUI/ConfigWizard.cpp:2243
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""
"一般而言 PLA 是 60°C， ABS 則是 110°C。若您的打印機沒有加熱載台的功能，則留"
"下 0 不需輸入。"

#: src/slic3r/GUI/ConfigWizard.cpp:2246
msgid "Bed Temperature"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2843
msgid "FFF Technology Printers"
msgstr "FFF 技術打印機"

#: src/slic3r/GUI/ConfigWizard.cpp:2852
msgid "SLA Technology Printers"
msgstr "SLA 技術打印機"

#: src/slic3r/GUI/ConfigWizard.cpp:3044
#, boost-format
msgid ""
"Following printer profiles has no default filament: %1%Please select one "
"manually."
msgstr "下列打印機設定檔沒有預設線材：%1%，請手動選擇一個。"

#: src/slic3r/GUI/ConfigWizard.cpp:3045
#, boost-format
msgid ""
"Following printer profiles has no default material: %1%Please select one "
"manually."
msgstr "下列打印機設定檔沒有預設材料： %1%，請手動選擇一個。"

#: src/slic3r/GUI/ConfigWizard.cpp:3246
msgid "The following FFF printer models have no filament selected:"
msgstr "以下 FFF 打印機模式未選擇線材："

#: src/slic3r/GUI/ConfigWizard.cpp:3250
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr "您是否要為這些FFF打印機模式選擇預設的線材？"

#: src/slic3r/GUI/ConfigWizard.cpp:3264
msgid "The following SLA printer models have no materials selected:"
msgstr "以下SLA打印機模式沒有選擇材料："

#: src/slic3r/GUI/ConfigWizard.cpp:3268
msgid "Do you want to select default SLA materials for these printer models?"
msgstr "您是否要為這些SLA打印機模式選擇預設的打印材料？"

#: src/slic3r/GUI/ConfigWizard.cpp:3310
msgid "Configuration is edited in ConfigWizard"
msgstr "在設定嚮導中編輯設定"

#: src/slic3r/GUI/ConfigWizard.cpp:3364
msgid ""
"It's impossible to print object(s) which contains parameter modifiers with "
"SLA technology.\n"
"\n"
"SLA-printer preset will not be selected"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3369
msgid "All user presets will be deleted."
msgstr "所有使用者預設將被刪除。"

#: src/slic3r/GUI/ConfigWizard.cpp:3406
msgid "A new vendor was installed and one of its printers will be activated"
msgid_plural ""
"New vendors were installed and one of theirs printers will be activated"
msgstr[0] "安裝了一個新供應商，其中一台打印機將被啟用"

#: src/slic3r/GUI/ConfigWizard.cpp:3438
msgid "Do you want to continue changing the configuration?"
msgstr "您要繼續變更設定嗎？"

#: src/slic3r/GUI/ConfigWizard.cpp:3504
msgid "A new Printer was installed and it will be activated."
msgstr "已安裝新的打印機且已經啟用。"

#: src/slic3r/GUI/ConfigWizard.cpp:3509
msgid "Some Printers were uninstalled."
msgstr "一些打印機被移除。"

#: src/slic3r/GUI/ConfigWizard.cpp:3530
msgid "A new filament was installed and it will be activated."
msgstr "已安裝一個新的線材且已經啟用。"

#: src/slic3r/GUI/ConfigWizard.cpp:3531
msgid "A new SLA material was installed and it will be activated."
msgstr "已安裝一個新的打印材料且已經啟用。"

#: src/slic3r/GUI/ConfigWizard.cpp:3544
msgid "Some filaments were uninstalled."
msgstr "一些線材被移除。"

#: src/slic3r/GUI/ConfigWizard.cpp:3544
msgid "Some SLA materials were uninstalled."
msgstr "一些打 SLA 材料被移除。"

#: src/slic3r/GUI/ConfigWizard.cpp:3618
msgid "Custom printer was installed and it will be activated."
msgstr "已安裝了自定義打印機且已經啟用。"

#. TRN: Progress dialog title
#: src/slic3r/GUI/ConfigWizard.cpp:3691 src/slic3r/GUI/ConfigWizard.cpp:4145
msgid "Updating Configuration sources"
msgstr ""

#. TRN: %1% contains list of pages to be removed, each on its own line and ending with a line break.
#: src/slic3r/GUI/ConfigWizard.cpp:3782
#, boost-format
msgid ""
"Following Configuration Wizard pages will be removed after the configuration "
"update:\n"
"\n"
"%1%\n"
"Installed presets for the respective printers will also be removed.\n"
"Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3909
msgid "Filament Profiles Selection"
msgstr "線材設定檔選擇"

#: src/slic3r/GUI/ConfigWizard.cpp:3909 src/slic3r/GUI/ConfigWizard.cpp:3912
#: src/slic3r/GUI/GUI_ObjectList.cpp:4325
msgid "Type:"
msgstr "類型："

#: src/slic3r/GUI/ConfigWizard.cpp:3912
msgid "SLA Material Profiles Selection"
msgstr "SLA 材料設定檔選擇"

#: src/slic3r/GUI/ConfigWizard.cpp:3912
msgid "SLA Materials"
msgstr "SLA 材質"

#: src/slic3r/GUI/ConfigWizard.cpp:3961
msgid "Select all standard printers"
msgstr "選擇所有標準打印機"

#: src/slic3r/GUI/ConfigWizard.cpp:3964
msgid "< &Back"
msgstr "< (&B)後退"

#: src/slic3r/GUI/ConfigWizard.cpp:3965
msgid "&Next >"
msgstr "(&N)下一步 >"

#: src/slic3r/GUI/ConfigWizard.cpp:3966
msgid "&Finish"
msgstr "(&F)完成"

#: src/slic3r/GUI/ConfigWizard.cpp:3967
#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:767
#: src/slic3r/GUI/FileArchiveDialog.cpp:281
#: src/slic3r/GUI/FileArchiveDialog.cpp:290
#: src/slic3r/GUI/FirmwareDialog.cpp:157
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2365
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2011
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2096
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:71
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1391
#: src/slic3r/GUI/ProgressStatusBar.cpp:34
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:100
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:934
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
msgid "Cancel"
msgstr "取消"

#: src/slic3r/GUI/ConfigWizard.cpp:4158
msgid "Configuration Assistant"
msgstr "設定助手"

#: src/slic3r/GUI/ConfigWizard.cpp:4159
msgid "Configuration &Assistant"
msgstr "設定助手(&A)"

#: src/slic3r/GUI/ConfigWizard.cpp:4161
msgid "Configuration Wizard"
msgstr "設定嚮導"

#: src/slic3r/GUI/ConfigWizard.cpp:4162
msgid "Configuration &Wizard"
msgstr "設定嚮導(&W)"

#. TRN Config wizard page headline.
#: src/slic3r/GUI/ConfigWizardWebViewPage.cpp:22
msgid "Log in with Your Prusa Account (optional)"
msgstr ""

#: src/slic3r/GUI/ConfigWizardWebViewPage.cpp:22
msgid "Log in (optional)"
msgstr ""

#. TRN Config wizard page with a log in page.
#: src/slic3r/GUI/ConfigWizardWebViewPage.cpp:33
msgid "Failed to load a web browser. Logging in is not possible in the moment."
msgstr ""

#. TRN Config wizard page with a log in web.
#: src/slic3r/GUI/ConfigWizardWebViewPage.cpp:41
#: src/slic3r/GUI/ConfigWizardWebViewPage.cpp:68
#, boost-format
msgid "You are logged as %1%."
msgstr ""

#. TRN Config wizard page with a log in web. first line of text.
#: src/slic3r/GUI/ConfigWizardWebViewPage.cpp:44
#: src/slic3r/GUI/ConfigWizardWebViewPage.cpp:71
msgid ""
"Log in to control your printers remotely through the built-in Connect in "
"PrusaSlicer."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:256
msgid ""
"Performing desktop integration failed - boost::filesystem::canonical did not "
"return appimage path."
msgstr "執行桌面整合失敗-boost :: filesystem :: Canonical 沒有返回附屬路徑。"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:267
msgid "Performing desktop integration failed - Could not find executable."
msgstr "執行桌面整合失敗 - 找不到可執行檔。"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:407
msgid ""
"Performing desktop integration failed because the application directory was "
"not found."
msgstr "由於找不到套用程式目錄，因此執行桌面整合失敗了。"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:447
msgid ""
"Performing desktop integration failed - could not create Gcodeviewer desktop "
"file. PrusaSlicer desktop file was probably created successfully."
msgstr ""
"執行桌面整合失敗 - 無法建立 GcodeViewer 桌面檔案。但 Prusaslicer 桌面檔案可能"
"成功建立了。"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:497
msgid ""
"Performing downloader desktop integration failed - boost::filesystem::"
"canonical did not return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:509
msgid ""
"Performing downloader desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:627
msgid ""
"Performing downloader desktop integration failed because the application "
"directory was not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:736
#: src/slic3r/GUI/GUI_App.cpp:2731
msgid "Desktop Integration"
msgstr "桌面整合"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:743
msgid ""
"Desktop Integration sets this binary to be searchable by the system.\n"
"\n"
"Press \"Perform\" to proceed."
msgstr ""
"桌面整合已設定了二進位檔案，者二進位檔案可以由系統搜尋。\n"
"\n"
"請按 \"實行\" 來進行。"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:757
msgid "Perform"
msgstr "實行"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:763
#: src/slic3r/GUI/GLCanvas3D.cpp:5513 src/slic3r/GUI/KBShortcutsDialog.cpp:111
#: src/slic3r/GUI/MainFrame.cpp:1623
msgid "Undo"
msgstr "取消"

#: src/slic3r/GUI/TickCodesManager.cpp:39
msgid "Place bearings in slots and resume printing"
msgstr "將軸承放入插槽中並恢復打印"

#: src/slic3r/GUI/TickCodesManager.cpp:147
msgid "This action will cause deletion of all ticks on vertical slider."
msgstr "此操作將導致刪除所有垂直滑塊上的所有刻度。"

#: src/slic3r/GUI/TickCodesManager.cpp:148 src/slic3r/GUI/Tab.cpp:1291
msgid ""
"This action is not revertible.\n"
"Do you want to proceed?"
msgstr ""
"進行此操作後將不可恢復。\n"
"您確定要繼續嗎？"

#: src/slic3r/GUI/TickCodesManager.cpp:293
msgid "The last color change data was saved for a single extruder printing."
msgstr "為單個擠出機之打印儲存最後一次的換色資料。"

#: src/slic3r/GUI/TickCodesManager.cpp:294
#: src/slic3r/GUI/TickCodesManager.cpp:308
msgid "The last color change data was saved for a multi extruder printing."
msgstr "為多台擠出機之打印儲存最後一次的換色資料。"

#: src/slic3r/GUI/TickCodesManager.cpp:296
msgid "Your current changes will delete all saved color changes."
msgstr "您當前的變更將刪除所有已儲存的顏色變更。"

#: src/slic3r/GUI/TickCodesManager.cpp:297
#: src/slic3r/GUI/TickCodesManager.cpp:316
msgid "Are you sure you want to continue?"
msgstr "你確定你要繼續嗎？"

#: src/slic3r/GUI/TickCodesManager.cpp:309
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""
"如果要刪除所有已儲存的工具變更，請選擇是，\n"
"如果您希望所有工具變更都切換為顏色變更，請選擇否，\n"
"或取消以保持不變。"

#: src/slic3r/GUI/TickCodesManager.cpp:312
msgid "Do you want to delete all saved tool changes?"
msgstr "您要刪除所有已儲存的工具變更嗎？"

#: src/slic3r/GUI/TickCodesManager.cpp:314
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr "最後的顏色變更資料將被儲存用於多擠出機打印，整個打印都需要取代工具。"

#: src/slic3r/GUI/TickCodesManager.cpp:315
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr "您當前的變更將刪除所有已儲存的擠出機（工具）變更。"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:646
msgid "Add Color Change"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:653
msgid "Add Pause"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:656
msgid "Add Custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:660
msgid "Add Custom Template"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:668
#: src/slic3r/GUI/DoubleSliderForLayers.cpp:718
#, boost-format
msgid "Add color change (%1%) for:"
msgstr "添加顏色變更到 (%1%) ："

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:696
msgid "Switch code to Change extruder"
msgstr "切換代碼以變更擠出機"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:696
#: src/slic3r/GUI/GUI_Factories.cpp:920
msgid "Change extruder"
msgstr "變更擠出機"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:701
#: src/slic3r/GUI/DoubleSliderForLayers.cpp:725
#: src/slic3r/GUI/GUI_Factories.cpp:958
#, c-format, boost-format
msgid "Extruder %d"
msgstr "擠出機 %d"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:703
#: src/slic3r/GUI/GUI_Factories.cpp:959
msgid "active"
msgstr "啟用"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:717
#, boost-format
msgid "Switch code to Color change (%1%) for:"
msgstr "將代碼切換到顏色變更 (%1%)："

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:727
msgid "used"
msgstr "用過的"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:768
#: src/slic3r/GUI/DoubleSliderForLayers.cpp:906
msgid "Jump to height"
msgstr "跳至高度"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:771
msgid "Show estimated print time on hover"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:776
#: src/slic3r/GUI/Preferences.cpp:520
msgid "Sequential slider applied only to top layer"
msgstr "順序滑塊僅應用於頂層"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:782
msgid "Set extruder sequence for the entire print"
msgstr "為整個打印設定擠出機順序"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:786
msgid "Ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:787
msgid "Show"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:795
msgid "Show background"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:804
msgid "Use default colors"
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:809
msgid "Set auto color changes"
msgstr "設定自動顏色變化"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:833
msgid "Edit color"
msgstr "編輯顏色"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:834
msgid "Edit pause print message"
msgstr "編輯暫停打印訊息"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:835
msgid "Edit custom G-code"
msgstr "編輯自定義 G-code"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:850
msgid "Delete color change"
msgstr "刪除顏色變更"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:851
msgid "Delete tool change"
msgstr "刪除工具變更"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:852
msgid "Delete pause print"
msgstr "刪除暫停打印"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:853
msgid "Delete custom G-code"
msgstr "刪除自定義 G-code"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:905
msgid "Enter the height you want to jump to"
msgstr "輸入你想跳到的高度"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1022
#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1181
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing sequentually."
msgstr ""
"已經開啟順序打印。\n"
"接下來無法將任何自定義 G-code 套用於模型的打印。"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1155
msgid "One layer mode"
msgstr "單層模式"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1157
msgid "Discard all custom changes"
msgstr "放棄所有的自定義變更"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1161
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""
"跳轉到高度 %s\n"
"設定標尺模式\n"
"或為整個打印設定擠出機順序"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1164
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""
"跳轉到高度 %s\n"
"或設定標尺模式"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1169
msgid "Edit current color - Right click the colored slider segment"
msgstr "編輯當前顏色 - 右鍵單擊彩色滑塊"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1171
msgid "This is wipe tower layer"
msgstr "這是擦拭塔的層"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1185
msgid "Print mode"
msgstr "打印模式"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1199
msgid "Add extruder change - Left click"
msgstr "添加擠出機的變更-左鍵單擊"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1201
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""
"添加顏色變更 - 滑鼠左鍵添加預設的顏色，或 Shift +滑鼠左鍵 選擇自定義顏色"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1203
msgid "Add color change - Left click"
msgstr "添加顏色變更-滑鼠左鍵"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1204
msgid "or press \"+\" key"
msgstr "或按 \"+\" 鍵"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1206
msgid "Add another code - Ctrl + Left click"
msgstr "添加另一個代碼 - 按 Ctrl + 滑鼠左鍵"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1207
msgid "Add another code - Right click"
msgstr "添加另一個代碼 - 按 滑鼠右鍵"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1213
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""
"已經開啟順序打印。\n"
"接下來無法將任何自定義 G-code 套用於模型的打印。\n"
"那個代碼將不會在 G-code 產生的時候被處理。"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1231
msgid "continue"
msgstr "繼續"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1239
#, boost-format
msgid "Color change (\"%1%\")"
msgstr "顏色變更 (\"%1%\")"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1240
#, boost-format
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr "將顏色變更 (\"%1%\") 到擠出機 %2%"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1242
#, boost-format
msgid "Pause print (\"%1%\")"
msgstr "暫停打印 (\"%1%\")"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1244
#, boost-format
msgid "Custom template (\"%1%\")"
msgstr "自定義模板(\"%1%\")"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1246
#, boost-format
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr "將當前擠出機（工具）變更為擠出機 \"%1%\""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1253
msgid "Note"
msgstr "備註"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1255
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""
"與此刻度線標記關聯的 G-code 與打印模式發生衝突。\n"
"編輯它將會導致滑塊資訊變更。"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1258
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""
"擠出機有顏色變更，直到打印作業結束才會使用。\n"
"在 G-code 產生期間不會處理此代碼。"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1261
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""
"擠出機變更設定為同一擠出機。\n"
"在 G-code 產生期間不會處理此代碼。"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1264
msgid ""
"There is an extruder change set to a non-existing extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1267
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""
"擠出機有一個以前沒有使用過的顏色變更。\n"
"檢查您的設定以避免多餘的顏色變更。"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1272
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr "刪除刻度線標記 - 左鍵單擊或按 \"-\" 鍵"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1274
msgid "Edit tick mark - Ctrl + Left click"
msgstr "編輯刻度線標記-按 Ctrl + 滑鼠左鍵"

#: src/slic3r/GUI/DoubleSliderForLayers.cpp:1275
msgid "Edit tick mark - Right click"
msgstr "編輯刻度線標記-按 滑鼠右鍵"

#: src/slic3r/GUI/Downloader.cpp:160 src/slic3r/GUI/Downloader.cpp:181
#, boost-format
msgid ""
"Download won't start. Download URL doesn't point to https://printables.com : "
"%1%"
msgstr ""

#: src/slic3r/GUI/Downloader.cpp:215
msgid "The download has failed"
msgstr ""

#. TRN %1% = file path
#: src/slic3r/GUI/DownloaderFileGet.cpp:181 src/slic3r/Utils/AppUpdater.cpp:231
#: src/slic3r/Utils/AppUpdater.cpp:282
#, boost-format
msgid "Can't create file at %1%"
msgstr ""

#. TRN: This is title of a dialog. The argument is the name of the currently edited custom G-code.
#: src/slic3r/GUI/EditGCodeDialog.cpp:38
#, boost-format
msgid "Edit Custom G-code (%1%)"
msgstr ""

#. TRN this word-combination is a part of phraze "For more information about placeholders and its use visit our help page"
#: src/slic3r/GUI/EditGCodeDialog.cpp:59
msgid "help page"
msgstr ""

#. TRN ConfigWizard : Downloader : %1% = "help page"
#: src/slic3r/GUI/EditGCodeDialog.cpp:62
#, boost-format
msgid "For more information about placeholders and its use visit our %1%."
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:79
msgid "Built-in placeholders (Double click item to add to G-code)"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:89
msgid "Add selected placeholder to G-code"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:108
msgid "Select placeholder"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:163
msgid "[Global] Slicing state"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:165
msgid "Read only"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:171
msgid "Read write"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:179
msgid "Slicing state"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:190
msgid "Print statistics"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:198
msgid "Objects info"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:206
msgid "Dimensions"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:214
msgid "Timestamps"
msgstr ""

#. TRN: The argument is the name of currently edited custom gcode. The string starts a section of placeholders only available in this gcode.
#: src/slic3r/GUI/EditGCodeDialog.cpp:224
#, boost-format
msgid "Specific for %1%"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:255
msgid "Presets"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:257 src/slic3r/GUI/GCodeViewer.cpp:2846
#: src/slic3r/GUI/GUI.cpp:214 src/slic3r/GUI/Sidebar.cpp:403
msgid "Print settings"
msgstr "打印設定"

#: src/slic3r/GUI/EditGCodeDialog.cpp:262
msgid "Filament settings"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:262
msgid "SLA Materials settings"
msgstr ""

#: src/slic3r/GUI/EditGCodeDialog.cpp:267
msgid "Printer settings"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:31
msgid "Set extruder sequence"
msgstr "設定擠出機順序"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:51
msgid "Set extruder change for every"
msgstr "設定每個擠出機變更"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:169
msgid "Random sequence"
msgstr "隨機順序"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:171
msgid "If enabled, random sequence of the selected extruders will be used."
msgstr "如果啟用，將以隨機的方式使用擠出機。"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
msgid "Allow next color repetition"
msgstr "允許下一個可以顏色重複"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:179
msgid "If enabled, a repetition of the next random color will be allowed."
msgstr "如果啟用，將允許下一個隨機的顏色重複。"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
msgid "Set extruder(tool) sequence"
msgstr "設定擠出機（工具）順序"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:234
msgid "Remove extruder from sequence"
msgstr "從序列中刪除擠出機"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:244
msgid "Add extruder to sequence"
msgstr "將擠出機添加到序列"

#: src/slic3r/GUI/Field.cpp:211
msgid "default value"
msgstr "預設值"

#: src/slic3r/GUI/Field.cpp:214
msgid "parameter name"
msgstr "參數名稱"

#: src/slic3r/GUI/Field.cpp:229 src/slic3r/GUI/GCodeViewer.cpp:487
#: src/slic3r/GUI/GCodeViewer.cpp:497 src/slic3r/GUI/GCodeViewer.cpp:507
#: src/slic3r/GUI/GCodeViewer.cpp:522 src/slic3r/GUI/GCodeViewer.cpp:532
#: src/slic3r/GUI/GCodeViewer.cpp:542 src/slic3r/GUI/OptionsGroup.cpp:180
#: src/slic3r/GUI/OptionsGroup.cpp:1007 src/slic3r/GUI/OptionsGroup.cpp:1018
#: src/slic3r/GUI/OptionsGroup.cpp:1028
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1102
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
msgid "N/A"
msgstr "N/A"

#: src/slic3r/GUI/Field.cpp:252 src/slic3r/GUI/Field.cpp:327
#, c-format, boost-format
msgid "%s doesn't support percentage"
msgstr "%s 不適合使用百分比表示"

#: src/slic3r/GUI/Field.cpp:292
#, c-format, boost-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""
"輸入值超出範圍\n"
"您確定 %s 的值正確並且要繼續嗎？"

#: src/slic3r/GUI/Field.cpp:295 src/slic3r/GUI/Field.cpp:376
msgid "Parameter validation"
msgstr "參數驗證"

#: src/slic3r/GUI/Field.cpp:309 src/slic3r/GUI/Field.cpp:397
#: src/slic3r/GUI/Field.cpp:1654
msgid "Input value is out of range"
msgstr "輸入值超出範圍"

#. TRN %1% = Value, %2% = units
#: src/slic3r/GUI/Field.cpp:373
#, boost-format
msgid ""
"Do you mean %1%%% instead of %1% %2%?\n"
"Select YES if you want to change this value to %1%%%, \n"
"or NO if you are sure that %1% %2% is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:393
#, boost-format
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr "輸入格式無效。預期向量應使用以下格式：“%1%”"

#: src/slic3r/GUI/Field.cpp:402
msgid "Some extension in the input is invalid"
msgstr ""

#: src/slic3r/GUI/FileArchiveDialog.cpp:174
msgid "Archive preview"
msgstr ""

#: src/slic3r/GUI/FileArchiveDialog.cpp:277
#: src/slic3r/GUI/FileArchiveDialog.cpp:290
msgid "Open"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:156
msgid "Flash!"
msgstr "燒錄中！"

#: src/slic3r/GUI/FirmwareDialog.cpp:158
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "正在燒錄中。請不要中斷打印機連線！"

#: src/slic3r/GUI/FirmwareDialog.cpp:205
msgid "Flashing failed"
msgstr "燒錄錯誤"

#: src/slic3r/GUI/FirmwareDialog.cpp:287
msgid "Flashing succeeded!"
msgstr "燒錄完成！"

#: src/slic3r/GUI/FirmwareDialog.cpp:288
msgid "Flashing failed. Please see the avrdude log below."
msgstr "燒錄失敗。請參閱下面的 avrdude 日誌。"

#: src/slic3r/GUI/FirmwareDialog.cpp:289
msgid "Flashing cancelled."
msgstr "已取消燒錄。"

#: src/slic3r/GUI/FirmwareDialog.cpp:337
#, c-format, boost-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"此韌體的 hex 檔案與打印機型號不符。\n"
"hex 檔案用於：%s\n"
"打印機報告：%s\n"
"\n"
"是否要繼續並更新此十六進位檔案？\n"
"請務必在您非常確定這是正確的做法時才繼續。"

#: src/slic3r/GUI/FirmwareDialog.cpp:424 src/slic3r/GUI/FirmwareDialog.cpp:459
#, c-format, boost-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr "找到多個 %s 設備。請一次只連接一個以進行燒錄。"

#: src/slic3r/GUI/FirmwareDialog.cpp:441
#, c-format, boost-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"找不到 %s 設備。\n"
"如果設備已連接, 請按 USB 連接器旁邊的 \"重置\" 按鈕。"

#: src/slic3r/GUI/FirmwareDialog.cpp:553
#, c-format, boost-format
msgid "The %s device could not have been found"
msgstr "找不到 %s 設備"

#: src/slic3r/GUI/FirmwareDialog.cpp:654
#, c-format, boost-format
msgid "Error accessing port at %s: %s"
msgstr "在 %s 接駁通訊埠時出錯：%s"

#: src/slic3r/GUI/FirmwareDialog.cpp:656
#, c-format, boost-format
msgid "Error: %s"
msgstr "錯誤: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:791
msgid "Firmware flasher"
msgstr "韌體燒錄"

#: src/slic3r/GUI/FirmwareDialog.cpp:816
msgid "Firmware image:"
msgstr "韌體影像檔："

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Select a file"
msgstr "選擇一個檔案"

#: src/slic3r/GUI/FirmwareDialog.cpp:822
msgid "Serial port:"
msgstr "序列埠："

#: src/slic3r/GUI/FirmwareDialog.cpp:824
msgid "Autodetected"
msgstr "自動檢測"

#. TRN Text of button to rescan visible networks in Wifi Config dialog.
#. TRN Text of button to rescan connect usb drives in Wifi Config dialog.
#: src/slic3r/GUI/FirmwareDialog.cpp:825 src/slic3r/GUI/WifiConfigDialog.cpp:69
#: src/slic3r/GUI/WifiConfigDialog.cpp:97
msgid "Rescan"
msgstr "重新掃描"

#: src/slic3r/GUI/FirmwareDialog.cpp:833
msgid "Progress:"
msgstr "進度："

#: src/slic3r/GUI/FirmwareDialog.cpp:836
msgid "Status:"
msgstr "狀態："

#: src/slic3r/GUI/FirmwareDialog.cpp:837
msgid "Ready"
msgstr "準備就緒"

#: src/slic3r/GUI/FirmwareDialog.cpp:857
msgid "Advanced: Output log"
msgstr "進階：輸出日誌"

#: src/slic3r/GUI/FirmwareDialog.cpp:868
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:346
#: src/slic3r/GUI/Mouse3DController.cpp:548
#: src/slic3r/GUI/PrintHostDialogs.cpp:317
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:129
msgid "Close"
msgstr "結束"

#: src/slic3r/GUI/FirmwareDialog.cpp:923
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"您確定要取消韌體的燒錄嗎？\n"
"這可能會讓您的打印機處於無法使用的狀態！"

#: src/slic3r/GUI/FirmwareDialog.cpp:924
msgid "Confirmation"
msgstr "確認"

#: src/slic3r/GUI/FirmwareDialog.cpp:927
msgid "Cancelling..."
msgstr "取消中..."

#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:117
msgid "Select what kind of support do you need"
msgstr "選擇您需要什麼樣的支撐"

#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:121
msgid "For support enforcers only"
msgstr "只適用於支撐材"

#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:155
#: src/slic3r/GUI/Tab.cpp:1534
msgid "Brim"
msgstr "帽邊"

#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:157
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr "啓用此功能時，將在每個模型第一層的周圍打印帽邊."

#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:165
msgid "Purging volumes"
msgstr "清除體積"

#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:278
msgid "Select what kind of pad do you need"
msgstr "選擇你需要什麼樣的墊片"

#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:281
msgid "Below object"
msgstr "下面的模型"

#: src/slic3r/GUI/FrequentlyChangedParameters.cpp:282
msgid "Around object"
msgstr "圍繞模型"

#: src/slic3r/GUI/GalleryDialog.cpp:73 src/slic3r/GUI/MainFrame.cpp:1690
msgid "Shape Gallery"
msgstr "形狀圖庫"

#: src/slic3r/GUI/GalleryDialog.cpp:80
msgid "Select shape from the gallery"
msgstr "從圖庫中選擇形狀"

#: src/slic3r/GUI/GalleryDialog.cpp:121 src/slic3r/GUI/Tab.cpp:4971
msgid "Add"
msgstr "添加"

#: src/slic3r/GUI/GalleryDialog.cpp:121
msgid "Add one or more custom shapes"
msgstr "添加一個或多個自定義形狀"

#: src/slic3r/GUI/GalleryDialog.cpp:122 src/slic3r/GUI/GalleryDialog.cpp:546
#: src/slic3r/GUI/GLCanvas3D.cpp:5316 src/slic3r/GUI/GUI_Factories.cpp:532
#: src/slic3r/GUI/Tab.cpp:4539
msgid "Delete"
msgstr "刪除"

#: src/slic3r/GUI/GalleryDialog.cpp:122
msgid "Delete one or more custom shape. You can't delete system shapes"
msgstr "刪除一個或多個自定義形狀。不過您不能刪除系統內建的形狀"

#: src/slic3r/GUI/GalleryDialog.cpp:154
msgid "Add to bed"
msgstr "添加到載台上"

#: src/slic3r/GUI/GalleryDialog.cpp:154
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2009
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2092
msgid "OK"
msgstr "確認"

#: src/slic3r/GUI/GalleryDialog.cpp:155
msgid "Add selected shape(s) to the bed"
msgstr "將選定的形狀添加到載台上"

#: src/slic3r/GUI/GalleryDialog.cpp:440
msgid "Choose one or more files (STL, OBJ):"
msgstr "選擇一個或多個檔案（STL、OBJ）："

#: src/slic3r/GUI/GalleryDialog.cpp:480
#, boost-format
msgid ""
"It looks like selected %1%-file has an error or is destructed.\n"
"We can't load this file"
msgstr ""
"所選 %1% 檔案似乎有錯誤或已損壞。\n"
"我們無法匯入此檔案"

#: src/slic3r/GUI/GalleryDialog.cpp:491
msgid "Choose one PNG file:"
msgstr "選擇一個 PNG 檔案："

#: src/slic3r/GUI/GalleryDialog.cpp:504
msgid "Replacing of the PNG"
msgstr "取代PNG"

#: src/slic3r/GUI/GalleryDialog.cpp:548
msgid "Change thumbnail"
msgstr "變更縮圖"

#: src/slic3r/GUI/GalleryDialog.cpp:591
#, boost-format
msgid "Loading of the \"%1%\""
msgstr "匯入\"%1%\""

#: src/slic3r/GUI/GCodeViewer.cpp:390
msgid "Retract"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:391
msgid "Unretract"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:392
msgid "Seam"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:393
msgid "Tool Change"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:394
msgid "Color Change"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:395
msgid "Pause Print"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:398 src/slic3r/GUI/GCodeViewer.cpp:3004
msgid "Wipe"
msgstr "擦拭"

#: src/slic3r/GUI/GCodeViewer.cpp:399
msgid "Extrude"
msgstr ""

#. TRN: Show/hide properties is a tooltip on a button which toggles an extra window in the G-code Viewer, showing properties of current G-code segment.
#: src/slic3r/GUI/GCodeViewer.cpp:461
msgid "Hide properties"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:461
msgid "Show properties"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:479 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:239
msgid "Type"
msgstr "類型"

#: src/slic3r/GUI/GCodeViewer.cpp:482 src/slic3r/GUI/GCodeViewer.cpp:2400
#: src/slic3r/GUI/GCodeViewer.cpp:2448 src/slic3r/GUI/GCodeViewer.cpp:2466
msgid "Feature type"
msgstr "特徵類型"

#: src/slic3r/GUI/GCodeViewer.cpp:510 src/slic3r/GUI/GUI_ObjectList.cpp:4110
msgid "Layer"
msgstr "層"

#: src/slic3r/GUI/GCodeViewer.cpp:525
msgid "Volumetric flow rate"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:535 src/slic3r/GUI/Tab.cpp:2241
msgid "Fan speed"
msgstr "風扇速速"

#: src/slic3r/GUI/GCodeViewer.cpp:545 src/slic3r/GUI/Tab.cpp:2208
msgid "Temperature"
msgstr "溫度"

#: src/slic3r/GUI/GCodeViewer.cpp:549 src/slic3r/GUI/GCodeViewer.cpp:2400
#: src/slic3r/GUI/GCodeViewer.cpp:2504 src/slic3r/GUI/RammingChart.cpp:94
msgid "Time"
msgstr "耗時"

#: src/slic3r/GUI/GCodeViewer.cpp:562
msgid "Actual speed profile"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:565
msgid "Hide table"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:565
msgid "Show table"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:631
msgid "Tool position"
msgstr "工具位置"

#: src/slic3r/GUI/GCodeViewer.cpp:975
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:181
#: src/slic3r/GUI/MainFrame.cpp:1460 src/slic3r/GUI/Plater.cpp:4660
#: src/slic3r/GUI/Plater.cpp:4698 src/slic3r/GUI/Plater.cpp:4738
#: src/slic3r/GUI/Plater.cpp:4776 src/slic3r/GUI/PrintHostDialogs.cpp:429
msgid "Error"
msgstr "錯誤"

#: src/slic3r/GUI/GCodeViewer.cpp:2131 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:259
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:568
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:588
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2374
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1237
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2011
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:351
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:605
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:606
msgid "in"
msgstr "在"

#: src/slic3r/GUI/GCodeViewer.cpp:2132
msgctxt "Metre"
msgid "m"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2143
msgid "Click to hide"
msgstr "點擊以隱藏"

#: src/slic3r/GUI/GCodeViewer.cpp:2143
msgid "Click to show"
msgstr "點擊以顯示"

#: src/slic3r/GUI/GCodeViewer.cpp:2310
msgid "up to"
msgstr "直到"

#: src/slic3r/GUI/GCodeViewer.cpp:2316
msgid "above"
msgstr "在"

#: src/slic3r/GUI/GCodeViewer.cpp:2324
msgid "from"
msgstr "從"

#: src/slic3r/GUI/GCodeViewer.cpp:2324
msgid "to"
msgstr "到"

#: src/slic3r/GUI/GCodeViewer.cpp:2389 src/slic3r/GUI/GCodeViewer.cpp:2390
#: src/slic3r/GUI/GCodeViewer.cpp:2504
msgid "Percentage"
msgstr "百分比"

#: src/slic3r/GUI/GCodeViewer.cpp:2448 src/slic3r/GUI/GCodeViewer.cpp:2466
msgid "Height (mm)"
msgstr "高度（mm）"

#: src/slic3r/GUI/GCodeViewer.cpp:2448 src/slic3r/GUI/GCodeViewer.cpp:2466
msgid "Width (mm)"
msgstr "寬度（mm）"

#: src/slic3r/GUI/GCodeViewer.cpp:2448 src/slic3r/GUI/GCodeViewer.cpp:2466
msgid "Speed (mm/s)"
msgstr "速度（mm/秒）"

#: src/slic3r/GUI/GCodeViewer.cpp:2448 src/slic3r/GUI/GCodeViewer.cpp:2466
msgid "Actual speed (mm/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2449 src/slic3r/GUI/GCodeViewer.cpp:2467
msgid "Fan speed (%)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2449 src/slic3r/GUI/GCodeViewer.cpp:2467
msgid "Temperature (°C)"
msgstr "溫度 (°C)"

#: src/slic3r/GUI/GCodeViewer.cpp:2449 src/slic3r/GUI/GCodeViewer.cpp:2467
msgid "Volumetric flow rate (mm³/s)"
msgstr "體積流量 (mm3/s)"

#: src/slic3r/GUI/GCodeViewer.cpp:2449 src/slic3r/GUI/GCodeViewer.cpp:2467
msgid "Actual volumetric flow rate (mm³/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2450
msgid "Layer time (linear)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2450
msgid "Layer time (logarithmic)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2450 src/slic3r/GUI/GCodeViewer.cpp:2468
msgid "Tool"
msgstr "工具"

#: src/slic3r/GUI/GCodeViewer.cpp:2450 src/slic3r/GUI/GCodeViewer.cpp:2468
msgid "Color Print"
msgstr "彩色打印"

#: src/slic3r/GUI/GCodeViewer.cpp:2574
msgid "Default color"
msgstr "預設顏色"

#: src/slic3r/GUI/GCodeViewer.cpp:2599
msgid "default color"
msgstr "預設顏色"

#: src/slic3r/GUI/GCodeViewer.cpp:2700 src/slic3r/GUI/GCodeViewer.cpp:2756
msgid "Color change"
msgstr "顏色變更"

#: src/slic3r/GUI/GCodeViewer.cpp:2719 src/slic3r/GUI/GCodeViewer.cpp:2754
msgid "Print"
msgstr "打印"

#: src/slic3r/GUI/GCodeViewer.cpp:2755 src/slic3r/GUI/GCodeViewer.cpp:2789
msgid "Pause"
msgstr "暂停"

#: src/slic3r/GUI/GCodeViewer.cpp:2772 src/slic3r/GUI/GCodeViewer.cpp:2775
msgid "Event"
msgstr "事件"

#: src/slic3r/GUI/GCodeViewer.cpp:2772 src/slic3r/GUI/GCodeViewer.cpp:2775
msgid "Remaining time"
msgstr "剩餘時間"

#: src/slic3r/GUI/GCodeViewer.cpp:2772 src/slic3r/GUI/GCodeViewer.cpp:2775
msgid "Duration"
msgstr "持續時間"

#: src/slic3r/GUI/GCodeViewer.cpp:2852 src/slic3r/GUI/GUI.cpp:216
#: src/slic3r/GUI/Sidebar.cpp:404 src/slic3r/GUI/Tab.cpp:2187
#: src/slic3r/GUI/Tab.cpp:2188
msgid "Filament"
msgstr "線材"

#: src/slic3r/GUI/GCodeViewer.cpp:2869
msgid "Hide Custom G-code"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2869
msgid "Show Custom G-code"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2879
msgid "Estimated printing times"
msgstr "預計打印時間"

#: src/slic3r/GUI/GCodeViewer.cpp:2897 src/slic3r/GUI/GLCanvas3D.cpp:1859
#: src/slic3r/GUI/TopBarMenus.cpp:34
msgid "Normal mode"
msgstr "正常模式"

#: src/slic3r/GUI/GCodeViewer.cpp:2898 src/slic3r/GUI/GLCanvas3D.cpp:1850
msgid "Stealth mode"
msgstr "靜音模式"

#: src/slic3r/GUI/GCodeViewer.cpp:2911 src/slic3r/GUI/GLCanvas3D.cpp:1818
#: src/slic3r/GUI/GLCanvas3D.cpp:1908 src/slic3r/GUI/GLCanvas3D.cpp:1980
#: src/slic3r/GUI/GLCanvas3D.cpp:2015
msgid "Total"
msgstr "總計"

#: src/slic3r/GUI/GCodeViewer.cpp:2928
msgid "Show stealth mode"
msgstr "顯示靜音模式"

#: src/slic3r/GUI/GCodeViewer.cpp:2932
msgid "Show normal mode"
msgstr "顯示正常模式"

#: src/slic3r/GUI/GCodeViewer.cpp:3008
msgid "Retractions"
msgstr "回抽"

#: src/slic3r/GUI/GCodeViewer.cpp:3012
msgid "Deretractions"
msgstr "退縮"

#: src/slic3r/GUI/GCodeViewer.cpp:3016
msgid "Seams"
msgstr "接縫"

#: src/slic3r/GUI/GCodeViewer.cpp:3020
msgid "Tool changes"
msgstr "取代工具"

#: src/slic3r/GUI/GCodeViewer.cpp:3024
msgid "Color changes"
msgstr "變更顏色"

#: src/slic3r/GUI/GCodeViewer.cpp:3028
msgid "Print pauses"
msgstr "暫停打印"

#: src/slic3r/GUI/GCodeViewer.cpp:3032
msgid "Custom G-codes"
msgstr "自定義 G-codes"

#: src/slic3r/GUI/GCodeViewer.cpp:3036
msgid "Center of gravity"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3041
msgid "Shells"
msgstr "外殼"

#: src/slic3r/GUI/GCodeViewer.cpp:3046
msgid "Tool marker"
msgstr "工具標記"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:203
msgid "Planar"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:203
msgid "Dovetail"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:207
msgid "Auto"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:207
msgid "Manual"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:210
msgid "Plug"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:211
msgid "Dowel"
msgstr ""

#. TRN Connectors type next to "Plug" and "Dowel"
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:213
msgid "Snap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:221
msgid "Prism"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:221
msgid "Frustum"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:225
msgid "Triangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:225
msgid "Square"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:225
msgid "Hexagon"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:225
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:76
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:120
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46
msgid "Circle"
msgstr "圓型"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:232
msgid "Keep orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:233
msgid "Place on cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:234
msgid "Flip upside down"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:238
#: src/slic3r/GUI/ObjectDataViewModel.cpp:73
msgid "Connectors"
msgstr ""

#. TRN - Input label. Be short as possible
#. Size in emboss direction
#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:242
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3912
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2126
msgid "Depth"
msgstr ""

#. TRN - Input label. Be short as possible
#. Angle between Y axis and text line direction.
#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:244
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3950
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2134
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:242
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:658
#: src/slic3r/GUI/Mouse3DController.cpp:483
#: src/slic3r/GUI/Mouse3DController.cpp:504
msgid "Rotation"
msgstr "旋轉"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:245
msgid "Groove"
msgstr "溝槽"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:247
msgid "Flap Angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:248
msgid "Groove Angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:262
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2739
#: src/slic3r/GUI/GUI_ObjectList.cpp:4110
#: src/slic3r/GUI/GUI_ObjectList.cpp:4302
msgid "Part"
msgstr "零件"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:262
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2739
msgid "Object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:278
msgid ""
"Click to flip the cut plane\n"
"Drag to move the cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:280
msgid ""
"Click to flip the cut plane\n"
"Drag to move the cut plane\n"
"Right-click a part to assign it to the other side"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:427
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:637
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1673
msgid "Move cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:532
msgid "Mode"
msgstr "模式"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:535
msgid "Change cut mode"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:608
msgid "Value"
msgstr "值"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:615
msgid "Tolerance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1190
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1193
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1194
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1502
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1505
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1506
msgid "Left click"
msgstr "滑鼠左鍵"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1190
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3654
msgid "Add connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1191
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1503
msgid "Right click"
msgstr "滑鼠右鍵"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1191
msgid "Remove connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1192
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1504
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1507
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1508
msgid "Drag"
msgstr "拖動"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1192
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1657
msgid "Move connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1193
msgid "Add connector to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1194
msgid "Remove connector from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1195
msgid "Select all connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1668
msgid "Rotate cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2295
msgid "Remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2352
msgid "Bulge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2352
msgid "Bulge proportion related to radius"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2353
msgid "Space"
msgstr "空格"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2353
msgid "Space proportion related to radius"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2358
msgid "Confirm connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2427
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2486
msgid "Flip cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2528
msgid "Groove change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2540
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2591
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2634 src/slic3r/GUI/GLCanvas3D.cpp:384
msgid "Reset"
msgstr "重置"

#. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'.
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2579
msgid "Edited"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2663
msgid "Hold SHIFT key to draw a cut line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2676
msgid "Cut position"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2683
msgid "Reset cutting plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2696
msgid "Edit connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2696
msgid "Add connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2703
msgid "Reset cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2704
msgid "Reset cutting plane and remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2769
msgid "Cut result"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2789
msgid "Cut into"
msgstr ""

#. TRN CutGizmo: RadioButton Cut into ...
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2796
msgid "Objects"
msgstr ""

#. TRN CutGizmo: RadioButton Cut into ...
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2800
msgid "Parts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2814
msgid "Perform cut"
msgstr "進行切割"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2919
msgid "Invalid connectors detected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2921
#, c-format, boost-format
msgid "%1$d connector is out of cut contour"
msgid_plural "%1$d connectors are out of cut contour"
msgstr[0] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2924
#, c-format, boost-format
msgid "%1$d connector is out of object"
msgid_plural "%1$d connectors are out of object"
msgstr[0] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2927
msgid "Some connectors are overlapped"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2931
msgid "Select at least one object to keep after cutting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2933
msgid "Cut plane is placed out of object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2935
msgid "Cut plane with groove is invalid"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3238
msgid "Connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3317
msgid ""
"Open edges or errors were detected after the cut.\n"
"Do you want to fix them by Windows repair algorithm?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3319
msgid "Errors detected after cut operation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3339
#, boost-format
msgid "Repairing object %1%"
msgstr ""

#. TRN: This is followed by a list of object which are to be repaired.
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3342
msgid "Repairing objects:"
msgstr ""

#. TRN: This shows in a progress dialog while the operation is in progress.
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3361
#: src/slic3r/GUI/GUI_ObjectList.cpp:4687
msgid "Fixing by Windows repair algorithm"
msgstr ""

#. TRN: Title of a dialog informing the user about the result of the model repair operation.
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3376
msgid "Repair operation finished"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3407
msgid "Cut by Plane"
msgstr "用平面分割"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3624
msgid "Cut by line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3681
msgid "Delete connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:332
msgid "Entering Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:333
msgid "Leaving Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:334
msgid "Cut gizmo editing"
msgstr ""

#. TRN - Title in Undo/Redo stack after rotate with text around emboss axe
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:81
msgid "Text rotate"
msgstr ""

#. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:85
msgid "Text move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:461
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1982
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:314
msgid "Set Mirror"
msgstr "設定鏡像"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:527
msgid "Embossed text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:742
msgid "Enter emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:743
msgid "Leave emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:744
msgid "Embossing actions"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:763
msgid "Emboss"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1042
msgid "NORMAL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1043
msgid "SMALL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1044
msgid "ITALIC"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1045
msgid "SWISS"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1046
msgid "MODERN"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1082
msgid "First font"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1087
msgid "Default font"
msgstr "預設字型"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1375
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"embossed text changed."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1562
msgid ""
"The text cannot be written using the selected font. Please try choosing a "
"different font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1570
msgid "Embossed text cannot contain only white spaces."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1572
msgid "Text contains character glyph (represented by '?') unknown by font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1575
msgid "Text input doesn't show font skew."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1576
msgid "Text input doesn't show font boldness."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1577
msgid "Text input doesn't show gap between lines."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1581
msgid "Too tall, diminished font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1583
msgid "Too small, enlarged font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1586
msgid "Text doesn't show current horizontal alignment."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1716
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:684
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:355
msgid "Apply"
msgstr "套用"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1734
msgid "Revert font changes."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1840
#, boost-format
msgid "Font \"%1%\" can't be selected."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1914
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1999
msgid "Operation"
msgstr ""

#. TRN EmbossOperation
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1929
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2014
msgid "Join"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1932
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2017
msgid "Click to change text into object part."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1935
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2020
#: src/slic3r/GUI/GUI_ObjectList.cpp:4292
msgid "You can't change a type of the last solid part of the object."
msgstr "您無法變更模型最後一個實體部分的類型。"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1936
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2021
msgctxt "EmbossOperation"
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1942
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2027
msgid "Click to change part type into negative volume."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1948
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2033
#: src/slic3r/GUI/GUI_ObjectList.cpp:4309
msgid "Modifier"
msgstr "修改器"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1954
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2039
msgid "Click to change part type into modifier."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1961
msgid "Change Text Type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1990
#, boost-format
msgid "Rename style(%1%) for embossing text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1998
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2079
msgid "Name can't be empty."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2000
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2081
msgid "Name has to be unique."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2036
msgid "Rename style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2043
msgid "Rename current style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2044
msgid "Can't rename temporary style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2061
msgid "First Add style to list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2063
#, boost-format
msgid "Save %1% style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2065
msgid "No changes to save."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2072
msgid "New name of style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2117
msgid "Save as new style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2129
msgid "Only valid font can be added to style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2131
msgid "Add style to my list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2133
msgid "Save as new style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2151
msgid "Remove style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2162
msgid "Can't remove the last existing style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2175
#, boost-format
msgid "Are you sure you want to permanently remove the \"%1%\" style?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2195
#, boost-format
msgid "Delete \"%1%\" style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2196
#, boost-format
msgid "Can't delete \"%1%\". It is last style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2197
#, boost-format
msgid "Can't delete temporary style \"%1%\"."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2338
#, boost-format
msgid "Modified style \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2339
#, boost-format
msgid "Current style is \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2347
#, boost-format
msgid ""
"Changing style to \"%1%\" will discard current style modification.\n"
"\n"
"Would you like to continue anyway?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2348
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:525
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:533
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:553 src/slic3r/GUI/GUI.cpp:144
#: src/slic3r/GUI/GUI_Preview.cpp:514
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:906
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:925
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:955 src/slic3r/GUI/Plater.cpp:4674
#: src/slic3r/GUI/Plater.cpp:4682 src/slic3r/GUI/Plater.cpp:4752
#: src/slic3r/GUI/Plater.cpp:4760 src/slic3r/GUI/WifiConfigDialog.cpp:256
#: src/slic3r/GUI/WipeTowerDialog.cpp:70
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:59
msgid "Warning"
msgstr "警告"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2362
msgid "Not valid style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2363
#, boost-format
msgid "Style \"%1%\" can't be used and will be removed from a list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2409
msgid "Unset italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2426
msgid "Set italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2455
msgid "Unset bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2473
msgid "Set bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2637
msgid "Revert text size."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2649
msgid "Revert embossed depth."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2708
msgid ""
"Advanced options cannot be changed for the selected font.\n"
"Select another font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2765
msgid "Select from True Type Collection."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2769
msgid "Set text to face camera"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2776
msgid "Orient the text towards the camera."
msgstr ""

#. TRN - Tooltip after mouse hover above reverting button (undo icon)
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2811
msgid "Revert using of model surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2818
msgid ""
"If checked,\n"
"model surface under the text's shape is shift in the embossing direction,\n"
"otherwise text is flat and you have to deal with distance from surface."
msgstr ""

#. TRN - Tooltip after mouse hover above reverting button (undo icon)
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2836
msgid "Revert Transformation per glyph."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2842
msgid ""
"If checked,\n"
"each letter(glyph) has an independent orthogonal projection,\n"
"otherwise, the whole text has the same orthogonal projection."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2858
msgctxt "Alignment"
msgid "Left"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2859
msgctxt "Alignment"
msgid "Center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2860
msgctxt "Alignment"
msgid "Right"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2864
msgctxt "Alignment"
msgid "Top"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2865
msgctxt "Alignment"
msgid "Middle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2866
msgctxt "Alignment"
msgid "Bottom"
msgstr ""

#. TRN - Tooltip after mouse hover above reverting button (undo icon)
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2891
msgid "Revert alignment."
msgstr ""

#. TRN - Tooltip after mouse hover above reverting button (undo icon)
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2932
msgid "Revert gap between characters"
msgstr ""

#. TRN - Tooltip above char gap slider
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2936
msgid "Additional distance between characters"
msgstr ""

#. TRN - Tooltip after mouse hover above reverting button (undo icon)
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3000
msgid "Revert gap between lines"
msgstr ""

#. TRN - Tooltip above line gap slider
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3002
msgid "Additional distance between lines"
msgstr ""

#. TRN - Tooltip after mouse hover above reverting button (undo icon)
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3069
msgid "Undo boldness"
msgstr ""

#. TRN - Tooltip above line gap slider
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3071
msgid "Tiny / Wide glyphs"
msgstr ""

#. TRN - Tooltip after mouse hover above reverting button (undo icon)
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3109
msgid "Undo letter's skew"
msgstr ""

#. TRN - Tooltip above skew ration slider
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3111
msgid "Italic strength ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3148
msgid "Undo translation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3149
msgid "Distance of the center of the text to the model surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3207
msgid "Undo rotation"
msgstr ""

#. TRN - Tooltip above rotation slider
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3209
msgid "Rotate text Clock-wise."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3259
msgid "Unlock the text's rotation when moving text along the object's surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3260
msgid "Lock the text's rotation when moving text along the object's surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3407
#, boost-format
msgid ""
"Can't load exactly same font(\"%1%\"). Aplication selected a similar "
"one(\"%2%\"). You have to specify font for enable edit text."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3817
msgid "No symbol"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3818
#: src/slic3r/GUI/GUI_ObjectList.cpp:1576 src/slic3r/GUI/Plater.cpp:1271
msgid "Loading"
msgstr "匯入中"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3868
msgid "In queue"
msgstr ""

#. TRN - Input label. Be short as possible
#. Select look of letter shape
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3906
msgid "Font"
msgstr "字型"

#. TRN - Input label. Be short as possible
#. Copy surface of model on surface of the embossed text
#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3923
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2130
msgid "Use surface"
msgstr ""

#. TRN - Input label. Be short as possible
#. Option to change projection on curved surface
#. for each character(glyph) in text separately
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3927
msgid "Per glyph"
msgstr ""

#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3932
msgid "Char gap"
msgstr ""

#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3934
msgid "Line gap"
msgstr ""

#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3936
msgid "Boldness"
msgstr ""

#. TRN - Input label. Be short as possible
#. Like Font italic
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3940
msgid "Skew ratio"
msgstr ""

#. TRN - Input label. Be short as possible
#. Distance from model surface to be able
#. move text as part fully into not flat surface
#. move text as modifier fully out of not flat surface
#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3946
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2132
msgid "From surface"
msgstr ""

#. TRN - Input label. Be short as possible
#. Keep vector from bottom to top of text aligned with printer Y axis
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3954
msgid "Keep up"
msgstr ""

#. TRN - Input label. Be short as possible.
#. Some Font file contain multiple fonts inside and
#. this is numerical selector of font inside font collections
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3959
msgid "Collection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43
#: src/slic3r/GUI/ObjectDataViewModel.cpp:71
msgid "Paint-on supports"
msgstr "繪製支撐"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
msgid "Automatic painting"
msgstr ""

#. TRN GizmoFdmSupports : message line during the waiting for autogenerated supports
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
msgid "painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:104
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:126
msgid "Clipping of view"
msgstr "視圖剪輯"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:103
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:127
msgid "Reset direction"
msgstr "重置方向"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:105
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
msgid "Brush size"
msgstr "筆刷大小"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:106
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
msgid "Brush shape"
msgstr "筆刷形狀"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:59
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1850
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:107
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
msgid "Left mouse button"
msgstr "滑鼠左鍵"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
msgid "Enforce supports"
msgstr "強制支撐"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:109
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
msgid "Right mouse button"
msgstr "滑鼠右鍵"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:589
msgid "Block supports"
msgstr "阻斷支撐"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:63
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
msgid "Shift + Left mouse button"
msgstr "Shift + 滑鼠左鍵"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:584
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:251
msgid "Remove selection"
msgstr "移除選擇"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:65
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:45
msgid "Remove all selection"
msgstr "移除全部選擇"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:47
#: src/slic3r/GUI/GUI_Factories.cpp:553
msgid "Sphere"
msgstr "球型"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:69
msgid "Highlight overhang by angle"
msgstr "依照角度強調顯示懸空的部分"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70
msgid "Enforce"
msgstr "強制"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:73
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
msgid "Tool type"
msgstr "工具類型"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:74
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:125
msgid "Brush"
msgstr "筆刷"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:75
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
msgid "Smart fill"
msgstr "智慧型填充"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:77
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:130
msgid "Smart fill angle"
msgstr "智慧型填充角度"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:79
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:133
msgid "Split triangles"
msgstr "拆開三角形"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:80
msgid "On overhangs only"
msgstr "僅在懸空部分"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:194
#, boost-format
msgid ""
"Preselects faces by overhang angle. It is possible to restrict paintable "
"facets to only preselected faces when the option \"%1%\" is enabled."
msgstr ""
"依照懸空角度預先選取面。啟用選項“%1%”後，能將可繪製之範圍限制在預先選取的面。"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:237
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:403
msgid "Paints facets according to the chosen painting brush."
msgstr "根據選取的筆刷繪製面。"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:416
msgid ""
"Paints neighboring facets whose relative angle is less or equal to set angle."
msgstr "繪製相對角度小於或等於設定角度的相鄰面。"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:249
#, boost-format
msgid "Allows painting only on facets selected by: \"%1%\""
msgstr "僅允許在由以下條件選取的面上進行繪製：“%1%”"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:264
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:460
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:145
msgid "Paints all facets inside, regardless of their orientation."
msgstr "繪製內部的所有小平面，無論它們的方向如何。"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:273
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:469
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:153
msgid "Ignores facets facing away from the camera."
msgstr "忽略背對相機的面。"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:282
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:478
msgid "Paints only one facet."
msgstr "僅繪製一個面。"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:290
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:305
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:486
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:504
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:519
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:133
msgid "Alt + Mouse wheel"
msgstr "Alt + 滑鼠輪"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:295
msgid "Splits bigger facets into smaller ones while the object is painted."
msgstr "在繪製模型時將較大的面拆開為較小的面。"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:329
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:541
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:171
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1511
msgid "Mouse wheel"
msgstr "滑鼠滾輪"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:334
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:546
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:176
msgid "Reset selection"
msgstr "重置選取"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:386
msgid "Block supports by angle"
msgstr "按角度製作阻斷支撐"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:387
msgid "Add supports by angle"
msgstr "按角度添加支撐"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:525
msgid "Automatic painting requires valid print setup."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:533
msgid "Automatic painting requires printable object."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:551
msgid "Automatic painting will erase all currently painted areas."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:552
msgid "Are you sure you want to do it?"
msgstr "你確定要這樣做嗎？"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:556
msgid "Automatic painting support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:587
msgid "Add supports"
msgstr "添加支撐"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:28
msgid "Entering Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:29
msgid "Leaving Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:30
msgid "Paint-on supports editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:37
#: src/slic3r/GUI/GLCanvas3D.cpp:4401
msgid "Gizmo-Place on Face"
msgstr "Gizmo-放置在臉上"

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:79
msgid "Place on face"
msgstr "平貼在載台"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
msgid "Hollow this object"
msgstr "鏤空這個模型"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
msgid "Preview hollowed and drilled model"
msgstr "預覽鏤空和鑽孔的模型"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
msgid "Offset"
msgstr "偏移量"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:118
msgid "Quality"
msgstr "品質"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
msgid "Hole diameter"
msgstr "孔徑"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
msgid "Hole depth"
msgstr "孔深"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Remove selected holes"
msgstr "移除選取的孔"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
msgid "Remove all holes"
msgstr "移除全部的孔"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
msgid "Show supports"
msgstr "顯示支撐"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:251
msgid "Add drainage hole"
msgstr "添加排水孔"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:370
msgid "Delete drainage hole"
msgstr "移除排水孔"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:664
msgid "Hollowing parameter change"
msgstr "鏤空參數變更"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:748
msgid "Change drainage hole diameter"
msgstr "改變排水孔直徑"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:850
msgid "Hollow and drill"
msgstr "鏤空和鑽孔"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:860
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1079
msgid "Selected object has to be on the active bed."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:900
msgid "Move drainage hole"
msgstr "移動排水孔"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:74
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:85
msgid "Vertex"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:75
msgid "Edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:77
msgid "Plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:86
msgid "Point on edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:87
msgid "Point on circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:88
msgid "Point on plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:98
msgid "Center of edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:99
msgid "Center of circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:565
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2070
msgid "Measure"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1262
msgid "Edit to scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1388
msgctxt "Verb"
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1858
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1885
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1891
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1920
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1927
msgid "Unselect feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1864
msgid "Unselect center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1869
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1896
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1932
msgid "Select center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1874
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1901
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1937
msgid "Unselect point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1880
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1907
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1912
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1944
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1949
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1957
msgid "Select feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1912
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1949
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1957
msgid "Select point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1974
msgid "Enable point selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1979
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2048
msgid "Restart selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1989
msgid "Unselect"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2040
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2042
msgid "Selection"
msgstr "所選項目"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2062
#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "Copy to clipboard"
msgstr "複製到剪貼簿"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2079
msgid "Angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2093
msgid "Perpendicular distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2093
msgid "Distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2103
msgid "Direct distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2113
msgid "Distance XYZ"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:168
msgid "Entering Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:169
msgid "Leaving Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:170
msgid "Measure gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:33
#, boost-format
msgid ""
"Your printer has more extruders than the multi-material painting gizmo "
"supports. For this reason, only the first %1% extruders will be able to be "
"used for painting."
msgstr ""
"您的打印機具有更多的擠出機，但因為不是多噴繪工具能支援的程度。因此只有前 %1% "
"個擠出機目標能被用於繪製。"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:51
#: src/slic3r/GUI/ObjectDataViewModel.cpp:74
msgid "Multimaterial painting"
msgstr "多種材料的繪製"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:108
msgid "First color"
msgstr "第一種顏色"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:110
msgid "Second color"
msgstr "第二種顏色"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:703
msgid "Remove painted color"
msgstr "移除繪製的顏色"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
msgid "Change brush size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
msgid "Change angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
msgid "Change height range"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
msgid "Clear all"
msgstr "全部清除"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
msgid "Bucket fill"
msgstr "油漆桶填充"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:128
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:135
msgid "Height range"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:131
msgid "Bucket fill angle"
msgstr ""

#. TRN Means "current color"
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:365
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:381
msgid "Current"
msgstr ""

#. TRN Means "original color"
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:367
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:381
msgid "Original"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:429
msgid "Paints neighboring facets that have the same color."
msgstr "繪製具有相同顏色的相鄰面。"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:445
msgid "Paints facets within the chosen height range."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:491
msgid "Split bigger facets into smaller ones while the object is painted."
msgstr "在繪製模型時將較大的面拆開成較小的面。"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:706
#, boost-format
msgid "Painted using: Extruder %1%"
msgstr "繪製使用：擠出機%1%"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:124
msgid "Entering Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:125
msgid "Leaving Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:126
msgid "Multimaterial painting editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:62
msgid "Move"
msgstr "移動"

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:82 src/slic3r/GUI/GLCanvas3D.cpp:3356
msgid "Gizmo-Move"
msgstr "Gizmo-移動"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:592
#: src/slic3r/GUI/GLCanvas3D.cpp:3450
msgid "Gizmo-Rotate"
msgstr "Gizmo-旋轉"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:637
msgid "Optimize orientation"
msgstr "最佳化方向"

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:144
msgid "Gizmo-Scale"
msgstr "Gizmo 比例"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:254
msgid "Enforce seam"
msgstr "強制接縫"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:256
msgid "Block seam"
msgstr "阻斷接縫"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:56
msgid "Seam painting"
msgstr "接縫繪製"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:29
msgid "Entering Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:30
msgid "Leaving Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:31
msgid "Paint-on seam editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:95
msgid "Mesh name"
msgstr "網格名稱"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:97
msgid "Level of detail"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:98
msgid "Decimate ratio"
msgstr "抽取比率"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:137
#, boost-format
msgid ""
"Processing model \"%1%\" with more than 1M triangles could be slow. It is "
"highly recommended to reduce amount of triangles."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:140
#: src/slic3r/GUI/GUI_Factories.cpp:885
msgid "Simplify model"
msgstr "簡化模型"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:167
msgid "Simplify"
msgstr "簡化"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:180
msgid "Simplification is currently only allowed when a single part is selected"
msgstr "目前只允許在選擇單個零件時進行簡化"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:284
msgid "Extra high"
msgstr "極高"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:285
#: src/slic3r/GUI/LoadStepDialog.cpp:40
msgid "High"
msgstr "高"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:286
#: src/slic3r/GUI/LoadStepDialog.cpp:39
msgid "Medium"
msgstr "中等"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:287
#: src/slic3r/GUI/LoadStepDialog.cpp:38
msgid "Low"
msgstr "低"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:288
msgid "Extra low"
msgstr "極低"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:311
msgid ""
"A multipart object can be simplified using only a Level of detail. If you "
"want to enter a Decimate ratio, do the simplification separately."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:340
#, c-format, boost-format
msgid "%d triangles"
msgstr "%d 個三角形"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:343
msgid "Show wireframe"
msgstr "顯示線框"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:349
msgid "Operation already cancelling. Please wait few seconds."
msgstr "已經取消了操作。請稍等一下。"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:358
msgid "Can't apply when proccess preview."
msgstr "在預覽處理中無法套用。"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:365
#, boost-format
msgid "Process %1% / 100"
msgstr "目前處理到 %1% / 100"

#. TRN %1% = volumes name
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:531
#, boost-format
msgid "Simplify %1%"
msgstr "簡化%1%"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:532
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"simplifying the mesh."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.hpp:155
msgid "Model simplification has been canceled"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:73
msgid "Entering SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:74
msgid "Leaving SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:83
msgid "Visible support structure"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:90
msgid "Click to show support points without support structure"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:97
msgid "Click to show support structure with pad"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:101
msgid "Visible support points without support structure"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:117
msgid "Head diameter"
msgstr "頭直徑"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:118
msgid "Lock supports under new islands"
msgstr "在新島塊下方鎖定支撐"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:119
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1510
msgid "Remove selected points"
msgstr "移除選定的點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:120
msgid "Remove all points"
msgstr "移除全部點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:121
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1513
msgid "Apply changes"
msgstr "套用變更"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:122
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1514
msgid "Discard changes"
msgstr "放棄變更"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:124
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1516
msgid "Auto-generate points"
msgstr "自動產生點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:125
msgid "Manual editing"
msgstr "手動編輯"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:398
msgid "Add support point"
msgstr "添加支撑點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:551
msgid "Delete support point"
msgstr "刪除支撐點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:687
msgid "Change point head diameter"
msgstr "改變點頭直徑"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:740
msgid "Change amount of generated support points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:756
msgid "Support parameter change"
msgstr "支撐參數變更"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1055
msgid "SLA Support Points"
msgstr "SLA 支撐點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1060
msgid "Do you want to save your manually edited support points?"
msgstr "是否要儲存手動編輯的支撐點？"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1061
msgid "Save support points?"
msgstr "儲存支撐點？"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1130
msgid "Move support point"
msgstr "移動支撐點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
msgid "Support points edit"
msgstr "支撐點編輯"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1365
msgid "Autogenerate support points"
msgstr "自動產生支撐點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1473
msgid "SLA gizmo keyboard shortcuts"
msgstr "SLA Gizmo 鍵盤快捷鍵"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1484
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr "注意：某些快捷方式僅在非編輯模式下有效。"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1502
msgid "Add point"
msgstr "添加點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1503
msgid "Remove point"
msgstr "移除點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1504
msgid "Move point"
msgstr "移動點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1505
msgid "Add point to selection"
msgstr "將點添加到選取"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1506
msgid "Remove point from selection"
msgstr "從選擇中移除點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1507
msgid "Select by rectangle"
msgstr "按矩形選擇"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1508
msgid "Deselect by rectangle"
msgstr "按矩形取消選擇"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1509
msgid "Select all points"
msgstr "選擇所有點"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1511
msgid "Move clipping plane"
msgstr "移動剪裁平面"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1512
msgid "Reset clipping plane"
msgstr "重置裁剪平面"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1515
msgid "Switch to editing mode"
msgstr "切換到編輯模式"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1528
msgid "Generated support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1529
msgid "Selected support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1530
msgid "Edited support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1531
msgid "Island support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1532
msgid "Hovered support point"
msgstr ""

#. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:55
msgid "SVG rotate"
msgstr ""

#. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:59
msgid "SVG move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:377
msgid "Enter SVG gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:378
msgid "Leave SVG gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:379
msgid "SVG actions"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:391
#: src/slic3r/GUI/GUI_Factories.cpp:621
msgid "SVG"
msgstr "SVG"

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1057
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1094
#, boost-format
msgid "Opacity (%1%)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1062
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1098
#, boost-format
msgid "Color gradient (%1%)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1065
msgid "Undefined fill type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1068
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1104
msgid "Linear gradient"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1072
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1108
msgid "Radial gradient"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1081
msgid "Open filled path"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1101
msgid "Undefined stroke type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1145
msgid "Path can't be healed from selfintersection and multiple points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1149
msgid ""
"Final shape constains selfintersection or multiple points with same "
"coordinate."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1155
#, boost-format
msgid "Shape is marked as invisible (%1%)."
msgstr ""

#. TRN: The first placeholder is shape identifier, the second one is text describing the problem.
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1162
#, boost-format
msgid "Fill of shape (%1%) contains unsupported: %2%."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1167
#, boost-format
msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1172
#, boost-format
msgid "Stroke of shape (%1%) contains unsupported: %2%."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1395 src/slic3r/GUI/SurfaceDrag.cpp:388
msgid "Face the camera"
msgstr ""

#. TRN - Preview of filename after clear local filepath.
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1467
msgid "Unknown filename"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1498
#, boost-format
msgid "SVG file path is \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1515
msgid "Reload SVG file from disk."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1525
msgid "Change file"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1534
msgid "Change to another .svg file"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1537
msgid "Forget the file path"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1551
msgid ""
"Do NOT save local path to 3MF file.\n"
"Also disables 'reload from disk' option."
msgstr ""

#. TRN: An menu option to convert the SVG into an unmodifiable model part.
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1577
msgid "Bake"
msgstr ""

#. TRN: Tooltip for the menu item.
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1582
msgid "Bake into model as uneditable part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1591
msgid "Save SVG file"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1613
msgid "Save as '.svg' file"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1682
msgid "Size in emboss direction."
msgstr ""

#. TRN: The placeholder contains a number.
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1693
#, boost-format
msgid "Scale also changes amount of curve samples (%1%)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1763
msgid "Width of SVG."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1777
msgid "Height of SVG."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1787
msgid "Lock/unlock the aspect ratio of the SVG."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1797
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:446
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:471
msgid "Reset scale"
msgstr "重置比例"

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1862
msgid "Distance of the center of the SVG to the model surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1888
msgid "Reset distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1909
msgid "Rotate Clock-wise."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1932
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:406
msgid "Reset rotation"
msgstr "重置旋轉"

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:1952
msgid "Lock/unlock rotation angle when dragging above the surface."
msgstr ""

#. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else).
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2047
msgid "Change SVG Type"
msgstr ""

#. TRN - Input label. Be short as possible
#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2136
#: src/slic3r/GUI/GUI_Factories.cpp:1067
msgid "Mirror"
msgstr "鏡像"

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2178
msgid "Choose SVG file for emboss:"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2232
#, boost-format
msgid "File does NOT exist (%1%)."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2237
#, boost-format
msgid "Filename has to end with \".svg\" but you selected %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2242
#, boost-format
msgid "Nano SVG parser can't load from file (%1%)."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp:2252
#, boost-format
msgid "SVG file does NOT contain a single path to be embossed (%1%)."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:214
msgid ""
"ERROR: Please close all manipulators available from the left toolbar first"
msgstr "錯誤：請先關閉左側工具欄中所有可用的操作器"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1030
msgid ""
"You are currently editing SLA support points. Please, apply or discard your "
"changes first."
msgstr "您當前正在編輯 SLA 支持點。請先套用或放棄您的變更。"

#: src/slic3r/GUI/GLCanvas3D.cpp:313 src/slic3r/GUI/GLCanvas3D.cpp:5453
#: src/slic3r/GUI/ObjectDataViewModel.cpp:76
msgid "Variable layer height"
msgstr "可變層高"

#: src/slic3r/GUI/GLCanvas3D.cpp:315
msgid "Left mouse button:"
msgstr "滑鼠左鍵："

#: src/slic3r/GUI/GLCanvas3D.cpp:317
msgid "Add detail"
msgstr "添加細節"

#: src/slic3r/GUI/GLCanvas3D.cpp:319
msgid "Right mouse button:"
msgstr "滑鼠右鍵："

#: src/slic3r/GUI/GLCanvas3D.cpp:321
msgid "Remove detail"
msgstr "刪除細節"

#: src/slic3r/GUI/GLCanvas3D.cpp:323
msgid "Shift + Left mouse button:"
msgstr "Shift + 滑鼠左鍵："

#: src/slic3r/GUI/GLCanvas3D.cpp:325
msgid "Reset to base"
msgstr "重置到載台"

#: src/slic3r/GUI/GLCanvas3D.cpp:327
msgid "Shift + Right mouse button:"
msgstr "Shift + 滑鼠右鍵："

#: src/slic3r/GUI/GLCanvas3D.cpp:329
msgid "Smoothing"
msgstr "平滑化"

#: src/slic3r/GUI/GLCanvas3D.cpp:331
msgid "Mouse wheel:"
msgstr "滑鼠滾輪："

#: src/slic3r/GUI/GLCanvas3D.cpp:333
msgid "Increase/decrease edit area"
msgstr "增加/減少編輯區域"

#: src/slic3r/GUI/GLCanvas3D.cpp:336
msgid "Adaptive"
msgstr "自動調整"

#: src/slic3r/GUI/GLCanvas3D.cpp:342
msgid "Quality / Speed"
msgstr "品質/速度"

#: src/slic3r/GUI/GLCanvas3D.cpp:345
msgid "Higher print quality versus higher print speed."
msgstr "更高的打印件質與更高的打印速度。"

#: src/slic3r/GUI/GLCanvas3D.cpp:357
msgid "Smooth"
msgstr "光滑"

#: src/slic3r/GUI/GLCanvas3D.cpp:375
msgid "Keep min"
msgstr "保持最小"

#: src/slic3r/GUI/GLCanvas3D.cpp:750
msgid "Variable layer height - Manual edit"
msgstr "可變層高 - 手動編輯"

#: src/slic3r/GUI/GLCanvas3D.cpp:847
msgid "Seq."
msgstr "順序。"

#: src/slic3r/GUI/GLCanvas3D.cpp:1207
msgid "SLA view"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1226
msgid "Show as processed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1227
msgid "Show as original"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1699
msgid "Variable layer height - Reset"
msgstr "可變層高 - 重置"

#: src/slic3r/GUI/GLCanvas3D.cpp:1707
msgid "Variable layer height - Adaptive"
msgstr "可變層高 - 自動調整"

#: src/slic3r/GUI/GLCanvas3D.cpp:1715
msgid "Variable layer height - Smooth all"
msgstr "可變層高 - 全部平滑"

#: src/slic3r/GUI/GLCanvas3D.cpp:1815
msgid "Project overview"
msgstr ""

#. TRN %1% is a number of the Bed
#: src/slic3r/GUI/GLCanvas3D.cpp:1818 src/slic3r/GUI/GLCanvas3D.cpp:1875
#: src/slic3r/GUI/GLCanvas3D.cpp:1889
#, boost-format
msgid "Bed %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1831 src/slic3r/GUI/GLCanvas3D.cpp:1983
msgid "Filament (g)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1840 src/slic3r/GUI/GLCanvas3D.cpp:1991
msgid "Filament (m)"
msgstr ""

#. TRN %1% is one "Stealth mode" or "Normal mode"
#: src/slic3r/GUI/GLCanvas3D.cpp:1850 src/slic3r/GUI/GLCanvas3D.cpp:1859
#, boost-format
msgid "Estimated Time (%1%)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1976
msgid "Extruders usage breakdown"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1979 src/slic3r/GUI/GLCanvas3D.cpp:2003
#, boost-format
msgid "Extruder %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2046
msgid "Statistics"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2062
msgid "Generating statistics"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2063
msgid "Statistics will be available once all beds are sliced"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2434
msgid "Mirror Object"
msgstr "鏡像模型"

#: src/slic3r/GUI/GLCanvas3D.cpp:4134
msgid "Move Object"
msgstr "移動模型"

#: src/slic3r/GUI/GLCanvas3D.cpp:4781 src/slic3r/GUI/MainFrame.cpp:606
msgid "Switch to Settings"
msgstr "切換到設定"

#: src/slic3r/GUI/GLCanvas3D.cpp:4782 src/slic3r/GUI/MainFrame.cpp:606
msgid "Print Settings Tab"
msgstr "打印設定分頁"

#: src/slic3r/GUI/GLCanvas3D.cpp:4783 src/slic3r/GUI/MainFrame.cpp:607
msgid "Filament Settings Tab"
msgstr "線材設定分頁"

#: src/slic3r/GUI/GLCanvas3D.cpp:4783 src/slic3r/GUI/MainFrame.cpp:607
msgid "Material Settings Tab"
msgstr "材料設定分頁"

#: src/slic3r/GUI/GLCanvas3D.cpp:4784 src/slic3r/GUI/MainFrame.cpp:608
msgid "Printer Settings Tab"
msgstr "打印機設定分頁"

#: src/slic3r/GUI/GLCanvas3D.cpp:4865
msgid "Undo History"
msgstr "取消歷史"

#: src/slic3r/GUI/GLCanvas3D.cpp:4865
msgid "Redo History"
msgstr "重做歷史"

#: src/slic3r/GUI/GLCanvas3D.cpp:4885
#, c-format, boost-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] "取消 %1$d 操作"

#: src/slic3r/GUI/GLCanvas3D.cpp:4885
#, c-format, boost-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] "重做 %1$d 操作"

#: src/slic3r/GUI/GLCanvas3D.cpp:5308
msgid "Add..."
msgstr "增加..."

#: src/slic3r/GUI/GLCanvas3D.cpp:5325 src/slic3r/GUI/KBShortcutsDialog.cpp:110
#: src/slic3r/GUI/Plater.cpp:5431 src/slic3r/GUI/Tab.cpp:4977
msgid "Delete all"
msgstr "全部刪除"

#: src/slic3r/GUI/GLCanvas3D.cpp:5334 src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Arrange selection"
msgstr "佈局選擇"

#: src/slic3r/GUI/GLCanvas3D.cpp:5334
msgid "Click right mouse button to show arrangement options"
msgstr "單擊滑鼠右鍵以顯示佈局選項"

#: src/slic3r/GUI/GLCanvas3D.cpp:5349
msgid "Arrange current bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5350
msgid "Arrange selection on current bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:5370
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:445
msgid "Copy"
msgstr "複製"

#: src/slic3r/GUI/GLCanvas3D.cpp:5379
msgid "Paste"
msgstr "貼上"

#: src/slic3r/GUI/GLCanvas3D.cpp:5391 src/slic3r/GUI/GUI_Factories.cpp:1395
#: src/slic3r/GUI/GUI_Factories.cpp:1419 src/slic3r/GUI/GUI_Factories.cpp:1430
msgid "Add instance"
msgstr "添加實例"

#: src/slic3r/GUI/GLCanvas3D.cpp:5402 src/slic3r/GUI/GUI_Factories.cpp:1398
msgid "Remove instance"
msgstr "刪除實例"

#: src/slic3r/GUI/GLCanvas3D.cpp:5415
msgid "Split to objects"
msgstr "拆開為模型"

#: src/slic3r/GUI/GLCanvas3D.cpp:5425
msgid "Split to parts"
msgstr "拆開為零件"

#: src/slic3r/GUI/GLCanvas3D.cpp:5513 src/slic3r/GUI/GLCanvas3D.cpp:5550
msgid "Click right mouse button to open/close History"
msgstr "點擊滑鼠右鍵打開/關閉歷史記錄"

#: src/slic3r/GUI/GLCanvas3D.cpp:5535
#, boost-format
msgid "Next Undo action: %1%"
msgstr "下一個取消操作：%1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:5550 src/slic3r/GUI/KBShortcutsDialog.cpp:112
#: src/slic3r/GUI/MainFrame.cpp:1626
msgid "Redo"
msgstr "重做"

#: src/slic3r/GUI/GLCanvas3D.cpp:5571
#, boost-format
msgid "Next Redo action: %1%"
msgstr "下一個重做操作：%1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:6403
msgid "Unsliced bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6404 src/slic3r/GUI/Plater.cpp:2551
#: src/slic3r/GUI/Plater.cpp:6448 src/slic3r/GUI/Tab.cpp:1691
#: src/slic3r/GUI/Tab.cpp:5983
msgid "Slicing"
msgstr "切片"

#: src/slic3r/GUI/GLCanvas3D.cpp:6405
msgid "Sliced bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6406
msgid "Object at boundary"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6407 src/slic3r/GUI/Plater.cpp:2534
#: src/slic3r/GUI/Plater.cpp:3446
msgid "Invalid data"
msgstr "無效的資料"

#: src/slic3r/GUI/GLCanvas3D.cpp:6408
msgid "Empty bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6409
msgid "Toolpath exceeds bounds"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6665
msgid "Slice all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6995
msgid "Layer statistics"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6996
#, boost-format
msgid "Layer area: %1% mm²"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6998
#, boost-format
msgid "Area fill: %1% %%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7000
#, boost-format
msgid "Layer time: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7001
#, boost-format
msgid "Time since start: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7396
msgid "An object outside the print area was detected."
msgstr "偵測到打印區域外的模型。"

#: src/slic3r/GUI/GLCanvas3D.cpp:7397
msgid "A toolpath outside the print area was detected."
msgstr "偵測到打印區域外的工具路徑。"

#: src/slic3r/GUI/GLCanvas3D.cpp:7398
msgid "SLA supports outside the print area were detected."
msgstr "偵測到打印區域外的 SLA 支撐材。"

#: src/slic3r/GUI/GLCanvas3D.cpp:7399
msgid "Some objects are not visible during editing."
msgstr "某些模型在編輯區不可見。"

#: src/slic3r/GUI/GLCanvas3D.cpp:7401
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""
"檢測到打印區域外的模型。\n"
"請先解決當前問題再繼續切片。"

#. TRN %3% is name of Object1, %4% is name of Object2
#: src/slic3r/GUI/GLCanvas3D.cpp:7413
#, boost-format
msgid ""
"Conflicts in G-code paths have been detected at layer %1%, z=%2$.2f mm. "
"Please reposition the conflicting objects (%3% <-> %4%) further apart."
msgstr ""

#. TRN: Placeholders contain names of the colliding objects.
#: src/slic3r/GUI/GLCanvas3D.cpp:7423
#, boost-format
msgid "Extruder will crash into %1% while printing %2%."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:7453
msgid "Jump to"
msgstr "跳至"

#: src/slic3r/GUI/GLCanvas3D.cpp:7456
#: src/slic3r/GUI/NotificationManager.cpp:2179
#: src/slic3r/GUI/NotificationManager.cpp:2186
#: src/slic3r/GUI/NotificationManager.cpp:2202
#: src/slic3r/GUI/NotificationManager.cpp:2208
#: src/slic3r/GUI/NotificationManager.cpp:2279
msgid "ERROR:"
msgstr "錯誤："

#: src/slic3r/GUI/GLCanvas3D.cpp:7538
msgid "Selection-Add from rectangle"
msgstr "選擇 - 從矩形中添加"

#: src/slic3r/GUI/GLCanvas3D.cpp:7553
msgid "Selection-Remove from rectangle"
msgstr "選擇 - 從矩形中刪除"

#: src/slic3r/GUI/GUI.cpp:173
msgid "Undefined"
msgstr "未定義"

#: src/slic3r/GUI/GUI.cpp:194
#, boost-format
msgid "%1% was substituted with %2%"
msgstr "%1% 已取代為 %2%"

#: src/slic3r/GUI/GUI.cpp:203
msgid ""
"Most likely the configuration was produced by a newer version of PrusaSlicer "
"or by some PrusaSlicer fork."
msgstr ""
"那個設定很可能是由更新版本的 PrusaSlicer 或某些 PrusaSlicer 分支產生的。"

#: src/slic3r/GUI/GUI.cpp:204
msgid "The following values were substituted:"
msgstr "取代了以下的設定值："

#: src/slic3r/GUI/GUI.cpp:205
msgid "Review the substitutions and adjust them if needed."
msgstr "檢查取代並根據需要進行調整。"

#: src/slic3r/GUI/GUI.cpp:215 src/slic3r/GUI/Sidebar.cpp:405
msgid "SLA print settings"
msgstr "SLA 打印設定"

#: src/slic3r/GUI/GUI.cpp:219 src/slic3r/GUI/MainFrame.cpp:954
#: src/slic3r/GUI/MainFrame.cpp:963
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:241
msgid "Physical Printer"
msgstr "實體打印機"

#: src/slic3r/GUI/GUI.cpp:232
msgid ""
"Configuration bundle was loaded, however some configuration values were not "
"recognized."
msgstr "設定包已經匯入，但無法識別某些設定值。"

#: src/slic3r/GUI/GUI.cpp:242
#, boost-format
msgid ""
"Configuration file \"%1%\" was loaded, however some configuration values "
"were not recognized."
msgstr "設定檔“%1%”已匯入，但無法識別某些設定值。"

#: src/slic3r/GUI/GUI.cpp:431
msgid "The provided name is not valid;"
msgstr "所提供的名稱無效;"

#: src/slic3r/GUI/GUI.cpp:432
msgid "the following characters are not allowed:"
msgstr "不允許使用以下字元："

#: src/slic3r/GUI/GUI_App.cpp:306
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr "基於 Alessandro Ranellucci 和 RepRap 社區的 Slic3r。"

#: src/slic3r/GUI/GUI_App.cpp:307
msgid "Developed by Prusa Research."
msgstr "由 Prusa Research 開發。"

#: src/slic3r/GUI/GUI_App.cpp:308
msgid "Licensed under GNU AGPLv3."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:443
#, boost-format
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""
"從 %1% 2.3 開始，Linux 上的設定目錄已經變更（根據 XDG 基本目錄規範）為\n"
"%2%。\n"
"\n"
"這個目錄目前還不存在（可能你是第一次執行新的版本）。\n"
"但是在 %1% 舊目錄中檢測到舊的設定\n"
"%3%。\n"
"\n"
"可以考慮將舊目錄的內容移動到新位置，以便存取您的設定檔。\n"
"不過請注意，若將來決定降版本 %1%，它將再次使用舊位置。\n"
"\n"
"你現在想要怎麼做？"

#: src/slic3r/GUI/GUI_App.cpp:451
#, c-format, boost-format
msgid "%s - BREAKING CHANGE"
msgstr "%s - 重大變更"

#: src/slic3r/GUI/GUI_App.cpp:453
msgid "Quit, I will move my data now"
msgstr "退出，我現在要移動我的資料"

#: src/slic3r/GUI/GUI_App.cpp:453
msgid "Start the application"
msgstr "啟動套用程式"

#. TRN %s = type of file
#: src/slic3r/GUI/GUI_App.cpp:582
#, c-format, boost-format
msgid "%s files"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:745
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""
"%s 遇到錯誤。這可能是由於記憶體不足所引起的。若您確定您的系統上有足夠的 RAM "
"實體記憶體，那這也可能是一個軟體錯誤，如果您回報這個問題，我們將會很高興。\n"
"\n"
"套用程式現在將終止。"

#: src/slic3r/GUI/GUI_App.cpp:748
msgid "Fatal error"
msgstr "發生嚴重錯誤"

#: src/slic3r/GUI/GUI_App.cpp:752
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""
"PrusaSlicer 遇到了當地語系翻譯錯誤。請向PrusaSlicer 團隊報告，哪些語言是有效"
"的，以及此問題發生在哪個狀況中。謝謝。\n"
"\n"
"現在套用程式將終止。"

#: src/slic3r/GUI/GUI_App.cpp:755
msgid "Critical error"
msgstr "關鍵錯誤"

#: src/slic3r/GUI/GUI_App.cpp:760 src/slic3r/GUI/Jobs/SeqArrangeJob.cpp:67
#, boost-format
msgid "Internal error: %1%"
msgstr "內部錯誤：%1%"

#: src/slic3r/GUI/GUI_App.cpp:1160
#, boost-format
msgid "You are opening %1% version %2%."
msgstr "您正在打開 %1% 版本 %2%。"

#: src/slic3r/GUI/GUI_App.cpp:1163
#, boost-format
msgid ""
"The active configuration was created by <b>%1% %2%</b>,\n"
"while a newer configuration was found in <b>%3%</b>\n"
"created by <b>%1% %4%</b>.\n"
"\n"
"Shall the newer configuration be imported?\n"
"If so, your active configuration will be backed up before importing the new "
"configuration."
msgstr ""
"當前設定由<b>%1% %2%</b>建立，而在<b>%1% %4%</b>建立的<b>%3%</b>中發現了更新"
"的設定。您希望匯入較新的設定嗎？如果是的話，您最好先備份當前設定之後再匯入新"
"的設定。"

#: src/slic3r/GUI/GUI_App.cpp:1171
#, boost-format
msgid ""
"An existing configuration was found in <b>%3%</b>\n"
"created by <b>%1% %2%</b>.\n"
"\n"
"Shall this configuration be imported?"
msgstr ""
"在<b>%1% %2%</b>建立的<b>%3%</b>中找到已有的設定。請問要不要匯入這個設定？"

#: src/slic3r/GUI/GUI_App.cpp:1179
msgid "Import"
msgstr "匯入"

#: src/slic3r/GUI/GUI_App.cpp:1180
msgid "Don't import"
msgstr "不要匯入"

#: src/slic3r/GUI/GUI_App.cpp:1188
msgid "Continue and import newer configuration?"
msgstr "繼續並匯入更新的設定？"

#: src/slic3r/GUI/GUI_App.cpp:1353
msgid ""
"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
"available in the system.\n"
"Please download and install a 64 bit build of PrusaSlicer from https://www."
"prusa3d.cz/prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""
"您正在 64 位 Windows 上運行 32 位版本的 PrusaSlicer。\n"
"PrusaSlicer 的 32 位構建可能無法利用系統中所有可用的 RAM。\n"
"請從 https://www.prusa3d.cz/prusaslicer/ 下載並安裝 64 位版本的 "
"PrusaSlicer。\n"
"你想繼續嗎？"

#: src/slic3r/GUI/GUI_App.cpp:1439
#, c-format, boost-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""
"%s\n"
"你想繼續嗎？"

#: src/slic3r/GUI/GUI_App.cpp:1441 src/slic3r/GUI/GUI_App.cpp:3618
#: src/slic3r/GUI/LoadStepDialog.cpp:64 src/slic3r/GUI/Plater.cpp:356
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:945
msgid "Remember my choice"
msgstr "記住我的選擇"

#: src/slic3r/GUI/GUI_App.cpp:1483
msgid "Loading configuration"
msgstr "匯入設定"

#: src/slic3r/GUI/GUI_App.cpp:1513
#, boost-format
msgid "New prerelease version %1% is available."
msgstr "有新的預發佈版本 %1% 可用。"

#: src/slic3r/GUI/GUI_App.cpp:1514
msgid "See Releases page."
msgstr "請參閱發佈頁面。"

#. TRN Notification text, %1% is list of vendors.
#: src/slic3r/GUI/GUI_App.cpp:1544
#, boost-format
msgid ""
"Update check failed for the following vendors:\n"
"\n"
"%1%\n"
"This may be due to an account logout or a lost connection. Please verify "
"your account status and internet connection. Then select \"Check for "
"Configuration Updates\" to repeat."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1591
msgid "Preparing settings tabs"
msgstr "準備設定分頁"

#: src/slic3r/GUI/GUI_App.cpp:1685 src/slic3r/GUI/Preferences.cpp:442
msgid "Restore window position on start"
msgstr "啟動時恢復視窗位置"

#: src/slic3r/GUI/GUI_App.cpp:1687
msgid "PrusaSlicer started after a crash"
msgstr "PrusaSlicer 在當機後重新啟動"

#: src/slic3r/GUI/GUI_App.cpp:1688
#, boost-format
msgid ""
"PrusaSlicer crashed last time when attempting to set window position.\n"
"We are sorry for the inconvenience, it unfortunately happens with certain "
"multiple-monitor setups.\n"
"More precise reason for the crash: \"%1%\".\n"
"For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n"
"\n"
"To avoid this problem, consider disabling \"%4%\" in \"Preferences\". "
"Otherwise, the application will most likely crash again next time."
msgstr ""
"上次嘗試設定視窗位置時，PrusaSlicer 當機了。\n"
"對於給您帶來的不便，我們深表歉意。不幸的是在某些多顯示器設定下會發生這種情"
"況。\n"
"更詳細的當機原因是：“%1%”。\n"
"有關詳細資訊，請參閱我們的 GitHub 問題追踪器：“%2%”和“%3%”\n"
"\n"
"為避免再次發生此問題，請考慮在“選項”中禁用“%4%”。否則下次套用程式很可能會再次"
"當機。"

#: src/slic3r/GUI/GUI_App.cpp:1700
#, boost-format
msgid "Disable \"%1%\""
msgstr "禁用“%1%”"

#: src/slic3r/GUI/GUI_App.cpp:1701
#, boost-format
msgid "Leave \"%1%\" enabled"
msgstr "啟用“%1%”"

#: src/slic3r/GUI/GUI_App.cpp:2119
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr "您有以下預設，其中包含“打印主機上傳”的已儲存選項"

#: src/slic3r/GUI/GUI_App.cpp:2123
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""
"但由於此版本的PrusaSlicer 許可證，我們不再在打印機設定中顯示此資訊。\n"
"這個設定將在實體打印機的設定中提供。"

#: src/slic3r/GUI/GUI_App.cpp:2125
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""
"預設情況下，新打印機設備在建立期間將被命名為“打印機 N”。\n"
"注意：以後可以從實體打印機設定中變更此名稱"

#: src/slic3r/GUI/GUI_App.cpp:2129
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:1009
msgid "Information"
msgstr "相關資訊"

#: src/slic3r/GUI/GUI_App.cpp:2142 src/slic3r/GUI/GUI_App.cpp:2153
msgid "Recreating"
msgstr "重建"

#: src/slic3r/GUI/GUI_App.cpp:2156
msgid "Loading of current presets"
msgstr "匯入當前預設"

#: src/slic3r/GUI/GUI_App.cpp:2161
msgid "Loading of a mode view"
msgstr "匯入檢視模式"

#: src/slic3r/GUI/GUI_App.cpp:2300
msgid "Choose one file (3MF/AMF):"
msgstr "選擇一個檔案（3MF/AMF）："

#: src/slic3r/GUI/GUI_App.cpp:2312
msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/SVG):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2323
msgid "Choose ZIP file"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2335
msgid "Choose one file (GCODE/GCO/G/BGCODE/BGC/NGC):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2346
msgid "Changing of an application language"
msgstr "變更套用程式語言"

#: src/slic3r/GUI/GUI_App.cpp:2490
msgid "Select the language"
msgstr "選擇語言"

#: src/slic3r/GUI/GUI_App.cpp:2490
msgid "Language"
msgstr "語言"

#: src/slic3r/GUI/GUI_App.cpp:2647
msgid "modified"
msgstr "修改"

#: src/slic3r/GUI/GUI_App.cpp:2686
msgid ""
"Simple mode supports manipulation with single-part object(s)\n"
"or object(s) with support modifiers only."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2688
msgid "Please check your object list before mode changing."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2689
msgid "Change application mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2721
#, c-format, boost-format
msgid "Run %s"
msgstr "執行 [%s]"

#: src/slic3r/GUI/GUI_App.cpp:2725
msgid "&Configuration Snapshots"
msgstr "設定快照(&C)"

#: src/slic3r/GUI/GUI_App.cpp:2725
msgid "Inspect / activate configuration snapshots"
msgstr "檢查/啟動設定快照"

#: src/slic3r/GUI/GUI_App.cpp:2726
msgid "Take Configuration &Snapshot"
msgstr "取得設定和快照(&S)"

#: src/slic3r/GUI/GUI_App.cpp:2726
msgid "Capture a configuration snapshot"
msgstr "擷取設定快照"

#: src/slic3r/GUI/GUI_App.cpp:2727
msgid "Check for Configuration Updates"
msgstr "檢查設定更新"

#: src/slic3r/GUI/GUI_App.cpp:2727
msgid "Check for configuration updates"
msgstr "檢查設定更新"

#: src/slic3r/GUI/GUI_App.cpp:2728
msgid "Check for Application Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2728
msgid "Check for new version of application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2736 src/slic3r/GUI/GUI_App.cpp:2738
msgid "&Preferences"
msgstr "選項(&P)"

#: src/slic3r/GUI/GUI_App.cpp:2736 src/slic3r/GUI/GUI_App.cpp:2738
msgid "Application preferences"
msgstr "套用程式偏好"

#: src/slic3r/GUI/GUI_App.cpp:2743
msgid "&Language"
msgstr "語言(&L)"

#: src/slic3r/GUI/GUI_App.cpp:2746
msgid "Flash Printer &Firmware"
msgstr "燒錄打印機韌體(&F)"

#: src/slic3r/GUI/GUI_App.cpp:2746
msgid "Upload a firmware image into an Arduino based printer"
msgstr "將韌體影像檔上傳到基於 Arduino 的打印機"

#: src/slic3r/GUI/GUI_App.cpp:2750
msgid "Wi-Fi Configuration File"
msgstr ""

#. TRN Wifi config dialog explanation line 1.
#: src/slic3r/GUI/GUI_App.cpp:2750 src/slic3r/GUI/WifiConfigDialog.cpp:51
msgid ""
"Generate a file to be loaded by a Prusa printer to configure its Wi-Fi "
"connection."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2770
msgid "Taking a configuration snapshot"
msgstr "取得設定快照"

#: src/slic3r/GUI/GUI_App.cpp:2771
msgid ""
"Some presets are modified and the unsaved changes will not be captured by "
"the configuration snapshot."
msgstr "一些預設值已被修改，未儲存的變更不會被設定快照擷取。"

#: src/slic3r/GUI/GUI_App.cpp:2772
msgid "Snapshot name"
msgstr "快照名稱"

#: src/slic3r/GUI/GUI_App.cpp:2788
msgid "Loading a configuration snapshot"
msgstr "匯入設定快照"

#: src/slic3r/GUI/GUI_App.cpp:2797
#, boost-format
msgid "Continue to activate a configuration snapshot %1%?"
msgstr "要繼續啟動設定快照 %1% 嗎？"

#: src/slic3r/GUI/GUI_App.cpp:2811
msgid "Failed to activate configuration snapshot."
msgstr "無法啟動設定快照。"

#: src/slic3r/GUI/GUI_App.cpp:2831
msgid "Language selection"
msgstr "語言選擇"

#: src/slic3r/GUI/GUI_App.cpp:2834
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""
"切換語言將觸發套用程式重啟。\n"
"若您不先儲存的話將失去未儲存的內容。"

#: src/slic3r/GUI/GUI_App.cpp:2836 src/slic3r/GUI/Preferences.cpp:774
#: src/slic3r/GUI/Selection.cpp:1506
msgid "Do you want to proceed?"
msgstr "您想繼續嗎？"

#: src/slic3r/GUI/GUI_App.cpp:2875
msgid "Restart application"
msgstr "重新啟動套用程式"

#: src/slic3r/GUI/GUI_App.cpp:3039
msgid "For new project all modifications will be reseted"
msgstr "對於新項目，所有修改都將被重置"

#: src/slic3r/GUI/GUI_App.cpp:3077
msgid "Loading a new project while the current project is modified."
msgstr "在修改當前項目時匯入新項目。"

#: src/slic3r/GUI/GUI_App.cpp:3080
msgid "Project is loading"
msgstr "項目正在匯入"

#: src/slic3r/GUI/GUI_App.cpp:3080
msgid "Opening new project while some presets are unsaved."
msgstr "在不儲存某些預設的情況下打開新項目。"

#: src/slic3r/GUI/GUI_App.cpp:3099
msgid "The uploads are still ongoing"
msgstr "上傳仍在進行中"

#: src/slic3r/GUI/GUI_App.cpp:3099
msgid "Stop them and continue anyway?"
msgstr "您要停止它們並繼續嗎？"

#: src/slic3r/GUI/GUI_App.cpp:3103
msgid "Ongoing uploads"
msgstr "持續上傳"

#: src/slic3r/GUI/GUI_App.cpp:3353
msgid ""
"It's impossible to print object(s) which contains parameter modifiers with "
"SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3354 src/slic3r/GUI/Jobs/SLAImportJob.cpp:153
msgid "Please check your object list before preset changing."
msgstr "請在變更預設之前檢查您的模型列表。"

#. TRN: Progress dialog title
#: src/slic3r/GUI/GUI_App.cpp:3369 src/slic3r/GUI/UpdateDialogs.cpp:281
msgid "Opening Configuration Wizard"
msgstr "打開設定嚮導"

#: src/slic3r/GUI/GUI_App.cpp:3417
#, boost-format
msgid "Welcome to %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3419
#, boost-format
msgid ""
"Do you wish to register downloads from <b>Printables.com</b>\n"
"for this <b>%1% %2%</b> executable?\n"
"\n"
"Downloads can be registered for only 1 executable at time."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3447
msgid "Select a gcode file:"
msgstr "請選擇一個 Gcode 檔案："

#: src/slic3r/GUI/GUI_App.cpp:3617 src/slic3r/GUI/GUI_App.cpp:3637
msgid "Open hyperlink in default browser?"
msgstr "在預設瀏覽器中打開超連結？"

#: src/slic3r/GUI/GUI_App.cpp:3617 src/slic3r/GUI/GUI_App.cpp:3637
msgid "PrusaSlicer: Open hyperlink"
msgstr "PrusaSlicer：打開超連結"

#: src/slic3r/GUI/GUI_App.cpp:3622 src/slic3r/GUI/Preferences.cpp:626
msgid "Suppress to open hyperlink in browser"
msgstr "禁止在瀏覽器中打開超連結"

#: src/slic3r/GUI/GUI_App.cpp:3624 src/slic3r/GUI/MainFrame.cpp:641
#: src/slic3r/GUI/Plater.cpp:362
msgid "PrusaSlicer will remember your choice."
msgstr "PrusaSlicer 會記住您的選擇。"

#: src/slic3r/GUI/GUI_App.cpp:3625
msgid "You will not be asked about it again on hyperlinks hovering."
msgstr "停留中的超連結將不會再次詢問您。"

#: src/slic3r/GUI/GUI_App.cpp:3626 src/slic3r/GUI/MainFrame.cpp:642
#: src/slic3r/GUI/Plater.cpp:366
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to changes your choice."
msgstr ""
"進入“選項”中並選取“%1%”\n"
"以改變你的選擇。"

#: src/slic3r/GUI/GUI_App.cpp:3628 src/slic3r/GUI/MainFrame.cpp:644
#: src/slic3r/GUI/Plater.cpp:368 src/slic3r/GUI/UnsavedChangesDialog.cpp:962
msgid "PrusaSlicer: Don't ask me again"
msgstr "PrusaSlicer：別再問我了"

#: src/slic3r/GUI/GUI_App.cpp:3679
msgid ""
"Open default browser with Prusa Account Log in page?\n"
"(If you select 'Yes', you will not be asked again.)"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3679
msgid "PrusaSlicer: Open Log in page"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3747
msgid "Check for application update has failed."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3748
#, boost-format
msgid "You are currently running the latest released version %1%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3751
#, boost-format
msgid ""
"There are no new released versions online. The latest release version is %1%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3816
#, boost-format
msgid "Downloading %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3826
msgid "Downloading of the new version is in progress. Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3854 src/slic3r/GUI/GUI_App.cpp:4198
#: src/slic3r/GUI/GUI_App.cpp:4213
msgid ""
"Could not start URL download. Destination folder is not set. Please choose "
"destination folder in Configuration Wizard."
msgstr ""

#. TRN Text of notification when Slicer starts and usb stick with printer settings ini file is present
#: src/slic3r/GUI/GUI_App.cpp:3876 src/slic3r/GUI/Plater.cpp:855
msgid "Printer configuration file detected on removable media."
msgstr ""

#. TRN Text of hypertext of notification when Slicer starts and usb stick with printer settings ini file is present
#: src/slic3r/GUI/GUI_App.cpp:3878 src/slic3r/GUI/Plater.cpp:857
msgid "Write Wi-Fi credentials."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:4032
#, boost-format
msgid ""
"Installed and selected printer:\n"
"%1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:4033
#, boost-format
msgid ""
"Selected printer:\n"
"%1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:4034
#, boost-format
msgid ""
"Printer not found:\n"
"%1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:4082 src/slic3r/GUI/GUI_App.cpp:4100
#, boost-format
msgid "Extruder %1%: Selected filament %2%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:4116
#, boost-format
msgid "Extruder %1%: Installed and selected filament %2%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:4120
#, boost-format
msgid "Extruder %2%: Failed to find and select filament type: %1%"
msgstr ""

#. TRN: Notification text.
#: src/slic3r/GUI/GUI_App.cpp:4139
msgid "Failed to select filament from Connect."
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:98
msgid "Pad and Support"
msgstr "墊片和支撐"

#: src/slic3r/GUI/GUI_Factories.cpp:192
msgid "Add part"
msgstr "添加部分"

#: src/slic3r/GUI/GUI_Factories.cpp:193
msgid "Add negative volume"
msgstr "添加挖孔模型"

#: src/slic3r/GUI/GUI_Factories.cpp:194
msgid "Add modifier"
msgstr "添加修改器"

#: src/slic3r/GUI/GUI_Factories.cpp:195
msgid "Add support blocker"
msgstr "添加阻斷支撐區域"

#: src/slic3r/GUI/GUI_Factories.cpp:196
msgid "Add support enforcer"
msgstr "添加支撐區域"

#: src/slic3r/GUI/GUI_Factories.cpp:202
msgid "Add text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:203
msgid "Add negative text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:204
msgid "Add text modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:208
msgid "Add SVG part"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:209
msgid "Add negative SVG"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:210
msgid "Add SVG modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:346
msgid "Select showing settings"
msgstr "選擇顯示設定"

#: src/slic3r/GUI/GUI_Factories.cpp:453 src/slic3r/GUI/GUI_Factories.cpp:458
#: src/slic3r/GUI/GUI_Factories.cpp:713 src/slic3r/GUI/GUI_Factories.cpp:719
#, c-format, boost-format
msgid "Quick Add Settings (%s)"
msgstr "快速添加設定 (%s)"

#: src/slic3r/GUI/GUI_Factories.cpp:514
msgid "The following model was repaired successfully"
msgid_plural "The following models were repaired successfully"
msgstr[0] "以下模型修復完成"

#: src/slic3r/GUI/GUI_Factories.cpp:520
msgid "Folowing model repair failed"
msgid_plural "Folowing models repair failed"
msgstr[0] "以下模型修復失敗"

#: src/slic3r/GUI/GUI_Factories.cpp:525
msgid "Repairing was canceled"
msgstr "已取消修復"

#: src/slic3r/GUI/GUI_Factories.cpp:532
msgid "Remove the selected object"
msgstr "移除所選模型"

#: src/slic3r/GUI/GUI_Factories.cpp:547 src/slic3r/GUI/UpdatesUIManager.cpp:94
msgid "Load"
msgstr "匯入"

#: src/slic3r/GUI/GUI_Factories.cpp:553 src/slic3r/GUI/GUI_Factories.cpp:654
#: src/slic3r/GUI/GUI_Factories.cpp:658
msgid "Box"
msgstr "方盒"

#: src/slic3r/GUI/GUI_Factories.cpp:553
msgid "Cylinder"
msgstr "圓筒"

#: src/slic3r/GUI/GUI_Factories.cpp:553
msgid "Slab"
msgstr "平板"

#: src/slic3r/GUI/GUI_Factories.cpp:566
msgid "Gallery"
msgstr "圖庫"

#: src/slic3r/GUI/GUI_Factories.cpp:617 src/slic3r/GUI/GUI_Factories.cpp:637
#: src/slic3r/GUI/GUI_ObjectList.cpp:692
msgid "Text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:643 src/slic3r/GUI/GUI_Factories.cpp:646
#: src/slic3r/GUI/GUI_Factories.cpp:683
msgid "Height range Modifier"
msgstr "高度範圍修改器"

#: src/slic3r/GUI/GUI_Factories.cpp:692
msgid "Add settings"
msgstr "添加設定"

#: src/slic3r/GUI/GUI_Factories.cpp:783
msgid "Change type"
msgstr "變更類型"

#: src/slic3r/GUI/GUI_Factories.cpp:793 src/slic3r/GUI/GUI_Factories.cpp:805
msgid "Set as a Separated Object"
msgstr "設定為分離模型"

#: src/slic3r/GUI/GUI_Factories.cpp:805
msgid "Set as a Separated Objects"
msgstr "設定為分離模型"

#: src/slic3r/GUI/GUI_Factories.cpp:815
msgid "Printable"
msgstr "可打印"

#: src/slic3r/GUI/GUI_Factories.cpp:851 src/slic3r/GUI/GUI_ObjectList.cpp:2043
#: src/slic3r/GUI/GUI_ObjectList.cpp:2537
msgid "Invalidate cut info"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:866
msgid "Rename"
msgstr "重新命名"

#: src/slic3r/GUI/GUI_Factories.cpp:876 src/slic3r/GUI/GUI_ObjectList.cpp:4684
msgid "Fix by Windows repair algorithm"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:895
msgid "Export as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:906
msgid "Reload the selected volumes from disk"
msgstr "從磁碟機重新匯入選定的模型"

#: src/slic3r/GUI/GUI_Factories.cpp:913 src/slic3r/GUI/Plater.cpp:2798
msgid "Replace with STL"
msgstr "取代為 STL"

#: src/slic3r/GUI/GUI_Factories.cpp:913
msgid "Replace the selected volume with new STL"
msgstr "用新的 STL 取代選定的模型"

#: src/slic3r/GUI/GUI_Factories.cpp:920
msgid "Set extruder for selected items"
msgstr "為所選的項目設定擠出機"

#: src/slic3r/GUI/GUI_Factories.cpp:967
msgid "Use another extruder"
msgstr "使用另一個擠出機"

#: src/slic3r/GUI/GUI_Factories.cpp:975
msgid "Scale to print volume"
msgstr "縮放至最大可打印尺寸"

#: src/slic3r/GUI/GUI_Factories.cpp:975
msgid "Scale the selected object to fit the print volume"
msgstr "調整選取的模型以適合打印尺寸"

#: src/slic3r/GUI/GUI_Factories.cpp:1017 src/slic3r/GUI/Plater.cpp:5655
msgid "Convert from imperial units"
msgstr "從英制單位轉換"

#: src/slic3r/GUI/GUI_Factories.cpp:1018 src/slic3r/GUI/Plater.cpp:5656
msgid "Revert conversion from imperial units"
msgstr "恢復英制單位轉換"

#: src/slic3r/GUI/GUI_Factories.cpp:1019 src/slic3r/GUI/Plater.cpp:5657
msgid "Convert from meters"
msgstr "從美制單位轉換"

#: src/slic3r/GUI/GUI_Factories.cpp:1020 src/slic3r/GUI/Plater.cpp:5657
msgid "Revert conversion from meters"
msgstr "恢復美制單位轉換"

#: src/slic3r/GUI/GUI_Factories.cpp:1041
msgid "Merge objects to the one multipart object"
msgstr "將多個模型合併成為一個包含多部分的模型"

#: src/slic3r/GUI/GUI_Factories.cpp:1060
msgid "Along X axis"
msgstr "沿 X 軸"

#: src/slic3r/GUI/GUI_Factories.cpp:1060
msgid "Mirror the selected object along the X axis"
msgstr "沿 X 軸鏡像所選模型"

#: src/slic3r/GUI/GUI_Factories.cpp:1062
msgid "Along Y axis"
msgstr "沿 Y 軸"

#: src/slic3r/GUI/GUI_Factories.cpp:1062
msgid "Mirror the selected object along the Y axis"
msgstr "沿 Y 軸鏡像所選模型"

#: src/slic3r/GUI/GUI_Factories.cpp:1064
msgid "Along Z axis"
msgstr "沿 Z 軸"

#: src/slic3r/GUI/GUI_Factories.cpp:1064
msgid "Mirror the selected object along the Z axis"
msgstr "沿 Z 軸鏡像所選模型"

#: src/slic3r/GUI/GUI_Factories.cpp:1067
msgid "Mirror the selected object"
msgstr "鏡像所選模型"

#: src/slic3r/GUI/GUI_Factories.cpp:1073
msgid "Edit text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1098
msgid "Ability to change text, font, size, ..."
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1111
msgid "Edit SVG"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1135
msgid "Change SVG source file, projection, size, ..."
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1158 src/slic3r/GUI/GUI_ObjectList.cpp:1769
msgid "Add Shape"
msgstr "添加形狀"

#: src/slic3r/GUI/GUI_Factories.cpp:1196
msgid "To objects"
msgstr "到模型"

#: src/slic3r/GUI/GUI_Factories.cpp:1196
msgid "Split the selected object into individual objects"
msgstr "將所選模型拆開為單個模型"

#: src/slic3r/GUI/GUI_Factories.cpp:1199
msgid "To parts"
msgstr "到零件"

#: src/slic3r/GUI/GUI_Factories.cpp:1199 src/slic3r/GUI/GUI_Factories.cpp:1234
msgid "Split the selected object into individual parts"
msgstr "將所選模型拆開為單獨的零件"

#: src/slic3r/GUI/GUI_Factories.cpp:1203
msgid "Split the selected object"
msgstr "拆開所選模型"

#: src/slic3r/GUI/GUI_Factories.cpp:1383 src/slic3r/GUI/GUI_Factories.cpp:1401
msgid "Set number of instances"
msgstr "設定實例數量"

#: src/slic3r/GUI/GUI_Factories.cpp:1383
msgid "Change the number of instances of the selected objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1395
msgid "Add one more instance of the selected object"
msgstr "添加所選模型的另一個實例"

#: src/slic3r/GUI/GUI_Factories.cpp:1398
msgid "Remove one instance of the selected object"
msgstr "刪除所選模型的一個實例"

#: src/slic3r/GUI/GUI_Factories.cpp:1401
msgid "Change the number of instances of the selected object"
msgstr "變更所選模型的實例數量"

#: src/slic3r/GUI/GUI_Factories.cpp:1405
msgid "Fill bed with instances"
msgstr "用實例填滿整個載台"

#: src/slic3r/GUI/GUI_Factories.cpp:1405
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr "用所選模型的實例填滿載台的剩餘區域"

#: src/slic3r/GUI/GUI_Init.cpp:74 src/slic3r/GUI/GUI_Init.cpp:77
msgid "PrusaSlicer GUI initialization failed"
msgstr "PrusaSlicer GUI 初始化失敗"

#: src/slic3r/GUI/GUI_Init.cpp:77
#, boost-format
msgid "Fatal error, exception catched: %1%"
msgstr "致命錯誤，收到異常狀態：%1%"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:33
msgid "Start at height"
msgstr "從高處開始"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:33
msgid "Stop at height"
msgstr "停在高處"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
msgid "Remove layer range"
msgstr "移除打印層範圍"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:168
msgid "Add layer range"
msgstr "添加打印層範圍"

#. TRN: This string appears in Configuration Wizard in the 'Configuration Manager' step.
#: src/slic3r/GUI/GUI_ObjectList.cpp:355
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:181
#: src/slic3r/GUI/UpdatesUIManager.cpp:143
#: src/slic3r/GUI/UpdatesUIManager.cpp:198
msgid "Name"
msgstr "名稱"

#: src/slic3r/GUI/GUI_ObjectList.cpp:374 src/slic3r/GUI/GUI_ObjectList.cpp:545
msgid "Editing"
msgstr "編輯"

#: src/slic3r/GUI/GUI_ObjectList.cpp:455
msgid "Invalid object part index"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:465
msgid "No errors detected"
msgstr "未檢測到錯誤"

#: src/slic3r/GUI/GUI_ObjectList.cpp:474
#, c-format, boost-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] "自動修復 %1$d 錯誤"

#: src/slic3r/GUI/GUI_ObjectList.cpp:480
#, c-format, boost-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] "%1$d 退化面"

#: src/slic3r/GUI/GUI_ObjectList.cpp:482
#, c-format, boost-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] "%1$d 固定邊"

#: src/slic3r/GUI/GUI_ObjectList.cpp:484
#, c-format, boost-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] "%1$d 面已移除"

#: src/slic3r/GUI/GUI_ObjectList.cpp:486
#, c-format, boost-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] "%1$d 反轉面"

#: src/slic3r/GUI/GUI_ObjectList.cpp:488
#, c-format, boost-format
msgid "%1$d backward edge"
msgid_plural "%1$d backward edges"
msgstr[0] "%1$d 邊緣後退"

#: src/slic3r/GUI/GUI_ObjectList.cpp:491 src/slic3r/GUI/GUI_ObjectList.cpp:494
#, c-format, boost-format
msgid "%1$d open edge"
msgid_plural "%1$d open edges"
msgstr[0] "%1$d 邊緣開放"

#: src/slic3r/GUI/GUI_ObjectList.cpp:493
msgid "Remaining errors"
msgstr "剩餘的錯誤"

#: src/slic3r/GUI/GUI_ObjectList.cpp:501
msgid "Right button click the icon to fix STL by Windows repair algorithm"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:547
msgid "Right button click the icon to change the object settings"
msgstr "按滑鼠右鍵單擊圖示以變更模型設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:549
msgid "Click the icon to change the object settings"
msgstr "單擊圖示以變更模型設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:553
msgid "Right button click the icon to change the object printable property"
msgstr "按滑鼠右鍵單擊圖示以變更模型的可打印屬性"

#: src/slic3r/GUI/GUI_ObjectList.cpp:555
msgid "Click the icon to change the object printable property"
msgstr "單擊圖示可變更模型的可打印屬性"

#: src/slic3r/GUI/GUI_ObjectList.cpp:681
msgid "Change Extruder"
msgstr "變更擠出機"

#: src/slic3r/GUI/GUI_ObjectList.cpp:701
msgid "Rename Object"
msgstr "重命名模型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:701
msgid "Rename Sub-object"
msgstr "重命名子模型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1369
#: src/slic3r/GUI/GUI_ObjectList.cpp:4562
msgid "Instances to Separated Objects"
msgstr "分離模型的實例"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1375
msgid "Volumes in Object reordered"
msgstr "模型中的模型重新排序"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1375
msgid "Object reordered"
msgstr "模型重新排序"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1425
msgid "Add Settings for Layers"
msgstr "添加打印層設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1426
msgid "Add Settings for Sub-object"
msgstr "為子模型添加設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1427
msgid "Add Settings for Object"
msgstr "添加模型設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1466
msgid "Add Settings Bundle for Height range"
msgstr "為高度範圍添加設定包"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1467
msgid "Add Settings Bundle for Sub-object"
msgstr "為子模型添加設定包"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1468
msgid "Add Settings Bundle for Object"
msgstr "為模型添加設定包"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1548
msgid "Load Part"
msgstr "匯入零件"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1548
msgid "Load Modifier"
msgstr "匯入修改器"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1607 src/slic3r/GUI/Plater.cpp:1333
msgid "Loading file"
msgstr "匯入檔案中"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1615 src/slic3r/GUI/Plater.cpp:1344
msgid "Error!"
msgstr "錯誤！"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1707
msgid "Add Generic Subobject"
msgstr "添加一般子模型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1737
msgid "Generic"
msgstr "一般"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1802
msgid "Add Shape from Gallery"
msgstr "從圖庫中添加形狀"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1802
msgid "Add Shapes from Gallery"
msgstr "從圖庫中添加形狀"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1912
msgid "Remove paint-on supports"
msgstr "移除繪製的支撐"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1919
msgid "Remove paint-on seam"
msgstr "移除繪製的接縫"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1933
msgid "Remove Multi Material painting"
msgstr "移除繪製的多個材質"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1940
msgid "Remove paint-on fuzzy skin"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1946
msgid "Shift objects to bed"
msgstr "將模型轉移到載台上"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1952
msgid "Remove variable layer height"
msgstr "移除可變層高"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1973
msgid "Delete Settings"
msgstr "刪除設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1997
msgid "Delete All Instances from Object"
msgstr "從模型中刪除所有實例"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2013
msgid "Delete Height Range"
msgstr "刪除高度範圍"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2031
msgid "Delete connector from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2032
msgid "Delete solid part from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2033
msgid "Delete negative volume from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2035
msgid ""
"To save cut information you can delete all connectors from all related "
"objects."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2038
msgid ""
"This action will break a cut information.\n"
"After that PrusaSlicer can't guarantee model consistency."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2040
msgid ""
"To manipulate with solid parts or negative volumes you have to invalidate "
"cut information first."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2045
#: src/slic3r/GUI/GUI_ObjectList.cpp:2567
msgid "Delete all connectors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2076
msgid "From Object List You can't delete the last solid part from object."
msgstr "在模型列表裡您不能從模型中刪除最後一個實體部分。"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2085
msgid "Delete Subobject"
msgstr "刪除子模型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2111
msgid "Last instance of an object cannot be deleted."
msgstr "無法刪除模型的最後一個實例。"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2115
msgid "Instance cannot be deleted from cut object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2119
msgid "Delete Instance"
msgstr "刪除實例"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2143
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr "所選模型無法拆開，因為它只包含一個部分。"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2147
msgid "Split to Parts"
msgstr "拆開為個別零件"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2150
msgid ""
"Custom supports, seams, fuzzy skin and multi-material painting were removed "
"after splitting the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2270
msgid "Merged"
msgstr "合併"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2345
msgid "Merge all parts to the one single object"
msgstr "將所有零件合併為一個模型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2377
msgid "Add Layers"
msgstr "新增打印層"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2652
msgid "Connectors information"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2662
#: src/slic3r/GUI/GUI_ObjectList.cpp:2727
msgid "Object manipulation"
msgstr "模型操作"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2672
msgid "Group manipulation"
msgstr "群組操作"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2765
msgid "Object Settings to modify"
msgstr "要修改的模型設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2769
msgid "Part Settings to modify"
msgstr "要修改的模型設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2774
msgid "Layer range Settings to modify"
msgstr "打印層範圍設定修改"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2780
msgid "Part manipulation"
msgstr "零件操作"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2788
msgid "Instance manipulation"
msgstr "實例操作"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2796
msgid "Height ranges"
msgstr "高度範圍"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2796
msgid "Settings for height range"
msgstr "高度範圍設定"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3336
msgid "Delete Selected"
msgstr "刪除所選"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3414
#: src/slic3r/GUI/GUI_ObjectList.cpp:3442
#: src/slic3r/GUI/GUI_ObjectList.cpp:3462
msgid "Add Height Range"
msgstr "添加高度範圍"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3508
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""
"無法在當前打印層範圍後插入新的打印層範圍。\n"
"下一層範圍太薄，不能一分為二\n"
"因為不能違反最小層高。"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3512
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""
"無法在當前打印層範圍和下一個打印層範圍之間插入新的打印層範圍。\n"
"當前打印層範圍和下一個打印層範圍之間的差距\n"
"因為比允許的最小層高更薄。"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3517
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""
"無法在當前打印層範圍後插入新的打印層範圍。\n"
"因為當前打印層範圍與下一個打印層範圍重疊。"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3576
msgid "Edit Height Range"
msgstr "編輯高度範圍"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3958
msgid "Selection-Remove from list"
msgstr "選擇-從列表中移除"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3970
msgid "Selection-Add from list"
msgstr "選擇-從列表中添加"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4109
msgid "Object or Instance"
msgstr "模型或實例"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4112
msgid "Unsupported selection"
msgstr "不被支援的選擇"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4113
#, c-format, boost-format
msgid "You started your selection with %s Item."
msgstr "您從 %s 項開始選擇。"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4114
#, c-format, boost-format
msgid "In this mode you can select only other %s Items%s"
msgstr "在此模式下，您只能選擇其他 %s 項%s"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4117
msgid "of a current Object"
msgstr "當前模型的"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4122
#: src/slic3r/GUI/GUI_ObjectList.cpp:4197 src/slic3r/GUI/Sidebar.cpp:93
msgid "Info"
msgstr "資訊"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4302
msgid "Negative Volume"
msgstr "挖孔模型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4315
msgid "Support Blocker"
msgstr "支撐阻斷器"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4315
msgid "Support Enforcer"
msgstr "執行支撐"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4325
msgid "Select type of part"
msgstr "選擇零件類型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4331
msgid "Change Part Type"
msgstr "變更零件類型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4592
msgid "Enter new name"
msgstr "輸入新名稱"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4592
msgid "Renaming"
msgstr "重新命名"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4654
msgid "Repairing model"
msgstr "修復模型"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4664
msgid ""
"Custom supports, seams, fuzzy skin and multimaterial painting were removed "
"after repairing the mesh."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4831
msgid "Change Extruders"
msgstr "取代擠出機"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4957
msgid "Set Printable group"
msgstr "設定可打印群組"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4957
msgid "Set Unprintable group"
msgstr "設定不可打印群組"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4959
msgid "Set Printable"
msgstr "設定為可打印"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4959
msgid "Set Unprintable"
msgstr "設定為不可打印"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4960
msgid "Set Printable Instance"
msgstr "設定為可打印實例"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4960
msgid "Set Unprintable Instance"
msgstr "設定為不可打印實例"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:102
msgid "Select coordinate space, in which the transformation will be performed."
msgstr "選擇座標空間，並在其中進行轉換。"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:258
msgid "Size [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:290
#, boost-format
msgid "Mirror along %1% axis"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:355
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:370
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:376
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:386
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:392
msgid "Drop to bed"
msgstr "下降至載台"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:433
msgid "Reset Rotation"
msgstr "重置旋轉"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:483
msgid "Skew [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:494
msgid "Reset skew"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:500
msgid "Inches"
msgstr "英吋"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:659
msgid "Scale factors"
msgstr "比例因子"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:670
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:675
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:703
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:711
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:719
msgid "Rotate (relative)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:674
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:710
msgid "Translate (relative) [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:729
msgid "Translate"
msgstr "翻譯"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:848
msgid "Left handed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:910
msgid "World coordinates"
msgstr "世界坐標"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:911
msgid "Object coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:912
msgid "Part coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:962
msgid "Set Position"
msgstr "設定位置"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:995
msgid "Set Orientation"
msgstr "設定方向"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1084
msgid "Set Scale"
msgstr "設定比例"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1100
msgid "Set Size"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:68
msgid "Additional Settings"
msgstr "額外設定"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:104
msgid "Remove parameter"
msgstr "移除參數"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:110
#, c-format, boost-format
msgid "Delete Option %s"
msgstr "刪除選項 %s"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:159
#, c-format, boost-format
msgid "Change Option %s"
msgstr "變更選項 %s"

#: src/slic3r/GUI/GUI_Preview.cpp:450
msgid "Enter custom G-code used on current layer"
msgstr "輸入當前層上要使用的自定義 G-code"

#: src/slic3r/GUI/GUI_Preview.cpp:451
#, boost-format
msgid "Custom G-code on current layer (%1% mm)."
msgstr "輸入當前層(%1% mm)上要使用的自定義 G-code。"

#: src/slic3r/GUI/GUI_Preview.cpp:472
msgid "Enter short message shown on Printer display when a print is paused"
msgstr "輸入暫停打印時打印機螢幕上顯示的訊息"

#: src/slic3r/GUI/GUI_Preview.cpp:473
#, boost-format
msgid "Message for pause print on current layer (%1% mm)."
msgstr "在當前層 (%1% mm) 上暫停打印的訊息。"

#: src/slic3r/GUI/GUI_Preview.cpp:722
msgid "NOTE:"
msgstr "備註："

#: src/slic3r/GUI/GUI_Preview.cpp:723
#, boost-format
msgid "Sliced object \"%1%\" looks like a logo or a sign"
msgstr "切片模型“%1%”看起來像徽標或標誌"

#: src/slic3r/GUI/GUI_Preview.cpp:724
msgid "Apply color change automatically"
msgstr "自動套用顏色變化"

#: src/slic3r/GUI/HintNotification.cpp:778
#: src/slic3r/GUI/HintNotification.cpp:804
#: src/slic3r/GUI/NotificationManager.cpp:469
#: src/slic3r/GUI/NotificationManager.cpp:486
msgid "More"
msgstr "更多"

#: src/slic3r/GUI/HintNotification.cpp:919
msgid "Open Preferences."
msgstr "打開選項。"

#: src/slic3r/GUI/HintNotification.cpp:1011
msgid "Open Documentation in web browser."
msgstr "在 Web 瀏覽器中打開文檔。"

#: src/slic3r/GUI/ImGuiWrapper.cpp:507
msgid "Edit"
msgstr "編輯"

#: src/slic3r/GUI/ImGuiWrapper.cpp:877 src/slic3r/GUI/Search.cpp:615
msgid "Use for search"
msgstr "用於搜尋"

#: src/slic3r/GUI/ImGuiWrapper.cpp:878 src/slic3r/GUI/Search.cpp:608
msgid "Category"
msgstr "類別"

#: src/slic3r/GUI/ImGuiWrapper.cpp:880 src/slic3r/GUI/Search.cpp:610
msgid "Search in English"
msgstr "用英文搜尋"

#: src/slic3r/GUI/Jobs/ArrangeJob2.cpp:282
msgid "Filling bed"
msgstr "填滿載台"

#: src/slic3r/GUI/Jobs/ArrangeJob2.cpp:284
msgid "Arranging"
msgstr "佈局中"

#: src/slic3r/GUI/Jobs/SeqArrangeJob.cpp:30
msgid "Arranging for sequential print"
msgstr ""

#: src/slic3r/GUI/Jobs/SeqArrangeJob.cpp:55
msgid ""
"The result of the single-bed arrange would scatter instances of a single "
"object between several beds, possibly affecting order of printing of the non-"
"selected beds. Consider using global arrange across all beds."
msgstr ""

#: src/slic3r/GUI/Jobs/SeqArrangeJob.cpp:62
msgid "One of the objects is too large to fit the bed."
msgstr ""

#: src/slic3r/GUI/Jobs/SeqArrangeJob.cpp:75
msgid "Arrange for sequential print"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:357
msgid "Add Emboss text object"
msgstr ""

#. TRN: This is the title of the action appearing in undo/redo stack.
#. It is same for Text and SVG.
#: src/slic3r/GUI/Jobs/EmbossJob.cpp:1035
msgid "Emboss attribute change"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:1093
msgid "Add Emboss text Volume"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:1299
#: src/slic3r/GUI/Jobs/EmbossJob.cpp:1363
msgid "Font doesn't have any shape for given text."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:1349
#: src/slic3r/GUI/Jobs/EmbossJob.cpp:1368
msgid "There is no valid surface for text projection."
msgstr ""

#: src/slic3r/GUI/Jobs/PlaterWorker.hpp:89
msgid "An unexpected error occured"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:26
msgid "Best surface quality"
msgstr "最佳表面品質"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:28
msgid "Optimize object rotation for best surface quality."
msgstr "最佳化模型旋轉以獲得最佳表面質量。"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:29
msgid "Reduced overhang slopes"
msgstr "減少懸空斜坡"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:31
msgid ""
"Optimize object rotation to have minimum amount of overhangs needing support "
"structures.\n"
"Note that this method will try to find the best surface of the object for "
"touching the print bed if no elevation is set."
msgstr ""
"最佳化模型旋轉，使需要支撐結構的懸空量最少。\n"
"請注意，如果未設定標高，此方法將嘗試找到接觸打印載台的模型之最佳表面。"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:35
msgid "Lowest Z height"
msgstr "最低 Z 高度"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:37
msgid "Rotate the model to have the lowest z height for faster print time."
msgstr "旋轉模型以獲得最低的 z 高度以加快打印時間。"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:57
msgid "Searching for optimal orientation"
msgstr "查詢最佳方向"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:87
msgid "Orientation search canceled."
msgstr "定向搜尋已取消."

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:88
msgid "Orientation found."
msgstr "找到方向。"

#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:96
msgid "Choose SLA archive"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:100
msgid "Import file"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:107
msgid "Import model and profile"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:108
msgid "Import profile only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:109
msgid "Import model only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:53
msgid "Importing SLA archive"
msgstr "匯入 SLA 存檔"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:81
msgid ""
"The SLA archive doesn't contain any presets. Please activate some SLA "
"printer preset first before importing that SLA archive."
msgstr ""
"SLA 存檔不包含任何預設。在匯入該 SLA 存檔之前，請先啟動一些 SLA 打印機預設"
"值。"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:85
msgid "Import is unavailable for this archive format."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:90
msgid "Importing canceled."
msgstr "取消匯入。"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:91
msgid "Importing done."
msgstr "匯入完成。"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:112
msgid "The file does not exist."
msgstr "該檔案不存在。"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:139
msgid ""
"The imported SLA archive did not contain any presets. The current SLA "
"presets were used as fallback."
msgstr "匯入的 SLA 存檔不包含任何預設。以當前的 SLA 預設作為後備使用。"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:152
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr "您不能在載台上匯入包含多個零件模型的 SLA 項目"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:154 src/slic3r/GUI/MainFrame.cpp:1974
#: src/slic3r/GUI/Plater.cpp:1440
msgid "Attention!"
msgstr "注意！"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:170
msgid ""
"The profile in the imported archive is corrupted and will not be loaded."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:182
msgid ""
"No object could be retrieved from the archive. The slices might be corrupted "
"or missing."
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:22 src/slic3r/GUI/MainFrame.cpp:1398
msgid "Keyboard Shortcuts"
msgstr "鍵盤快速鍵"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:91
msgid "New project, clear plater"
msgstr "新項目,清除載台"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
msgid "Open project AMF/3MF with config, clear plater"
msgstr "使用設定打開 AMF/3MF 項目，清除載台"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
msgid "Save project (3mf)"
msgstr "儲存項目 (3mf)"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
msgid "Save project as (3mf)"
msgstr "將項目另存為 (3mf)"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:95
msgid "(Re)slice"
msgstr "（重新）切片"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:97
msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
msgstr "無需設定匯入STL/3MF/STEP/OBJ/AMF，保留載台"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
msgid "Import Config from ini/amf/3mf/gcode"
msgstr "從 ini/amf/3mf/gcode 匯入設定"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:99
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr "從 ini/amf/3mf/gcode 匯入設定並合併"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102 src/slic3r/GUI/Plater.cpp:7290
msgid "Send G-code"
msgstr "發送 G-code"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
msgid "Export config"
msgstr "匯出設定"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:104 src/slic3r/GUI/Sidebar.cpp:482
msgid "Export to SD card / Flash drive"
msgstr "匯出到 SD 卡 / USB隨身碟"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
msgid "Eject SD card / Flash drive"
msgstr "退出 SD 卡 / USB隨身碟"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "Select all objects"
msgstr "選擇所有模型"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Deselect all"
msgstr "取消全選"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Delete selected"
msgstr "刪除所選"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
msgid "Paste from clipboard"
msgstr "從剪貼簿貼上"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
msgid "Reload plater from disk"
msgstr "從磁碟重新匯入載台"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120 src/slic3r/GUI/Search.cpp:566
msgid "Search"
msgstr "搜尋"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Select Plater Tab"
msgstr "選擇載台設定分頁"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
msgid "Select Print Settings Tab"
msgstr "選擇打印設定選項卡"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
msgid "Select Filament Settings Tab"
msgstr "選擇線材設定選項卡"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
msgid "Select Printer Settings Tab"
msgstr "選擇打印機設定選項卡"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Switch to 3D"
msgstr "切換到 3D"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Switch to Preview"
msgstr "切換到預覽"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
#: src/slic3r/GUI/PrintHostDialogs.cpp:271
msgid "Print host upload queue"
msgstr "打印主機上傳序列"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129 src/slic3r/GUI/MainFrame.cpp:94
msgid "Open new instance"
msgstr "打開新實例"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
msgid "Camera view"
msgstr "相機視圖"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
msgid "Show/Hide object/instance labels"
msgstr "顯示/隱藏模型/實例標籤"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
#: src/slic3r/GUI/KBShortcutsDialog.cpp:137 src/slic3r/GUI/Preferences.cpp:69
#: src/slic3r/GUI/Preferences.cpp:221 src/slic3r/GUI/Preferences.cpp:244
#: src/slic3r/GUI/Preferences.cpp:253
msgid "Preferences"
msgstr "偏好設定"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Show keyboard shortcuts list"
msgstr "顯示鍵盤快捷鍵列表"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
msgid "Commands"
msgstr "命令"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Add Instance of the selected object"
msgstr "添加所選模型的實例"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Remove Instance of the selected object"
msgstr "移除所選模型的實例"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""
"按下以選擇多個模型\n"
"或用滑鼠移動多個模型"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Press to activate selection rectangle"
msgstr "按下以啟動矩形選擇"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Press to activate deselection rectangle"
msgstr "按下以取消矩形選擇"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid "Arrow Up"
msgstr "向上箭頭"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Move selection 10 mm in positive Y direction"
msgstr "在正 Y 方向移動選擇 10 mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
#: src/slic3r/GUI/KBShortcutsDialog.cpp:261
msgid "Arrow Down"
msgstr "箭頭向下"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Move selection 10 mm in negative Y direction"
msgstr "將選區沿負 Y 方向移動 10 mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
#: src/slic3r/GUI/KBShortcutsDialog.cpp:258
msgid "Arrow Left"
msgstr "箭頭向左"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Move selection 10 mm in negative X direction"
msgstr "將選區沿負 X 方向移動 10 mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
#: src/slic3r/GUI/KBShortcutsDialog.cpp:259
msgid "Arrow Right"
msgstr "箭頭向右"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Move selection 10 mm in positive X direction"
msgstr "將選區沿正 X 方向移動 10 mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Any arrow"
msgstr "任何箭頭"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Movement step set to 1 mm"
msgstr "移動步長設定為 1 mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Movement in camera space"
msgstr "相機空間中的運動"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Page Up"
msgstr "Page Up"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Rotate selection 45 degrees CCW"
msgstr "逆時針旋轉選擇 45 度"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Page Down"
msgstr "Page Down"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Rotate selection 45 degrees CW"
msgstr "順時針旋轉選擇 45 度"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Gizmo move"
msgstr "Gizmo 移動"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Gizmo scale"
msgstr "Gizmo 比例"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Gizmo rotate"
msgstr "Gizmo-旋轉"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Gizmo cut"
msgstr "Gizmo 裁切"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
msgid "Gizmo Place face on bed"
msgstr "Gizmo 平貼在載台上"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Gizmo SLA hollow"
msgstr "SLA Gizmo 空心"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Gizmo FDM paint-on fuzzy skin"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
msgid "Gizmo SLA support points"
msgstr "Gizmo SLA 支撐點"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Gizmo FDM paint-on supports"
msgstr "Gizmo FDM 繪製支撐"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Gizmo FDM paint-on seam"
msgstr "Gizmo FDM 繪製接縫"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Gizmo Multi Material painting"
msgstr "Gizmo 多材質繪製"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Gizmo Text emboss / engrave"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Unselect gizmo or clear selection"
msgstr "取消選擇 Gizmo 或清除選擇"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Change camera type (perspective, orthographic)"
msgstr "變更相機類型（透視、正交）"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
msgid "Zoom to Bed"
msgstr "縮放至載台"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""
"縮放到所選模型\n"
"或場景中的所有模型（如果未選擇）"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
msgid "Zoom in"
msgstr "放大"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
msgid "Zoom out"
msgstr "縮小"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
msgid "Switch between Editor/Preview"
msgstr "在編輯器/預覽之間切換"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
msgid "Collapse/Expand the sidebar"
msgstr "折疊/展開側邊欄"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr "顯示/隱藏 3Dconnexion 設備設定對話框（如果有啟用）"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
#: src/slic3r/GUI/KBShortcutsDialog.cpp:188
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr "顯示/隱藏 3Dconnexion 設備設定對話框"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
msgid "Minimize application"
msgstr "最小化應用程式"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193 src/slic3r/GUI/MainFrame.cpp:485
msgid "Plater"
msgstr "載台"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr "全部 Gizmos：旋轉 - 左滑鼠按鈕;平移 - 右滑鼠按鈕"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Gizmo move: Press to snap by 1mm"
msgstr "Gizmo 移動： 按 1 mm捕捉"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Gizmo scale: Press to snap by 5%"
msgstr "Gizmo 縮放：按 5% 捕捉"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr "Gizmo 縮放：比例選擇以符合打印體積"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr "Gizmo 縮放：按下以激活一個方向縮放"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr "Gizmo 縮放：按下以圍繞其自身中心縮放選定的模型"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr "Gizmo 旋轉：按下以圍繞其自身中心旋轉所選的模型"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
msgid "Gizmos"
msgstr "Gizmos"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr "當指定的Gizmo處於啟用狀態時，以下快捷方式適用"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
msgid "Set selected items as Printable/Unprintable"
msgstr "將所選項目設定為可打印/不可打印"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
msgid "Set default extruder for the selected items"
msgstr "為所選項目設定預設擠出機"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:210
msgid "Set extruder number for the selected items"
msgstr "為所選項目設定擠出機編號"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
msgid "Objects List"
msgstr "模型列表"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:217 src/slic3r/GUI/MainFrame.cpp:1818
msgid "Open a G-code file"
msgstr "打開 G-code 檔案"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:219 src/slic3r/GUI/MainFrame.cpp:1016
#: src/slic3r/GUI/MainFrame.cpp:1640 src/slic3r/GUI/MainFrame.cpp:1647
#: src/slic3r/GUI/MainFrame.cpp:1823 src/slic3r/GUI/MainFrame.cpp:1827
msgid "Reload the plater from disk"
msgstr "從磁碟機重新匯入載台"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
msgid "Vertical slider - Move active thumb Up"
msgstr "垂直滑塊 - 向上移動滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
msgid "Vertical slider - Move active thumb Down"
msgstr "垂直滑塊 - 向下移動滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
msgid "Horizontal slider - Move active thumb Left"
msgstr "水平滑塊 - 向左移動滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
msgid "Horizontal slider - Move active thumb Right"
msgstr "水平滑塊 - 向右移動滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
msgid "On/Off one layer mode of the vertical slider"
msgstr "打開/關閉垂直滑塊的一層模式"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:238
msgid "Show/Hide legend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
msgid "Show/Hide G-code window"
msgstr "顯示/隱藏 G-code 視窗"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:242 src/slic3r/GUI/Plater.cpp:3769
#: src/slic3r/GUI/Tab.cpp:3278
msgid "Preview"
msgstr "預覽"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
msgid "Move active thumb Up"
msgstr "向上移動滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Move active thumb Down"
msgstr "向下移動滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Set upper thumb as active"
msgstr "將上滑塊設定為啟用"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
msgid "Set lower thumb as active"
msgstr "將下滑塊設定為啟用"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Add color change marker for current layer"
msgstr "為當前層添加顏色變化標記"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
msgid "Delete color change marker for current layer"
msgstr "刪除當前圖層的顏色變更標記"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:251
#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
#: src/slic3r/GUI/KBShortcutsDialog.cpp:262
#: src/slic3r/GUI/KBShortcutsDialog.cpp:263
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""
"移動滑塊時按加速 5 次\n"
"帶箭頭鍵或滑鼠輪"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Vertical Slider"
msgstr "垂直滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr "當垂直滑塊處於啟用狀態時，以下快捷方式適用於 G-code預覽"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:258
msgid "Move active thumb Left"
msgstr "向左移動滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:259
msgid "Move active thumb Right"
msgstr "向右移動滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid "Set left thumb as active"
msgstr "將左滑塊設定為啟用"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:261
msgid "Set right thumb as active"
msgstr "將右滑塊設定為啟用"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:266
msgid "Horizontal Slider"
msgstr "水平滑塊"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:266
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr "當水平滑塊處於啟用狀態時，以下快捷方式適用於G-code預覽"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:290
msgid "Keyboard shortcuts"
msgstr "快捷鍵"

#: src/slic3r/GUI/BulkExportDialog.cpp:120
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:841
#: src/slic3r/GUI/SavePresetDialog.cpp:241
msgid "The following characters are not allowed in the name"
msgstr ""

#: src/slic3r/GUI/BulkExportDialog.cpp:128
#: src/slic3r/GUI/SavePresetDialog.cpp:293
msgid "The name cannot be empty."
msgstr "名稱不能是空的。"

#: src/slic3r/GUI/BulkExportDialog.cpp:135
#: src/slic3r/GUI/SavePresetDialog.cpp:304
msgid "The name is too long."
msgstr ""

#: src/slic3r/GUI/BulkExportDialog.cpp:142
#: src/slic3r/GUI/SavePresetDialog.cpp:309
msgid "The name cannot start with space character."
msgstr "名稱不能以空格字元開頭。"

#: src/slic3r/GUI/BulkExportDialog.cpp:149
#: src/slic3r/GUI/SavePresetDialog.cpp:314
msgid "The name cannot end with space character."
msgstr "名稱不能以空格字元結尾。"

#: src/slic3r/GUI/BulkExportDialog.cpp:156
msgid "This name is already used, use another."
msgstr ""

#: src/slic3r/GUI/BulkExportDialog.cpp:163
msgid "The file already exists!"
msgstr ""

#: src/slic3r/GUI/BulkExportDialog.cpp:258
msgid "Some of the selected files already exist. Do you want to replace them?"
msgstr ""

#: src/slic3r/GUI/LoadStepDialog.cpp:44
#, boost-format
msgid "STEP import quality (%1%)"
msgstr ""

#: src/slic3r/GUI/LoadStepDialog.cpp:72
msgid "Apply to all"
msgstr ""

#: src/slic3r/GUI/LoadStepDialog.cpp:96
msgid "Select requested quality of the mesh after import: "
msgstr ""

#: src/slic3r/GUI/LoadStepDialog.cpp:149
msgid "Lower quality"
msgstr ""

#: src/slic3r/GUI/LoadStepDialog.cpp:150 src/slic3r/GUI/LoadStepDialog.cpp:203
msgid "Linear precision"
msgstr ""

#: src/slic3r/GUI/LoadStepDialog.cpp:150 src/slic3r/GUI/LoadStepDialog.cpp:228
msgid "Angle precision"
msgstr ""

#: src/slic3r/GUI/LoadStepDialog.cpp:151
msgid "Higher quality"
msgstr ""

#. TRN %n% contain min, max and step values respectively
#: src/slic3r/GUI/LoadStepDialog.cpp:179
#, boost-format
msgid "Set value from the range [%1%; %2%] with %3% step"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:94 src/slic3r/GUI/MainFrame.cpp:108
#: src/slic3r/GUI/MainFrame.cpp:1705
msgid "Open a new PrusaSlicer instance"
msgstr "打開一個新的PrusaSlicer實例"

#: src/slic3r/GUI/MainFrame.cpp:97 src/slic3r/GUI/MainFrame.cpp:110
msgid "G-code preview"
msgstr "G-code預覽"

#: src/slic3r/GUI/MainFrame.cpp:97 src/slic3r/GUI/MainFrame.cpp:1585
msgid "Open G-code viewer"
msgstr "打開 G-code查看器"

#: src/slic3r/GUI/MainFrame.cpp:108 src/slic3r/GUI/MainFrame.cpp:1841
msgid "Open PrusaSlicer"
msgstr "打開PrusaSlicer"

#: src/slic3r/GUI/MainFrame.cpp:110
msgid "Open new G-code viewer"
msgstr "打開新的 G-code查看器"

#: src/slic3r/GUI/MainFrame.cpp:252
msgid "Closing PrusaSlicer. Current project is modified."
msgstr "關閉 PrusaSlicer。當前項目已修改。"

#: src/slic3r/GUI/MainFrame.cpp:259
msgid "PrusaSlicer is closing"
msgstr "PrusaSlicer 正在關閉"

#: src/slic3r/GUI/MainFrame.cpp:259
msgid "Closing PrusaSlicer while some presets are modified."
msgstr "在修改某些預設時關閉 PrusaSlicer。"

#: src/slic3r/GUI/MainFrame.cpp:574 src/slic3r/GUI/Plater.cpp:348
#: src/slic3r/GUI/Plater.cpp:1821
msgid "Untitled"
msgstr "無標題"

#: src/slic3r/GUI/MainFrame.cpp:599
msgid "based on Slic3r"
msgstr "基於 Slic3r"

#: src/slic3r/GUI/MainFrame.cpp:639
msgid "Show Log in button in application top bar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1012 src/slic3r/GUI/MainFrame.cpp:1642
msgid "Re&load Web Content"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1013 src/slic3r/GUI/MainFrame.cpp:1643
msgid "Reload Web Content"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1015 src/slic3r/GUI/MainFrame.cpp:1639
#: src/slic3r/GUI/MainFrame.cpp:1646 src/slic3r/GUI/MainFrame.cpp:1822
#: src/slic3r/GUI/MainFrame.cpp:1826
msgid "Re&load from Disk"
msgstr "從磁碟機中重新匯入(&l)"

#: src/slic3r/GUI/MainFrame.cpp:1333 src/slic3r/GUI/MainFrame.cpp:1336
#, c-format, boost-format
msgid "&About %s"
msgstr "關於(&A) %s"

#: src/slic3r/GUI/MainFrame.cpp:1333 src/slic3r/GUI/MainFrame.cpp:1336
msgid "Show about dialog"
msgstr "顯示對話框"

#: src/slic3r/GUI/MainFrame.cpp:1358
#, c-format, boost-format
msgid "%s &Website"
msgstr "%s 網站(&W)"

#: src/slic3r/GUI/MainFrame.cpp:1359 src/slic3r/GUI/MainFrame.cpp:1363
#: src/slic3r/GUI/MainFrame.cpp:1367
#, c-format, boost-format
msgid "Open the %s website in your browser"
msgstr "在瀏覽器中打開 %s 網站"

#. TRN Item from "Help" menu
#: src/slic3r/GUI/MainFrame.cpp:1362
msgid "&Quick Start"
msgstr ""

#. TRN Item from "Help" menu
#: src/slic3r/GUI/MainFrame.cpp:1366
msgid "Sample &G-codes and Models"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1370
msgid "Prusa 3D &Drivers"
msgstr "Prusa 3D 驅動程式(&D)"

#: src/slic3r/GUI/MainFrame.cpp:1370
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "在瀏覽器中打開 Prusa3D 驅動程式下載頁面"

#: src/slic3r/GUI/MainFrame.cpp:1372
msgid "Software &Releases"
msgstr "軟體與發佈"

#: src/slic3r/GUI/MainFrame.cpp:1372
msgid "Open the software releases page in your browser"
msgstr "在瀏覽器中打開軟體發佈頁面"

#: src/slic3r/GUI/MainFrame.cpp:1382
msgid "System &Info"
msgstr "系統資訊(&I)"

#: src/slic3r/GUI/MainFrame.cpp:1382
msgid "Show system information"
msgstr "顯示系統資訊"

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "Show &Configuration Folder"
msgstr "顯示和設定資料夾(&C)"

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "Show user configuration folder (datadir)"
msgstr "顯示使用者設定資料夾（datadir）"

#: src/slic3r/GUI/MainFrame.cpp:1386
msgid "Report an I&ssue"
msgstr "問題報告(&I)"

#: src/slic3r/GUI/MainFrame.cpp:1386
#, c-format, boost-format
msgid "Report an issue on %s"
msgstr "在 %s 回報問題"

#: src/slic3r/GUI/MainFrame.cpp:1391
msgid "Show Tip of the Day"
msgstr "顯示每日提示"

#: src/slic3r/GUI/MainFrame.cpp:1395
msgid ""
"Opens Tip of the day notification in bottom right corner or shows another "
"tip if already opened."
msgstr "打開右下角的每日提示通知或顯示另一個提示（如果已打開的話）。"

#: src/slic3r/GUI/MainFrame.cpp:1398
msgid "Show the list of the keyboard shortcuts"
msgstr "顯示鍵盤快捷鍵列表"

#: src/slic3r/GUI/MainFrame.cpp:1412
msgid "Iso"
msgstr "ISO"

#: src/slic3r/GUI/MainFrame.cpp:1412
msgid "Iso View"
msgstr "檢視 ISO"

#. TRN Main menu: View->Top
#: src/slic3r/GUI/MainFrame.cpp:1416
msgid "Top"
msgstr "頂部"

#: src/slic3r/GUI/MainFrame.cpp:1416
msgid "Top View"
msgstr "頂視圖"

#. TRN Main menu: View->Bottom
#: src/slic3r/GUI/MainFrame.cpp:1419
msgid "Bottom"
msgstr "底部"

#: src/slic3r/GUI/MainFrame.cpp:1419
msgid "Bottom View"
msgstr "底視圖"

#: src/slic3r/GUI/MainFrame.cpp:1421
msgid "Front"
msgstr "正面"

#: src/slic3r/GUI/MainFrame.cpp:1421
msgid "Front View"
msgstr "正視圖"

#: src/slic3r/GUI/MainFrame.cpp:1423
msgid "Rear View"
msgstr "後視圖"

#: src/slic3r/GUI/MainFrame.cpp:1425
msgid "Left"
msgstr "左"

#: src/slic3r/GUI/MainFrame.cpp:1425
msgid "Left View"
msgstr "左視圖"

#: src/slic3r/GUI/MainFrame.cpp:1427
msgid "Right"
msgstr "右"

#: src/slic3r/GUI/MainFrame.cpp:1427
msgid "Right View"
msgstr "右視圖"

#: src/slic3r/GUI/MainFrame.cpp:1440
msgid "&New Project"
msgstr "新項目(&N)"

#: src/slic3r/GUI/MainFrame.cpp:1440
msgid "Start a new project"
msgstr "開新的項目"

#: src/slic3r/GUI/MainFrame.cpp:1443
msgid "&Open Project"
msgstr "開啟項目(&O)"

#: src/slic3r/GUI/MainFrame.cpp:1443
msgid "Open a project file"
msgstr "打開項目"

#: src/slic3r/GUI/MainFrame.cpp:1448
msgid "Recent projects"
msgstr "最近的項目"

#: src/slic3r/GUI/MainFrame.cpp:1460
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""
"所選項目不再可用。\n"
"您要將其從最近的項目列表中刪除嗎？"

#: src/slic3r/GUI/MainFrame.cpp:1484
msgid "&Save Project"
msgstr "儲存項目(&S)"

#: src/slic3r/GUI/MainFrame.cpp:1484
msgid "Save current project file"
msgstr "儲存當前項目"

#: src/slic3r/GUI/MainFrame.cpp:1488 src/slic3r/GUI/MainFrame.cpp:1490
msgid "Save Project &as"
msgstr "另存項目(&A)"

#: src/slic3r/GUI/MainFrame.cpp:1488 src/slic3r/GUI/MainFrame.cpp:1490
msgid "Save current project file as"
msgstr "將當前項目另存為"

#: src/slic3r/GUI/MainFrame.cpp:1498
msgid "Import STL/3MF/STEP/OBJ/AM&F"
msgstr "匯入STL/3MF/STEP/OBJ/AM&F"

#: src/slic3r/GUI/MainFrame.cpp:1498
msgid "Load a model"
msgstr "匯入模型"

#: src/slic3r/GUI/MainFrame.cpp:1502
msgid "Import STL (Imperial Units)"
msgstr "匯入 STL（英制單位）"

#: src/slic3r/GUI/MainFrame.cpp:1502
msgid "Load an model saved with imperial units"
msgstr "匯入儲存英制單位的模型"

#: src/slic3r/GUI/MainFrame.cpp:1506
msgid "Import SLA Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1506
msgid "Load an SLA archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1510
msgid "Import ZIP Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1510
msgid "Load a ZIP archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1515
msgid "Import &Config"
msgstr "匯入設定(&C)"

#: src/slic3r/GUI/MainFrame.cpp:1515
msgid "Load exported configuration file"
msgstr "匯入先前匯出的設定檔"

#: src/slic3r/GUI/MainFrame.cpp:1518
msgid "Import Config from &Project"
msgstr "從項目匯入設定(&P)"

#: src/slic3r/GUI/MainFrame.cpp:1518
msgid "Load configuration from project file"
msgstr "從項目匯入設定"

#: src/slic3r/GUI/MainFrame.cpp:1522
msgid "Import Config &Bundle"
msgstr "匯入設定和設定包(&B)"

#: src/slic3r/GUI/MainFrame.cpp:1522
msgid "Load presets from a bundle"
msgstr "從設定包中匯入預設"

#: src/slic3r/GUI/MainFrame.cpp:1525
msgid "&Import"
msgstr "匯入(&I)"

#: src/slic3r/GUI/MainFrame.cpp:1528 src/slic3r/GUI/MainFrame.cpp:1883
msgid "Export &G-code"
msgstr "匯出G-code(&G)"

#: src/slic3r/GUI/MainFrame.cpp:1528
msgid "Export current plate as G-code"
msgstr "將當前載台內容匯出為 G-code"

#: src/slic3r/GUI/MainFrame.cpp:1532 src/slic3r/GUI/MainFrame.cpp:1884
msgid "S&end G-code"
msgstr "傳送 G-code(&S)"

#: src/slic3r/GUI/MainFrame.cpp:1532
msgid "Send to print current plate as G-code"
msgstr "以 G-code 形式傳送打印到當前載台"

#: src/slic3r/GUI/MainFrame.cpp:1536
msgid "Export G-code to SD Card / Flash Drive"
msgstr "將 G-code 匯出到 SD 卡/USB隨身碟"

#: src/slic3r/GUI/MainFrame.cpp:1536
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr "將 G-code 當前載台上的內容匯出到 SD 卡/USB隨身碟"

#: src/slic3r/GUI/MainFrame.cpp:1540
msgid "Export Plate as &STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1540
msgid "Export current plate as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1543
msgid "Export Plate as STL/OBJ &Including Supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1543
msgid "Export current plate as STL/OBJ including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1547 src/slic3r/GUI/MainFrame.cpp:1838
msgid "Export &Toolpaths as OBJ"
msgstr "將模型匯出爲 OBJ(&T)"

#: src/slic3r/GUI/MainFrame.cpp:1547 src/slic3r/GUI/MainFrame.cpp:1838
msgid "Export toolpaths as OBJ"
msgstr "將模型匯出爲 OBJ"

#: src/slic3r/GUI/MainFrame.cpp:1551
msgid "Export &Config"
msgstr "匯出設定(&C)"

#: src/slic3r/GUI/MainFrame.cpp:1551
msgid "Export current configuration to file"
msgstr "將當前設定匯出到檔案"

#: src/slic3r/GUI/MainFrame.cpp:1554
msgid "Export Config &Bundle"
msgstr "匯出設定包(&B)"

#: src/slic3r/GUI/MainFrame.cpp:1554
msgid "Export all presets to file"
msgstr "將所有預設匯出到檔案"

#: src/slic3r/GUI/MainFrame.cpp:1557
msgid "Export Config Bundle With Physical Printers"
msgstr "匯出打印機設定包"

#: src/slic3r/GUI/MainFrame.cpp:1557
msgid "Export all presets including physical printers to file"
msgstr "匯出所有預設，包括要歸檔的打表機"

#: src/slic3r/GUI/MainFrame.cpp:1560
msgid "&Export"
msgstr "匯出(&E)"

#: src/slic3r/GUI/MainFrame.cpp:1563 src/slic3r/GUI/MainFrame.cpp:1831
msgid "Convert ASCII G-code to &binary"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1563 src/slic3r/GUI/MainFrame.cpp:1831
msgid "Convert a G-code file from ASCII to binary format"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1566 src/slic3r/GUI/MainFrame.cpp:1834
msgid "Convert binary G-code to &ASCII"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1566 src/slic3r/GUI/MainFrame.cpp:1834
msgid "Convert a G-code file from binary to ASCII format"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1569
msgid "&Convert"
msgstr "轉換(&C)"

#: src/slic3r/GUI/MainFrame.cpp:1571
msgid "Ejec&t SD Card / Flash Drive"
msgstr "退出 SD 卡 / USB隨身碟(&t)"

#: src/slic3r/GUI/MainFrame.cpp:1571
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr "匯出 G-code 後退出 SD 卡/USB隨身碟。"

#: src/slic3r/GUI/MainFrame.cpp:1577
msgid "(Re)Slice No&w"
msgstr "重新切片(&w)"

#: src/slic3r/GUI/MainFrame.cpp:1577
msgid "Start new slicing process"
msgstr "開始新的切片步驟"

#: src/slic3r/GUI/MainFrame.cpp:1581
msgid "&Repair STL file"
msgstr "修復STL檔案(&R)"

#: src/slic3r/GUI/MainFrame.cpp:1581
msgid "Automatically repair an STL file"
msgstr "自動修復 STL 檔案"

#: src/slic3r/GUI/MainFrame.cpp:1585
msgid "&G-code Preview"
msgstr "G-code預覽(&G)"

#: src/slic3r/GUI/MainFrame.cpp:1589
msgid "E&xit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1589 src/slic3r/GUI/UpdateDialogs.cpp:408
#: src/slic3r/GUI/UpdateDialogs.cpp:455
#, c-format, boost-format
msgid "Exit %s"
msgstr "退出%s"

#: src/slic3r/GUI/MainFrame.cpp:1591 src/slic3r/GUI/MainFrame.cpp:1845
msgid "&Quit"
msgstr "離開(&Q)"

#: src/slic3r/GUI/MainFrame.cpp:1591 src/slic3r/GUI/MainFrame.cpp:1845
#, c-format, boost-format
msgid "Quit %s"
msgstr "結束 %s"

#: src/slic3r/GUI/MainFrame.cpp:1607
msgid "&Select All"
msgstr "全選(&S)"

#: src/slic3r/GUI/MainFrame.cpp:1608
msgid "Selects all objects"
msgstr "選取全部模型"

#: src/slic3r/GUI/MainFrame.cpp:1610
msgid "D&eselect All"
msgstr "取消全選(&e)"

#: src/slic3r/GUI/MainFrame.cpp:1611
msgid "Deselects all objects"
msgstr "取消選取全部模型"

#: src/slic3r/GUI/MainFrame.cpp:1614
msgid "&Delete Selected"
msgstr "刪除所選項目(&D)"

#: src/slic3r/GUI/MainFrame.cpp:1615
msgid "Deletes the current selection"
msgstr "刪除當前所選模型"

#: src/slic3r/GUI/MainFrame.cpp:1617
msgid "Delete &All"
msgstr "全部刪除(&A)"

#: src/slic3r/GUI/MainFrame.cpp:1618
msgid "Deletes all objects"
msgstr "選取全部模型"

#: src/slic3r/GUI/MainFrame.cpp:1622
msgid "&Undo"
msgstr "還原(&U)"

#: src/slic3r/GUI/MainFrame.cpp:1625
msgid "&Redo"
msgstr "重作(&R)"

#: src/slic3r/GUI/MainFrame.cpp:1630
msgid "&Copy"
msgstr "複製(&C)"

#: src/slic3r/GUI/MainFrame.cpp:1631
msgid "Copy selection to clipboard"
msgstr "複製到剪貼簿"

#: src/slic3r/GUI/MainFrame.cpp:1633
msgid "&Paste"
msgstr "貼上(&P)"

#: src/slic3r/GUI/MainFrame.cpp:1634
msgid "Paste clipboard"
msgstr "從剪貼簿貼上"

#: src/slic3r/GUI/MainFrame.cpp:1652
msgid "Searc&h"
msgstr "搜尋(&h)"

#: src/slic3r/GUI/MainFrame.cpp:1653
msgid "Search in settings"
msgstr "搜尋設定"

#: src/slic3r/GUI/MainFrame.cpp:1663
msgid "&Plater Tab"
msgstr "載台(&P)"

#: src/slic3r/GUI/MainFrame.cpp:1663
msgid "Show the plater"
msgstr "顯示載台"

#: src/slic3r/GUI/MainFrame.cpp:1668
msgid "P&rint Settings Tab"
msgstr "打印設定(&P)"

#: src/slic3r/GUI/MainFrame.cpp:1668
msgid "Show the print settings"
msgstr "顯示打印設定"

#: src/slic3r/GUI/MainFrame.cpp:1671 src/slic3r/GUI/MainFrame.cpp:1886
msgid "&Filament Settings Tab"
msgstr "線材設定(&F)"

#: src/slic3r/GUI/MainFrame.cpp:1671
msgid "Show the filament settings"
msgstr "顯示線材設定"

#: src/slic3r/GUI/MainFrame.cpp:1675
msgid "Print&er Settings Tab"
msgstr "打印機設定(&e)"

#: src/slic3r/GUI/MainFrame.cpp:1675
msgid "Show the printer settings"
msgstr "顯示打印機設定"

#: src/slic3r/GUI/MainFrame.cpp:1681
msgid "3&D"
msgstr "3D(&D)"

#: src/slic3r/GUI/MainFrame.cpp:1681
msgid "Show the 3D editing view"
msgstr "以 3D 編輯檢視"

#: src/slic3r/GUI/MainFrame.cpp:1684
msgid "Pre&view"
msgstr "預覽 (&v)"

#: src/slic3r/GUI/MainFrame.cpp:1684
msgid "Show the 3D slices preview"
msgstr "顯示 3D 切片預覽"

#: src/slic3r/GUI/MainFrame.cpp:1690
msgid "Open the dialog to modify shape gallery"
msgstr "打開對話框修改形狀圖庫"

#: src/slic3r/GUI/MainFrame.cpp:1701
msgid "Print &Host Upload Queue"
msgstr "打印主機上傳序列(&H)"

#: src/slic3r/GUI/MainFrame.cpp:1701
msgid "Display the Print Host Upload Queue window"
msgstr "顯示打印主機上傳隊列窗口"

#: src/slic3r/GUI/MainFrame.cpp:1705
msgid "Open New Instance"
msgstr "打開新實例"

#: src/slic3r/GUI/MainFrame.cpp:1709
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1787
msgid "Compare Presets"
msgstr "比對預設值"

#: src/slic3r/GUI/MainFrame.cpp:1709
msgid "Compare presets"
msgstr "比對預設值"

#: src/slic3r/GUI/MainFrame.cpp:1719
msgid "Show &Labels"
msgstr "顯示標籤(&L)"

#: src/slic3r/GUI/MainFrame.cpp:1719
msgid "Show object/instance labels in 3D scene"
msgstr "在 3D 場景中顯示模型/實例標籤"

#: src/slic3r/GUI/MainFrame.cpp:1722 src/slic3r/GUI/MainFrame.cpp:1855
msgid "Show Legen&d"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1722
msgid "Show legend in preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1725
msgid "&Collapse Sidebar"
msgstr "折疊側邊欄(&C)"

#: src/slic3r/GUI/MainFrame.cpp:1725 src/slic3r/GUI/Plater.cpp:1196
msgid "Collapse sidebar"
msgstr "折疊側邊欄"

#: src/slic3r/GUI/MainFrame.cpp:1730
msgid "&Fullscreen"
msgstr "全螢幕(&F)"

#: src/slic3r/GUI/MainFrame.cpp:1730
msgid "Fullscreen"
msgstr "全螢幕"

#: src/slic3r/GUI/MainFrame.cpp:1744 src/slic3r/GUI/MainFrame.cpp:1767
#: src/slic3r/GUI/MainFrame.cpp:1864
msgid "&File"
msgstr "檔案(&F)"

#: src/slic3r/GUI/MainFrame.cpp:1746 src/slic3r/GUI/MainFrame.cpp:1768
msgid "&Edit"
msgstr "編輯(&E)"

#: src/slic3r/GUI/MainFrame.cpp:1750 src/slic3r/GUI/MainFrame.cpp:1769
msgid "&Window"
msgstr "視窗(&W)"

#: src/slic3r/GUI/MainFrame.cpp:1752 src/slic3r/GUI/MainFrame.cpp:1770
#: src/slic3r/GUI/MainFrame.cpp:1865
msgid "&View"
msgstr "檢視(&V)"

#: src/slic3r/GUI/MainFrame.cpp:1754 src/slic3r/GUI/MainFrame.cpp:1772
#: src/slic3r/GUI/MainFrame.cpp:1867
msgid "&Configuration"
msgstr "設定(&C)"

#: src/slic3r/GUI/MainFrame.cpp:1758 src/slic3r/GUI/MainFrame.cpp:1773
#: src/slic3r/GUI/MainFrame.cpp:1868
msgid "&Help"
msgstr "說明(&H)"

#: src/slic3r/GUI/MainFrame.cpp:1818
msgid "&Open G-code"
msgstr "打開G-code碼(&O)"

#: src/slic3r/GUI/MainFrame.cpp:1841
msgid "Open &PrusaSlicer"
msgstr "打開PrusaSlicer(&P)"

#: src/slic3r/GUI/MainFrame.cpp:1855
msgid "Show legend"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1883
msgid "E&xport"
msgstr "匯出(&x)"

#: src/slic3r/GUI/MainFrame.cpp:1884
msgid "S&end to print"
msgstr "傳送到打印機(&E)"

#: src/slic3r/GUI/MainFrame.cpp:1886
msgid "Mate&rial Settings Tab"
msgstr "線材設定頁(&r)"

#: src/slic3r/GUI/MainFrame.cpp:1903
msgid "Select the STL file to repair:"
msgstr "選擇要修復的 STL 檔案："

#: src/slic3r/GUI/MainFrame.cpp:1913
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr "將 OBJ 檔案（比 STL 更不容易出現坐標錯誤）儲存為："

#: src/slic3r/GUI/MainFrame.cpp:1924
msgid "Your file was repaired."
msgstr "您的檔案已修復。"

#: src/slic3r/GUI/MainFrame.cpp:1924
msgid "Repair"
msgstr "修復"

#: src/slic3r/GUI/MainFrame.cpp:1938
msgid "Save configuration as:"
msgstr "將設定儲存為："

#: src/slic3r/GUI/MainFrame.cpp:1955
msgid "Loading of a configuration file"
msgstr "匯入設定檔"

#: src/slic3r/GUI/MainFrame.cpp:1957 src/slic3r/GUI/MainFrame.cpp:2083
msgid "Select configuration to load:"
msgstr "選擇要匯入的設定："

#: src/slic3r/GUI/MainFrame.cpp:1967
msgid ""
"The selected config file contains a post-processing script.\n"
"Please review the script carefully before exporting G-code."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:2002
msgid "Exporting configuration bundle"
msgstr "匯出設定包"

#: src/slic3r/GUI/MainFrame.cpp:2003
msgid ""
"Some presets are modified and the unsaved changes will not be exported into "
"configuration bundle."
msgstr "修改了一些預設，未儲存的變更不會匯出到設定包中。"

#: src/slic3r/GUI/MainFrame.cpp:2012
msgid "Save presets bundle as:"
msgstr "儲存預置包為:"

#: src/slic3r/GUI/MainFrame.cpp:2031
msgid ""
"Some of the exported printers contain passwords, which are stored in the "
"system password store. Do you want to include the passwords in the plain "
"text form in the exported file?"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:2043
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:220 src/slic3r/GUI/Plater.cpp:6518
#: src/slic3r/GUI/UserAccountCommunication.cpp:129
msgid "Failed to load credentials from the system password store."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:2054
#, boost-format
msgid ""
"Failed to load credentials from the system password store for printer %1%."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:2080
msgid "Loading of a configuration bundle"
msgstr "匯入設定包"

#: src/slic3r/GUI/MainFrame.cpp:2110
#, c-format, boost-format
msgid "%d presets successfully imported."
msgstr "%d 個預設已成功匯入。"

#: src/slic3r/GUI/MainFrame.cpp:2305 src/slic3r/GUI/MainFrame.cpp:2306
msgid "Material Settings"
msgstr "材質設定"

#: src/slic3r/GUI/MainFrame.cpp:2305 src/slic3r/GUI/MainFrame.cpp:2306
msgid "Filament Settings"
msgstr "線材設定"

#: src/slic3r/GUI/Mouse3DController.cpp:458
msgid "3Dconnexion settings"
msgstr "3Dconnexion 設定"

#: src/slic3r/GUI/Mouse3DController.cpp:469
msgid "Device:"
msgstr "裝置："

#: src/slic3r/GUI/Mouse3DController.cpp:474
msgid "Speed:"
msgstr "處理速度："

#: src/slic3r/GUI/Mouse3DController.cpp:477
#: src/slic3r/GUI/Mouse3DController.cpp:498
msgid "Translation"
msgstr "翻譯"

#: src/slic3r/GUI/Mouse3DController.cpp:489
#: src/slic3r/GUI/Mouse3DController.cpp:498
msgid "Zoom"
msgstr "縮放"

#: src/slic3r/GUI/Mouse3DController.cpp:495
msgid "Deadzone:"
msgstr "無作用區："

#: src/slic3r/GUI/Mouse3DController.cpp:510
msgid "Options:"
msgstr "選項："

#: src/slic3r/GUI/Mouse3DController.cpp:513
msgid "Swap Y/Z axes"
msgstr "交換 Y/Z 軸"

#: src/slic3r/GUI/MsgDialog.cpp:239 src/slic3r/GUI/MsgDialog.cpp:247
#, c-format, boost-format
msgid "%s error"
msgstr "%s 錯誤"

#: src/slic3r/GUI/MsgDialog.cpp:240 src/slic3r/GUI/MsgDialog.cpp:248
#, c-format, boost-format
msgid "%s has encountered an error"
msgstr "%s 遇到錯誤"

#: src/slic3r/GUI/MsgDialog.cpp:270
#, c-format, boost-format
msgid "%s warning"
msgstr "%s 警告"

#: src/slic3r/GUI/MsgDialog.cpp:271
#, c-format, boost-format
msgid "%s has a warning"
msgstr "%s 有警告"

#: src/slic3r/GUI/MsgDialog.cpp:284 src/slic3r/GUI/MsgDialog.cpp:302
#, c-format, boost-format
msgid "%s info"
msgstr "%s 資訊"

#: src/slic3r/GUI/MsgDialog.cpp:339
#, c-format, boost-format
msgid "%s information"
msgstr "%s 相關資訊"

#: src/slic3r/GUI/NotificationManager.hpp:930
msgid "3D Mouse disconnected."
msgstr "3D 滑鼠已斷開連接。"

#: src/slic3r/GUI/NotificationManager.hpp:931
msgid "Configuration update is available."
msgstr "有設定更新可用。"

#: src/slic3r/GUI/NotificationManager.hpp:931
#: src/slic3r/GUI/NotificationManager.hpp:938
msgid "See more."
msgstr "查看更多。"

#: src/slic3r/GUI/NotificationManager.hpp:938
msgid ""
"Configuration update is available. Update contains new printer releases."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:946
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""
"您剛剛添加了一個用於顏色變更的 G-code ，但它是空的值。\n"
"要正確匯出 G-code ，請在“打印機設定 > 自定義 G-code ”中選中“顏色變更 G-code ”"

#: src/slic3r/GUI/NotificationManager.hpp:949
msgid ""
"No color change event was added to the print. The print does not look like a "
"sign."
msgstr "沒有顏色變化事件被添加到打印件中。打印件看起來不像是一個標誌。"

#: src/slic3r/GUI/NotificationManager.hpp:951
msgid "Desktop integration was successful."
msgstr "桌面整合成功。"

#: src/slic3r/GUI/NotificationManager.hpp:953
msgid "Desktop integration failed."
msgstr "桌面整合失敗。"

#: src/slic3r/GUI/NotificationManager.hpp:955
msgid "Undo desktop integration was successful."
msgstr "取消桌面整合成功。"

#: src/slic3r/GUI/NotificationManager.hpp:957
msgid "Undo desktop integration failed."
msgstr "取消桌面整合失敗。"

#: src/slic3r/GUI/NotificationManager.hpp:958
msgid "Exporting."
msgstr "匯出。"

#. TRN: The text is followed by a hyperlink saying "here." It is necessary to split it in two phrases, sorry.
#: src/slic3r/GUI/NotificationManager.hpp:963
msgid ""
"PrusaSlicer received a download request from Printables.com, but it's not "
"allowed. You can allow it"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:964
msgid "here."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:785
msgid "Open Folder."
msgstr "打開資料夾。"

#: src/slic3r/GUI/NotificationManager.cpp:823
msgid "Eject drive"
msgstr "退出隨身碟"

#: src/slic3r/GUI/NotificationManager.cpp:881
msgid "Ejecting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1065
#: src/slic3r/GUI/NotificationManager.cpp:1322
#: src/slic3r/GUI/NotificationManager.cpp:1549
msgid "ERROR"
msgstr "錯誤"

#: src/slic3r/GUI/NotificationManager.cpp:1111
msgid "Open Printables project page"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1324
msgid "COMPLETED"
msgstr "已完成"

#: src/slic3r/GUI/NotificationManager.cpp:1416
#: src/slic3r/GUI/NotificationManager.cpp:1445
msgid "UPLOADED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1544
msgid "RESOLVING ADDRESS"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1554
msgid "CANCELED"
msgstr "取消"

#: src/slic3r/GUI/NotificationManager.cpp:1615
msgid "Cancel upload"
msgstr "取消上傳"

#: src/slic3r/GUI/NotificationManager.cpp:1724
#, c-format, boost-format
msgid "%1$d object was loaded with custom supports."
msgid_plural "%1$d objects were loaded with custom supports."
msgstr[0] "%1$d 模型匯入了自定義支撐。"

#: src/slic3r/GUI/NotificationManager.cpp:1725
#, c-format, boost-format
msgid "%1$d object was loaded with custom seam."
msgid_plural "%1$d objects were loaded with custom seam."
msgstr[0] "%1$d 模型匯入了自定義接縫。"

#: src/slic3r/GUI/NotificationManager.cpp:1726
#, c-format, boost-format
msgid "%1$d object was loaded with multimaterial painting."
msgid_plural "%1$d objects were loaded with multimaterial painting."
msgstr[0] "%1$d 模型匯入了多材料繪製。"

#: src/slic3r/GUI/NotificationManager.cpp:1727
#, c-format, boost-format
msgid "%1$d object was loaded with variable layer height."
msgid_plural "%1$d objects were loaded with variable layer height."
msgstr[0] "%1$d 模型以可變層高的方式匯入。"

#: src/slic3r/GUI/NotificationManager.cpp:1728
#, c-format, boost-format
msgid "%1$d object was loaded with partial sinking."
msgid_plural "%1$d objects were loaded with partial sinking."
msgstr[0] "%1$d 模型匯入時部分沉到載台以下。"

#: src/slic3r/GUI/NotificationManager.cpp:1729
#, c-format, boost-format
msgid "%1$d object was loaded as a part of cut object."
msgid_plural "%1$d objects were loaded as parts of cut object"
msgstr[0] ""

#: src/slic3r/GUI/NotificationManager.cpp:1730
#, c-format, boost-format
msgid "%1$d object was loaded with fuzzy skin painting."
msgid_plural "%1$d objects were loaded with fuzzy skin painting."
msgstr[0] ""

#: src/slic3r/GUI/NotificationManager.cpp:1843
msgid "Slicing finished."
msgstr "切片完成。"

#: src/slic3r/GUI/NotificationManager.cpp:1843
msgid "Export G-Code."
msgstr "匯出G-code。"

#: src/slic3r/GUI/NotificationManager.cpp:1843
msgid "Export."
msgstr "匯出。"

#: src/slic3r/GUI/NotificationManager.cpp:2191
#: src/slic3r/GUI/NotificationManager.cpp:2218
#: src/slic3r/GUI/NotificationManager.cpp:2226
#: src/slic3r/GUI/NotificationManager.cpp:2237 src/slic3r/GUI/Plater.cpp:2261
msgid "WARNING:"
msgstr "警告："

#: src/slic3r/GUI/NotificationManager.cpp:2352
msgid "Exporting finished."
msgstr "匯出完成。"

#: src/slic3r/GUI/NotificationManager.cpp:2360
msgid "Bulk export finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2549
#: src/slic3r/GUI/NotificationManager.cpp:2562
#: src/slic3r/GUI/UpdateDialogs.cpp:204
msgid "Download"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:72
msgid "Paint-on seam"
msgstr "繪製接縫"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:75
msgid "Sinking"
msgstr "下沉"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:77
msgid "Paint-on fuzzy skin"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:118
msgid "Instances"
msgstr "實例"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:122
#: src/slic3r/GUI/ObjectDataViewModel.cpp:283
#, c-format, boost-format
msgid "Instance %d"
msgstr "實例 %d"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:129 src/slic3r/GUI/Tab.cpp:5426
#: src/slic3r/GUI/Tab.cpp:5941
msgid "Layers"
msgstr "打印層"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:158
msgid "Range"
msgstr "範圍"

#: src/slic3r/GUI/OpenGLManager.cpp:383
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL ES 3.0 capable graphics driver to run "
"correctly, \n"
"while OpenGL version %s, renderer %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:386
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL 3.2 capable graphics driver to run correctly,\n"
"while OpenGL version %s, renderer %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:390
msgid "You may need to update your graphics card driver."
msgstr "您可能需要更新顯示卡驅動程式。"

#: src/slic3r/GUI/OpenGLManager.cpp:393
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
msgstr ""
"解決方式是經由命令列視窗執行 prusa-slicer.exe --sw-renderer 來啟動帶有軟體渲"
"染 3D 圖形功能的 PrusaSlicer。"

#: src/slic3r/GUI/OpenGLManager.cpp:395
msgid "Unsupported OpenGL version"
msgstr "不支援的 OpenGL 版本"

#: src/slic3r/GUI/OpenGLManager.cpp:402
#, c-format, boost-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""
"無法匯入以下著色器：\n"
"%s"

#: src/slic3r/GUI/OpenGLManager.cpp:403
msgid "Error loading shaders"
msgstr "匯入著色器時出錯"

#: src/slic3r/GUI/OptionsGroup.cpp:116
msgid "Edit Custom G-code"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:277
msgid "Unavailable for this method."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:63
msgid "Delete this preset from this printer device"
msgstr "從此打印機設備中刪除此預設"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:95
msgid "This printer will be shown in the presets list as"
msgstr "該打印機將在預設列表中顯示為"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:185
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:211 src/slic3r/GUI/Plater.cpp:6509
#: src/slic3r/GUI/UserAccountCommunication.cpp:94
#: src/slic3r/GUI/UserAccountCommunication.cpp:120
msgid "This system doesn't support storing passwords securely"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:194
#: src/slic3r/GUI/UserAccountCommunication.cpp:103
msgid "Failed to save credentials to the system password store."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:248
msgid "Type here the name of your printer device"
msgstr "在此處鍵入您的打印機設備的名稱"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:259
msgid "Descriptive name for the printer"
msgstr "打印機的描述性名稱"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:263
msgid "Add preset for this printer device"
msgstr "為此打印機設備添加預設"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:307 src/slic3r/GUI/Tab.cpp:2613
msgid "Print Host upload"
msgstr "打印主機上傳"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:368
msgid "Connection to printers connected via the print host failed."
msgstr "經由打印主機連接的打印機連接失敗。"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:410
msgid "Test"
msgstr "測試"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:415
msgid "Could not get a valid Printer Host reference"
msgstr "無法獲得有效的打印機主機參考資料"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:427
msgid "Success!"
msgstr "完成！"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:437
msgid "Refresh Printers"
msgstr "重新匯入打印機"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:480
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS CA 檔案並不是必要的。只有在您使用帶有自簽認證的 HTTPS 時才需要它。"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:490
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "認證檔案（*.crt、*.pem）|*.crt;*.pem|所有檔案|*.*"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:491
msgid "Open CA certificate file"
msgstr "打開 CA 認證檔案"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:521
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr "在這個系統中，%s 使用來自系統認證或金鑰的 HTTPS 認證。"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:522
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr "要使用自定義 CA 檔案，請將您的 CA 檔案匯入認證存儲/金鑰。"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:540
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:554
msgid "Storing passwords"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:541
#, boost-format
msgid ""
"On this system, %1% uses the system password store to safely store and read "
"passwords and API keys."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:555
#, boost-format
msgid "On this system, %1% cannot access the system password store."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:556
msgid "Passwords and API keys are stored in plain text."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:840
msgid "Unexpected character"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:896
msgid "You have to enter a printer name."
msgstr "您必須輸入打印機名稱。"

#. TRN: The placeholder expands to https://connect.prusa3d.com. The warning shows when someone select PrusaConnect physical printer, but enters different URL.
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:908
#, boost-format
msgid "URL of Prusa Connect is different from %1%. Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:922
#, boost-format
msgid "Printer with name \"%1%\" already exists."
msgstr "命名為 \"%1%\" 的打印機已存在。"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:923
msgid "Replace?"
msgstr "要取代嗎？"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:950
#, boost-format
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] "以下打印機預設已複製：%1% 打印機 \"%2%\" 的上述預設將僅使用一次。"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:1007
msgid "It's not possible to delete the last related preset for the printer."
msgstr "無法刪除打印機最後一個相關預設。"

#: src/slic3r/GUI/Plater.cpp:354
#, boost-format
msgid "Do you want to save the changes to \"%1%\"?"
msgstr "您要將變更儲存到 \"%1%\" 嗎？"

#: src/slic3r/GUI/Plater.cpp:355 src/slic3r/GUI/UnsavedChangesDialog.cpp:932
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1652
msgid "Save"
msgstr "儲存"

#: src/slic3r/GUI/Plater.cpp:355 src/slic3r/GUI/UnsavedChangesDialog.cpp:926
msgid "Discard"
msgstr "捨棄"

#: src/slic3r/GUI/Plater.cpp:360 src/slic3r/GUI/Preferences.cpp:387
msgid "Ask for unsaved changes in project"
msgstr "是否詢問項目中未儲存的變更"

#: src/slic3r/GUI/Plater.cpp:363
msgid ""
"You will not be asked about it again, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""
"在以下情況下，您不會再被問到：\n"
"- 關閉 PrusaSlicer，\n"
"- 匯入或建立新項目"

#: src/slic3r/GUI/Plater.cpp:829
#, c-format, boost-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr "退出成功。現在您可以從電腦中安全的移除設備 %s(%s)。"

#: src/slic3r/GUI/Plater.cpp:835
#, c-format, boost-format
msgid "Ejecting of device %s(%s) has failed."
msgstr "退出設備 %s(%s) 時失敗。"

#: src/slic3r/GUI/Plater.cpp:873 src/slic3r/GUI/Plater.cpp:4426
msgid "New Project"
msgstr "新項目"

#: src/slic3r/GUI/Plater.cpp:954
msgid "Logged out from Prusa Account."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:976
#, boost-format
msgid "Logged to Prusa Account as %1%."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1002 src/slic3r/GUI/Plater.cpp:1022
msgid "Failed to connect to Prusa Account."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1082
msgid "Failed to select printer from Prusa Connect."
msgstr ""

#. TRN: This is a hyperlink in a notification. It is preceded by a message from PrusaAccount (therefore not in this dictionary)
#. saying something like "connection not established, I will keep trying".
#: src/slic3r/GUI/Plater.cpp:1110
msgid "Stop now."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1195
msgid "Expand sidebar"
msgstr "展開側邊欄"

#: src/slic3r/GUI/Plater.cpp:1244
msgid ""
"The preset below was temporarily installed on the active instance of "
"PrusaSlicer"
msgid_plural ""
"The presets below were temporarily installed on the active instance of "
"PrusaSlicer"
msgstr[0] "下面的預設是臨時安裝在 PrusaSlicer 的啟用實例上"

#: src/slic3r/GUI/Plater.cpp:1343
msgid "PrintRequest can only be loaded if an SLA printer is selected."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1390
#, boost-format
msgid "Failed loading file \"%1%\" due to an invalid configuration."
msgstr "由於設定無效，匯入檔案“%1%”失敗。"

#: src/slic3r/GUI/Plater.cpp:1415
msgid "Configuration was not loaded"
msgstr ""

#. TRN: %1% is filename of the project, %2% is url link.
#: src/slic3r/GUI/Plater.cpp:1418
#, boost-format
msgid ""
"<b>Unable to load configuration from project\n"
"\n"
"File: </b>%1%\n"
"\n"
"This project was created in a newer version of PrusaSlicer. Only the "
"geometry was loaded.\n"
"Update to the latest version for full compatibility.\n"
"For more info: <a href=%2%>%2%</a>"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1433
msgid ""
"The selected 3MF file contains a post-processing script.\n"
"Please review the script carefully before exporting G-code."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1474
#, c-format, boost-format
msgid ""
"Object size from file %s appears to be zero.\n"
"This object has been removed from the model"
msgid_plural ""
"Objects size from file %s appears to be zero.\n"
"These objects have been removed from the model"
msgstr[0] ""
"檔案 %s 中的模型大小似乎為零。\n"
"該模型已從模型中移除"

#: src/slic3r/GUI/Plater.cpp:1478
msgid "The size of the object is zero"
msgstr "模型的大小為零"

#: src/slic3r/GUI/Plater.cpp:1490
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
"檔案 %s 中模型的尺寸似乎是以公尺(Metre)為單位定義的。\n"
"PrusaSlicer 的內部單位是公釐(mm)。是否要重新計算模型的尺寸？"

#: src/slic3r/GUI/Plater.cpp:1494 src/slic3r/GUI/Plater.cpp:1512
msgid "The object is too small"
msgstr "模型太小"

#: src/slic3r/GUI/Plater.cpp:1495 src/slic3r/GUI/Plater.cpp:1513
msgid "Apply to all the remaining small objects being loaded."
msgstr "應用於其他的正在匯入的小模型。"

#: src/slic3r/GUI/Plater.cpp:1508
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
"檔案 %s 中模型的尺寸似乎是以英寸(inches)為單位定義的。\n"
"PrusaSlicer 的內部單位是公釐(mm)。是否要重新計算模型的尺寸？"

#: src/slic3r/GUI/Plater.cpp:1527
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""
"該檔案包含多個多種高度的模型。\n"
"與其將它們視為多個模型，\n"
"不如將檔案作為具有多個部分的單個模型匯入？"

#: src/slic3r/GUI/Plater.cpp:1530 src/slic3r/GUI/Plater.cpp:1636
msgid "Multi-part object detected"
msgstr "檢測到多部分模型"

#: src/slic3r/GUI/Plater.cpp:1531
msgid "Apply to all objects being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1542
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr "該檔案無法在簡單模式下匯入。你想切換到高級模式嗎？"

#: src/slic3r/GUI/Plater.cpp:1543
msgid "Detected advanced data"
msgstr "檢測到高級資料"

#: src/slic3r/GUI/Plater.cpp:1596
#, boost-format
msgid ""
"Material preset was not loaded:\n"
" - %1%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1633
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""
"為多材料打印機匯入了多個模型。\n"
"我應該將這些檔案視為代表具有多個部分的單個模型，\n"
"而不是將它們視為多個模型嗎？"

#: src/slic3r/GUI/Plater.cpp:1769
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr "您的模型似乎太大了，因此已自動縮小以適合您的打印載台。"

#: src/slic3r/GUI/Plater.cpp:1770
msgid "Object too large?"
msgstr "模型太大？"

#: src/slic3r/GUI/Plater.cpp:1850
msgid "Export STL file:"
msgstr "匯出為 STL 檔："

#: src/slic3r/GUI/Plater.cpp:1857
msgid "Export AMF file:"
msgstr "匯出為 AMF 檔："

#: src/slic3r/GUI/Plater.cpp:1863
msgid "Save file as:"
msgstr "將檔案另存為："

#: src/slic3r/GUI/Plater.cpp:1869
msgid "Export OBJ file:"
msgstr "匯出為 OBJ 檔："

#: src/slic3r/GUI/Plater.cpp:2019
msgid "Delete object which is a part of cut object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2020
msgid "You try to delete an object which is a part of a cut object."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2021
msgid ""
"This action will break a cut information.\n"
"After that PrusaSlicer can't guarantee model consistency"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2024
msgid "Delete object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2029
msgid "Delete Object"
msgstr "刪除模型"

#: src/slic3r/GUI/Plater.cpp:2048
msgid "Delete All Objects"
msgstr "刪除全部模型"

#: src/slic3r/GUI/Plater.cpp:2077
msgid "Reset Project"
msgstr "重置項目"

#: src/slic3r/GUI/Plater.cpp:2123
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"splitting the object."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2131
msgid ""
"The selected object couldn't be split because it contains only one solid "
"part."
msgstr "所選模型無法拆開，因為它只包含一個實體部分。"

#: src/slic3r/GUI/Plater.cpp:2138
msgid "All non-solid parts (modifiers) were deleted"
msgstr "刪除了所有非實體部分（修改器）"

#: src/slic3r/GUI/Plater.cpp:2140
msgid "Split to Objects"
msgstr "拆開為模型"

#: src/slic3r/GUI/Plater.cpp:2207
msgid ""
"An object has custom support enforcers which will not be used because "
"supports are disabled."
msgstr "模型具有自定義支撐執行器，由於支撐被禁用，因此不會使用這些執行器。"

#: src/slic3r/GUI/Plater.cpp:2209
msgid "Enable supports for enforcers only."
msgstr ""

#. TRN: Text of a notification, followed by (single) hyperlink to two of the config options. The sentence had to be split because of the hyperlink, sorry.
#. The hyperlink part of the sentence reads "'Bed temperature by extruder' and 'Wipe tower extruder'", and it is also to be translated.
#: src/slic3r/GUI/Plater.cpp:2223
msgid ""
"Bed temperatures for the used filaments differ significantly.\n"
"For multi-material prints it is recommended to set the "
msgstr ""

#. TRN: The other part of the sentence starting "Bed temperatures for the used" (also in the dictionary). Sorry for splitting it, technical reasons -
#. this part of the sentence is a hyperlink.
#: src/slic3r/GUI/Plater.cpp:2227
msgid "'Bed temperature by extruder' and 'Wipe tower extruder'"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2235
msgid ""
"Filament shrinkage will not be used because filament shrinkage for the used "
"filaments differs significantly."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2239
msgid ""
"Using the wipe tower for extruders with different nozzle diameters is "
"experimental, so proceed with caution."
msgstr ""

#. TRN: This is a first part of the notification text:
#. "Printing supports with different nozzle diameters is experimental. For best results, switch to Organic supports and assign a specific extruder for supports."
#: src/slic3r/GUI/Plater.cpp:2245
msgid ""
"Printing supports with different nozzle diameters is experimental. For best "
"results, switch to Organic supports and"
msgstr ""

#. TRN: This is a second part (hyperlink) of the notification text:
#. "Printing supports with different nozzle diameters is experimental. For best results, switch to Organic supports and assign a specific extruder for supports."
#: src/slic3r/GUI/Plater.cpp:2249
msgid "assign a specific extruder for supports."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2551 src/slic3r/GUI/Plater.cpp:6451
#: src/slic3r/GUI/Sidebar.cpp:500
msgid "Slice now"
msgstr "立刻切片"

#: src/slic3r/GUI/Plater.cpp:2603
msgid "Another export job is currently running."
msgstr "當前正在執行另一個匯出作業。"

#: src/slic3r/GUI/Plater.cpp:2689
msgid "Replace from:"
msgstr "取代自："

#: src/slic3r/GUI/Plater.cpp:2707
msgid "Unable to replace with more than one volume"
msgstr "無法取代超過一個體積"

#: src/slic3r/GUI/Plater.cpp:2707 src/slic3r/GUI/Plater.cpp:2793
msgid "Error during replace"
msgstr "取代時出錯"

#: src/slic3r/GUI/Plater.cpp:2785
msgid "Select the new file"
msgstr "選擇新檔案"

#: src/slic3r/GUI/Plater.cpp:2793
msgid "File for the replace wasn't selected"
msgstr "未選擇取代檔案"

#: src/slic3r/GUI/Plater.cpp:2880
msgid "Please select the file to reload"
msgstr "請選擇要重新匯入的檔案"

#: src/slic3r/GUI/Plater.cpp:2911 src/slic3r/GUI/Plater.cpp:4597
#: src/slic3r/GUI/Plater.cpp:4607
msgid "The selected file"
msgstr "所選檔案"

#: src/slic3r/GUI/Plater.cpp:2912
msgid "differs from the original file"
msgstr "與原始檔案不同"

#: src/slic3r/GUI/Plater.cpp:2912
msgid "Do you want to replace it"
msgstr "你想取代它嗎"

#: src/slic3r/GUI/Plater.cpp:2932 src/slic3r/GUI/Plater.cpp:2938
msgid "Reload from:"
msgstr "重新匯入自："

#: src/slic3r/GUI/Plater.cpp:3053
msgid "Unable to reload:"
msgstr "無法重新匯入："

#: src/slic3r/GUI/Plater.cpp:3058
msgid "Error during reload"
msgstr "重新匯入時出錯"

#: src/slic3r/GUI/Plater.cpp:3076
msgid "Reload all from disk"
msgstr "從磁碟機中重新匯入全部"

#: src/slic3r/GUI/Plater.cpp:3227 src/slic3r/GUI/Plater.cpp:3233
msgid "You are using template filament preset."
msgid_plural "You are using template filament presets."
msgstr[0] ""

#: src/slic3r/GUI/Plater.cpp:3229 src/slic3r/GUI/Plater.cpp:3234
msgid ""
"Please note that template presets are not customized for specific printer "
"and should only be used as a starting point for creating your own user "
"presets."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3230
msgid "More info at"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3407
msgid "There are active warnings concerning sliced models:"
msgstr "有關於切片模型的啟動警告："

#: src/slic3r/GUI/Plater.cpp:3413
msgid "generated warnings"
msgstr "產生的警告"

#: src/slic3r/GUI/Plater.cpp:3454
msgid "Slicing Cancelled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3761
msgid "3D editor view"
msgstr "3D 編輯器檢視"

#: src/slic3r/GUI/Plater.cpp:4239
msgid "Undo / Redo is processing"
msgstr "取消/重做正在處理"

#: src/slic3r/GUI/Plater.cpp:4241
#, boost-format
msgid ""
"Switching the printer technology from %1% to %2%.\n"
"Some %1% presets were modified, which will be lost after switching the "
"printer technology."
msgstr ""
"將打印機技術從 %1% 切換到 %2%。\n"
"修改了一些 %1% 預設，這些預設將在切換打印機技術後遺失。"

#: src/slic3r/GUI/Plater.cpp:4411
msgid "Creating a new project while the current project is modified."
msgstr "在修改當前項目的同時建立新項目。"

#: src/slic3r/GUI/Plater.cpp:4414
msgid "Creating a new project while some presets are modified."
msgstr "在修改某些預設的同時建立新項目。"

#: src/slic3r/GUI/Plater.cpp:4415
msgid "You can keep presets modifications to the new project or discard them"
msgstr "您可以保留對新項目的預設修改或丟掉它們"

#: src/slic3r/GUI/Plater.cpp:4416
msgid ""
"You can keep presets modifications to the new project, discard them or save "
"changes as new presets.\n"
"Note, if changes will be saved then new project wouldn't keep them"
msgstr ""
"您可以保留對新項目的預設修改、放棄它們或者將變更儲存為新的預設。\n"
"請注意，如果變更被儲存，那麼在新項目中就不會保留它們"

#: src/slic3r/GUI/Plater.cpp:4421
msgid "Creating a new project"
msgstr "建立一個新項目"

#: src/slic3r/GUI/Plater.cpp:4455
msgid "Load Project"
msgstr "匯入項目"

#: src/slic3r/GUI/Plater.cpp:4489
msgid "Import Object"
msgstr "匯入模型"

#: src/slic3r/GUI/Plater.cpp:4493
msgid "Import Objects"
msgstr "匯入模型"

#: src/slic3r/GUI/Plater.cpp:4523
msgid "Import SLA archive"
msgstr "匯入 SLA 存檔"

#: src/slic3r/GUI/Plater.cpp:4597 src/slic3r/GUI/Plater.cpp:4607
msgid "does not contain valid gcode."
msgstr "不包含有效的 gcode。"

#: src/slic3r/GUI/Plater.cpp:4598 src/slic3r/GUI/Plater.cpp:4608
msgid "Error while loading .gcode file"
msgstr "匯入 .gcode 檔案時出錯"

#: src/slic3r/GUI/Plater.cpp:4660 src/slic3r/GUI/Plater.cpp:4738
msgid "Unable to open the selected file."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4674
msgid "The selected file is already in ASCII format."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4690 src/slic3r/GUI/Plater.cpp:4768
#: src/slic3r/GUI/UpdateDialogs.cpp:240
#, boost-format
msgid "File %1% already exists. Do you wish to overwrite it?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4698 src/slic3r/GUI/Plater.cpp:4776
msgid "Unable to open output file."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4714 src/slic3r/GUI/Plater.cpp:4793
msgid "Error converting G-code file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4722
msgid "Successfully created G-code ASCII file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4723
msgid "Convert G-code file to ASCII format"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4752
msgid "The selected file is already in binary format."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4801
msgid "Successfully created G-code binary file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4802
msgid "Convert G-code file to binary format"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4864
#, boost-format
msgid "%1% - Multiple projects file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4874
msgid "There are several files being loaded, including Project files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4874 src/slic3r/GUI/Plater.cpp:4877
msgid "Select an action to apply to all files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4877
msgid "There are several files being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4879 src/slic3r/GUI/Plater.cpp:5196
msgid "Action"
msgstr "動作"

#: src/slic3r/GUI/Plater.cpp:4900
msgid "Import 3D models"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4913
msgid "Start a new instance of PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4927
msgid "Select one to load as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4938
msgid "Select only one file to load the configuration."
msgstr ""

#. TRN %1% is archive path
#: src/slic3r/GUI/Plater.cpp:4985
#, boost-format
msgid "Loading of a ZIP archive on path %1% has failed."
msgstr ""

#. TRN: First argument = path to file, second argument = error description
#: src/slic3r/GUI/Plater.cpp:5045
#, boost-format
msgid "Failed to unzip file to %1%: %2%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5055
#, boost-format
msgid "Failed to find unzipped file at %1%. Unzipping of file has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5175
msgid "Load project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5184
msgid "Open as project"
msgstr "作為項目打開"

#: src/slic3r/GUI/Plater.cpp:5185
msgid "Import 3D models only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5186
msgid "Import config only"
msgstr "僅匯入設定"

#: src/slic3r/GUI/Plater.cpp:5188
msgid "Start new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5191
msgid "Select an action to apply to the file"
msgstr "選擇要應用於檔案的操作"

#: src/slic3r/GUI/Plater.cpp:5212
msgid "Don't show again"
msgstr "不要再顯示"

#: src/slic3r/GUI/Plater.cpp:5253
msgid "You can open only one .gcode file at a time."
msgstr "您一次只能打開一個 .gcode 檔案。"

#: src/slic3r/GUI/Plater.cpp:5254
msgid "Drag and drop G-code file"
msgstr "拖放 G-code檔案"

#: src/slic3r/GUI/Plater.cpp:5347
#, boost-format
msgid ""
"You have several files for loading and \"%1%\" is one of them.\n"
"Please note that only one .zip file can be loaded at a time.\n"
"In this case we can load just \"%1%\".\n"
"\n"
"Would you like to continue anyway?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5351 src/slic3r/GUI/Plater.cpp:5367
msgid "Drag and drop several files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5364
msgid ""
"You have several files for loading.\n"
"Please note that only geometry will be uploaded from all 3mf files.\n"
"\n"
"Would you like to continue anyway?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5376
msgid "Load File"
msgstr "匯入檔案"

#: src/slic3r/GUI/Plater.cpp:5381
msgid "Load Files"
msgstr "匯入檔案"

#: src/slic3r/GUI/Plater.cpp:5431
msgid "All objects will be removed, continue?"
msgstr "將移除所有模型，繼續嗎？"

#: src/slic3r/GUI/Plater.cpp:5442
msgid "Delete Selected Objects"
msgstr "刪除選定模型"

#: src/slic3r/GUI/Plater.cpp:5451
msgid "Increase Instances"
msgstr "增加實例"

#: src/slic3r/GUI/Plater.cpp:5504
msgid "Decrease Instances"
msgstr "減少實例"

#: src/slic3r/GUI/Plater.cpp:5562
msgid "Enter the number of copies:"
msgstr "輸入副本數量："

#: src/slic3r/GUI/Plater.cpp:5563
msgid "Copies of the selected object"
msgstr "所選模型的副本"

#: src/slic3r/GUI/Plater.cpp:5566
#, c-format, boost-format
msgid "Set numbers of copies to %d"
msgstr "將副本數量設定為 %d"

#: src/slic3r/GUI/Plater.cpp:5590
msgid "Fill bed"
msgstr "填滿載台"

#. TRN The placeholder %1% is the file extension the user has selected.
#: src/slic3r/GUI/Plater.cpp:5751
#, boost-format
msgid ""
"Cannot save binary G-code with %1% extension.\n"
"\n"
"Use a different extension or disable <a href=%2%>binary G-code export</a> in "
"Printer Settings."
msgstr ""

#. TRN The placeholder %1% is the file extension the user has selected.
#: src/slic3r/GUI/Plater.cpp:5757
#, boost-format
msgid ""
"Cannot save ASCII G-code with %1% extension.\n"
"\n"
"Use a different extension or enable <a href=%2%>binary G-code export</a> in "
"Printer Settings."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5818
msgid "The provided file name is not valid."
msgstr "所提供的檔案名稱無效。"

#: src/slic3r/GUI/Plater.cpp:5819
msgid "The following characters are not allowed by a FAT file system:"
msgstr "FAT 檔案系統不允許使用以下字元："

#: src/slic3r/GUI/Plater.cpp:5837
msgid "Save G-code file as:"
msgstr "將 G-code檔另存為:"

#: src/slic3r/GUI/Plater.cpp:5837
msgid "Save SL1 / SL1S file as:"
msgstr "將 SL1 / SL1S 檔案另存為："

#: src/slic3r/GUI/Plater.cpp:5861
msgid "Choose export directory:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6008
msgid "Export beds"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6081
msgid ""
"Unable to perform boolean operation on model meshes. Only positive parts "
"will be exported."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6289
msgid ""
"Are you sure you want to store original SVGs with their local paths into the "
"3MF file?\n"
"If you hit 'NO', all SVGs in the project will not be editable any more."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6291
msgid "Private protection"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6320
msgid ""
"The plater is empty.\n"
"Do you want to save the project?"
msgstr ""
"載台是空的。\n"
"您要儲存項目嗎？"

#: src/slic3r/GUI/Plater.cpp:6320
msgid "Save project"
msgstr "儲存項目"

#: src/slic3r/GUI/Plater.cpp:6366
msgid "Unable to save file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6552
msgid "Failed to select a printer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6574
msgid "Failed to read response from Prusa Connect server. Upload is cancelled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6656 src/slic3r/GUI/Sidebar.cpp:533
msgid "Send all to Connect"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6819
msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6819 src/slic3r/GUI/PrintHostDialogs.cpp:136
msgid "Upload and Print"
msgstr "上傳和打印"

#: src/slic3r/GUI/Plater.cpp:7194
msgid ""
"Sequential arrange for a single bed is only allowed when all instances of "
"the affected objects are on the same bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:7235
#, c-format, boost-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""
"佈局忽略了無法放入整個載台的以下模型：\n"
"%s"

#: src/slic3r/GUI/Plater.cpp:7289
msgid "Export"
msgstr "匯出"

#: src/slic3r/GUI/Plater.cpp:7290 src/slic3r/GUI/Sidebar.cpp:481
msgid "Send to printer"
msgstr "傳送到打印機"

#: src/slic3r/GUI/Plater.cpp:7466
msgid "Paste From Clipboard"
msgstr "從剪貼簿貼上"

#: src/slic3r/GUI/Preferences.cpp:283 src/slic3r/GUI/Tab.cpp:2654
#: src/slic3r/GUI/Tab.cpp:2968 src/slic3r/GUI/Tab.cpp:3109
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1336
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1914
msgid "General"
msgstr "一般"

#: src/slic3r/GUI/Preferences.cpp:301
msgid "Remember output directory"
msgstr "記住輸出目錄"

#: src/slic3r/GUI/Preferences.cpp:302
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"如果啟用這個，PrusaSlicer 將提示最後一次輸出目錄而不是原來輸入這個檔案的目"
"錄。"

#: src/slic3r/GUI/Preferences.cpp:306
msgid "Background processing"
msgstr "背景處理"

#: src/slic3r/GUI/Preferences.cpp:307
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"如果啟用此功能，PrusaSlicer 將在匯入模型後立即對其進行預先處理，以便在匯出 G-"
"code 時節省時間。"

#: src/slic3r/GUI/Preferences.cpp:312
msgid "Alert when supports needed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:313
msgid ""
"If this is enabled, Slic3r will raise alerts when it detects issues in the "
"sliced object, that can be resolved with supports (and brim). Examples of "
"such issues are floating object parts, unsupported extrusions and low bed "
"adhesion."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:323
msgid "Export sources full pathnames to 3mf and amf"
msgstr "將來源完整路徑名稱匯出到 3mf 和 amf"

#: src/slic3r/GUI/Preferences.cpp:324
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr "如果啟用這個，則允許從磁碟機重新匯入命令在調用時自動查詢並匯入檔案。"

#: src/slic3r/GUI/Preferences.cpp:331
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr "如果啟用，PrusaSlicer 將成為打開.3mf檔的預設應用程式。"

#: src/slic3r/GUI/Preferences.cpp:336
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr "如果啟用，PrusaSlicer 將成為打開stl檔的預設應用程式。"

#: src/slic3r/GUI/Preferences.cpp:345
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"如果啟用，PrusaSlicer 會在背景下載系統預設的更新。這些更新被下載到一個臨時位"
"置。當新的版本可用時，它會在應用程式啟動時提供您使用。"

#: src/slic3r/GUI/Preferences.cpp:350
msgid "Suppress \" - default - \" presets"
msgstr "停用 \"-預設-\" 指定"

#: src/slic3r/GUI/Preferences.cpp:351
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"一旦有任何可用的有效預設，請在打印/線材/打印機選擇中 停用 \"-預設-\" 指定。"

#: src/slic3r/GUI/Preferences.cpp:355
msgid "Suppress \" Template \" filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:356
msgid ""
"Suppress \" Template \" filament presets in configuration wizard and sidebar "
"visibility."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:360
msgid "Show incompatible print and filament presets"
msgstr "顯示不相容的打印和線材預設"

#: src/slic3r/GUI/Preferences.cpp:361
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"選中後，打印和線材預設會顯示在預設編輯器中，即使它們被標記為與當前打印機不相"
"容"

#: src/slic3r/GUI/Preferences.cpp:368
msgid "Show load project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:369
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application or open it from a browser, shows a dialog asking to select the "
"action to take on the file to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:375 src/slic3r/GUI/Preferences.cpp:379
msgid "Allow just a single PrusaSlicer instance"
msgstr "只允許一個 PrusaSlicer 執行實例"

#: src/slic3r/GUI/Preferences.cpp:376
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""
"在 OSX 上，預設情況下總是只有一個應用程式實例在運行。但是卻允許從命令視窗執行"
"同一應用程式的多個實例。當您設定了這個設定後將只允許一個實例執行。"

#: src/slic3r/GUI/Preferences.cpp:380
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""
"如果啟用了此功能，則當啟動了 PrusaSlicer 且同一 PrusaSlicer 的另一個實例已在"
"執行時，該實例將被重新啟動。"

#: src/slic3r/GUI/Preferences.cpp:388
msgid ""
"Always ask for unsaved changes in project, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""
"在以下情況下，總是詢問項目中未儲存的變更：\n"
"- 關閉 PrusaSlicer，\n"
"- 匯入或建立新項目"

#: src/slic3r/GUI/Preferences.cpp:396
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:953
msgid ""
"Ask to save unsaved changes in presets when closing the application or when "
"loading a new project"
msgstr "關閉應用程式或匯入新項目時要求儲存未儲存的預設變更"

#: src/slic3r/GUI/Preferences.cpp:397
msgid ""
"Always ask for unsaved changes in presets, when: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""
"在以下情況下，始終要求對預設進行未儲存的變更：\n"
"- 在修改某些預設時關閉 PrusaSlicer，\n"
"- 在修改某些預設時匯入新項目"

#: src/slic3r/GUI/Preferences.cpp:403
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:952
msgid "Ask for unsaved changes in presets when selecting new preset"
msgstr "選擇新預設時詢問預設中未儲存的變更"

#: src/slic3r/GUI/Preferences.cpp:404
msgid ""
"Always ask for unsaved changes in presets when selecting new preset or "
"resetting a preset"
msgstr "選擇新預設或重置預設時，始終詢問未儲存的預設變更"

#: src/slic3r/GUI/Preferences.cpp:408
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:951
msgid "Ask for unsaved changes in presets when creating new project"
msgstr "建立新項目時詢問預設中未儲存的變更"

#: src/slic3r/GUI/Preferences.cpp:409
msgid "Always ask for unsaved changes in presets when creating new project"
msgstr "建立新項目時始終詢問未儲存的預設變更"

#: src/slic3r/GUI/Preferences.cpp:415
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr "將 .gcode 檔案關聯到 PrusaSlicer 的 G-code 檢視器"

#: src/slic3r/GUI/Preferences.cpp:416
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""
"如果啟用，將以 PrusaSlicer 的 G-code 檢視器設定為打開 .gcode 檔案的預設應用程"
"式。"

#: src/slic3r/GUI/Preferences.cpp:419
msgid "Associate .bgcode files to PrusaSlicer G-code Viewer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:420
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"bgcode files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:427
msgid "Use Retina resolution for the 3D scene"
msgstr "對 3D 場景使用 Retina 解析度"

#: src/slic3r/GUI/Preferences.cpp:428
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"如果啟用此功能，3D 場景將以 Retina 解析度呈現。如果您遇到 3D 性能問題，禁用此"
"選項可能會有所幫助。"

#: src/slic3r/GUI/Preferences.cpp:437 src/slic3r/GUI/Preferences.cpp:438
msgid "Show splash screen"
msgstr "顯示啟動畫面"

#: src/slic3r/GUI/Preferences.cpp:443
msgid "If enabled, PrusaSlicer will be open at the position it was closed"
msgstr "如果啟用，PrusaSlicer 將在上一次關閉時的位置打開"

#: src/slic3r/GUI/Preferences.cpp:448
msgid "Clear Undo / Redo stack on new project"
msgstr "清除新項目上的取消/重做堆疊"

#: src/slic3r/GUI/Preferences.cpp:449
msgid ""
"Clear Undo / Redo stack on new project or when an existing project is loaded."
msgstr "清除新項目或匯入現有項目時的取消/重做堆疊。"

#: src/slic3r/GUI/Preferences.cpp:454
msgid "Enable support for legacy 3DConnexion devices"
msgstr "啟用傳統 3DConnexion 設備的支援"

#: src/slic3r/GUI/Preferences.cpp:455
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr "如果啟用這個，則按下 CTRL+M 可以打開舊版 3DConnexion 設備的設定對話框"

#: src/slic3r/GUI/Preferences.cpp:462
msgid "Camera"
msgstr "相機"

#: src/slic3r/GUI/Preferences.cpp:472
msgid "Use perspective camera"
msgstr "使用透視相機"

#: src/slic3r/GUI/Preferences.cpp:473
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr "如果啟用，則使用透視相機。若未啟用，則使用正交相機。"

#: src/slic3r/GUI/Preferences.cpp:477
msgid "Use free camera"
msgstr "使用自由相機"

#: src/slic3r/GUI/Preferences.cpp:478
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr "如果啟用，則使用自由相機。若未啟用，則使用受限相機。"

#: src/slic3r/GUI/Preferences.cpp:482
msgid "Reverse direction of zoom with mouse wheel"
msgstr "使用滑鼠滾輪反向縮放"

#: src/slic3r/GUI/Preferences.cpp:483
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr "如果啟用，則滑鼠滾輪反向縮放"

#: src/slic3r/GUI/Preferences.cpp:489
msgid "GUI"
msgstr "GUI"

#: src/slic3r/GUI/Preferences.cpp:521
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer. If disabled, changes made using the sequential slider, "
"in preview, apply to the whole gcode."
msgstr ""
"如果啟用，在預覽中使用順序滑塊所做的變更僅適用於 gcode 頂層。如果禁用，在預覽"
"中使用順序滑塊所做的變更將應用於整個 gcode。"

#: src/slic3r/GUI/Preferences.cpp:527
msgid "Show sidebar collapse/expand button"
msgstr "顯示側邊欄折疊/展開按鈕"

#: src/slic3r/GUI/Preferences.cpp:528
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr "如果啟用，折疊側邊欄的按鈕將出現在 3D 場景的右上角"

#: src/slic3r/GUI/Preferences.cpp:539
msgid "Use colors for axes values in Manipulation panel"
msgstr "在操作面板中使用顏色於軸值欄位"

#: src/slic3r/GUI/Preferences.cpp:540
msgid ""
"If enabled, the axes names and axes values will be colorized according to "
"the axes colors. If disabled, old UI will be used."
msgstr ""
"如果啟用這個，軸值的欄位將根據軸顏色進行上色。如果禁用，將使用舊的 UI。"

#: src/slic3r/GUI/Preferences.cpp:545
msgid "Order object volumes by types"
msgstr "按類型排列模型體積"

#: src/slic3r/GUI/Preferences.cpp:546
msgid ""
"If enabled, volumes will be always ordered inside the object. Correct order "
"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
"Modifiers. But one of the model parts have to be on the first place."
msgstr ""
"如果啟用這個，模型內總是以體積的大小排序。正確的順序是模型零件、挖空模型、修"
"改器、支撐阻斷器和支撐執行器。如果禁用，您可以重新排列模型零件、挖空模型和修"
"改器。但是其中一個模型零件必須放在第一位。"

#: src/slic3r/GUI/Preferences.cpp:551
msgid "Show non-manifold edges"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:552
msgid "If enabled, shows non-manifold edges."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:556
msgid "Allow automatically color change"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:557
msgid ""
"If enabled, related notification will be shown, when sliced object looks "
"like a logo or a sign."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:570
msgid "Show \"Tip of the day\" notification after start"
msgstr "啟動後顯示“每日提示”的通知畫面"

#: src/slic3r/GUI/Preferences.cpp:571
msgid "If enabled, useful hints are displayed at startup."
msgstr "如果啟用，對於軟體使用會有幫助的提示將在啟動時顯示。"

#: src/slic3r/GUI/Preferences.cpp:575
msgid "Notify about new releases"
msgstr "通知新的版本發佈"

#: src/slic3r/GUI/Preferences.cpp:576
msgid ""
"You will be notified about new release after startup acordingly: All = "
"Regular release and alpha / beta releases. Release only = regular release."
msgstr ""
"啟用此選項後，您將在啟動後收到有關新版本的通知：全部 = 定期發佈版本和 "
"alpha / beta 版本。僅發佈版 = 定期發佈。"

#: src/slic3r/GUI/Preferences.cpp:579
msgid "Release only"
msgstr "僅發佈版"

#: src/slic3r/GUI/Preferences.cpp:586
msgid "Use custom size for toolbar icons"
msgstr "讓工具欄圖示使用自定義大小"

#: src/slic3r/GUI/Preferences.cpp:587
msgid "If enabled, you can change size of toolbar icons manually."
msgstr "如果啟用，您可以手動變更工具欄圖示的大小。"

#: src/slic3r/GUI/Preferences.cpp:605 src/slic3r/GUI/Tab.cpp:1732
msgid "Other"
msgstr "其他"

#: src/slic3r/GUI/Preferences.cpp:620
msgid "Use binary G-code when the printer supports it"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:621
msgid ""
"If the 'Supports binary G-code' option is enabled in Printer Settings, "
"checking this option will result in the export of G-code in binary format."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:627
msgid "If enabled, PrusaSlicer will not open a hyperlinks in your browser."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:633
msgid "Show STEP file import parameters"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:634
msgid ""
"If enabled, PrusaSlicer will show a dialog with quality selection when "
"importing a STEP file."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:638
msgid "Show \"Log in\" button in application top bar"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:639
msgid ""
"If enabled, PrusaSlicer will show up \"Log in\" button in application top "
"bar."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:643
msgid "Allow downloads from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:644
msgid "If enabled, PrusaSlicer will be allowed to download from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:654
msgid "Render"
msgstr "算繪"

#: src/slic3r/GUI/Preferences.cpp:664
msgid "Use environment map"
msgstr "使用環境貼圖"

#: src/slic3r/GUI/Preferences.cpp:665
msgid "If enabled, renders object using the environment map."
msgstr "如果啟用，則使用環境貼圖算繪模型。"

#: src/slic3r/GUI/Preferences.cpp:674
msgid "Dark mode"
msgstr "深色模式"

#: src/slic3r/GUI/Preferences.cpp:684
msgid "Enable dark mode"
msgstr "啟用深色模式"

#: src/slic3r/GUI/Preferences.cpp:685
msgid ""
"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
msgstr "如果啟用，UI 將使用深色模式顏色。如果禁用，將使用舊的 UI。"

#: src/slic3r/GUI/Preferences.cpp:692
msgid "Use system menu for application"
msgstr "以系統選單的模式來使用"

#: src/slic3r/GUI/Preferences.cpp:693
msgid ""
"If enabled, application will use the standard Windows system menu,\n"
"but on some combination of display scales it can look ugly. If disabled, old "
"UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:770
msgid "Changes for the critical options"
msgstr "關鍵選項的變更"

#: src/slic3r/GUI/Preferences.cpp:772
msgid ""
"Changing some options will trigger application restart.\n"
"You will lose the content of the plater."
msgstr ""
"變更某些選項將觸發應用程式重啟。\n"
"您將遺失載台上面的內容。"

#: src/slic3r/GUI/Preferences.cpp:953
msgid "Icon size in a respect to the default size"
msgstr "相對於預設大小的圖示大小"

#: src/slic3r/GUI/Preferences.cpp:968
msgid "Select toolbar icon size in respect to the default one."
msgstr "選擇相對於預設圖示的工具欄圖示大小。"

#: src/slic3r/GUI/Preferences.cpp:1003
msgid "Layout Options"
msgstr "佈局選項"

#: src/slic3r/GUI/Preferences.cpp:1012
msgid "Old regular layout with the tab bar"
msgstr "帶標籤欄的舊款佈局"

#: src/slic3r/GUI/Preferences.cpp:1013
msgid "Settings in non-modal window"
msgstr "非模態視窗中的設定"

#: src/slic3r/GUI/Preferences.cpp:1043
msgid "Text colors"
msgstr "文字顏色"

#: src/slic3r/GUI/Preferences.cpp:1067
msgid "Mode markers"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1095
msgid "Application font size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1135
msgid "Revert font to default"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1147
msgid "Font size"
msgstr ""

#: src/slic3r/GUI/PresetArchiveDatabase.cpp:349
#, boost-format
msgid "Cannot select local source from path: %1%. It was not extracted."
msgstr ""

#: src/slic3r/GUI/PresetArchiveDatabase.cpp:358
#, boost-format
msgid "Cannot select two sources with the same id: %1% and %2%"
msgstr ""

#: src/slic3r/GUI/PresetArchiveDatabase.cpp:453
#, boost-format
msgid "Failed to add local archive %1%. Path already used."
msgstr ""

#: src/slic3r/GUI/PresetArchiveDatabase.cpp:462
#, boost-format
msgid "Failed to extract local archive %1%."
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:289
#: src/slic3r/GUI/PresetComboBoxes.cpp:357
#: src/slic3r/GUI/PresetComboBoxes.cpp:1088
#: src/slic3r/GUI/PresetComboBoxes.cpp:1162
#: src/slic3r/GUI/PresetComboBoxes.cpp:1384
#: src/slic3r/GUI/PresetComboBoxes.cpp:1438
msgid "System presets"
msgstr "系統預設"

#: src/slic3r/GUI/PresetComboBoxes.cpp:379
#: src/slic3r/GUI/PresetComboBoxes.cpp:1183
#: src/slic3r/GUI/PresetComboBoxes.cpp:1461
msgid "User presets"
msgstr "使用者預設"

#: src/slic3r/GUI/PresetComboBoxes.cpp:394
#: src/slic3r/GUI/PresetComboBoxes.cpp:1195
#: src/slic3r/GUI/PresetComboBoxes.cpp:1476
msgid "Template presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:409
msgid "Incompatible presets"
msgstr "不相容的預設"

#: src/slic3r/GUI/PresetComboBoxes.cpp:456
#, boost-format
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr "您確定要刪除“%1%”打印機嗎？"

#: src/slic3r/GUI/PresetComboBoxes.cpp:458
msgid "Delete Physical Printer"
msgstr "刪除打印機"

#: src/slic3r/GUI/PresetComboBoxes.cpp:711
msgid "Click to edit preset"
msgstr "點擊編輯預設"

#. TRN: this is part of the infoline below Printer Settings dropdown, informing about number of printers available/offline/printing in Prusa Connect.
#: src/slic3r/GUI/PresetComboBoxes.cpp:752
#: src/slic3r/GUI/PresetComboBoxes.cpp:1021
msgid "available"
msgstr ""

#. TRN: this is part of the infoline below Printer Settings dropdown, informing about number of printers available/offline/printing in Prusa Connect.
#: src/slic3r/GUI/PresetComboBoxes.cpp:757
#: src/slic3r/GUI/PresetComboBoxes.cpp:1022
msgid "offline"
msgstr ""

#. TRN: this is part of the infoline below Printer Settings dropdown, informing about number of printers available/offline/printing in Prusa Connect.
#: src/slic3r/GUI/PresetComboBoxes.cpp:762
#: src/slic3r/GUI/PresetComboBoxes.cpp:1023
msgid "printing"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:872
#: src/slic3r/GUI/PresetComboBoxes.cpp:921
msgid "Add/Remove presets"
msgstr "添加/移除預設"

#: src/slic3r/GUI/PresetComboBoxes.cpp:877
#: src/slic3r/GUI/PresetComboBoxes.cpp:926 src/slic3r/GUI/Tab.cpp:3853
msgid "Add physical printer"
msgstr "添加打印機"

#: src/slic3r/GUI/PresetComboBoxes.cpp:889
msgid "Edit preset"
msgstr "編輯預設"

#: src/slic3r/GUI/PresetComboBoxes.cpp:895
msgid "Change extruder color"
msgstr "變更擠出機顏色"

#: src/slic3r/GUI/PresetComboBoxes.cpp:898
msgid "Show/Hide template presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:906 src/slic3r/GUI/Tab.cpp:3853
msgid "Edit physical printer"
msgstr "編輯打印機"

#: src/slic3r/GUI/PresetComboBoxes.cpp:912
msgid "Open the physical printer URL"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:917
msgid "Delete physical printer"
msgstr "刪除打印機"

#: src/slic3r/GUI/PresetComboBoxes.cpp:1206
#: src/slic3r/GUI/PresetComboBoxes.cpp:1489
msgid "Physical printers"
msgstr "打印機"

#: src/slic3r/GUI/PresetComboBoxes.cpp:1254
msgid "Add/Remove filaments"
msgstr "添加/移除線材"

#: src/slic3r/GUI/PresetComboBoxes.cpp:1256
msgid "Add/Remove materials"
msgstr "添加/移除材料"

#: src/slic3r/GUI/PresetComboBoxes.cpp:1258
#: src/slic3r/GUI/PresetComboBoxes.cpp:1529
msgid "Add/Remove printers"
msgstr "添加/移除打印機"

#: src/slic3r/GUI/PresetHints.cpp:37
#, boost-format
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""
"如果估計單層時間低於 ~%1%s 的話，則風扇將以 %2%%% 的速度執行，打印速度會降"
"低，因此該圖層上的耗時應不低於 %3%s(但速度永遠不會降到 %4%mm/s 以下)。"

#: src/slic3r/GUI/PresetHints.cpp:45
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""
"如果估計的單層時間更長，但仍低於 ~%1% 秒的話，則風扇將在 %2%%% 和 %3%%% 之間"
"以按比例降低的速度運作。"

#: src/slic3r/GUI/PresetHints.cpp:49
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at "
"%2%%%"
msgstr "如果估計單層時間更長，但仍低於 ~%1% 秒的話，風扇將以 %2%%% 運做"

#: src/slic3r/GUI/PresetHints.cpp:60
#, boost-format
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr "風扇速度將從層 %1% 的零增加到層 %3% 的 %2%%%。"

#: src/slic3r/GUI/PresetHints.cpp:62
#, boost-format
msgid "During the other layers, fan will always run at %1%%%"
msgstr "在其他層中，風扇將總是以 %1%%% 運作"

#: src/slic3r/GUI/PresetHints.cpp:62
#, boost-format
msgid "Fan will always run at %1%%%"
msgstr "風扇將總是以 %1%%% 運作"

#: src/slic3r/GUI/PresetHints.cpp:64
#, boost-format
msgid "except for the first %1% layers."
msgstr "除了前 %1% 層。"

#: src/slic3r/GUI/PresetHints.cpp:66
msgid "except for the first layer."
msgstr "除了第一層。"

#: src/slic3r/GUI/PresetHints.cpp:69
msgid "During the other layers, fan will be turned off."
msgstr "在其他層中，風扇將被關閉。"

#: src/slic3r/GUI/PresetHints.cpp:69
msgid "Fan will be turned off."
msgstr "風扇將被關閉。"

#: src/slic3r/GUI/PresetHints.cpp:175
msgid "external perimeters"
msgstr "外部邊緣"

#: src/slic3r/GUI/PresetHints.cpp:176
msgid "perimeters"
msgstr "邊緣"

#: src/slic3r/GUI/PresetHints.cpp:179
msgid "infill"
msgstr "填充"

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "solid infill"
msgstr "實心填充"

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "top solid infill"
msgstr "頂部實心填充"

#: src/slic3r/GUI/PresetHints.cpp:186
msgid "support"
msgstr "支撐"

#: src/slic3r/GUI/PresetHints.cpp:188
msgid "support interface"
msgstr "支撐介面"

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "First layer volumetric"
msgstr "第一層體積"

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "Bridging volumetric"
msgstr "橋接體積"

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "Volumetric"
msgstr "體積"

#: src/slic3r/GUI/PresetHints.cpp:193
msgid "flow rate is maximized"
msgstr "流量最大化"

#: src/slic3r/GUI/PresetHints.cpp:196
msgid "by the print profile maximum"
msgstr "按打印設定檔中所設定的最大值"

#: src/slic3r/GUI/PresetHints.cpp:197
msgid "when printing"
msgstr "打印時"

#: src/slic3r/GUI/PresetHints.cpp:198
msgid "with a volumetric rate"
msgstr "使用容積率"

#: src/slic3r/GUI/PresetHints.cpp:202
#, c-format, boost-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr "%3.2f mm³/s，線材速度 %3.2f mm/s。"

#: src/slic3r/GUI/PresetHints.cpp:220
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr "推薦的模型薄壁厚度：由於層高無效，不可用。"

#: src/slic3r/GUI/PresetHints.cpp:226
#, c-format, boost-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr "推薦模型薄壁厚度,用於打印層高度 %.2f 和"

#: src/slic3r/GUI/PresetHints.cpp:241
#, c-format, boost-format
msgid "%d lines: %.2f mm"
msgstr "%d 線: %.2f mm"

#: src/slic3r/GUI/PresetHints.cpp:245
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr "推薦的模型薄壁厚度：由於擠出寬度過小而無法提供。"

#: src/slic3r/GUI/PresetHints.cpp:274
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr "頂部/底部外殼厚度提示：由於層高無效，因此不可用。"

#: src/slic3r/GUI/PresetHints.cpp:287
#, boost-format
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr "對於層高 %2% mm，頂殼的厚度為 %1% mm。"

#: src/slic3r/GUI/PresetHints.cpp:290
#, boost-format
msgid "Minimum top shell thickness is %1% mm."
msgstr "最小頂殼厚度為 %1% mm。"

#: src/slic3r/GUI/PresetHints.cpp:293
msgid "Top is open."
msgstr "頂部是開放的。"

#: src/slic3r/GUI/PresetHints.cpp:306
#, boost-format
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr "對於層高 %2% mm，底殼厚度為 %1% mm。"

#: src/slic3r/GUI/PresetHints.cpp:309
#, boost-format
msgid "Minimum bottom shell thickness is %1% mm."
msgstr "最小底殼厚度為 %1% mm。"

#: src/slic3r/GUI/PresetHints.cpp:312
msgid "Bottom is open."
msgstr "底部是開放的。"

#: src/slic3r/GUI/PrintHostDialogs.cpp:47
msgid "Send G-Code to printer host"
msgstr "向打印機主機發送 G-code"

#: src/slic3r/GUI/PrintHostDialogs.cpp:47
msgid "Upload to Printer Host with the following filename:"
msgstr "使用以下檔案名稱上傳到打印機主機："

#: src/slic3r/GUI/PrintHostDialogs.cpp:60
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr "若必要時，使用正斜線(/)作為目錄分隔符號。"

#: src/slic3r/GUI/PrintHostDialogs.cpp:69
msgid "Group"
msgstr "群組"

#: src/slic3r/GUI/PrintHostDialogs.cpp:79
#: src/slic3r/GUI/PrintHostDialogs.cpp:88
msgid "Upload to storage"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:110
#, c-format, boost-format
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
msgstr "上傳檔案名稱不可以“%s”結尾。你想繼續嗎？"

#: src/slic3r/GUI/PrintHostDialogs.cpp:116
msgid "Upload"
msgstr "上傳"

#: src/slic3r/GUI/PrintHostDialogs.cpp:126
msgid "Upload to Queue"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:147
msgid "Upload and Simulate"
msgstr "上傳和模擬"

#: src/slic3r/GUI/PrintHostDialogs.cpp:302
msgid "ID"
msgstr "ID"

#: src/slic3r/GUI/PrintHostDialogs.cpp:303
msgid "Progress"
msgstr "進度"

#: src/slic3r/GUI/PrintHostDialogs.cpp:304
msgid "Status"
msgstr "狀態"

#: src/slic3r/GUI/PrintHostDialogs.cpp:305
msgid "Host"
msgstr "主機"

#: src/slic3r/GUI/PrintHostDialogs.cpp:306
msgctxt "OfFile"
msgid "Size"
msgstr "大小"

#: src/slic3r/GUI/PrintHostDialogs.cpp:307
msgid "Filename"
msgstr "檔案名稱"

#: src/slic3r/GUI/PrintHostDialogs.cpp:308
msgid "Message"
msgstr "訊息"

#: src/slic3r/GUI/PrintHostDialogs.cpp:312
msgid "Cancel selected"
msgstr "取消選擇"

#: src/slic3r/GUI/PrintHostDialogs.cpp:314
msgid "Show error message"
msgstr "顯示錯誤訊息"

#: src/slic3r/GUI/PrintHostDialogs.cpp:372
#: src/slic3r/GUI/PrintHostDialogs.cpp:427
msgid "Enqueued"
msgstr "排列"

#: src/slic3r/GUI/PrintHostDialogs.cpp:428
msgid "Uploading"
msgstr "上傳中"

#: src/slic3r/GUI/PrintHostDialogs.cpp:430
msgid "Cancelling"
msgstr "正在取消"

#: src/slic3r/GUI/PrintHostDialogs.cpp:431
msgid "Cancelled"
msgstr "已取消"

#: src/slic3r/GUI/PrintHostDialogs.cpp:432
msgid "Completed"
msgstr "已完成"

#: src/slic3r/GUI/PrintHostDialogs.cpp:482
msgid "Error uploading to print host"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:33
msgid "NO RAMMING AT ALL"
msgstr "完全沒有衝壓擠出"

#: src/slic3r/GUI/RammingChart.cpp:99
msgid "Volumetric speed"
msgstr "容積速度"

#: src/slic3r/GUI/SavePresetDialog.cpp:126
#: src/slic3r/GUI/SavePresetDialog.cpp:127
msgid "Save print settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:128
msgid "Save filament settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:129
msgid "Save material settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:130
msgid "Save printer settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:248
msgid "The following suffix is not allowed in the name"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:254
msgid "This name is reserved, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:260
msgid "This name is used for a system profile name, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:261
msgid "Cannot overwrite a system profile."
msgstr "無法覆蓋系統設定檔。"

#: src/slic3r/GUI/SavePresetDialog.cpp:267
msgid "This name is used for an external profile name, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:268
msgid "Cannot overwrite an external profile."
msgstr "無法覆蓋外部設定檔。"

#: src/slic3r/GUI/SavePresetDialog.cpp:278
msgid "Save preset modifications to existing user profile"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:283
#, boost-format
msgid "Preset with name \"%1%\" already exists."
msgstr "名稱為“%1%”的預設已存在。"

#: src/slic3r/GUI/SavePresetDialog.cpp:285
#, boost-format
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr "名稱為“%1%”的預設已存在並且與所選打印機不相容。"

#: src/slic3r/GUI/SavePresetDialog.cpp:286
msgid "Note: This preset will be replaced after renaming"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:287
msgid "Note: Preset modifications will be saved exactly into this preset"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:319
msgid "The name cannot be the same as a preset alias name."
msgstr "名稱不能與預設別名相同。"

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/SavePresetDialog.cpp:361 src/slic3r/GUI/Tab.cpp:198
msgid "Save preset"
msgstr "儲存預設"

#: src/slic3r/GUI/SavePresetDialog.cpp:361
msgid "Save presets"
msgstr ""

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/SavePresetDialog.cpp:369 src/slic3r/GUI/Tab.cpp:200
msgid "Rename preset"
msgstr ""

#. TRN Suffix for the preset name. Have to be a noun.
#: src/slic3r/GUI/SavePresetDialog.cpp:397
msgctxt "PresetName"
msgid "Copy"
msgstr "複製"

#: src/slic3r/GUI/SavePresetDialog.cpp:417
msgid "Save as profile derived from current printer only."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:477
#, boost-format
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""
"您選擇的實體打印機“%1%”\n"
"它有相關打印機預設“%2%”"

#: src/slic3r/GUI/SavePresetDialog.cpp:516
#, boost-format
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr "儲存後您想對“%1%”預設做什麼？"

#: src/slic3r/GUI/SavePresetDialog.cpp:519
#, boost-format
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr "將此打印機\"%3%\"的\"%1%\"變更為\"%2%\""

#: src/slic3r/GUI/SavePresetDialog.cpp:520
#, boost-format
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr "添加“%1%”作為實體打印機“%2%”的下一個預設"

#: src/slic3r/GUI/SavePresetDialog.cpp:521
#, boost-format
msgid "Just switch to \"%1%\" preset"
msgstr "只需切換到“%1%”預設"

#: src/slic3r/GUI/Search.cpp:104 src/slic3r/GUI/Search.cpp:389
#: src/slic3r/GUI/Tab.cpp:3144
msgid "Stealth"
msgstr "隱秘"

#: src/slic3r/GUI/Search.cpp:104 src/slic3r/GUI/Search.cpp:389
#: src/slic3r/GUI/Tab.cpp:3143
msgid "Normal"
msgstr "一般"

#. TRN: This is a label of a column of parameters in settings to be used when the area is above certain threshold.
#: src/slic3r/GUI/Search.cpp:106 src/slic3r/GUI/Tab.cpp:5525
msgid "Above"
msgstr ""

#. TRN: This is a label of a column of parameters in settings to be used when the area is below certain threshold.
#: src/slic3r/GUI/Search.cpp:106 src/slic3r/GUI/Tab.cpp:5522
msgid "Below"
msgstr ""

#: src/slic3r/GUI/Search.cpp:316
msgid "Enter a search term"
msgstr "請輸入搜尋字串"

#: src/slic3r/GUI/Selection.cpp:165
msgid "Selection-Add"
msgstr "選擇-添加"

#: src/slic3r/GUI/Selection.cpp:206
msgid "Selection-Remove"
msgstr "選擇-移除"

#: src/slic3r/GUI/Selection.cpp:238
msgid "Selection-Add Object"
msgstr "選擇-添加模型"

#: src/slic3r/GUI/Selection.cpp:257
msgid "Selection-Remove Object"
msgstr "選擇-移除模型"

#: src/slic3r/GUI/Selection.cpp:275
msgid "Selection-Add Instance"
msgstr "選擇-添加實例"

#: src/slic3r/GUI/Selection.cpp:294
msgid "Selection-Remove Instance"
msgstr "選擇-移除實例"

#: src/slic3r/GUI/Selection.cpp:391
msgid "Selection-Add All"
msgstr "選擇-全部添加"

#: src/slic3r/GUI/Selection.cpp:416
msgid "Selection-Remove All"
msgstr "選擇-全部移除"

#: src/slic3r/GUI/Selection.cpp:1158
msgid "Scale To Fit"
msgstr "縮放以適合"

#: src/slic3r/GUI/Selection.cpp:1502
msgid ""
"The currently manipulated object is tilted or contains tilted parts "
"(rotation angles are not multiples of 90°). Non-uniform scaling of tilted "
"objects is only possible in non-local coordinate systems, once the rotation "
"is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1505
msgid "This operation is irreversible."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:121
msgid "Data to send"
msgstr "要傳送的數據"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:561
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:628
msgid "Send system info"
msgstr "傳送系統資訊"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:591
#, boost-format
msgid ""
"This is the first time you are running %1%. We would like to ask you to send "
"some of your system information to us. This will only happen once and we "
"will not ask you to do this again (only after you upgrade to the next "
"version)."
msgstr ""
"這是您第一次運行 %1%。我們想請您將一些系統資訊傳送給我們參考。這件事只會發生"
"一次，我們不會要求您再次這樣做（僅在您升級到下一個版本後）。"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:595
msgid ""
"If we know your hardware, operating system, etc., it will greatly help us in "
"development and prioritization, because we will be able to focus our effort "
"more efficiently and spend time on features that are needed the most."
msgstr ""
"如果我們了解您的硬體、作業系統等，這將有助於幫助我們進行開發和確定優先級，因"
"為我們將能夠更有效地集中精力並將時間花在最需要的功能上。"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:598
msgid "Is it safe?"
msgstr "這是安全的嗎？"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:600
#, boost-format
msgid ""
"We do not send any personal information nor anything that would allow us to "
"identify you later. To detect duplicate entries, a unique number derived "
"from your system is sent, but the source information cannot be "
"reconstructed. Apart from that, only general data about your OS, hardware "
"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
"inspect the code actually performing the communication, see %1%."
msgstr ""
"我們不會對外發送與接收任何個人資訊，也不會發送和接收任何可以讓我們日後識別您"
"身份的資訊。為了檢測重複的條目，系統會發送一個從您系統產生的唯一編號，但這個"
"將無法重建來源資訊。除此之外，只會發送有關您的作業系統、硬體和 OpenGL 安裝的"
"一般資料。 PrusaSlicer 是開源的，如果您想檢查實際執行通信的編碼，請參閱 %1%。"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:624
msgid "Show verbatim data that will be sent"
msgstr "顯示將要發送的逐字資料"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:626
msgid "Ask me next time"
msgstr "下次再問我"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:627
msgid "Do not send anything"
msgstr "不要傳送任何東西"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:713
msgid "System info sent successfully. Thank you."
msgstr "系統資訊傳送成功。謝謝你。"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:716
msgid "Sending system info failed!"
msgstr "傳送系統資訊失敗！"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:723
msgid "Sending system info was cancelled."
msgstr "已取消系統資訊傳送。"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:730
msgid "Sending system info..."
msgstr "傳送系統資訊..."

#: src/slic3r/GUI/Sidebar.cpp:119
msgid ""
"For a multipart object, this value isn't accurate.\n"
"It doesn't take account of intersections and negative volumes."
msgstr ""
"對於多部分模型，此設定值不準確。\n"
"因為它不考慮交叉點和挖空模型。"

#: src/slic3r/GUI/Sidebar.cpp:123
msgid "Volume"
msgstr "體積"

#: src/slic3r/GUI/Sidebar.cpp:125
msgid "Facets"
msgstr "面"

#: src/slic3r/GUI/Sidebar.cpp:183
msgid "Sliced Info"
msgstr "切片資訊"

#: src/slic3r/GUI/Sidebar.cpp:203 src/slic3r/GUI/Sidebar.cpp:1037
msgid "Used Filament (g)"
msgstr "消耗線材(g)"

#: src/slic3r/GUI/Sidebar.cpp:204 src/slic3r/GUI/Sidebar.cpp:1018
msgid "Used Filament (m)"
msgstr "消耗線材(m)"

#: src/slic3r/GUI/Sidebar.cpp:205 src/slic3r/GUI/Sidebar.cpp:1030
msgid "Used Filament (mm³)"
msgstr "消耗線材(mm3)"

#: src/slic3r/GUI/Sidebar.cpp:206
msgid "Used Material (unit)"
msgstr "消耗材料(unit)"

#: src/slic3r/GUI/Sidebar.cpp:207
msgid "Cost (money)"
msgstr "費用（金額）"

#: src/slic3r/GUI/Sidebar.cpp:208 src/slic3r/GUI/Sidebar.cpp:1000
#: src/slic3r/GUI/Sidebar.cpp:1002 src/slic3r/GUI/Sidebar.cpp:1085
#: src/slic3r/GUI/Sidebar.cpp:1090
msgid "Estimated printing time"
msgstr "預計打印時間"

#: src/slic3r/GUI/Sidebar.cpp:209
msgid "Number of tool changes"
msgstr "工具切換次數"

#: src/slic3r/GUI/Sidebar.cpp:501
msgid "Send to Connect"
msgstr ""

#: src/slic3r/GUI/Sidebar.cpp:531
msgid "Export all to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/Sidebar.cpp:532
msgid "Export all G-codes"
msgstr ""

#: src/slic3r/GUI/Sidebar.cpp:784
msgid "Hold Shift to Slice & Export G-code"
msgstr "按住 Shift 鍵切片並匯出 G-code"

#: src/slic3r/GUI/Sidebar.cpp:941
#, boost-format
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] "%1%（%2$d 外殼）"

#: src/slic3r/GUI/Sidebar.cpp:969
msgid "Used Material (ml)"
msgstr "消耗材料 (ml)"

#: src/slic3r/GUI/Sidebar.cpp:972
msgid "object"
msgid_plural "objects"
msgstr[0] "模型"

#: src/slic3r/GUI/Sidebar.cpp:972
msgid "supports and pad"
msgstr "支撐和墊片"

#: src/slic3r/GUI/Sidebar.cpp:1018
msgid "Used Filament (in)"
msgstr "消耗線材 (in)"

#: src/slic3r/GUI/Sidebar.cpp:1020 src/slic3r/GUI/Sidebar.cpp:1071
msgid "objects"
msgstr "模型"

#: src/slic3r/GUI/Sidebar.cpp:1020 src/slic3r/GUI/Sidebar.cpp:1071
msgid "wipe tower"
msgstr "擦拭塔"

#: src/slic3r/GUI/Sidebar.cpp:1030
msgid "Used Filament (in³)"
msgstr "消耗線材 (in³)"

#: src/slic3r/GUI/Sidebar.cpp:1054
#, boost-format
msgid "Filament at extruder %1%"
msgstr "擠出機 %1% 的線材"

#: src/slic3r/GUI/Sidebar.cpp:1060
msgid "(including spool)"
msgstr "（包括線軸）"

#: src/slic3r/GUI/Sidebar.cpp:1087
msgid "normal mode"
msgstr "正常模式"

#: src/slic3r/GUI/Sidebar.cpp:1094
msgid "stealth mode"
msgstr "靜音模式"

#: src/slic3r/GUI/SurfaceDrag.cpp:98
msgid "Move over surface"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:98
msgid "System Information"
msgstr "系統資訊"

#: src/slic3r/GUI/SysInfoDialog.cpp:166
msgid "Blacklisted libraries loaded into PrusaSlicer process:"
msgstr "匯入到 PrusaSlicer 處理程式中的黑名單："

#: src/slic3r/GUI/SysInfoDialog.cpp:178
msgid "Eigen vectorization supported:"
msgstr "支援特徵向量化："

#: src/slic3r/GUI/SysInfoDialog.cpp:186
msgid "Copy to Clipboard"
msgstr "複製到剪貼簿"

#: src/slic3r/GUI/Tab.cpp:101
msgid "Select the printers this profile is compatible with."
msgstr "選擇與此設定檔相容的打印機。"

#: src/slic3r/GUI/Tab.cpp:107
msgid "Select the print profiles this profile is compatible with."
msgstr "選擇與此設定檔相容的打印設定檔。"

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/Tab.cpp:196
msgid "Compare preset with another"
msgstr ""

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/Tab.cpp:203
msgid "Delete preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:207
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"將游標懸停在按鈕上以查詢更多資訊\n"
"或單擊此按鈕。"

#: src/slic3r/GUI/Tab.cpp:1271
msgid "Detach from system preset"
msgstr "從系統預設中分離"

#: src/slic3r/GUI/Tab.cpp:1284
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr "將建立當前系統預設的副本，它將與系統預設分離。"

#: src/slic3r/GUI/Tab.cpp:1285
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr "當前的自定義預設將從父系統預設中分離出來。"

#: src/slic3r/GUI/Tab.cpp:1288
msgid "Modifications to the current profile will be saved."
msgstr "將儲存對當前設定檔的修改。"

#: src/slic3r/GUI/Tab.cpp:1294
msgid "Detach preset"
msgstr "分離預設"

#: src/slic3r/GUI/Tab.cpp:1320
msgid "This is a default preset."
msgstr "這是預設的設定。"

#: src/slic3r/GUI/Tab.cpp:1322
msgid "This is a system preset."
msgstr "這是系統預設。"

#: src/slic3r/GUI/Tab.cpp:1324
msgid "Current preset is inherited from the default preset."
msgstr "當前預設繼承自預設的設定。"

#: src/slic3r/GUI/Tab.cpp:1328
msgid "Current preset is inherited from"
msgstr "當前預設繼承自"

#: src/slic3r/GUI/Tab.cpp:1332
msgid "It can't be deleted or modified."
msgstr "它不能被刪除或修改。"

#: src/slic3r/GUI/Tab.cpp:1333
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr "任何修改都應儲存為繼承自該預設的新預設。"

#: src/slic3r/GUI/Tab.cpp:1334
msgid "To do that please specify a new name for the preset."
msgstr "因此，請為預設指定一個新名稱。"

#: src/slic3r/GUI/Tab.cpp:1338
msgid "Additional information:"
msgstr "附加資訊："

#: src/slic3r/GUI/Tab.cpp:1344
msgid "printer model"
msgstr "打印機型號"

#: src/slic3r/GUI/Tab.cpp:1352
msgid "default print profile"
msgstr "預設打印設定檔"

#: src/slic3r/GUI/Tab.cpp:1355
msgid "default filament profile"
msgstr "預設線材設定檔"

#: src/slic3r/GUI/Tab.cpp:1369
msgid "default SLA material profile"
msgstr "預設 SLA 材料設定檔"

#: src/slic3r/GUI/Tab.cpp:1373
msgid "default SLA print profile"
msgstr "預設 SLA 打印設定檔"

#: src/slic3r/GUI/Tab.cpp:1381
msgid "full profile name"
msgstr "完整設定檔名稱"

#: src/slic3r/GUI/Tab.cpp:1382
msgid "symbolic profile name"
msgstr "象徵性設定檔名稱"

#: src/slic3r/GUI/Tab.cpp:1420 src/slic3r/GUI/Tab.cpp:5939
msgid "Layers and perimeters"
msgstr "打印層和邊緣"

#: src/slic3r/GUI/Tab.cpp:1426
msgid "Vertical shells"
msgstr "垂直外殼"

#: src/slic3r/GUI/Tab.cpp:1438
msgid "Horizontal shells"
msgstr "水平外殼"

#: src/slic3r/GUI/Tab.cpp:1444
msgid "Minimum shell thickness"
msgstr "最小外殼厚度"

#: src/slic3r/GUI/Tab.cpp:1455
msgid "Quality (slower slicing)"
msgstr "品質（較慢的切片）"

#: src/slic3r/GUI/Tab.cpp:1484
msgid "Fuzzy skin (experimental)"
msgstr "模糊的表面（實驗性）"

#: src/slic3r/GUI/Tab.cpp:1490
msgid "Only one perimeter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1511
msgid "Reducing printing time"
msgstr "減少打印時間"

#: src/slic3r/GUI/Tab.cpp:1549
msgid "Raft"
msgstr "筏板"

#: src/slic3r/GUI/Tab.cpp:1554
msgid "Options for support material and raft"
msgstr "支撐材料和筏板的選擇"

#: src/slic3r/GUI/Tab.cpp:1573
msgid "Organic supports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1585
msgid "Speed for print moves"
msgstr "打印時移動速度"

#: src/slic3r/GUI/Tab.cpp:1599
msgid "Dynamic overhang speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1606
msgid "Speed for non-print moves"
msgstr "非打印時移動速度"

#: src/slic3r/GUI/Tab.cpp:1610
msgid "Modifiers"
msgstr "修改器"

#: src/slic3r/GUI/Tab.cpp:1615
msgid "Acceleration control (advanced)"
msgstr "加速控制（高級）"

#: src/slic3r/GUI/Tab.cpp:1628
msgid "Autospeed (advanced)"
msgstr "自動速度（高級）"

#: src/slic3r/GUI/Tab.cpp:1632
msgid "Pressure equalizer (experimental)"
msgstr "壓力均衡器（實驗性）"

#: src/slic3r/GUI/Tab.cpp:1636
msgid "Multiple Extruders"
msgstr "多個擠出機"

#: src/slic3r/GUI/Tab.cpp:1646
msgid "Ooze prevention"
msgstr "預防滲漏"

#: src/slic3r/GUI/Tab.cpp:1674
msgid "Extrusion width"
msgstr "擠出寬度"

#: src/slic3r/GUI/Tab.cpp:1685
msgid "Overlap"
msgstr "重疊"

#: src/slic3r/GUI/Tab.cpp:1688
msgid "Flow"
msgstr "流量"

#: src/slic3r/GUI/Tab.cpp:1700
msgid "Arachne perimeter generator"
msgstr "蜘蛛模式邊緣產生器"

#: src/slic3r/GUI/Tab.cpp:1708 src/slic3r/GUI/Tab.cpp:5987
msgid "Output options"
msgstr "輸出選項"

#: src/slic3r/GUI/Tab.cpp:1709
msgid "Sequential printing"
msgstr "順序打印"

#: src/slic3r/GUI/Tab.cpp:1717
msgid ""
"Note: When using this option, the Arrange function automatically accounts "
"for the printer geometry to prevent collisions. Extruder geometry is built-"
"in for most Prusa printers, the others use generic model defined by values "
"in Printer Settings."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1725 src/slic3r/GUI/Tab.cpp:5988
msgid "Output file"
msgstr "輸出檔案"

#: src/slic3r/GUI/Tab.cpp:1756 src/slic3r/GUI/Tab.cpp:1757
#: src/slic3r/GUI/Tab.cpp:2362 src/slic3r/GUI/Tab.cpp:2363
#: src/slic3r/GUI/Tab.cpp:2949 src/slic3r/GUI/Tab.cpp:2950
#: src/slic3r/GUI/Tab.cpp:3027 src/slic3r/GUI/Tab.cpp:3028
#: src/slic3r/GUI/Tab.cpp:4755 src/slic3r/GUI/Tab.cpp:5454
#: src/slic3r/GUI/Tab.cpp:5455
msgid "Notes"
msgstr "備註"

#: src/slic3r/GUI/Tab.cpp:1763 src/slic3r/GUI/Tab.cpp:2370
#: src/slic3r/GUI/Tab.cpp:2956 src/slic3r/GUI/Tab.cpp:3034
#: src/slic3r/GUI/Tab.cpp:5462 src/slic3r/GUI/Tab.cpp:5993
msgid "Dependencies"
msgstr "相關性"

#: src/slic3r/GUI/Tab.cpp:1764 src/slic3r/GUI/Tab.cpp:2371
#: src/slic3r/GUI/Tab.cpp:2957 src/slic3r/GUI/Tab.cpp:3035
#: src/slic3r/GUI/Tab.cpp:5463 src/slic3r/GUI/Tab.cpp:5994
msgid "Profile dependencies"
msgstr "設定檔相關項目"

#: src/slic3r/GUI/Tab.cpp:1796
msgid "Post processing scripts shall modify G-code file in place."
msgstr "後處理腳本應立刻修改 G-code檔案。"

#: src/slic3r/GUI/Tab.cpp:1875
#, c-format, boost-format
msgid ""
"The following line %s contains reserved keywords.\n"
"Please remove it, as it may cause problems in G-code visualization and "
"printing time estimation."
msgid_plural ""
"The following lines %s contain reserved keywords.\n"
"Please remove them, as they may cause problems in G-code visualization and "
"printing time estimation."
msgstr[0] ""
"下面的 %s 行包含保留關鍵字。\n"
"請刪除它，因為它可能會導致 G-code 可視化和預估打印時間方面出現問題。"

#: src/slic3r/GUI/Tab.cpp:1880
msgid "Found reserved keywords in"
msgstr "在其中找到保留關鍵字"

#: src/slic3r/GUI/Tab.cpp:2009
msgid "Filament Overrides"
msgstr "耗材覆蓋"

#: src/slic3r/GUI/Tab.cpp:2212
msgid "Nozzle"
msgstr "噴嘴"

#: src/slic3r/GUI/Tab.cpp:2217
msgid "Bed"
msgstr "載台"

#: src/slic3r/GUI/Tab.cpp:2222
msgid "Chamber"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2227
msgid "Cooling"
msgstr "冷卻"

#: src/slic3r/GUI/Tab.cpp:2240
msgid "Fan settings"
msgstr "風扇設定"

#: src/slic3r/GUI/Tab.cpp:2251
msgid "Dynamic fan speeds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2258
msgid "Cooling thresholds"
msgstr "冷卻閾值"

#: src/slic3r/GUI/Tab.cpp:2264
msgid "Filament properties"
msgstr "線材特性"

#: src/slic3r/GUI/Tab.cpp:2272
msgid "Print speed override"
msgstr "打印速度覆寫"

#: src/slic3r/GUI/Tab.cpp:2285
msgid "Shrinkage compensation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2289
msgid "Wipe tower parameters"
msgstr "擦拭塔參數"

#: src/slic3r/GUI/Tab.cpp:2292
msgid "Toolchange parameters with single extruder MM printers"
msgstr "單擠出機 MM 打印機的工具替換參數"

#: src/slic3r/GUI/Tab.cpp:2308
msgid "Ramming settings"
msgstr "衝壓擠出設定"

#: src/slic3r/GUI/Tab.cpp:2327
msgid "Toolchange parameters with multi extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2397
msgid "Volumetric flow hints not available"
msgstr "體積流量提示不可用"

#: src/slic3r/GUI/Tab.cpp:2615
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""
"注意：此組所有的參數都移動到實體打印機設定（參見變更日誌）。\n"
"\n"
"按一下打印機設定檔組合框的「cog」圖示右側，經由選擇打印機組合框中的「添加實體"
"打印機」項目建立新的實體打印機設定檔。按一下打印機設定選項卡中的「cog」圖示"
"時，實體打印機設定檔編輯器也會打開。實體打印機設定檔存儲到PrusaSlicer /"
"physical_printer目錄中。"

#: src/slic3r/GUI/Tab.cpp:2634
msgid ""
"Emitting machine limits to G-code is not supported with Klipper G-code "
"flavor.\n"
"The option was switched to \"Use for time estimate\"."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2655 src/slic3r/GUI/Tab.cpp:2969
msgid "Size and coordinates"
msgstr "尺寸和座標"

#: src/slic3r/GUI/Tab.cpp:2664 src/slic3r/GUI/UnsavedChangesDialog.cpp:1336
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1914
msgid "Capabilities"
msgstr "功能"

#: src/slic3r/GUI/Tab.cpp:2669
msgid "Number of extruders of the printer."
msgstr "打印機的擠出機數量。"

#: src/slic3r/GUI/Tab.cpp:2703
msgid ""
"This is a single extruder multimaterial printer, \n"
"all extruders must have the same nozzle diameter and 'High flow' state.\n"
"Do you want to change these values for all extruders to first extruder "
"values?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2706 src/slic3r/GUI/Tab.cpp:3245
msgid "Extruder settings do not match"
msgstr ""

#. TRN: First argument is parameter name, the second one is the value.
#: src/slic3r/GUI/Tab.cpp:2765
#, boost-format
msgid "Invalid value provided for parameter %1%: %2%"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2767 src/slic3r/GUI/Tab.cpp:2826
msgid "G-code flavor is switched"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2818
msgid ""
"The selected G-code flavor does not support the machine limitation for "
"Stealth mode.\n"
"Stealth mode will not be applied and will be disabled."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2843
msgid "Sequential printing limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2861
msgid "Start G-Code options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2976
msgid "Display"
msgstr "顯示"

#: src/slic3r/GUI/Tab.cpp:2991 src/slic3r/GUI/Tab.cpp:5489
msgid "Tilt"
msgstr "傾斜"

#: src/slic3r/GUI/Tab.cpp:2992
msgid "Tilt time"
msgstr "傾斜時間"

#: src/slic3r/GUI/Tab.cpp:2999 src/slic3r/GUI/Tab.cpp:5433
msgid "Corrections"
msgstr "更正"

#: src/slic3r/GUI/Tab.cpp:3012 src/slic3r/GUI/Tab.cpp:5429
msgid "Exposure"
msgstr "曝光"

#: src/slic3r/GUI/Tab.cpp:3019
msgid "Output"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3143
msgid "Values in this column are for Normal mode"
msgstr "此列中的值適用於正常模式"

#: src/slic3r/GUI/Tab.cpp:3144
msgid "Values in this column are for Stealth mode"
msgstr "這裡的數值用於「靜音」模式"

#: src/slic3r/GUI/Tab.cpp:3151
msgid "Maximum feedrates"
msgstr "最大進給率"

#: src/slic3r/GUI/Tab.cpp:3156
msgid "Maximum accelerations"
msgstr "最大加速度"

#: src/slic3r/GUI/Tab.cpp:3165
msgid "Jerk limits"
msgstr "抖動速度限制"

#: src/slic3r/GUI/Tab.cpp:3171
msgid "Minimum feedrates"
msgstr "最小進給率"

#: src/slic3r/GUI/Tab.cpp:3214
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""
"這是一台單擠出機多材料打印機，所有擠出機的直徑都將設定為新值。你想繼續嗎？"

#: src/slic3r/GUI/Tab.cpp:3243
msgid ""
"This is a single extruder multimaterial printer, 'high_flow' state of all "
"extruders will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3281
msgid "Reset to Filament Color"
msgstr "重置耗材線的顏色"

#: src/slic3r/GUI/Tab.cpp:3317
msgid "Apply below setting to other extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3362
msgid "Layer height limits"
msgstr "層高限制"

#: src/slic3r/GUI/Tab.cpp:3366
msgid "Position (for multi-extruder printers)"
msgstr "位置（用於多擠出機打印機）"

#: src/slic3r/GUI/Tab.cpp:3369
msgid "Travel lift"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3376
msgid "Only lift"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3391
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr "禁用工具時的回抽（多擠出機的高級設定）"

#: src/slic3r/GUI/Tab.cpp:3448 src/slic3r/GUI/Tab.cpp:3457
msgid "Single extruder MM setup"
msgstr "單擠出機 MM 設定"

#: src/slic3r/GUI/Tab.cpp:3458
msgid "Single extruder multimaterial parameters"
msgstr "單擠出機多材料參數"

#: src/slic3r/GUI/Tab.cpp:3632
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"使用韌體回抽模式時，回擦選項不可用。\n"
"\n"
"我應該禁用它以啟用韌體回抽嗎？"

#: src/slic3r/GUI/Tab.cpp:3634
msgid "Firmware Retraction"
msgstr "韌體回抽"

#: src/slic3r/GUI/Tab.cpp:3925
msgid "New printer preset selected"
msgstr "選擇了新的打印機預設"

#: src/slic3r/GUI/Tab.cpp:4309
msgid "Detached"
msgstr "分離的"

#: src/slic3r/GUI/Tab.cpp:4405
msgid ""
"The physical printer below is based on the preset, you are going to rename."
msgid_plural ""
"The physical printers below are based on the preset, you are going to rename."
msgstr[0] ""

#: src/slic3r/GUI/Tab.cpp:4410
msgid "Note, that the selected preset will be renamed in this printer too."
msgid_plural ""
"Note, that the selected preset will be renamed in these printers too."
msgstr[0] ""

#: src/slic3r/GUI/Tab.cpp:4487
msgid "remove"
msgstr "移除"

#: src/slic3r/GUI/Tab.cpp:4487
msgid "delete"
msgstr "刪除"

#: src/slic3r/GUI/Tab.cpp:4495
msgid "It's a last preset for this physical printer."
msgstr "這是此打印機的最後預設。"

#: src/slic3r/GUI/Tab.cpp:4503
#, boost-format
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr "您確定要從實體打印機“%2%”中刪除“%1%”預設嗎？"

#: src/slic3r/GUI/Tab.cpp:4515
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] "下面的實體打印機是根據預設的，你要刪除。"

#: src/slic3r/GUI/Tab.cpp:4520
msgid "Note, that the selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that the selected preset will be deleted from these printers too."
msgstr[0] "請注意，所選預設也將從該打印機中刪除。"

#: src/slic3r/GUI/Tab.cpp:4525
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] "下面的實體打印機只是基於預設的，你要刪除。"

#: src/slic3r/GUI/Tab.cpp:4530
msgid ""
"Note, that this printer will be deleted after deleting the selected preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting the selected preset."
msgstr[0] "請注意，刪除所選預設後，此打印機將被刪除。"

#. TRN "remove/delete"
#: src/slic3r/GUI/Tab.cpp:4536
#, boost-format
msgid "Are you sure you want to %1% the selected preset?"
msgstr "您確定要%1%選定的預設嗎？"

#. TRN Settings Tabs: Button in toolbar: "Remove/Delete"
#: src/slic3r/GUI/Tab.cpp:4541
#, boost-format
msgid "%1% Preset"
msgstr "%1% 預設"

#: src/slic3r/GUI/Tab.cpp:4631 src/slic3r/GUI/Tab.cpp:5018
msgid "Set"
msgstr "設定"

#: src/slic3r/GUI/Tab.cpp:4753
msgid "Find"
msgstr "搜尋"

#: src/slic3r/GUI/Tab.cpp:4754
msgid "Replace with"
msgstr "取代為"

#: src/slic3r/GUI/Tab.cpp:4841
msgid "Regular expression"
msgstr "規則運算式"

#: src/slic3r/GUI/Tab.cpp:4845
msgid "Case insensitive"
msgstr "不區分大小寫"

#: src/slic3r/GUI/Tab.cpp:4849
msgid "Whole word"
msgstr "整個詞"

#: src/slic3r/GUI/Tab.cpp:4853
msgid "Match single line"
msgstr "符合單行"

#: src/slic3r/GUI/Tab.cpp:4979
msgid "Are you sure you want to delete all substitutions?"
msgstr "您確定要刪除所有替換嗎？"

#: src/slic3r/GUI/Tab.cpp:5129
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr "機器限制將傳送到 G-code 並用於估計打印時間。"

#: src/slic3r/GUI/Tab.cpp:5132
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""
"機器限制不會傳送到 G-code ，但它們將用於估計打印時間，不過也許不準確，因為打"
"印機可能會應用一組不同的機器限制。"

#: src/slic3r/GUI/Tab.cpp:5136
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr "未設定機器限制，因此打印時間估計可能不準確。"

#: src/slic3r/GUI/Tab.cpp:5158
msgid "LOCKED LOCK"
msgstr "鎖定"

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:5160
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr "指示設定與當前選項組的系統（或預設）值相同"

#: src/slic3r/GUI/Tab.cpp:5162
msgid "UNLOCKED LOCK"
msgstr "解除鎖定"

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:5164
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""
"表示某些設定已變更並且不等於當前選項組的系統（或預設）值。\n"
"單擊 UNLOCKED LOCK 圖示可將當前選項組的所有設定重置為系統（或預設）值。"

#: src/slic3r/GUI/Tab.cpp:5169
msgid "WHITE BULLET"
msgstr "白色項目符號"

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:5171
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""
"對於左按鈕：表示非系統（或非預設）預設，\n"
"右側按鈕：表示設定未修改。"

#: src/slic3r/GUI/Tab.cpp:5174
msgid "BACK ARROW"
msgstr "後退箭頭"

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:5176
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"表示設定已變更且不等於當前選項組最後儲存的預設。\n"
"單擊後退箭頭圖示可將當前選項組的所有設定重置為上次儲存的預設。"

#: src/slic3r/GUI/Tab.cpp:5181
msgid "EDIT VALUE"
msgstr ""

#. TRN Description for "EDIT VALUE" in the Help dialog (the icon is currently used only to edit custom gcodes).
#: src/slic3r/GUI/Tab.cpp:5183
msgid "clicking this icon opens a dialog allowing to edit this value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5190
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr "解除鎖定圖示表示設定與當前選項組的系統（或預設）值相同"

#: src/slic3r/GUI/Tab.cpp:5192
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""
"解除鎖定圖示表示某些設定已變更且不等於當前選項組的系統（或預設）值。\n"
"單擊可將當前選項組的所有設定重置為系統（或預設）值。"

#: src/slic3r/GUI/Tab.cpp:5195
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr "白色項目符號圖示表示非系統（或非預設）預設。"

#: src/slic3r/GUI/Tab.cpp:5198
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr "白色圓點圖示表示設定與當前選項組上次儲存的預設相同。"

#: src/slic3r/GUI/Tab.cpp:5200
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"後退箭頭圖示表示設定已變更且不等於當前選項組最後儲存的預設。\n"
"單擊可將當前選項組的所有設定重置為上次儲存的預設。"

#: src/slic3r/GUI/Tab.cpp:5206
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr "鎖定圖示表示該值與系統（或預設）值相同。"

#: src/slic3r/GUI/Tab.cpp:5207
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""
"解除鎖定圖示表示該值已變更且不等於系統（或預設）值。\n"
"單擊可將當前值重置為系統（或預設）值。"

#: src/slic3r/GUI/Tab.cpp:5213
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr "白色圓點圖示表示該值與上次儲存的預設值相同。"

#: src/slic3r/GUI/Tab.cpp:5214
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"後退箭頭圖示表示該值已變更且不等於上次儲存的預設值。\n"
"單擊可將當前值重置為上次儲存的預設。"

#: src/slic3r/GUI/Tab.cpp:5385 src/slic3r/GUI/Tab.cpp:5387
msgid "Material"
msgstr "材料"

#: src/slic3r/GUI/Tab.cpp:5483 src/slic3r/GUI/Tab.cpp:5486
#: src/slic3r/GUI/Tab.cpp:5493
msgid "Material printing profile"
msgstr "材質打印設定檔"

#: src/slic3r/GUI/Tab.cpp:5523
msgid ""
"Values in this column are applied when layer area is smaller than area_fill."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5526
msgid ""
"Values in this column are applied when layer area is larger than area_fill."
msgstr ""

#. TRN: 'Profile' in this context denotes a group of parameters used to configure
#. layer separation procedure for SLA printers.
#: src/slic3r/GUI/Tab.cpp:5551
msgid "Profile settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5569
msgid "Set default values for fast print speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5570
msgid "Set default values for slow print speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5571
msgid "Set default values for high viscosity print speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5666
#, boost-format
msgid "The current Z-axis height correction is: %1% mm"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5756
msgid "Support head"
msgstr "支撐頭"

#: src/slic3r/GUI/Tab.cpp:5761
msgid "Support pillar"
msgstr "支撐柱"

#: src/slic3r/GUI/Tab.cpp:5784
msgid "Connection of the support sticks and junctions"
msgstr "支撐桿和連接點的連接"

#: src/slic3r/GUI/Tab.cpp:5810 src/slic3r/GUI/Tab.cpp:5952
msgid "Branching"
msgstr ""

#. TRN: Page title in Material Settings in SLA mode.
#: src/slic3r/GUI/Tab.cpp:5867
msgid "Material Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5954
msgid "Automatic generation"
msgstr "自動產生"

#: src/slic3r/GUI/Tab.cpp:6021
#, boost-format
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""
"“%1%”被禁用，因為“%2%”在“%3%”類別中已打開。\n"
"要啟用“%1%”，請關閉“%2%”"

#: src/slic3r/GUI/Tab.hpp:443 src/slic3r/GUI/Tab.hpp:607
msgid "Print Settings"
msgstr "打印設定"

#: src/slic3r/GUI/Tab.hpp:538
msgid "Printers"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:581
msgid "Materials"
msgstr ""

#: src/slic3r/GUI/TopBar.cpp:214 src/slic3r/GUI/TopBar.cpp:461
#: src/slic3r/GUI/TopBarMenus.cpp:101
msgid "Log in"
msgstr ""

#: src/slic3r/GUI/TopBar.cpp:274
#, boost-format
msgid "Search in settings [%1%]"
msgstr "在設定 [%1%] 中搜尋"

#: src/slic3r/GUI/TopBarMenus.cpp:33
msgid "Beginner mode"
msgstr ""

#: src/slic3r/GUI/TopBarMenus.cpp:89
msgid "Hide \"Log in\" button"
msgstr ""

#: src/slic3r/GUI/TopBarMenus.cpp:101
msgid "Log out"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:150
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:159
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:168
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1135
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1150
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1165
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1180
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1225
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1231
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
msgid "Undef"
msgstr "未定義"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:823
msgid "Unsaved Changes"
msgstr "未儲存的變更"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:841
msgid "Switching Presets: Unsaved Changes"
msgstr "切換預設：未儲存的變更"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:885
msgid "Original value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:886
msgid "Modified value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:888
msgid "New value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:919
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:922
msgid "Keep"
msgstr "保留"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:919
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1622
msgid "Transfer"
msgstr "轉移"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:926
msgid "Don't save"
msgstr "不要儲存"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:954
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"create new project"
msgstr "下次建立新項目時，不會詢問您預設中未儲存的變更"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:955
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"switch a preset"
msgstr "下次切換預設時，不會詢問您預設中未儲存的變更"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:956
msgid ""
"You will not be asked about the unsaved changes in presets the next time "
"you: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""
"下次您不會詢問有關預設中未儲存變更的資訊：\n"
"- 在修改某些預設時關閉 PrusaSlicer，\n"
"- 在修改某些預設時匯入新項目"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:959
msgid "PrusaSlicer will remember your action."
msgstr "PrusaSlicer 會記住你的行動。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:960
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""
"進入“選項”並選中“%1%”\n"
"再次詢問未儲存的變更。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:992
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1832
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr "有些字段太長不適合。單擊鼠標右鍵顯示全文。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:994
msgid "All settings changes will not be saved"
msgstr "不會儲存所有設定的變更"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:994
msgid "All settings changes will be discarded."
msgstr "所有設定變更都將被丟棄。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:997
msgid "Save the selected options."
msgstr "儲存選擇的選項。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:998
msgid "Keep the selected settings."
msgstr "保留所選設定。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:999
msgid "Transfer the selected settings to the newly selected preset."
msgstr "將所選設定傳輸到新選擇的預設。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1003
#, boost-format
msgid "Save the selected options to preset \"%1%\"."
msgstr "將所選選項儲存到預設“%1%”。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1004
#, boost-format
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr "將所選選項傳輸到新選擇的預設“%1%”。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1271
msgid "The following preset was modified"
msgid_plural "The following presets were modified"
msgstr[0] "修改了以下預設"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1277
#, boost-format
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr "預設“%1%”具有以下未儲存的變更："

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr "預設“%1%”與新的打印機設定檔不相容，它有以下未儲存的變更："

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1282
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr "預設“%1%”與新的打印設定檔不相容，它有以下未儲存的變更："

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1331
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1910
msgid "Extruders count"
msgstr "擠出機數量"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1375
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] "預設值已修改並完成儲存"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1566
msgid "Show all presets (including incompatible)"
msgstr "顯示所有預設（包括不相容的）"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1585
msgid "Select presets to compare"
msgstr "選擇要比較的預設"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1598
msgid "Left Preset Value"
msgstr "左預設值"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1599
msgid "Right Preset Value"
msgstr "右預設值"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1648
msgid ""
"Transfer the selected options from left preset to the right.\n"
"Note: New modified presets will be selected in settings tabs after close "
"this dialog."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1656
msgid "Save the selected options from left preset to the right."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1674
msgid "Transfer values from left to right"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1675
msgid ""
"If checked, this dialog can be used for transferring selected values from "
"the preset on the left to the preset on the right."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1867
msgid "One of the presets doesn't found"
msgstr "找不到其中一個預設"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1878
msgid "Compared presets has different printer technology"
msgstr "比較預設具有不同的打印機技術"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1892
msgid "Presets are the same"
msgstr "預設是一樣的"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1900
msgid ""
"Presets are different.\n"
"Click this button to select the same preset for the right and left preset."
msgstr ""
"預設不同。\n"
"單擊此按鈕可為左右預設選擇相同的預設。"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1925
msgid "Undef category"
msgstr "未定義類別"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1925
msgid "Undef group"
msgstr "未定義群組"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2078
msgid "Modified"
msgstr "修改日期"

#: src/slic3r/GUI/UpdateDialogs.cpp:46
msgid "Update available"
msgstr "有可用的更新"

#: src/slic3r/GUI/UpdateDialogs.cpp:46
#, c-format, boost-format
msgid "New version of %s is available"
msgstr "有新的發行版本 %s 可用"

#: src/slic3r/GUI/UpdateDialogs.cpp:51 src/slic3r/GUI/UpdateDialogs.cpp:106
msgid "Current version:"
msgstr "當前版本："

#: src/slic3r/GUI/UpdateDialogs.cpp:53 src/slic3r/GUI/UpdateDialogs.cpp:108
msgid "New version:"
msgstr "新版本："

#: src/slic3r/GUI/UpdateDialogs.cpp:61
msgid "Changelog & Download"
msgstr "更新日誌與下載"

#: src/slic3r/GUI/UpdateDialogs.cpp:68 src/slic3r/GUI/UpdateDialogs.cpp:327
#: src/slic3r/GUI/UpdateDialogs.cpp:399
msgid "Open changelog page"
msgstr "打開更新日誌頁面"

#: src/slic3r/GUI/UpdateDialogs.cpp:74
msgid "Open download page"
msgstr "打開下載頁面"

#: src/slic3r/GUI/UpdateDialogs.cpp:81 src/slic3r/GUI/UpdateDialogs.cpp:114
msgid "Don't notify about new releases any more"
msgstr "不再通知新版本"

#: src/slic3r/GUI/UpdateDialogs.cpp:103
msgid "App Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:103
#, c-format, boost-format
msgid ""
"New version of %s is available.\n"
"Do you wish to download it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:121
msgid ""
"Clicking 'Next' will open a browser window where you can select which "
"variant of PrusaSlicer you want to download."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:149
msgid "App Update download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:149
#, boost-format
msgid "New version of %1% is available."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:152
msgid "New version"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:157
msgid "Run installer after download. (Otherwise file explorer will be opened)"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:162
msgid "Target directory"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:169 src/slic3r/GUI/UpdateDialogs.cpp:187
msgid "Select directory"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:215
msgid "Directory path is empty."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:223
msgid "Directory path is incorrect."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:228
#, boost-format
msgid "Directory %1% doesn't exists. Do you wish to create it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:233
msgid "Failed to create directory."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:245
#, boost-format
msgid "Download path is %1%. Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:281 src/slic3r/GUI/UpdateDialogs.cpp:469
msgid "Configuration update"
msgstr "設定更新"

#: src/slic3r/GUI/UpdateDialogs.cpp:282
msgid ""
"PrusaSlicer is not using the newest configuration available.\n"
"Configuration Wizard may not offer the latest printers, filaments and SLA "
"materials to be installed."
msgstr ""
"PrusaSlicer 沒有可用的最新設定。\n"
"設定嚮導可能不提供要安裝的最新打印機、線材和 SLA 材料。"

#: src/slic3r/GUI/UpdateDialogs.cpp:284
msgid "Configuration update is available"
msgstr "有設定更新可用"

#: src/slic3r/GUI/UpdateDialogs.cpp:287
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"您想安裝它嗎？\n"
"\n"
"請注意，將首先建立一個完整的設定快照。如果新版本出現問題，可以隨時恢復它。\n"
"\n"
"更新的設定包："

#: src/slic3r/GUI/UpdateDialogs.cpp:308 src/slic3r/GUI/UpdateDialogs.cpp:382
msgid "Comment:"
msgstr "註解:"

#: src/slic3r/GUI/UpdateDialogs.cpp:315 src/slic3r/GUI/UpdateDialogs.cpp:389
msgid "New printer"
msgid_plural "New printers"
msgstr[0] ""

#: src/slic3r/GUI/UpdateDialogs.cpp:337
msgid "Install"
msgstr "安裝"

#: src/slic3r/GUI/UpdateDialogs.cpp:338
msgid "Don't install"
msgstr "不要安裝"

#: src/slic3r/GUI/UpdateDialogs.cpp:342
msgid "Yes"
msgstr "是"

#: src/slic3r/GUI/UpdateDialogs.cpp:343
msgid "No"
msgstr "否"

#: src/slic3r/GUI/UpdateDialogs.cpp:358 src/slic3r/GUI/UpdateDialogs.cpp:420
#, c-format, boost-format
msgid "%s incompatibility"
msgstr "%s 不相容"

#: src/slic3r/GUI/UpdateDialogs.cpp:358
msgid "You must install a configuration update."
msgstr "設定更新。"

#: src/slic3r/GUI/UpdateDialogs.cpp:361
#, c-format, boost-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"%s 現在將開始更新。否則將無法啟動。\n"
"\n"
"請注意，將首先建立一個完整的設定快照。如果新版本出現問題，可以隨時恢復它。\n"
"\n"
"更新的設定包："

#: src/slic3r/GUI/UpdateDialogs.cpp:421
#, c-format, boost-format
msgid "%s configuration is incompatible"
msgstr "%s 設定不相容"

#: src/slic3r/GUI/UpdateDialogs.cpp:424
#, c-format, boost-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""
"此版本的 %s 與當前安裝的設定包不相容。\n"
"這可能是由於在使用較新的%s 後運行了較舊的版本造成的。\n"
"\n"
"您可以退出 %s 並使用較新的版本重試, 也可以重新運行初始設定。這樣做將在安裝與"
"此%s 相容的檔案之前建立現有設定的備份快照。"

#: src/slic3r/GUI/UpdateDialogs.cpp:433
#, c-format, boost-format
msgid "This %s version: %s"
msgstr "此 %s 版本：%s"

#: src/slic3r/GUI/UpdateDialogs.cpp:438
msgid "Incompatible bundles:"
msgstr "不相容的設定包："

#: src/slic3r/GUI/UpdateDialogs.cpp:454
msgid "Re-configure"
msgstr "重新設定"

#: src/slic3r/GUI/UpdateDialogs.cpp:472
#, c-format, boost-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"%s 現在使用更新的設定結構。\n"
"\n"
"引入了所謂的“系統預設”，其中包含各種打印機的內建預設設定。這些系統預設無法修"
"改，相反的，使用者現在可以建立自己的預設，繼承其中一個系統預設的設定。\n"
"繼承預設可以從其父級繼承特定值或使用自定義值覆蓋它。\n"
"\n"
"請繼續執行隨後的 %s 以設定新預設並選擇是否啟用自動預設更新。"

#: src/slic3r/GUI/UpdateDialogs.cpp:487
msgid "For more information please visit our wiki page:"
msgstr "有關更多資訊，請參考我們的維基頁面："

#. TRN %s = PrusaSlicer
#: src/slic3r/GUI/UpdateDialogs.cpp:491
#, c-format, boost-format
msgid "%s 1.40 configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:505
msgid "Configuration updates"
msgstr "設定更新"

#: src/slic3r/GUI/UpdateDialogs.cpp:505 src/slic3r/GUI/UpdateDialogs.cpp:525
msgid "No updates available"
msgstr "沒有可用的更新"

#: src/slic3r/GUI/UpdateDialogs.cpp:510
#, c-format, boost-format
msgid "%s has no configuration updates available."
msgstr "%s 沒有可用的設定更新。"

#: src/slic3r/GUI/UpdateDialogs.cpp:525
msgid "App update"
msgstr ""

#. TRN %1% is PrusaSlicer
#: src/slic3r/GUI/UpdateDialogs.cpp:528
#, boost-format
msgid "Your %1% is up to date."
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:30
msgid "Online sources"
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:35
msgid "Please, select online sources you want to update profiles from"
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:49
msgid "Local sources"
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:68
#, boost-format
msgid ""
"As an alternative to online sources, profiles can also be updated by "
"manually loading files containing the updates. This is mostly useful on "
"computers that are not connected to the internet. Files containing the "
"configuration updates can be downloaded from <a href=%1%>our website</a>."
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:143
#: src/slic3r/GUI/UpdatesUIManager.cpp:198
msgid "Description"
msgstr ""

#. TRN tooltip in Configuration Wizard - Configuration Sources
#: src/slic3r/GUI/UpdatesUIManager.cpp:169
msgid ""
"Some vendors were installed from this source, but you do not have the rights "
"to receive updates from it.\n"
"This source may no longer be active, or your account may no longer be "
"subscribed.\n"
"Please consider unsubscribing from this source."
msgstr ""

#. TRN tooltip in Configuration Wizard - Configuration Sources
#: src/slic3r/GUI/UpdatesUIManager.cpp:174
msgid ""
"Some vendors were installed from this source, but you do not have rights to "
"receive updates from it.\n"
"Please log in to restore access to all your subscribed sources or consider "
"unsubscribing from this source."
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:198
msgid "Source file"
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:225
msgid "File exists"
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:225
msgid "File does NOT exist"
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:237
msgid "Open folder"
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:292
msgid "Choose one or more ZIP files"
msgstr ""

#: src/slic3r/GUI/UpdatesUIManager.cpp:357
msgid "Manage Updates"
msgstr ""

#: src/slic3r/GUI/WebViewDialog.cpp:78
msgid "Failed to load a web browser."
msgstr ""

#: src/slic3r/GUI/WebViewDialog.cpp:458 src/slic3r/GUI/WebViewDialog.cpp:643
msgid "Choose a printer"
msgstr ""

#: src/slic3r/GUI/WebViewDialog.cpp:698
msgid "Log in dialog"
msgstr ""

#. TRN: This is the dialog title.
#: src/slic3r/GUI/WifiConfigDialog.cpp:28
msgid "Wi-Fi Configuration File Generator"
msgstr ""

#. TRN Error dialog of configuration -> wifi configuration file
#: src/slic3r/GUI/WifiConfigDialog.cpp:36
msgid "Failed to scan wireless networks. Please fill SSID manually."
msgstr ""

#. TRN Windows specific second line of error dialog of configuration -> wifi configuration file
#: src/slic3r/GUI/WifiConfigDialog.cpp:39
msgid "Library wlanapi.dll was not loaded."
msgstr ""

#. TRN Wifi config dialog explanation line 2.
#: src/slic3r/GUI/WifiConfigDialog.cpp:53
#, boost-format
msgid "Write this file on the USB flash drive. Its name will be %1%."
msgstr ""

#. TRN Wifi config dialog explanation line 3.
#: src/slic3r/GUI/WifiConfigDialog.cpp:55
msgid "Your Prusa printer should load this file automatically."
msgstr ""

#. TRN Wifi config dialog explanation line 4.
#: src/slic3r/GUI/WifiConfigDialog.cpp:57
msgid "Note: This file will contain the SSID and password in plain text."
msgstr ""

#. TRN SSID of WiFi network. It is a standard abbreviation which should probably not change in most languages.
#: src/slic3r/GUI/WifiConfigDialog.cpp:61
msgid "SSID"
msgstr ""

#: src/slic3r/GUI/WifiConfigDialog.cpp:64
msgid "On some versions of MacOS, this only loads SSID of connected network."
msgstr ""

#. TRN Text of button to retrieve password from keychain in Wifi Config dialog. Only on Mac.
#: src/slic3r/GUI/WifiConfigDialog.cpp:81
msgid "Retrieve"
msgstr ""

#. TRN description of Combo Box with path to USB drive.
#: src/slic3r/GUI/WifiConfigDialog.cpp:92
msgid "Drive"
msgstr ""

#. TRN Text of button to write config file in Wifi Config dialog.
#: src/slic3r/GUI/WifiConfigDialog.cpp:102
msgid "Write"
msgstr ""

#. TRN Alert message when retrieving password for wifi from keychain. Probably will display only on Apple so keychain is MacOS term.
#: src/slic3r/GUI/WifiConfigDialog.cpp:169
msgid "No password in the keychain for given SSID."
msgstr ""

#. TRN Alert message when writing WiFi configuration file to usb drive.
#: src/slic3r/GUI/WifiConfigDialog.cpp:229
msgid "SSID field is empty."
msgstr ""

#. TRN Alert message when writing WiFi configuration file to usb drive.
#: src/slic3r/GUI/WifiConfigDialog.cpp:238
msgid "Drive field is empty."
msgstr ""

#. TRN Alert message when writing WiFi configuration file to usb drive.
#: src/slic3r/GUI/WifiConfigDialog.cpp:248
msgid "Selected path is not on removable media."
msgstr ""

#. TRN placeholder %1% is path to file
#: src/slic3r/GUI/WifiConfigDialog.cpp:255
#, boost-format
msgid ""
"%1% already exists. Do you want to rewrite it?\n"
"(Other items than Wi-Fi credentials will stay unchanged)"
msgstr ""

#: src/slic3r/GUI/WifiConfigDialog.cpp:302
msgid "Failed to open file for writing."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:30
msgid "Ramming customization"
msgstr "衝壓擠出自定義"

#: src/slic3r/GUI/WipeTowerDialog.cpp:66
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"衝壓擠出表示在單擠出機 MM 打印機中替換工具之前的快速擠出。其目的是正確塑造未"
"加載線材的末端，這樣它就不會妨礙新線材的插入，並且可以在以後重新插入。這個階"
"段很重要，不同的材料可能需要不同的擠壓速度才能獲得良好的形狀。因此，衝壓擠出"
"過程中的擠壓率是可調的。\n"
"\n"
"這是一個專家級的設定，不正確的調整可能會導致卡線、被擠出機齒輪磨成細線等。"

#: src/slic3r/GUI/WipeTowerDialog.cpp:125
msgid "Total ramming time"
msgstr "總衝壓擠出時間"

#: src/slic3r/GUI/WipeTowerDialog.cpp:127
msgid "Total rammed volume"
msgstr "總衝壓擠出量"

#: src/slic3r/GUI/WipeTowerDialog.cpp:131
msgid "Ramming line width"
msgstr "衝壓擠出線寬"

#: src/slic3r/GUI/WipeTowerDialog.cpp:133
msgid "Ramming line spacing"
msgstr "衝壓擠出線間距"

#. TRN: The placeholder expands to Ctrl or Cmd (on macOS).
#: src/slic3r/GUI/WipeTowerDialog.cpp:142
#, boost-format
msgid "For constant flow rate, hold %1% while dragging."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:194
msgid "Wipe tower - Purging volume adjustment"
msgstr "擦拭塔 - 清洗量調整"

#: src/slic3r/GUI/WipeTowerDialog.cpp:198
msgid "Set values from configuration"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:202
msgid "Use values from configuration"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:203
msgid "Use custom project-specific settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:214
msgid ""
"The project uses single-extruder multimaterial printer with the wipe tower.\n"
"The volume of material used for purging can be configured here."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:215
msgid ""
"Options 'multimaterial_purging' and 'filament_purge_multiplier' will be used."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:229
msgid "(all values in mm³)"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:362
msgid "Extruder changed to"
msgstr "擠出機改為"

#: src/slic3r/GUI/WipeTowerDialog.cpp:374
msgid "From"
msgstr "從"

#: src/slic3r/Utils/AppUpdater.cpp:48
#, boost-format
msgid ""
"Running downloaded instaler of %1% has failed:\n"
"%2%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:213
#, boost-format
msgid "Internal download error for url %1%:"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:214
msgid "Destination path is empty."
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:230
#, boost-format
msgid "Download from %1% couldn't start:"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:278
#, boost-format
msgid "Downloaded file has wrong size. Expected size: %1% Downloaded size: %2%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:293
#, boost-format
msgid ""
"Failed to write to file or to move %1% to %2%:\n"
"%3%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:312
#, boost-format
msgid ""
"Downloading new %1% has failed:\n"
"%2%"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:76 src/slic3r/Utils/OctoPrint.cpp:219
#: src/slic3r/Utils/OctoPrint.cpp:268 src/slic3r/Utils/OctoPrint.cpp:673
#: src/slic3r/Utils/OctoPrint.cpp:836 src/slic3r/Utils/OctoPrint.cpp:917
#: src/slic3r/Utils/Repetier.cpp:92
#, c-format, boost-format
msgid "Mismatched type of print host: %s"
msgstr "打印主機類型不符：%s"

#: src/slic3r/Utils/AstroBox.cpp:91
msgid "Connection to AstroBox works correctly."
msgstr "與 AstroBox 的連接工作正常。"

#: src/slic3r/Utils/AstroBox.cpp:97
msgid "Could not connect to AstroBox"
msgstr "無法連接到 AstroBox"

#: src/slic3r/Utils/AstroBox.cpp:99
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr "注意：AstroBox 版本至少需要 1.1.0。"

#: src/slic3r/Utils/Duet.cpp:73
msgid "Connection to Duet works correctly."
msgstr "與 Duet 的連接工作正常。"

#: src/slic3r/Utils/Duet.cpp:78
msgid "Could not connect to Duet"
msgstr "無法連接到 Duet"

#: src/slic3r/Utils/Duet.cpp:114 src/slic3r/Utils/Duet.cpp:196
#: src/slic3r/Utils/FlashAir.cpp:129 src/slic3r/Utils/FlashAir.cpp:150
#: src/slic3r/Utils/FlashAir.cpp:166 src/slic3r/Utils/MKS.cpp:89
msgid "Unknown error occured"
msgstr "發生未知的錯誤"

#: src/slic3r/Utils/Duet.cpp:175
msgid "Failed to parse a Connect reply"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:190
msgid "Wrong password"
msgstr "密碼錯誤"

#: src/slic3r/Utils/Duet.cpp:193
msgid "Could not get resources to create a new connection"
msgstr "無法取得建立新連結的資源"

#: src/slic3r/Utils/FixModelByWin10.cpp:226
#: src/slic3r/Utils/FixModelByWin10.cpp:366
msgid "Exporting source model"
msgstr "匯出來源模型"

#: src/slic3r/Utils/FixModelByWin10.cpp:249
msgid "Repairing model by Windows repair algorithm"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:258
#: src/slic3r/Utils/FixModelByWin10.cpp:393
msgid "Loading repaired model"
msgstr "匯入修復的模型"

#: src/slic3r/Utils/FixModelByWin10.cpp:418
msgid "Model repair finished"
msgstr "模型修復完成"

#: src/slic3r/Utils/FixModelByWin10.cpp:424
msgid "Model repair canceled"
msgstr "模型修復已取消"

#: src/slic3r/Utils/FlashAir.cpp:65
msgid "Upload not enabled on FlashAir card."
msgstr "FlashAir 卡上未啟用上傳。"

#: src/slic3r/Utils/FlashAir.cpp:75
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr "與 FlashAir 的連接工作正常並啟用上傳。"

#: src/slic3r/Utils/FlashAir.cpp:81
msgid "Could not connect to FlashAir"
msgstr "無法連接到 FlashAir"

#: src/slic3r/Utils/FlashAir.cpp:83
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr "注意：FlashAir 需要韌體為 2.00.02 或更新版本並啟動上傳功能。"

#: src/slic3r/Utils/Http.cpp:81
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr "無法檢測系統 SSL 憑證儲存。PrusaSlicer 將無法建立安全的網路連結。"

#: src/slic3r/Utils/Http.cpp:86
#, boost-format
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr "PrusaSlicer 檢測系統 SSL 憑證儲存在： %1%"

#: src/slic3r/Utils/Http.cpp:90
#, boost-format
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""
"要手動指定系統證書存儲，請將 %1% 環境變數設定為正確的 CA 捆綁包並重新啟動應用"
"程序。"

#: src/slic3r/Utils/Http.cpp:99
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""
"CURL 已經失敗了。PrusaSlicer 將無法建立網路連結。有關其他詳細資訊，請參閱日"
"誌。"

#: src/slic3r/Utils/MKS.cpp:61
msgid "Connection to MKS works correctly."
msgstr ""

#: src/slic3r/Utils/MKS.cpp:66
msgid "Could not connect to MKS"
msgstr ""

#: src/slic3r/Utils/Moonraker.cpp:82
msgid "Connection to Moonraker works correctly."
msgstr ""

#: src/slic3r/Utils/Moonraker.cpp:88
msgid "Could not connect to Moonraker"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:291
msgid "Connection to OctoPrint works correctly."
msgstr "與 OctoPrint 的連接工作正常。"

#: src/slic3r/Utils/OctoPrint.cpp:297
msgid "Could not connect to OctoPrint"
msgstr "無法連接到 OctoPrint"

#: src/slic3r/Utils/OctoPrint.cpp:299
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "注意：OctoPrint 版本至少需要 1.1.0。"

#: src/slic3r/Utils/OctoPrint.cpp:555
msgid "Connection to Prusa SL1 / SL1S works correctly."
msgstr "與 Prusa SL1 / SL1S 的連接工作正常。"

#: src/slic3r/Utils/OctoPrint.cpp:560
msgid "Could not connect to Prusa SLA"
msgstr "無法連接到 Prusa SLA"

#: src/slic3r/Utils/OctoPrint.cpp:582
msgid "Connection to PrusaLink works correctly."
msgstr "與 PrusaLink 的連接工作正常。"

#: src/slic3r/Utils/OctoPrint.cpp:587
msgid "Could not connect to PrusaLink"
msgstr "無法連接到 PrusaLink"

#: src/slic3r/Utils/OctoPrint.cpp:783 src/slic3r/Utils/PrusaConnect.cpp:285
msgid "Storages found"
msgstr ""

#. TRN %1% = storage path
#: src/slic3r/Utils/OctoPrint.cpp:787 src/slic3r/Utils/PrusaConnect.cpp:289
#, boost-format
msgid "%1% : read only"
msgstr ""

#. TRN %1% = storage path
#: src/slic3r/Utils/OctoPrint.cpp:789 src/slic3r/Utils/PrusaConnect.cpp:291
#, boost-format
msgid "%1% : no free space"
msgstr ""

#. TRN %1% = host
#: src/slic3r/Utils/OctoPrint.cpp:793
#, boost-format
msgid "Upload has failed. There is no suitable storage found at %1%."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:1177
msgid "Connection to Prusa Connect works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:1182
msgid "Could not connect to Prusa Connect"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:69
#, boost-format
msgid "Copying of file %1% to %2% failed: %3%"
msgstr "將檔案 %1% 複製到 %2% 失敗：%3%"

#: src/slic3r/Utils/PresetUpdater.cpp:950
#: src/slic3r/Utils/PresetUpdater.cpp:967
msgid "Continue and install configuration updates?"
msgstr "繼續並安裝設定更新？"

#: src/slic3r/Utils/PresetUpdater.cpp:973
msgid "Installing profiles"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1023
#, boost-format
msgid "Downloading resources for %1%."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1086
msgid ""
"Configuration Update will cause the preset modification to be lost.\n"
"So, check unsaved changes and save them if necessary."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1088
msgid "Updating"
msgstr "正在更新請稍候"

#: src/slic3r/Utils/PresetUpdater.cpp:1117
#, c-format, boost-format
msgid "requires min. %s and max. %s"
msgstr "需要最小 %s。最大 %s"

#: src/slic3r/Utils/PresetUpdater.cpp:1121
#, c-format, boost-format
msgid "requires min. %s"
msgstr "需要最小 %s"

#: src/slic3r/Utils/PresetUpdater.cpp:1124
#, c-format, boost-format
msgid "requires max. %s"
msgstr "需要需要最大 %s"

#: src/slic3r/Utils/PresetUpdater.cpp:1273
#, boost-format
msgid ""
"Couldn't locate index file for vendor %1% when performing updates. The "
"profile will not be installed."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1283
#, boost-format
msgid ""
"Couldn't load index file for vendor %1% when performing updates. The profile "
"will not be installed. Reason: Corrupted index file %2%."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1321
#, boost-format
msgid ""
"Couldn't open profile file for vendor %1% when performing updates. The "
"profile will not be installed. This installation might be corrupted."
msgstr ""

#: src/slic3r/Utils/Process.cpp:168
msgid "Open G-code file:"
msgstr "打開 G-code檔案："

#. TRN %1% = host
#: src/slic3r/Utils/PrusaConnect.cpp:295
#, boost-format
msgid "Upload has failed. There is no suitable storage found at %1%. "
msgstr ""

#: src/slic3r/Utils/PrusaConnect.cpp:305
msgid "Test passed."
msgstr ""

#: src/slic3r/Utils/PrusaConnect.cpp:309
msgid "Test failed."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:107
msgid "Connection to Repetier works correctly."
msgstr "與 Repetier 的連接工作正常。"

#: src/slic3r/Utils/Repetier.cpp:113
msgid "Could not connect to Repetier"
msgstr "無法連接到 Repetier"

#: src/slic3r/Utils/Repetier.cpp:115
msgid "Note: Repetier version at least 0.90.0 is required."
msgstr "注意：Repetier 版本至少需要 0.90.0。"

#: src/slic3r/Utils/Repetier.cpp:267
#, boost-format
msgid ""
"HTTP status: %1%\n"
"Message body: \"%2%\""
msgstr ""
"HTTP 狀態：%1%\n"
"訊息內容：“%2%”"

#: src/slic3r/Utils/Repetier.cpp:274
#, boost-format
msgid ""
"Parsing of host response failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""
"主機溝通解析失敗。\n"
"訊息內容：“%1%”\n"
"錯誤碼：“%2%”"

#: src/slic3r/Utils/Repetier.cpp:287
#, boost-format
msgid ""
"Enumeration of host printers failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""
"主機打印機例舉失敗。\n"
"訊息內容：“%1%”\n"
"錯誤碼：“%2%”"

#. TRN Dialog text, %1% is list of vendors.
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:51
#, boost-format
msgid ""
"Update check failed for the following vendors:\n"
"\n"
"%1%\n"
"This may be because you are no longer subscribed to some configuration "
"sources.\n"
"Please manage your configuration sources in Configuration Wizard"
msgstr ""

#. TRN Dialog text, %1% is list of vendors.
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:56
#, boost-format
msgid ""
"Update check failed for the following vendors:\n"
"\n"
"%1%\n"
"Please log in to restore access to all your subscribed configuration sources."
msgstr ""

#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:120
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:195
#, boost-format
msgid "Failed to download %1%"
msgstr ""

#. TRN: Headline of Progress dialog
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:155
msgid "Checking for Configuration Updates"
msgstr ""

#. TRN: %1% contains paths from which loading failed. They are separated by \n, there is no \n at the end.
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:208
#, boost-format
msgid ""
"It was not possible to extract data from %1%. The source will not be updated."
msgid_plural ""
"It was not possible to extract data for following local sources. They will "
"not be updated.\n"
"\n"
" %1%"
msgstr[0] ""

#. TRN: Text of progress dialog. %1% is a name of file.
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:322
#, boost-format
msgid "Downloading Resources: %1%"
msgstr ""

#. TRN: Text of progress dialog. %1% is a name of file. %2% is a number of attept.
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:325
#, boost-format
msgid "Downloading Resources: %1%. Attempt %2%."
msgstr ""

#. TRN: Text of progress dialog.
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:348
#: src/slic3r/Utils/PresetUpdaterWrapper.cpp:374
msgid "Initializing"
msgstr ""

#: resources/data/hints.ini: [hint:Fuzzy skin]
msgid ""
"Fuzzy skin\n"
"Did you know that you can create rough fibre-like texture on the sides of "
"your models using the<a>Fuzzy skin</a>feature? You can also use modifiers to "
"apply fuzzy-skin only to a portion of your model."
msgstr ""
"模糊表面\n"
"您是否知道可以使用<a>模糊表面</a>功能在模型的側面建立粗糙的纖維狀紋理？您還可"
"以使用修改器將模糊表面僅應用在模型的一部分。"

#: resources/data/hints.ini: [hint:Shapes gallery]
msgid ""
"Shapes gallery\n"
"Did you know that PrusaSlicer has a Shapes Gallery? You can use the included "
"models as modifiers, negative volumes or as printable objects. Right-click "
"the platter and select<a>Add Shape - Gallery</a>."
msgstr ""
"形狀庫圖\n"
"您知道 PrusaSlicer 有一個形狀圖庫嗎？您可以使用其中所包含的模型作為修改器、挖"
"空模型或直接當作打印模型。右鍵單擊花紋並選取<a>添加形狀 - 圖庫</a>。"

#: resources/data/hints.ini: [hint:Arrange settings]
msgid ""
"Arrange settings\n"
"Did you know that you can right-click the<a>Arrange icon</a>to adjust the "
"size of the gap between objects and to allow automatic rotations?"
msgstr ""
"排列設定\n"
"您是否知道您可以右鍵單擊<a>排列圖形</a>來調整模型之間的間隙大小並允許自動旋"
"轉？"

#: resources/data/hints.ini: [hint:Negative volume]
msgid ""
"Negative volume\n"
"Did you know that you can subtract one mesh from another using the Negative "
"volume modifier? That way you can, for example, create easily resizable "
"holes directly in PrusaSlicer. Read more in the documentation. (Requires "
"Advanced or Expert mode.)"
msgstr ""
"挖空模型\n"
"您是否知道可以使用挖空模型修改器從一個網格中減去另一個網格？例如，這樣您就可"
"以直接在 PrusaSlicer 中建立易於調整大小的孔。在說明檔中可閱讀到更多內容。 "
"（此功能需要高級或專家模式。）"

#: resources/data/hints.ini: [hint:Simplify mesh]
msgid ""
"Simplify mesh\n"
"Did you know that you can reduce the number of triangles in a mesh using the "
"Simplify mesh feature? Right-click the model and select Simplify model. Read "
"more in the documentation."
msgstr ""
"簡化網格\n"
"您是否知道可以使用“簡化網格”功能減少網格中的三角形數量？右鍵單擊模型並選擇簡"
"化模型。在說明檔中可閱讀更多內容。"

#: resources/data/hints.ini: [hint:Reload from disk]
msgid ""
"Reload from disk\n"
"Did you know that if you created a newer version of your model, you can "
"simply reload it in PrusaSlicer? Right-click the model in the 3D view and "
"choose Reload from disk. Read more in the documentation."
msgstr ""
"從磁碟機重新匯入\n"
"您知道嗎，如果您建立了模型的更新版本，您可以很簡單的在 PrusaSlicer 中重新匯入"
"它？在 3D 檢視裡面按滑鼠右鍵單擊模型並選擇從磁碟機重新匯入。在說明檔中可閱讀"
"更多資訊。"

#: resources/data/hints.ini: [hint:Hiding sidebar]
msgid ""
"Hiding sidebar\n"
"Did you know that you can hide the right sidebar using the shortcut <b>Shift"
"+Tab</b>? You can also enable the icon for this from the<a>Preferences</a>."
msgstr ""
"隱藏側邊欄\n"
"您知道可以使用快捷鍵<b>Shift+Tab</b>隱藏右側邊欄嗎？您還可以從<a>選項</a>為此"
"功能啟用圖示。"

#: resources/data/hints.ini: [hint:Perspective camera]
msgid ""
"Perspective camera\n"
"Did you know that you can use the <b>K</b> key to quickly switch between an "
"orthographic and perspective camera?"
msgstr ""
"透視相機\n"
"您是否知道可以使用<b>K</b>鍵在正交相機和透視相機之間快速切換？"

#: resources/data/hints.ini: [hint:Camera Views]
msgid ""
"Camera Views\n"
"Did you know that you can use the number keys <b>0-6</b> to quickly switch "
"between predefined camera angles?"
msgstr ""
"攝影機檢視\n"
"您是否知道可以使用數字鍵<b>0-6</b>在預定義的攝影機不同角度之間快速切換？"

#: resources/data/hints.ini: [hint:Place on face]
msgid ""
"Place on face\n"
"Did you know that you can quickly orient a model so that one of its faces "
"sits on the print bed? Select the<a>Place on face</a>function or press the "
"<b>F</b> key."
msgstr ""
"平貼在載台\n"
"您是否知道可以快速調整模型的方向，使其其中一個面放置於載台上？選擇<a>平貼在載"
"台</a>功能或按<b>F</b>鍵。"

#: resources/data/hints.ini: [hint:Set number of instances]
msgid ""
"Set number of instances\n"
"Did you know that you can right-click a model and set an exact number of "
"instances instead of copy-pasting it several times?"
msgstr ""
"設定實例數\n"
"您知道嗎，您可以右鍵單擊模型並設定準確的實例數量來打印，而不是使用多次的復製"
"貼上？"

#: resources/data/hints.ini: [hint:Combine infill]
msgid ""
"Combine infill\n"
"Did you know that you can print the infill with a higher layer height "
"compared to perimeters to save print time using the setting<a>Combine infill "
"every</a>."
msgstr ""
"組合填充\n"
"您知道嗎，您可以打印具有比邊緣更高的層高之填充，您可以使用設定<a>組合填充間隔"
"</a>來節省打印時間。"

#: resources/data/hints.ini: [hint:Variable layer height]
msgid ""
"Variable layer height\n"
"Did you know that you can print different regions of your model with a "
"different layer height and smooth the transitions between them? Try "
"the<a>Variable layer height tool</a>. (Not available for SLA printers.)"
msgstr ""
"可變層高\n"
"您是否知道可以使用不同的層高來打印模型的不同區域並平滑它們之間的過渡？試試<a>"
"可變層高工具</a>。 （不適用於 SLA 打印機。）"

#: resources/data/hints.ini: [hint:Undo/redo history]
msgid ""
"Undo/redo history\n"
"Did you know that you can right-click the<a>undo/redo arrows</a>to see the "
"history of changes and to undo or redo several actions at once?"
msgstr ""
"取消/重做歷史\n"
"您是否知道您可以右鍵單擊<a>取消/重做歷史</a>來查看更改的歷史並一次取消或重做"
"多個操作？"

#: resources/data/hints.ini: [hint:Different layer height for each model]
msgid ""
"Different layer height for each model\n"
"Did you know that you can print each model on the plater with a different "
"layer height? Right-click the model in the 3D view, choose Layers and "
"Perimeters and adjust the values in the right panel. Read more in the "
"documentation."
msgstr ""
"每個模型不同的層高\n"
"您知道您可以在載台上以不同的層高打印每個模型嗎？在 3D 視圖中右鍵單擊模型，選"
"擇打印層和邊緣並在右側面板中調整設定值。在說明檔中可閱讀更多內容。"

#: resources/data/hints.ini: [hint:Solid infill threshold area]
msgid ""
"Solid infill threshold area\n"
"Did you know that you can make parts of your model with a small cross-"
"section be filled with solid infill automatically? Set the<a>Solid infill "
"threshold area</a>. (Expert mode only.)"
msgstr ""
"實體填充上限區域\n"
"您是否知道可以使模型的小橫截面部分自動填充實體填充？您可以設定<a>實體填充上限"
"區域</a>。 （僅限專家模式。）"

#: resources/data/hints.ini: [hint:Search functionality]
msgid ""
"Search functionality\n"
"Did you know that you use the<a>Search</a>tool to quickly find a specific "
"PrusaSlicer setting? Or use the familiar shortcut <b>Ctrl+F</b>."
msgstr ""
"搜尋功能\n"
"您知道您可以使用<a>搜尋</a>工具快速找到特定的 PrusaSlicer 設定嗎？或者您也可"
"以使用比較熟悉的快捷方式<b>Ctrl+F</b> 。"

#: resources/data/hints.ini: [hint:Box selection]
msgid ""
"Box selection\n"
"Did you know that you can do a box selection with Shift+Mouse drag? You can "
"also box-deselect objects with <b>Alt+Mouse drag</b>."
msgstr ""
"框選\n"
"您知道可以使用 Shift+滑鼠的拖動來進行模型的框選嗎？您還可以使用<b>Alt+滑鼠拖"
"動</b>來取消框選模型。"

#: resources/data/hints.ini: [hint:Zoom on selected objects or all if none
#: selected]
msgid ""
"Zoom on selected objects or on all objects if none selected\n"
"Did you know that you can zoom in on selected objects by pressing the <b>Z</"
"b> key? If none are selected, the camera will zoom on all objects in the "
"scene."
msgstr ""
"放大選取模型或所有模型\n"
"您是否知道可以通過按<b>Z</b>鍵放大選取模型？如果沒有選取，相機將放大場景中的"
"所有模型。"

#: resources/data/hints.ini: [hint:Printable toggle]
msgid ""
"Printable toggle\n"
"Did you know that you can disable the G-code generation for the selected "
"model without having to move or delete it? Toggle the Printable property of "
"a model from the Right-click context menu."
msgstr ""
"可打印切換\n"
"您是否知道您可以禁用所選模型 G-code 的產生而不需移動或刪除它？選取模型後按滑"
"鼠右鍵選單中的可打印項目。"

#: resources/data/hints.ini: [hint:Mirror]
msgid ""
"Mirror\n"
"Did you know that you can mirror the selected model to create a reversed "
"version of it? Right-click the model, select Mirror and pick the mirror axis."
msgstr ""
"鏡像\n"
"您知道您可以鏡像所選模型以建立它的反向版本嗎？請右鍵單擊模型叫出右鍵選單，選"
"取鏡像的選項然再選取您要的鏡像軸。"

#: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45
#: degrees]
msgid ""
"PageUp / PageDown quick rotation by 45 degrees\n"
"Did you know that you can quickly rotate selected models by 45 degrees "
"around the Z-axis clockwise or counter-clockwise by pressing <b>Page Up</b> "
"or <b>Page Down</b> respectively?"
msgstr ""
"按 PageUp/PageDown 快速旋轉 45 度\n"
"您知道嗎，您可以通過分別按<b>Page Up</b>或<b>Page Down</b>快速將所選模型繞 Z "
"軸順時針或逆時針旋轉 45 度？"

#: resources/data/hints.ini: [hint:Load config from G-code]
msgid ""
"Load config from G-code\n"
"Did you know that you can use File-Import-Import Config to load print, "
"filament and printer profiles from an existing G-code file? Similarly, you "
"can use File-Import-Import SL1 / SL1S archive, which also lets you "
"reconstruct 3D models from the voxel data."
msgstr ""
"從 G-code 匯入設定\n"
"您是否知道可以使用檔案-匯入-匯入設定從現有 G-code 檔案匯入打印、線材和打印機"
"設定檔？同樣的您也可以使用 File-Import-Import SL1 / SL1S 存檔，這能讓您從體素"
"資料重建 3D 模型。"

#: resources/data/hints.ini: [hint:Ironing]
msgid ""
"Ironing\n"
"Did you know that you can smooth top surfaces of prints using Ironing? The "
"nozzle will run a special second infill phase at the same layer to fill in "
"holes and flatten any lifted plastic. Read more in the documentation. "
"(Requires Advanced or Expert mode.)"
msgstr ""
"熨平模式\n"
"您知道嗎，您可以使用熨平功能來平滑打印件的頂面？此功能使用時噴嘴將在同一層執"
"行特殊的第二次填充過程，以填充孔洞並壓平任何抬起的塑料。在說明檔中可閱讀更多"
"內容。 （需要高級或專家模式。）"

#: resources/data/hints.ini: [hint:Paint-on supports]
msgid ""
"Paint-on supports\n"
"Did you know that you can paint directly on the object and select areas, "
"where supports should be enforced or blocked? Try the<a>Paint-on supports</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""
"繪製支撐\n"
"您是否知道可以直接在模型上繪製並選取需要強制或阻止支稱的區域？請試試<a>繪製支"
"撐</a>的功能。 （需要高級或專家模式。）"

#: resources/data/hints.ini: [hint:Paint-on seam]
msgid ""
"Paint-on seam\n"
"Did you know that you can paint directly on the object and select where to "
"place the start/endpoint of each perimeter loop? Try the<a>Seam painting</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""
"在接縫上繪製\n"
"您知道可以直接在模型上繪製並選擇放置每個邊緣環的起點/終點的位置嗎？請試試<a>"
"接縫繪製</a>功能。 （需要高級或專家模式。）"

#: resources/data/hints.ini: [hint:Insert Pause]
msgid ""
"Insert Pause\n"
"Did you know that you can schedule the print to pause at a specific layer? "
"Right-click the layer slider in the Preview and select Add pause print "
"(M601). This can be used to insert magnets, weights or nuts into your "
"prints. Read more in the documentation."
msgstr ""
"插入暫停\n"
"您知道您可以安排打印件在特定層時暫停嗎？右鍵單擊預覽中的打印層滑塊，然後選擇"
"添加暫停打印 (M601)。這可用於將磁鐵、加重物或螺母插入打印件中。在說明檔中可閱"
"讀更多內容。"

#: resources/data/hints.ini: [hint:Insert Custom G-code]
msgid ""
"Insert Custom G-code\n"
"Did you know that you can insert a custom G-code at a specific layer? Left-"
"click the layer in the Preview, Right-click the plus icon and select Add "
"custom G-code. With this function you can, for example, create a temperature "
"tower. Read more in the documentation."
msgstr ""
"插入自定義 G-code\n"
"您知道可以在特定層插入自定義 G-code嗎？左鍵單擊預覽中的打印層，右鍵單擊加號圖"
"示並選取添加自定義 G-code。例如，您可以使用此功能建立一個冷卻塔。在說明檔中可"
"閱讀更多內容。"

#: resources/data/hints.ini: [hint:Configuration snapshots]
msgid ""
"Configuration snapshots\n"
"Did you know that you can roll back to a complete backup of all system and "
"user profiles? You can view and move back and forth between snapshots using "
"the Configuration - <a>Configuration snapshots menu</a>."
msgstr ""
"設定快照\n"
"您是否知道可以返回到所有系統和使用者設定檔的完整備份？您可以使用 設定- <a>設"
"定檔快照選單</a>查看快照並在快照之間來回切換。"

#: resources/data/hints.ini: [hint:Minimum shell thickness]
msgid ""
"Minimum shell thickness\n"
"Did you know that instead of the number of top and bottom layers, you can "
"define the<a>Minimum shell thickness</a>in millimeters? This feature is "
"especially useful when using the variable layer height function."
msgstr ""
"最小殼厚度\n"
"您知道嗎，您可以定義以mm為單位的<a>最小殼厚度</a>，而不是頂層和底層的數量？此"
"功能在使用可變層高功能時特別有用。"

#: resources/data/hints.ini: [hint:Settings in non-modal window]
msgid ""
"Settings in non-modal window\n"
"Did you know that you can open the Settings in a new non-modal window? This "
"means you can have settings open on one screen and the G-code Preview on the "
"other. Go to the<a>Preferences</a>and select Settings in non-modal window."
msgstr ""
"非模態視窗中的設定\n"
"您知道可以在新的非態式視窗中打開設定嗎？這表示您可以在一個螢幕上打開設定，而"
"在另一個螢幕上打開 G-code預覽。轉到<a>選項</a>並選取非模態視窗中的設定。"

#: resources/data/hints.ini: [hint:Adaptive infills]
msgid ""
"Adaptive infills\n"
"Did you know that you can use the Adaptive cubic and Support cubic infills "
"to decrease the print time and lower the filament consumption? Read more in "
"the documentation."
msgstr ""
"自適應填充\n"
"您知道嗎，您可以使用自適應立方體和支撐立方體的填充來縮短打印時間並降低線材的"
"消耗量？在說明檔中可閱讀更多內容。"

#: resources/data/hints.ini: [hint:Lightning infill]
msgid ""
"Lightning infill\n"
"Did you know that you can use the Lightning infill to support only the top "
"surfaces, save a lot of the filament, and decrease the print time? Read more "
"in the documentation."
msgstr ""
"閃電填充\n"
"您知道嗎，您可以使用閃電填充來打印以支撐頂面，從而節省大量耗材並縮短打印時"
"間？在說明檔中可閱讀更多內容。"

#: resources/data/hints.ini: [hint:Fullscreen mode]
msgid ""
"Fullscreen mode\n"
"Did you know that you can switch PrusaSlicer to fullscreen mode? Use the "
"<b>F11</b> hotkey."
msgstr ""
"全螢幕模式 你知道你可以將 PrusaSlicer 切換到全螢幕模式嗎？使用<b>F11</b>熱"
"鍵。"

#: resources/data/hints.ini: [hint:Printables integration]
msgid ""
"Printables.com integration\n"
"Did you know that when you are browsing Printables.com, you can send 3D "
"model files to PrusaSlicer with a single click? Learn more in the "
"documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Cut tool]
msgid ""
"Cut tool\n"
"Did you know that you can cut a model at any angle and even create aligning "
"pins with the updated <a>Cut tool</a>? Learn more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Measurement tool]
msgid ""
"Measurement tool\n"
"Did you know that you can <a>measure</a> the distances between points, edges "
"and planes, the radius of a hole or the angle between edges or planes? Learn "
"more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Text tool]
msgid ""
"Text tool\n"
"Did you know that you can add custom text labels to your models or even use "
"the text as a modifier? Learn more in the documentation."
msgstr ""

#: ../src/common/debugrpt.cpp:590
msgid ""
"\n"
"Please send this report to the program maintainer, thank you!\n"
msgstr ""
"\n"
"請將報告傳送給程式維護人員，謝謝！\n"

#: ../src/richtext/richtextstyledlg.cpp:210
#: ../src/richtext/richtextstyledlg.cpp:222
msgid " "
msgstr " "

#: ../src/generic/dbgrptg.cpp:329
msgid "              Thank you and we're sorry for the inconvenience!\n"
msgstr "              謝謝，我們對您遇到的不便表示抱歉！\n"

#: ../src/common/prntbase.cpp:573
#, c-format
msgid " (copy %d of %d)"
msgstr " (複製 %d / %d )"

#: ../src/common/log.cpp:421
#, c-format
msgid " (error %ld: %s)"
msgstr " (錯誤 %ld: %s)"

#: ../src/common/imagtiff.cpp:72
#, c-format
msgid " (in module \"%s\")"
msgstr "(在「%s」模組)"

#: ../src/common/docview.cpp:1639
msgid " - "
msgstr " - "

#: ../src/html/htmprint.cpp:715 ../src/richtext/richtextprint.cpp:592
msgid " Preview"
msgstr "預覽"

#: ../src/common/fontcmn.cpp:978
msgid " bold"
msgstr "粗體"

#: ../src/common/fontcmn.cpp:982
#| msgid " bold"
msgid " extra bold"
msgstr " 特粗"

#: ../src/common/fontcmn.cpp:990
msgid " extra heavy"
msgstr " 特濃"

#: ../src/common/fontcmn.cpp:962
#| msgid " light"
msgid " extra light"
msgstr " 特細"

#: ../src/common/fontcmn.cpp:986
msgid " heavy"
msgstr " 濃體"

#: ../src/common/fontcmn.cpp:1006
msgid " italic"
msgstr "斜體"

#: ../src/common/fontcmn.cpp:966
msgid " light"
msgstr "細體"

#: ../src/common/fontcmn.cpp:970
msgid " medium"
msgstr " 適中"

#: ../src/common/fontcmn.cpp:974
#| msgid " bold"
msgid " semi bold"
msgstr " 次粗"

#: ../src/common/fontcmn.cpp:945
msgid " strikethrough"
msgstr "刪除線"

#: ../src/common/fontcmn.cpp:958
msgid " thin"
msgstr " 淡體"

#: ../src/common/paper.cpp:117
msgid "#10 Envelope, 4 1/8 x 9 1/2 in"
msgstr "#10 信封，4 1/8 x 9 1/2 英吋"

#: ../src/common/paper.cpp:118
msgid "#11 Envelope, 4 1/2 x 10 3/8 in"
msgstr "#11 信封，4 1/2 x 10 3/8 英吋"

#: ../src/common/paper.cpp:119
msgid "#12 Envelope, 4 3/4 x 11 in"
msgstr "#12 信封，4 3/4 x 11 英吋"

#: ../src/common/paper.cpp:120
msgid "#14 Envelope, 5 x 11 1/2 in"
msgstr "#14 信封，5 x 11 1/2 英吋"

#: ../src/common/paper.cpp:116
msgid "#9 Envelope, 3 7/8 x 8 7/8 in"
msgstr "#9 信封, 3 7/8 x 8 7/8 英吋"

#: ../src/html/helpwnd.cpp:1032
#, c-format
msgid "%d of %lu"
msgstr "%d / %lu"

#: ../src/html/helpwnd.cpp:1679
#, c-format
msgid "%i of %u"
msgstr "%i / %u"

#: ../src/generic/filectrlg.cpp:279
#, c-format
msgid "%ld byte"
msgid_plural "%ld bytes"
msgstr[0] "%ld 位元組"

#: ../src/html/helpwnd.cpp:1034
#, c-format
msgid "%lu of %lu"
msgstr "%lu / %lu"

#: ../src/generic/datavgen.cpp:6476
#, c-format
msgid "%s (%d items)"
msgstr "%s (%d 個項目)"

#: ../src/common/cmdline.cpp:1220
#, c-format
msgid "%s (or %s)"
msgstr "%s (或 %s)"

#: ../src/generic/logg.cpp:224
#, c-format
msgid "%s Error"
msgstr "%s 錯誤"

#: ../src/generic/logg.cpp:236
#, c-format
msgid "%s Information"
msgstr "%s 資訊"

#: ../src/generic/preferencesg.cpp:113
#, c-format
msgid "%s Preferences"
msgstr "%s 偏好設定"

#: ../src/generic/logg.cpp:228
#, c-format
msgid "%s Warning"
msgstr "%s 警告"

#: ../src/common/tarstrm.cpp:1316
#, c-format
msgid "%s did not fit the tar header for entry '%s'"
msgstr "%s 不符合項目「%s」的 tar 標頭"

#: ../src/common/fldlgcmn.cpp:124
#, c-format
msgid "%s files (%s)|%s"
msgstr "%s 個檔案 (%s)|%s"

#: ../src/html/helpwnd.cpp:1717
#, c-format
msgid "%u of %u"
msgstr "%u / %u"

#: ../src/common/stockitem.cpp:139
msgid "&About"
msgstr "關於(&A)"

#: ../src/common/stockitem.cpp:207
msgid "&Actual Size"
msgstr "實際大小(&A)"

#: ../src/richtext/richtextindentspage.cpp:262
msgid "&After a paragraph:"
msgstr "段落之後(&A)："

#: ../src/richtext/richtextindentspage.cpp:128
#: ../src/richtext/richtextliststylepage.cpp:319
msgid "&Alignment"
msgstr "對齊(&A)"

#: ../src/common/stockitem.cpp:141
msgid "&Apply"
msgstr "套用(&A)"

#: ../src/richtext/richtextstyledlg.cpp:251
msgid "&Apply Style"
msgstr "套用樣式(&A)"

#: ../src/msw/mdi.cpp:177
msgid "&Arrange Icons"
msgstr "排列圖示(&A)"

#: ../src/common/stockitem.cpp:195
msgid "&Ascending"
msgstr "遞增(&A)"

#: ../src/common/stockitem.cpp:142
msgid "&Back"
msgstr "回傳(&B)"

#: ../src/richtext/richtextstylepage.cpp:115
msgid "&Based on:"
msgstr "基於(&B)："

#: ../src/richtext/richtextindentspage.cpp:253
msgid "&Before a paragraph:"
msgstr "段落之前(&B)："

#: ../src/richtext/richtextfontpage.cpp:262
msgid "&Bg colour:"
msgstr "背景顏色(&B)："

#: ../src/richtext/richtextbackgroundpage.cpp:298
msgid "&Blur distance:"
msgstr "模糊距離(&B)："

#: ../src/common/stockitem.cpp:143
msgid "&Bold"
msgstr "粗體(&B)"

#: ../src/common/stockitem.cpp:144
msgid "&Bottom"
msgstr "底端(&B)"

#: ../src/richtext/richtextborderspage.cpp:345
#: ../src/richtext/richtextborderspage.cpp:513
#: ../src/richtext/richtextmarginspage.cpp:259
#: ../src/richtext/richtextmarginspage.cpp:373
#: ../src/richtext/richtextsizepage.cpp:637
#: ../src/richtext/richtextsizepage.cpp:644
msgid "&Bottom:"
msgstr "底端(&B):"

#: ../include/wx/richtext/richtextbuffer.h:3861
msgid "&Box"
msgstr "文字方塊(&B)"

#: ../src/richtext/richtextbulletspage.cpp:146
#: ../src/richtext/richtextliststylepage.cpp:210
msgid "&Bullet style:"
msgstr "項目符號樣式(&B):"

#: ../src/common/stockitem.cpp:146
msgid "&CD-Rom"
msgstr "唯讀光碟(&C)"

#: ../src/common/stockitem.cpp:145 ../src/generic/fontdlgg.cpp:470
#: ../src/generic/fontdlgg.cpp:489 ../src/generic/wizard.cpp:436
#: ../src/osx/carbon/fontdlg.cpp:402
msgid "&Cancel"
msgstr "取消(&C)"

#: ../src/msw/mdi.cpp:173
msgid "&Cascade"
msgstr "層疊排列(&C)"

#: ../include/wx/richtext/richtextbuffer.h:5955
msgid "&Cell"
msgstr "儲存格(&C)"

#: ../src/richtext/richtextsymboldlg.cpp:439
msgid "&Character code:"
msgstr "字元碼(&C):"

#: ../src/common/stockitem.cpp:147
msgid "&Clear"
msgstr "清除(&C)"

#: ../src/common/prntbase.cpp:1630 ../src/common/stockitem.cpp:148
#: ../src/generic/logg.cpp:516 ../src/univ/themes/win32.cpp:3756
msgid "&Close"
msgstr "關閉(&C)"

#: ../src/common/stockitem.cpp:193
msgid "&Color"
msgstr "顏色(&C)"

#: ../src/richtext/richtextfontpage.cpp:249
msgid "&Colour:"
msgstr "顏色(&C)："

#: ../src/generic/hyperlinkg.cpp:156
msgid "&Copy URL"
msgstr "複製網址(&C)"

#: ../src/common/headerctrlcmn.cpp:307
msgid "&Customize..."
msgstr "自訂(&C)..."

#: ../src/generic/dbgrptg.cpp:337
msgid "&Debug report preview:"
msgstr "除錯報告預覽(&D)："

#: ../src/common/stockitem.cpp:152 ../src/msw/textctrl.cpp:2725
#: ../src/osx/textctrl_osx.cpp:587 ../src/richtext/richtextctrl.cpp:337
#: ../src/richtext/richtexttabspage.cpp:138
msgid "&Delete"
msgstr "刪除(&D)"

#: ../src/richtext/richtextstyledlg.cpp:269
msgid "&Delete Style..."
msgstr "刪除樣式(&D)"

#: ../src/common/stockitem.cpp:196
msgid "&Descending"
msgstr "遞減(&D)"

#: ../src/generic/logg.cpp:682
msgid "&Details"
msgstr "細節(&D)"

#: ../src/common/stockitem.cpp:153
msgid "&Down"
msgstr "向下(&D)"

#: ../src/richtext/richtextstyledlg.cpp:263
msgid "&Edit Style..."
msgstr "編輯樣式(&E)…"

#: ../src/common/stockitem.cpp:155
msgid "&Execute"
msgstr "執行(&E)"

#: ../src/common/stockitem.cpp:158
#| msgid "&Find"
msgid "&Find..."
msgstr "尋找(&F)…"

#: ../src/common/stockitem.cpp:159
msgid "&First"
msgstr "第一(&F)"

#: ../src/richtext/richtextsizepage.cpp:244
msgid "&Floating mode:"
msgstr "浮動模式(&F):"

#: ../src/common/stockitem.cpp:160
msgid "&Floppy"
msgstr "軟碟(&F)"

#: ../src/common/stockitem.cpp:194
msgid "&Font"
msgstr "字型(&F)"

#: ../src/generic/fontdlgg.cpp:371
msgid "&Font family:"
msgstr "字族(&F)："

#: ../src/richtext/richtextliststylepage.cpp:194
msgid "&Font for Level..."
msgstr "層級字型(&F)..."

#: ../src/richtext/richtextfontpage.cpp:147
#: ../src/richtext/richtextsymboldlg.cpp:400
msgid "&Font:"
msgstr "字型(&F)："

#: ../src/common/stockitem.cpp:161
msgid "&Forward"
msgstr "向前(&F)"

#: ../src/richtext/richtextsymboldlg.cpp:451
msgid "&From:"
msgstr "從(&F)："

#: ../src/common/stockitem.cpp:162
msgid "&Harddisk"
msgstr "硬碟(&H)"

#: ../src/richtext/richtextsizepage.cpp:351
#: ../src/richtext/richtextsizepage.cpp:358
msgid "&Height:"
msgstr "高度(&H):"

#: ../include/wx/richmsgdlg.h:30
msgid "&Hide details"
msgstr "隱藏細節(&H)"

#: ../src/common/stockitem.cpp:164
msgid "&Home"
msgstr "首頁(&H)"

#: ../src/richtext/richtextbackgroundpage.cpp:212
msgid "&Horizontal offset:"
msgstr "水平偏移值(&H)："

#: ../src/richtext/richtextindentspage.cpp:184
#: ../src/richtext/richtextliststylepage.cpp:372
msgid "&Indentation (tenths of a mm)"
msgstr "縮排(&I) (十分之一公釐[mm])"

#: ../src/richtext/richtextindentspage.cpp:167
#: ../src/richtext/richtextliststylepage.cpp:356
msgid "&Indeterminate"
msgstr "尚未設定(&I)"

#: ../src/common/stockitem.cpp:166
msgid "&Index"
msgstr "索引(&I)"

#: ../src/common/stockitem.cpp:167
msgid "&Info"
msgstr "資訊(&I)"

#: ../src/common/stockitem.cpp:168
msgid "&Italic"
msgstr "斜體(&I)"

#: ../src/common/stockitem.cpp:169
msgid "&Jump to"
msgstr "跳至(&J)"

#: ../src/richtext/richtextindentspage.cpp:153
#: ../src/richtext/richtextliststylepage.cpp:342
msgid "&Justified"
msgstr "分散對齊(&J)"

#: ../src/common/stockitem.cpp:174
msgid "&Last"
msgstr "最後(&L)"

#: ../src/richtext/richtextindentspage.cpp:139
#: ../src/richtext/richtextliststylepage.cpp:328
msgid "&Left"
msgstr "左側(&L)"

#: ../src/richtext/richtextborderspage.cpp:243
#: ../src/richtext/richtextborderspage.cpp:411
#: ../src/richtext/richtextindentspage.cpp:195
#: ../src/richtext/richtextliststylepage.cpp:381
#: ../src/richtext/richtextmarginspage.cpp:186
#: ../src/richtext/richtextmarginspage.cpp:300
#: ../src/richtext/richtextsizepage.cpp:532
#: ../src/richtext/richtextsizepage.cpp:539
msgid "&Left:"
msgstr "左側(&L)："

#: ../src/richtext/richtextliststylepage.cpp:183
msgid "&List level:"
msgstr "清單層級(&L)："

#: ../src/generic/logg.cpp:517
msgid "&Log"
msgstr "日誌(&L)"

#: ../src/univ/themes/win32.cpp:3748
msgid "&Move"
msgstr "移動(&M)"

#: ../src/richtext/richtextsizepage.cpp:672
msgid "&Move the object to:"
msgstr "移動物件至(&M)："

#: ../src/common/stockitem.cpp:175
msgid "&Network"
msgstr "網路(&N)"

#: ../src/common/stockitem.cpp:176 ../src/richtext/richtexttabspage.cpp:132
msgid "&New"
msgstr "新增(&N)"

#: ../src/aui/tabmdi.cpp:111 ../src/generic/mdig.cpp:100 ../src/msw/mdi.cpp:178
msgid "&Next"
msgstr "下一個(&N)"

#: ../src/richtext/richtextsizepage.cpp:681
msgid "&Next Paragraph"
msgstr "下一個段落(&N)"

#: ../src/generic/tipdlg.cpp:240
msgid "&Next Tip"
msgstr "下一個祕訣(&N)"

#: ../src/richtext/richtextstylepage.cpp:125
msgid "&Next style:"
msgstr "下一個樣式(&N)："

#: ../src/common/stockitem.cpp:177 ../src/msw/msgdlg.cpp:438
msgid "&No"
msgstr "否(&N)"

#: ../src/generic/dbgrptg.cpp:363
msgid "&Notes:"
msgstr "注意(&N)："

#: ../src/richtext/richtextbulletspage.cpp:251
msgid "&Number:"
msgstr "編號(&N)："

#: ../src/common/stockitem.cpp:178 ../src/generic/fontdlgg.cpp:475
#: ../src/generic/fontdlgg.cpp:482 ../src/osx/carbon/fontdlg.cpp:408
msgid "&OK"
msgstr "確認(&O)"

#: ../src/common/stockitem.cpp:179 ../src/generic/dbgrptg.cpp:345
msgid "&Open..."
msgstr "開啟(&O)…"

#: ../src/richtext/richtextindentspage.cpp:222
msgid "&Outline level:"
msgstr "大綱層級(&O)："

#: ../src/richtext/richtextindentspage.cpp:293
msgid "&Page Break"
msgstr "換頁符號(&P)"

#: ../include/wx/richtext/richtextbuffer.h:5005
msgid "&Picture"
msgstr "圖片(&P)"

#: ../src/generic/fontdlgg.cpp:423
msgid "&Point size:"
msgstr "字點大小(&P)："

#: ../src/richtext/richtexttabspage.cpp:110
msgid "&Position (tenths of a mm):"
msgstr "位置(&P) (十分之一公釐[mm])："

#: ../src/richtext/richtextsizepage.cpp:514
msgid "&Position mode:"
msgstr "位置模式(&P)："

#: ../src/aui/tabmdi.cpp:112 ../src/generic/mdig.cpp:101 ../src/msw/mdi.cpp:179
msgid "&Previous"
msgstr "上一個(&P)"

#: ../src/richtext/richtextsizepage.cpp:675
msgid "&Previous Paragraph"
msgstr "上一個段落(&P)"

#: ../src/common/stockitem.cpp:183
msgid "&Print..."
msgstr "列印(&P)…"

#: ../src/common/stockitem.cpp:184 ../src/richtext/richtextctrl.cpp:341
#: ../src/richtext/richtextctrl.cpp:5515
msgid "&Properties"
msgstr "性質(&P)"

#: ../src/common/cmdproc.cpp:285 ../src/common/cmdproc.cpp:305
msgid "&Redo "
msgstr "重做(&R)"

#: ../src/richtext/richtextstyledlg.cpp:257
msgid "&Rename Style..."
msgstr "重新命名樣式(&R)…"

#: ../src/generic/fdrepdlg.cpp:179
msgid "&Replace"
msgstr "取代(&R)"

#: ../src/richtext/richtextstyledlg.cpp:287
msgid "&Restart numbering"
msgstr "重新編號(&R)"

#: ../src/univ/themes/win32.cpp:3747
msgid "&Restore"
msgstr "回存(&R)"

#: ../src/richtext/richtextindentspage.cpp:146
#: ../src/richtext/richtextliststylepage.cpp:335
msgid "&Right"
msgstr "右側(&R)"

#: ../src/richtext/richtextborderspage.cpp:277
#: ../src/richtext/richtextborderspage.cpp:445
#: ../src/richtext/richtextindentspage.cpp:213
#: ../src/richtext/richtextliststylepage.cpp:399
#: ../src/richtext/richtextmarginspage.cpp:211
#: ../src/richtext/richtextmarginspage.cpp:325
#: ../src/richtext/richtextsizepage.cpp:602
#: ../src/richtext/richtextsizepage.cpp:609
msgid "&Right:"
msgstr "右側(&R)："

#: ../src/common/stockitem.cpp:190
msgid "&Save"
msgstr "儲存(&S)"

#: ../include/wx/richmsgdlg.h:29
msgid "&See details"
msgstr "看細節(&S)"

#: ../src/generic/tipdlg.cpp:236
msgid "&Show tips at startup"
msgstr "啟動時顯示小祕訣(&S)"

#: ../src/univ/themes/win32.cpp:3750
msgid "&Size"
msgstr "大小(&S)"

#: ../src/richtext/richtextfontpage.cpp:159
msgid "&Size:"
msgstr "大小(&S)："

#: ../src/generic/progdlgg.cpp:252
msgid "&Skip"
msgstr "略過(&S)"

#: ../src/richtext/richtextindentspage.cpp:242
#: ../src/richtext/richtextliststylepage.cpp:417
msgid "&Spacing (tenths of a mm)"
msgstr "間距(&S) (十分之一公釐[mm])"

#: ../src/common/stockitem.cpp:197
msgid "&Spell Check"
msgstr "拼字檢查(&S)"

#: ../src/common/stockitem.cpp:198
msgid "&Stop"
msgstr "停止(&S)"

#: ../src/common/stockitem.cpp:199 ../src/richtext/richtextfontpage.cpp:275
msgid "&Strikethrough"
msgstr "刪除線(&S)"

#: ../src/generic/fontdlgg.cpp:382 ../src/richtext/richtextstylepage.cpp:106
msgid "&Style:"
msgstr "樣式(&S)："

#: ../src/richtext/richtextstyledlg.cpp:198
msgid "&Styles:"
msgstr "樣式(&S)："

#: ../src/richtext/richtextsymboldlg.cpp:413
msgid "&Subset:"
msgstr "子集合(&S):"

#: ../src/richtext/richtextbulletspage.cpp:209
#: ../src/richtext/richtextliststylepage.cpp:268
msgid "&Symbol:"
msgstr "符號(&S)："

#: ../src/richtext/richtextborderspage.cpp:381
#: ../src/richtext/richtextborderspage.cpp:549
msgid "&Synchronize values"
msgstr "將值同步化(&S)"

#: ../include/wx/richtext/richtextbuffer.h:6064
msgid "&Table"
msgstr "表格(&T)"

#: ../src/common/stockitem.cpp:200
msgid "&Top"
msgstr "頂端(&T)"

#: ../src/richtext/richtextborderspage.cpp:311
#: ../src/richtext/richtextborderspage.cpp:479
#: ../src/richtext/richtextmarginspage.cpp:234
#: ../src/richtext/richtextmarginspage.cpp:348
#: ../src/richtext/richtextsizepage.cpp:567
#: ../src/richtext/richtextsizepage.cpp:574
msgid "&Top:"
msgstr "頂端(&T):"

#: ../src/common/stockitem.cpp:202 ../src/generic/fontdlgg.cpp:445
msgid "&Underline"
msgstr "底線(&U)"

#: ../src/richtext/richtextfontpage.cpp:234
msgid "&Underlining:"
msgstr "加底線(&U)："

#: ../src/common/cmdproc.cpp:261
msgid "&Undo "
msgstr "回復(&U)"

#: ../src/common/stockitem.cpp:204
msgid "&Unindent"
msgstr "取消縮排(&U)"

#: ../src/common/stockitem.cpp:205
msgid "&Up"
msgstr "向上(&U)"

#: ../src/richtext/richtextsizepage.cpp:278
msgid "&Vertical alignment:"
msgstr "垂直對齊(&V)："

#: ../src/richtext/richtextbackgroundpage.cpp:235
msgid "&Vertical offset:"
msgstr "垂直偏移值(&V)："

#: ../src/generic/dbgrptg.cpp:343
msgid "&View..."
msgstr "檢視(&V)…"

#: ../src/generic/fontdlgg.cpp:393
msgid "&Weight:"
msgstr "粗細(&W)："

#: ../src/richtext/richtextsizepage.cpp:317
#: ../src/richtext/richtextsizepage.cpp:324
msgid "&Width:"
msgstr "寬度(&W)："

#: ../src/common/stockitem.cpp:206 ../src/msw/msgdlg.cpp:438
msgid "&Yes"
msgstr "是(&Y)"

#: ../src/common/valtext.cpp:200
#, c-format
#| msgid "'%s' contains illegal characters"
msgid "'%s' contains invalid character(s)"
msgstr "「%s」含有無效字元"

#: ../src/common/config.cpp:519 ../src/msw/regconf.cpp:258
#, c-format
msgid "'%s' has extra '..', ignored."
msgstr "「%s」有額外的 '..'，已忽略。"

#: ../src/common/cmdline.cpp:1112 ../src/common/cmdline.cpp:1130
#, c-format
msgid "'%s' is not a correct numeric value for option '%s'."
msgstr "「%s」不是選項 '%s' 的正確數值。"

#: ../src/common/translation.cpp:1144
#, c-format
msgid "'%s' is not a valid message catalog."
msgstr "「%s」不是有效的訊息登錄檔。"

#: ../src/common/valtext.cpp:191
#, c-format
msgid "'%s' is not one of the valid strings"
msgstr "「%s」不是有效字串之一"

#: ../src/common/valtext.cpp:189
#, c-format
msgid "'%s' is one of the invalid strings"
msgstr "「%s」是無效字串之一"

#: ../src/common/textbuf.cpp:237
#, c-format
msgid "'%s' is probably a binary buffer."
msgstr "「%s」或許是個二進位緩衝區。"

#: ../src/richtext/richtextbulletspage.cpp:166
#: ../src/richtext/richtextliststylepage.cpp:229
msgid "(*)"
msgstr "(*)"

#: ../src/html/helpwnd.cpp:964
msgid "(Help)"
msgstr "(說明)"

#: ../src/richtext/richtextbulletspage.cpp:273
#: ../src/richtext/richtextliststylepage.cpp:481
msgid "(None)"
msgstr "(無)"

#: ../src/richtext/richtextsymboldlg.cpp:504
msgid "(Normal text)"
msgstr "(正常文字)"

#: ../src/html/helpwnd.cpp:420 ../src/html/helpwnd.cpp:1107
#: ../src/html/helpwnd.cpp:1743
msgid "(bookmarks)"
msgstr "(書籤)"

#: ../src/richtext/richtextfontpage.cpp:349
#: ../src/richtext/richtextfontpage.cpp:353
#: ../src/richtext/richtextfontpage.cpp:357
#: ../src/richtext/richtextformatdlg.cpp:879
#: ../src/richtext/richtextindentspage.cpp:274
#: ../src/richtext/richtextindentspage.cpp:286
#: ../src/richtext/richtextindentspage.cpp:287
#: ../src/richtext/richtextindentspage.cpp:311
#: ../src/richtext/richtextindentspage.cpp:326
#: ../src/richtext/richtextliststylepage.cpp:448
#: ../src/richtext/richtextliststylepage.cpp:460
#: ../src/richtext/richtextliststylepage.cpp:461
msgid "(none)"
msgstr "(無)"

#: ../src/richtext/richtextbulletspage.cpp:284
#: ../src/richtext/richtextliststylepage.cpp:492
msgid "*"
msgstr "*"

#: ../src/richtext/richtextbulletspage.cpp:173
#: ../src/richtext/richtextliststylepage.cpp:236
msgid "*)"
msgstr "*)"

#: ../src/richtext/richtextbulletspage.cpp:287
#: ../src/richtext/richtextliststylepage.cpp:495
msgid "+"
msgstr "+"

#: ../src/msw/utils.cpp:1153
msgid ", 64-bit edition"
msgstr "，64 位元版"

#: ../src/richtext/richtextbulletspage.cpp:285
#: ../src/richtext/richtextliststylepage.cpp:493
msgid "-"
msgstr "-"

#: ../src/generic/filepickerg.cpp:66
msgid "..."
msgstr "..."

#: ../src/richtext/richtextindentspage.cpp:276
#: ../src/richtext/richtextliststylepage.cpp:450
msgid "1.1"
msgstr "1.1"

#: ../src/richtext/richtextindentspage.cpp:277
#: ../src/richtext/richtextliststylepage.cpp:451
msgid "1.2"
msgstr "1.2"

#: ../src/richtext/richtextindentspage.cpp:278
#: ../src/richtext/richtextliststylepage.cpp:452
msgid "1.3"
msgstr "1.3"

#: ../src/richtext/richtextindentspage.cpp:279
#: ../src/richtext/richtextliststylepage.cpp:453
msgid "1.4"
msgstr "1.4"

#: ../src/richtext/richtextindentspage.cpp:280
#: ../src/richtext/richtextliststylepage.cpp:454
msgid "1.5"
msgstr "1.5"

#: ../src/richtext/richtextindentspage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:455
msgid "1.6"
msgstr "1.6"

#: ../src/richtext/richtextindentspage.cpp:282
#: ../src/richtext/richtextliststylepage.cpp:456
msgid "1.7"
msgstr "1.7"

#: ../src/richtext/richtextindentspage.cpp:283
#: ../src/richtext/richtextliststylepage.cpp:457
msgid "1.8"
msgstr "1.8"

#: ../src/richtext/richtextindentspage.cpp:284
#: ../src/richtext/richtextliststylepage.cpp:458
msgid "1.9"
msgstr "1.9"

#: ../src/common/paper.cpp:140
msgid "10 x 11 in"
msgstr "10 x 11 英吋"

#: ../src/common/paper.cpp:113
msgid "10 x 14 in"
msgstr "10 x 14 英吋"

#: ../src/common/paper.cpp:114
msgid "11 x 17 in"
msgstr "11 x 17 英吋"

#: ../src/common/paper.cpp:184
msgid "12 x 11 in"
msgstr "12 x 11 英吋"

#: ../src/common/paper.cpp:141
msgid "15 x 11 in"
msgstr "15 x 11 英吋"

#: ../src/richtext/richtextindentspage.cpp:285
#: ../src/richtext/richtextliststylepage.cpp:459
msgid "2"
msgstr "2"

#: ../src/common/paper.cpp:132
msgid "6 3/4 Envelope, 3 5/8 x 6 1/2 in"
msgstr "6 3/4 信封，3 5/8 x 6 1/2 英吋"

#: ../src/common/paper.cpp:139
msgid "9 x 11 in"
msgstr "9 x 11 英吋"

#: ../src/html/htmprint.cpp:446
msgid ": file does not exist!"
msgstr ": 檔案不存在！"

#: ../src/common/fontmap.cpp:199
msgid ": unknown charset"
msgstr ": 不明的字集"

#: ../src/common/fontmap.cpp:413
msgid ": unknown encoding"
msgstr ": 不明的編碼"

#: ../src/osx/carbon/fontdlg.cpp:422 ../src/osx/carbon/fontdlg.cpp:628
#: ../src/osx/carbon/fontdlg.cpp:648
msgid "<Any Decorative>"
msgstr "<任何修飾字體>"

#: ../src/osx/carbon/fontdlg.cpp:423 ../src/osx/carbon/fontdlg.cpp:630
#: ../src/osx/carbon/fontdlg.cpp:650
msgid "<Any Modern>"
msgstr "<任何現代字體>"

#: ../src/osx/carbon/fontdlg.cpp:421 ../src/osx/carbon/fontdlg.cpp:626
#: ../src/osx/carbon/fontdlg.cpp:646
msgid "<Any Roman>"
msgstr "<任何羅馬字體>"

#: ../src/osx/carbon/fontdlg.cpp:424 ../src/osx/carbon/fontdlg.cpp:632
#: ../src/osx/carbon/fontdlg.cpp:652
msgid "<Any Script>"
msgstr "<任何手寫字體>"

#: ../src/osx/carbon/fontdlg.cpp:425 ../src/osx/carbon/fontdlg.cpp:637
#: ../src/osx/carbon/fontdlg.cpp:656
msgid "<Any Swiss>"
msgstr "<任何瑞士字體>"

#: ../src/osx/carbon/fontdlg.cpp:426 ../src/osx/carbon/fontdlg.cpp:634
#: ../src/osx/carbon/fontdlg.cpp:654
msgid "<Any Teletype>"
msgstr "<任何打字字體>"

#: ../src/osx/carbon/fontdlg.cpp:420
msgid "<Any>"
msgstr "<任何字體>"

#: ../src/generic/filectrlg.cpp:250 ../src/generic/filectrlg.cpp:273
msgid "<DIR>"
msgstr "<目錄>"

#: ../src/generic/filectrlg.cpp:254 ../src/generic/filectrlg.cpp:277
msgid "<DRIVE>"
msgstr "<磁碟機>"

#: ../src/generic/filectrlg.cpp:252 ../src/generic/filectrlg.cpp:275
msgid "<LINK>"
msgstr "<連結>"

#: ../src/html/helpwnd.cpp:1267
msgid "<b><i>Bold italic face.</i></b><br>"
msgstr "<b><i>粗斜體</i></b><br>"

#: ../src/html/helpwnd.cpp:1271
msgid "<b><i>bold italic <u>underlined</u></i></b><br>"
msgstr "<b><i>粗斜<u>加底線</u></i></b><br>"

#: ../src/html/helpwnd.cpp:1266
msgid "<b>Bold face.</b> "
msgstr "<b>粗體</b> "

#: ../src/html/helpwnd.cpp:1265
msgid "<i>Italic face.</i> "
msgstr "<i>斜體</i> "

#: ../src/richtext/richtextbulletspage.cpp:286
#: ../src/richtext/richtextliststylepage.cpp:494
msgid ">"
msgstr ">"

#: ../src/generic/dbgrptg.cpp:320
msgid "A debug report has been generated in the directory\n"
msgstr "產生了一份除錯報告, 位於目錄\n"

#: ../src/common/debugrpt.cpp:577
msgid "A debug report has been generated. It can be found in"
msgstr "產生了一份除錯報告, 位於目錄"

#: ../src/common/xtixml.cpp:418
msgid "A non empty collection must consist of 'element' nodes"
msgstr "非空集合必須包含 'element' 節點"

#: ../src/richtext/richtextbulletspage.cpp:244
#: ../src/richtext/richtextbulletspage.cpp:246
#: ../src/richtext/richtextliststylepage.cpp:304
#: ../src/richtext/richtextliststylepage.cpp:306
msgid "A standard bullet name."
msgstr "標準的項目符號名稱。"

#: ../src/common/paper.cpp:217
msgid "A0 sheet, 841 x 1189 mm"
msgstr "A0 印刷紙，841 x 1189 公釐"

#: ../src/common/paper.cpp:218
msgid "A1 sheet, 594 x 841 mm"
msgstr "A1 印刷紙，594 x 841 公釐"

#: ../src/common/paper.cpp:159
msgid "A2 420 x 594 mm"
msgstr "A2 420 x 594 公釐"

#: ../src/common/paper.cpp:156
msgid "A3 Extra 322 x 445 mm"
msgstr "A3 加長 322 x 445 公釐"

#: ../src/common/paper.cpp:161
msgid "A3 Extra Transverse 322 x 445 mm"
msgstr "A3 加長橫向 322 x 445 公釐"

#: ../src/common/paper.cpp:170
msgid "A3 Rotated 420 x 297 mm"
msgstr "A3 轉向 420 x 297 公釐"

#: ../src/common/paper.cpp:160
msgid "A3 Transverse 297 x 420 mm"
msgstr "A3 轉向 297 x 420 公釐"

#: ../src/common/paper.cpp:106
msgid "A3 sheet, 297 x 420 mm"
msgstr "A3 印刷紙，297 x 420 公釐"

#: ../src/common/paper.cpp:146
msgid "A4 Extra 9.27 x 12.69 in"
msgstr "A4 加長 9.27 x 12.69 英吋"

#: ../src/common/paper.cpp:153
msgid "A4 Plus 210 x 330 mm"
msgstr "A4 增大 210 x 330 公釐"

#: ../src/common/paper.cpp:171
msgid "A4 Rotated 297 x 210 mm"
msgstr "A3 轉向 297 x 210 公釐"

#: ../src/common/paper.cpp:148
msgid "A4 Transverse 210 x 297 mm"
msgstr "A4 橫向 210 x 297 公釐"

#: ../src/common/paper.cpp:97
msgid "A4 sheet, 210 x 297 mm"
msgstr "A4 印刷紙，210 x 297 公釐"

#: ../src/common/paper.cpp:107
msgid "A4 small sheet, 210 x 297 mm"
msgstr "A4 印刷小紙張，210 x 297 公釐"

#: ../src/common/paper.cpp:157
msgid "A5 Extra 174 x 235 mm"
msgstr "A5 加長 174 x 235 公釐"

#: ../src/common/paper.cpp:172
msgid "A5 Rotated 210 x 148 mm"
msgstr "A5 轉向 210 x 148 公釐"

#: ../src/common/paper.cpp:154
msgid "A5 Transverse 148 x 210 mm"
msgstr "A5 橫向 148 x 210 公釐"

#: ../src/common/paper.cpp:108
msgid "A5 sheet, 148 x 210 mm"
msgstr "A5 印刷紙，148 x 210 公釐"

#: ../src/common/paper.cpp:164
msgid "A6 105 x 148 mm"
msgstr "A6 105 x 148 公釐"

#: ../src/common/paper.cpp:177
msgid "A6 Rotated 148 x 105 mm"
msgstr "A6 轉向 148 x 105 公釐"

#: ../src/generic/fontdlgg.cpp:83 ../src/osx/carbon/fontdlg.cpp:153
#: ../src/richtext/richtextformatdlg.cpp:524
msgid "ABCDEFGabcdefg12345"
msgstr "ABCDEFGabcdefg12345"

#: ../src/common/ftp.cpp:403 ../src/richtext/richtextsymboldlg.cpp:458
msgid "ASCII"
msgstr "ASCII"

#: ../src/common/stockitem.cpp:139
msgid "About"
msgstr "關於"

#: ../src/osx/menu_osx.cpp:449
msgid "About..."
msgstr "關於..."

#: ../src/richtext/richtextsizepage.cpp:520
msgid "Absolute"
msgstr "絕對"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:777
msgid "ActiveBorder"
msgstr "有效邊框"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:778
msgid "ActiveCaption"
msgstr "有效標題"

#: ../src/common/stockitem.cpp:207
msgid "Actual Size"
msgstr "實際大小`"

#: ../src/richtext/richtextbuffer.cpp:11457
msgid "Add Column"
msgstr "加入欄位"

#: ../src/richtext/richtextbuffer.cpp:11394
msgid "Add Row"
msgstr "加入橫列"

#: ../src/html/helpwnd.cpp:433
msgid "Add current page to bookmarks"
msgstr "把目前頁面加到書籤"

#: ../src/generic/colrdlgg.cpp:366
msgid "Add to custom colours"
msgstr "加到自訂顏色"

#: ../include/wx/xtiprop.h:255
msgid "AddToPropertyCollection called on a generic accessor"
msgstr "在一個通用處理器上呼叫AddToPropertyCollection"

#: ../include/wx/xtiprop.h:193
msgid "AddToPropertyCollection called w/o valid adder"
msgstr "呼叫AddToPropertyCollection時未帶有效的adder"

#: ../src/html/helpctrl.cpp:159
#, c-format
msgid "Adding book %s"
msgstr "正在加入卷輯 %s"

#: ../src/richtext/richtextliststylepage.cpp:435
msgid "After a paragraph:"
msgstr "段落之後："

#: ../src/common/stockitem.cpp:172
msgid "Align Left"
msgstr "靠左對齊"

#: ../src/common/stockitem.cpp:173
msgid "Align Right"
msgstr "靠右對齊"

#: ../src/common/fldlgcmn.cpp:107 ../src/generic/filectrlg.cpp:1197
#, c-format
msgid "All files (%s)|%s"
msgstr "所有檔案 (%s)|%s"

#: ../include/wx/defs.h:2546
msgid "All files (*)|*"
msgstr "所有檔案 (*)|*"

#: ../include/wx/defs.h:2543
msgid "All files (*.*)|*.*"
msgstr "所有檔案 (*.*)|*.*"

#: ../src/richtext/richtextstyles.cpp:1061
msgid "All styles"
msgstr "所有樣式"

#: ../src/propgrid/manager.cpp:1545
msgid "Alphabetic Mode"
msgstr "字母順序模式"

#: ../src/common/xtistrm.cpp:425
msgid "Already Registered Object passed to SetObjectClassInfo"
msgstr "傳入已註冊的物件給 SetObjectClassInfo"

#: ../src/unix/dialup.cpp:352
msgid "Already dialling ISP."
msgstr "已經撥接 ISP。"

#: ../src/common/accelcmn.cpp:348 ../src/univ/themes/win32.cpp:3756
msgid "Alt+"
msgstr "Alt+"

#: ../src/richtext/richtextborderspage.cpp:577
#: ../src/richtext/richtextborderspage.cpp:579
msgid "An optional corner radius for adding rounded corners."
msgstr "加入圓角時的半徑 （可有可無）"

#: ../src/common/debugrpt.cpp:580
msgid "And includes the following files:\n"
msgstr "且包含以下檔案：\n"

#: ../src/generic/animateg.cpp:162
#, c-format
msgid "Animation file is not of type %ld."
msgstr "動畫檔不是 %ld 的型態。"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:776
msgid "AppWorkspace"
msgstr "AppWorkspace"

#: ../src/generic/logg.cpp:1014
#, c-format
msgid "Append log to file '%s' (choosing [No] will overwrite it)?"
msgstr "是否把日誌加到檔案「%s」的尾端 (選擇 [否] 將覆寫該檔案)？"

#: ../src/osx/menu_osx.cpp:466 ../src/osx/menu_osx.cpp:474
msgid "Application"
msgstr "應用程式"

#: ../src/propgrid/advprops.cpp:1518
msgid "Aqua"
msgstr "Aqua"

#: ../src/richtext/richtextbulletspage.cpp:274
#: ../src/richtext/richtextliststylepage.cpp:482
msgid "Arabic"
msgstr "阿拉伯語"

#: ../src/common/fmapbase.cpp:153
msgid "Arabic (ISO-8859-6)"
msgstr "阿拉伯語 (ISO-8859-6)"

#: ../src/msw/ole/automtn.cpp:672
#, c-format
msgid "Argument %u not found."
msgstr "找不到引數 '%u'。"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1657
msgid "Arrow"
msgstr "箭頭"

#: ../src/generic/aboutdlgg.cpp:184
msgid "Artists"
msgstr "美術設計者"

#: ../src/common/stockitem.cpp:195
msgid "Ascending"
msgstr "遞增"

#: ../src/generic/filectrlg.cpp:433
msgid "Attributes"
msgstr "屬性"

#: ../src/richtext/richtextbulletspage.cpp:232
#: ../src/richtext/richtextbulletspage.cpp:234
#: ../src/richtext/richtextliststylepage.cpp:294
msgid "Available fonts."
msgstr "可用的字型。"

#: ../src/common/paper.cpp:137
msgid "B4 (ISO) 250 x 353 mm"
msgstr "B4 (ISO) 250 x 353 公釐"

#: ../src/common/paper.cpp:173
msgid "B4 (JIS) Rotated 364 x 257 mm"
msgstr "B4 (JIS) 轉向 364 x 257 公釐"

#: ../src/common/paper.cpp:127
msgid "B4 Envelope, 250 x 353 mm"
msgstr "B4 信封，250 x 353 公釐"

#: ../src/common/paper.cpp:109
msgid "B4 sheet, 250 x 354 mm"
msgstr "B4 印刷紙，250 x 354 公釐"

#: ../src/common/paper.cpp:158
msgid "B5 (ISO) Extra 201 x 276 mm"
msgstr "B5 (ISO) 加長 201 x 276 公釐"

#: ../src/common/paper.cpp:174
msgid "B5 (JIS) Rotated 257 x 182 mm"
msgstr "B5 (JIS) 轉向 257 x 182 公釐"

#: ../src/common/paper.cpp:155
msgid "B5 (JIS) Transverse 182 x 257 mm"
msgstr "B5 (JIS) 橫向 182 x 257 公釐"

#: ../src/common/paper.cpp:128
msgid "B5 Envelope, 176 x 250 mm"
msgstr "B5 信封，176 x 250 公釐"

#: ../src/common/paper.cpp:110
msgid "B5 sheet, 182 x 257 millimeter"
msgstr "B5 印刷紙，182 x 257 公釐"

#: ../src/common/paper.cpp:182
msgid "B6 (JIS) 128 x 182 mm"
msgstr "B6 (JIS) 128 x 182 公釐"

#: ../src/common/paper.cpp:183
msgid "B6 (JIS) Rotated 182 x 128 mm"
msgstr "B6 (JIS) 轉向 182 x 128 公釐"

#: ../src/common/paper.cpp:129
msgid "B6 Envelope, 176 x 125 mm"
msgstr "B6 信封，176 x 125 公釐"

#: ../src/common/imagbmp.cpp:531 ../src/common/imagbmp.cpp:561
#: ../src/common/imagbmp.cpp:576
msgid "BMP: Couldn't allocate memory."
msgstr "BMP: 無法配置記憶體。"

#: ../src/common/imagbmp.cpp:100
msgid "BMP: Couldn't save invalid image."
msgstr "BMP: 無法儲存無效的圖像。"

#: ../src/common/imagbmp.cpp:356
msgid "BMP: Couldn't write RGB color map."
msgstr "BMP: 無法寫入 RGB 顏色對應表。"

#: ../src/common/imagbmp.cpp:490
msgid "BMP: Couldn't write data."
msgstr "BMP: 無法寫入資料。"

#: ../src/common/imagbmp.cpp:246
msgid "BMP: Couldn't write the file (Bitmap) header."
msgstr "BMP: 無法寫入檔案標頭(Bitmap)。"

#: ../src/common/imagbmp.cpp:269
msgid "BMP: Couldn't write the file (BitmapInfo) header."
msgstr "BMP: 無法寫入檔案標頭(BitmapInfo)。"

#: ../src/common/imagbmp.cpp:140
msgid "BMP: wxImage doesn't have own wxPalette."
msgstr "BMP: wxImage 沒有自己的 wxPalette。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:52 ../src/common/stockitem.cpp:142
msgid "Back"
msgstr "Backspace"

#: ../src/richtext/richtextbackgroundpage.cpp:148
#: ../src/richtext/richtextformatdlg.cpp:380
msgid "Background"
msgstr "背景"

#: ../src/richtext/richtextbackgroundpage.cpp:160
msgid "Background &colour:"
msgstr "背景顏色(&C)："

#: ../src/osx/carbon/fontdlg.cpp:220
msgid "Background colour"
msgstr "背景顏色"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:52
msgid "Backspace"
msgstr "Backspace"

#: ../src/common/fmapbase.cpp:160
msgid "Baltic (ISO-8859-13)"
msgstr "波羅的海語系 (ISO-8859-13)"

#: ../src/common/fmapbase.cpp:151
msgid "Baltic (old) (ISO-8859-4)"
msgstr "波羅的海語系 (舊) (ISO-8859-4)"

#: ../src/richtext/richtextliststylepage.cpp:426
msgid "Before a paragraph:"
msgstr "段落之前："

#: ../src/richtext/richtextbulletspage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:489
msgid "Bitmap"
msgstr "點陣圖"

#: ../src/propgrid/advprops.cpp:1503
msgid "Black"
msgstr "黑色"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1659
msgid "Blank"
msgstr "空白"

#: ../src/propgrid/advprops.cpp:1512
msgid "Blue"
msgstr "藍色"

#: ../src/generic/colrdlgg.cpp:345
msgid "Blue:"
msgstr "藍色："

#: ../src/common/stockitem.cpp:143 ../src/generic/fontdlgg.cpp:333
#: ../src/osx/carbon/fontdlg.cpp:354 ../src/richtext/richtextfontpage.cpp:355
msgid "Bold"
msgstr "粗體"

#: ../src/richtext/richtextborderspage.cpp:230
#: ../src/richtext/richtextborderspage.cpp:388
msgid "Border"
msgstr "邊框"

#: ../src/richtext/richtextformatdlg.cpp:375
msgid "Borders"
msgstr "邊框"

#: ../src/generic/prntdlgg.cpp:889
msgid "Bottom margin (mm):"
msgstr "底邊距(公釐[mm])："

#: ../src/richtext/richtextbuffer.cpp:9383
msgid "Box Properties"
msgstr "文字方塊性質"

#: ../src/richtext/richtextstyles.cpp:1065
msgid "Box styles"
msgstr "文字方塊樣式"

#: ../src/propgrid/advprops.cpp:1511
msgid "Brown"
msgstr "梡色"

#: ../src/richtext/richtextbulletspage.cpp:182
#: ../src/richtext/richtextliststylepage.cpp:245
msgid "Bullet &Alignment:"
msgstr "項目符號對齊(&A):"

#: ../src/richtext/richtextliststylepage.cpp:309
msgid "Bullet style"
msgstr "項目符號樣式"

#: ../src/richtext/richtextformatdlg.cpp:355
msgid "Bullets"
msgstr "項目符號"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1660
msgid "Bullseye"
msgstr "標靶"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:779
msgid "ButtonFace"
msgstr "按鈕正面"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:780
msgid "ButtonHighlight"
msgstr "按鈕凸顯"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:781
msgid "ButtonShadow"
msgstr "按鈕陰影"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:782
msgid "ButtonText"
msgstr "按鈕文字"

#: ../src/common/paper.cpp:98
msgid "C sheet, 17 x 22 in"
msgstr "C 印刷紙, 17 x 22 英吋"

#: ../src/generic/logg.cpp:514
msgid "C&lear"
msgstr "清除(&L)"

#: ../src/generic/fontdlgg.cpp:407
msgid "C&olour:"
msgstr "顏色(&O)："

#: ../src/common/paper.cpp:123
msgid "C3 Envelope, 324 x 458 mm"
msgstr "C3 信封，324 x 458 公釐"

#: ../src/common/paper.cpp:124
msgid "C4 Envelope, 229 x 324 mm"
msgstr "C4 信封，229 x 324 公釐"

#: ../src/common/paper.cpp:122
msgid "C5 Envelope, 162 x 229 mm"
msgstr "C5 信封，162 x 229 公釐"

#: ../src/common/paper.cpp:125
msgid "C6 Envelope, 114 x 162 mm"
msgstr "C6 信封，114 x 162 公釐"

#: ../src/common/paper.cpp:126
msgid "C65 Envelope, 114 x 229 mm"
msgstr "C65 信封, 114 x 229 公釐"

#: ../src/common/stockitem.cpp:146
msgid "CD-Rom"
msgstr "唯讀光碟"

#: ../src/html/chm.cpp:813 ../src/html/chm.cpp:872
msgid "CHM handler currently supports only local files!"
msgstr "CHM 處理常式目前只支援本機檔案！"

#: ../src/richtext/richtextfontpage.cpp:282
msgid "Ca&pitals"
msgstr "大寫(&P)"

#: ../src/common/cmdproc.cpp:263
msgid "Can't &Undo "
msgstr "無法回復(&U)"

#: ../src/common/image.cpp:2839
msgid "Can't automatically determine the image format for non-seekable input."
msgstr "無法自動決定用於不可尋指輸入的影像格式。"

#: ../src/msw/registry.cpp:506
#, c-format
msgid "Can't close registry key '%s'"
msgstr "無法關閉登錄機碼 '%s'"

#: ../src/msw/registry.cpp:584
#, c-format
msgid "Can't copy values of unsupported type %d."
msgstr "無法複製不支援類型 %d 的值。"

#: ../src/msw/registry.cpp:487
#, c-format
msgid "Can't create registry key '%s'"
msgstr "無法建立登錄機碼 '%s'"

#: ../src/msw/thread.cpp:673
msgid "Can't create thread"
msgstr "無法建立執行緒"

#: ../src/msw/registry.cpp:776
#, c-format
msgid "Can't delete key '%s'"
msgstr "無法刪除機碼 '%s'"

#: ../src/msw/iniconf.cpp:458
#, c-format
msgid "Can't delete the INI file '%s'"
msgstr "無法刪除 INI 檔 '%s'"

#: ../src/msw/registry.cpp:804
#, c-format
msgid "Can't delete value '%s' from key '%s'"
msgstr "無法刪除機值 '%s' @ '%s'"

#: ../src/msw/registry.cpp:1170
#, c-format
msgid "Can't enumerate subkeys of key '%s'"
msgstr "無法列舉機碼 '%s' 的子機碼"

#: ../src/msw/registry.cpp:1131
#, c-format
msgid "Can't enumerate values of key '%s'"
msgstr "無法列舉機碼 '%s' 的值"

#: ../src/msw/registry.cpp:1388
#, c-format
msgid "Can't export value of unsupported type %d."
msgstr "無法匯出不支援類型 %d 的值。"

#: ../src/common/ffile.cpp:255
#, c-format
msgid "Can't find current position in file '%s'"
msgstr "無法在「%s」檔案中找到目前位置"

#: ../src/msw/registry.cpp:418
#, c-format
msgid "Can't get info about registry key '%s'"
msgstr "無法取得登錄機碼 '%s' 的資訊"

#: ../src/msw/webview_ie.cpp:939
#| msgid "Can't set thread priority"
msgid "Can't get the JavaScript object"
msgstr "無法取得 JavaScript 物件"

#: ../src/common/zstream.cpp:346
msgid "Can't initialize zlib deflate stream."
msgstr "無法初始化 zlib 壓縮資料流。"

#: ../src/common/zstream.cpp:185
msgid "Can't initialize zlib inflate stream."
msgstr "無法初始化 zlib 解壓資料流。"

#: ../src/msw/fswatcher.cpp:476
#, c-format
msgid "Can't monitor non-existent directory \"%s\" for changes."
msgstr "無法監視不存在的目錄「%s」是否有變更。"

#: ../src/msw/registry.cpp:454
#, c-format
msgid "Can't open registry key '%s'"
msgstr "無法開啟登錄機碼 '%s'"

#: ../src/common/zstream.cpp:252
#, c-format
msgid "Can't read from inflate stream: %s"
msgstr "無法讀取解壓資料流：%s"

#: ../src/common/zstream.cpp:244
msgid "Can't read inflate stream: unexpected EOF in underlying stream."
msgstr "無法讀取解壓資料流：資料流中有未預期的結尾。"

#: ../src/msw/registry.cpp:1063
#, c-format
msgid "Can't read value of '%s'"
msgstr "無法讀取 '%s' 的值"

#: ../src/msw/registry.cpp:877 ../src/msw/registry.cpp:909
#: ../src/msw/registry.cpp:974
#, c-format
msgid "Can't read value of key '%s'"
msgstr "無法讀取機碼 '%s' 的值"

#: ../src/msw/webview_ie.cpp:932
msgid "Can't run JavaScript script without a valid HTML document"
msgstr "需要有效 HTML 文件才能執行 JavaScript 文稿"

#: ../src/common/image.cpp:2630
#, c-format
msgid "Can't save image to file '%s': unknown extension."
msgstr "無法儲存圖像到「%s」檔案：不明的副檔名。"

#: ../src/generic/logg.cpp:573 ../src/generic/logg.cpp:976
msgid "Can't save log contents to file."
msgstr "無法將日誌內容儲存到檔案。"

#: ../src/msw/thread.cpp:637
msgid "Can't set thread priority"
msgstr "無法設定執行緒的優先等級"

#: ../src/msw/registry.cpp:895 ../src/msw/registry.cpp:937
#: ../src/msw/registry.cpp:1080
#, c-format
msgid "Can't set value of '%s'"
msgstr "無法設定 '%s' 的值"

#: ../src/unix/utilsunx.cpp:356
msgid "Can't write to child process's stdin"
msgstr "無法寫入子程序的標準輸入"

#: ../src/common/zstream.cpp:427
#, c-format
msgid "Can't write to deflate stream: %s"
msgstr "無法寫入壓縮資料流：%s"

#: ../src/common/filefn.cpp:1262
#, c-format
msgid "Cannot enumerate files '%s'"
msgstr "無法列舉檔案 '%s'"

#: ../src/msw/dir.cpp:263
#, c-format
msgid "Cannot enumerate files in directory '%s'"
msgstr "無法列舉「%s」目錄的檔案"

#: ../src/msw/dialup.cpp:522
#, c-format
msgid "Cannot find active dialup connection: %s"
msgstr "找不到連線中的撥號連線：%s"

#: ../src/msw/dialup.cpp:826
msgid "Cannot find the location of address book file"
msgstr "找不到通訊錄的檔案位置"

#: ../src/msw/ole/automtn.cpp:562
#, c-format
msgid "Cannot get an active instance of \"%s\""
msgstr "無法取得「%s」的作用中實體"

#: ../src/unix/threadpsx.cpp:1029
#, c-format
msgid "Cannot get priority range for scheduling policy %d."
msgstr "無法取得排程原則 %d 的優先等級範圍。"

#: ../src/unix/utilsunx.cpp:992
msgid "Cannot get the hostname"
msgstr "無法取得主機名稱"

#: ../src/unix/utilsunx.cpp:1028
msgid "Cannot get the official hostname"
msgstr "無法取得正式的主機名稱"

#: ../src/msw/dialup.cpp:927
msgid "Cannot hang up - no active dialup connection."
msgstr "無法掛斷—沒有連線中的撥號連線。"

#: ../include/wx/msw/ole/oleutils.h:51
msgid "Cannot initialize OLE"
msgstr "無法初始化 OLE"

#: ../src/common/socket.cpp:853
msgid "Cannot initialize sockets"
msgstr "無法初始化通訊端"

#: ../src/msw/volume.cpp:630
#, c-format
msgid "Cannot load icon from '%s'."
msgstr "無法從「%s」載入圖示。"

#: ../src/xrc/xmlres.cpp:361
#, c-format
msgid "Cannot load resources from '%s'."
msgstr "無法從「%s」檔案載入資源。"

#: ../src/xrc/xmlres.cpp:743
#, c-format
msgid "Cannot load resources from file '%s'."
msgstr "無法從「%s」檔案載入資源。"

#: ../src/html/htmlfilt.cpp:137
#, c-format
msgid "Cannot open HTML document: %s"
msgstr "無法開啟 HTML 文件：%s"

#: ../src/html/helpdata.cpp:663
#, c-format
msgid "Cannot open HTML help book: %s"
msgstr "無法開啟 HTML 說明書：%s"

#: ../src/html/helpdata.cpp:299
#, c-format
msgid "Cannot open contents file: %s"
msgstr "無法開啟目錄檔案： %s"

#: ../src/generic/dcpsg.cpp:1668
msgid "Cannot open file for PostScript printing!"
msgstr "無法開啟檔案進行 PostScript 列印！"

#: ../src/html/helpdata.cpp:313
#, c-format
msgid "Cannot open index file: %s"
msgstr "無法開啟索引檔： %s"

#: ../src/xrc/xmlres.cpp:725
#, c-format
msgid "Cannot open resources file '%s'."
msgstr "無法開啟資源檔「%s」。"

#: ../src/html/helpwnd.cpp:1535
msgid "Cannot print empty page."
msgstr "無法列印空頁面。"

#: ../src/msw/volume.cpp:518
#, c-format
msgid "Cannot read typename from '%s'!"
msgstr "無法從「%s」讀取類型名稱！"

#: ../src/msw/thread.cpp:910
#, c-format
msgid "Cannot resume thread %lx"
msgstr "無法恢復執行緒 %lx"

#: ../src/unix/threadpsx.cpp:1004
msgid "Cannot retrieve thread scheduling policy."
msgstr "無法取得執行緒排程原則。"

#: ../src/common/intl.cpp:366
#, c-format
msgid "Cannot set locale to language \"%s\"."
msgstr "無法將語言設定為「%s」。"

#: ../src/msw/thread.cpp:546 ../src/unix/threadpsx.cpp:833
msgid "Cannot start thread: error writing TLS."
msgstr "無法啟動執行緒：寫入「執行緒內部儲存區」時發生錯誤。"

#: ../src/msw/thread.cpp:880
#, c-format
msgid "Cannot suspend thread %lx"
msgstr "無法暫停執行緒 %lx"

#: ../src/msw/thread.cpp:802
msgid "Cannot wait for thread termination"
msgstr "無法等候執行緒終結"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:75
msgid "Capital"
msgstr "大寫"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:783
msgid "CaptionText"
msgstr "CaptionText"

#: ../src/html/helpwnd.cpp:534
msgid "Case sensitive"
msgstr "區分大小寫"

#: ../src/propgrid/manager.cpp:1528
msgid "Categorized Mode"
msgstr "已分類模式"

#: ../src/richtext/richtextbuffer.cpp:9968
msgid "Cell Properties"
msgstr "儲存格性質"

#: ../src/common/fmapbase.cpp:161
msgid "Celtic (ISO-8859-14)"
msgstr "凱爾特語 (ISO-8859-14)"

#: ../src/richtext/richtextindentspage.cpp:160
#: ../src/richtext/richtextliststylepage.cpp:349
msgid "Cen&tred"
msgstr "置中對齊(&T)"

#: ../src/common/stockitem.cpp:170
msgid "Centered"
msgstr "置中對齊"

#: ../src/common/fmapbase.cpp:149
msgid "Central European (ISO-8859-2)"
msgstr "中歐語系 (ISO-8859-2)"

#: ../src/richtext/richtextbulletspage.cpp:187
#: ../src/richtext/richtextliststylepage.cpp:250
msgid "Centre"
msgstr "置中對齊"

#: ../src/richtext/richtextindentspage.cpp:162
#: ../src/richtext/richtextindentspage.cpp:164
#: ../src/richtext/richtextliststylepage.cpp:351
#: ../src/richtext/richtextliststylepage.cpp:353
msgid "Centre text."
msgstr "置中對齊文字。"

#: ../src/richtext/richtextsizepage.cpp:287
msgid "Centred"
msgstr "中間"

#: ../src/richtext/richtextbulletspage.cpp:219
#: ../src/richtext/richtextliststylepage.cpp:280
msgid "Ch&oose..."
msgstr "選擇(&O)…"

#: ../src/richtext/richtextbuffer.cpp:4354
msgid "Change List Style"
msgstr "變更清單樣式"

#: ../src/richtext/richtextbuffer.cpp:3709
msgid "Change Object Style"
msgstr "變更物件樣式"

#: ../src/richtext/richtextbuffer.cpp:3982
#: ../src/richtext/richtextbuffer.cpp:8128
msgid "Change Properties"
msgstr "變更性質"

#: ../src/richtext/richtextbuffer.cpp:3526
msgid "Change Style"
msgstr "變更樣式"

#: ../src/common/fileconf.cpp:341
#, c-format
msgid "Changes won't be saved to avoid overwriting the existing file \"%s\""
msgstr "為了避免覆寫已有的「%s」檔案 ，將不會儲存變更。"

#: ../src/gtk/filedlg.cpp:87 ../src/gtk/filepicker.cpp:190
#, c-format
msgid "Changing current directory to \"%s\" failed"
msgstr "無法將目前目錄變更為「%s」"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1661
msgid "Character"
msgstr "字元"

#: ../src/richtext/richtextstyles.cpp:1063
msgid "Character styles"
msgstr "字元樣式"

#: ../src/richtext/richtextbulletspage.cpp:161
#: ../src/richtext/richtextbulletspage.cpp:163
#: ../src/richtext/richtextliststylepage.cpp:224
#: ../src/richtext/richtextliststylepage.cpp:226
msgid "Check to add a period after the bullet."
msgstr "勾選以在項目符號後加上半形句點。"

#: ../src/richtext/richtextbulletspage.cpp:175
#: ../src/richtext/richtextbulletspage.cpp:177
#: ../src/richtext/richtextliststylepage.cpp:238
#: ../src/richtext/richtextliststylepage.cpp:240
msgid "Check to add a right parenthesis."
msgstr "勾選以加上右括號。"

#: ../src/richtext/richtextborderspage.cpp:383
#: ../src/richtext/richtextborderspage.cpp:385
#: ../src/richtext/richtextborderspage.cpp:551
#: ../src/richtext/richtextborderspage.cpp:553
msgid "Check to edit all borders simultaneously."
msgstr "勾選以同時編輯所有邊框。"

#: ../src/richtext/richtextbulletspage.cpp:168
#: ../src/richtext/richtextbulletspage.cpp:170
#: ../src/richtext/richtextliststylepage.cpp:231
#: ../src/richtext/richtextliststylepage.cpp:233
msgid "Check to enclose the bullet in parentheses."
msgstr "勾選以將項目符號加上一對括號。"

#: ../src/richtext/richtextfontpage.cpp:315
#: ../src/richtext/richtextfontpage.cpp:317
msgid "Check to indicate right-to-left text layout."
msgstr "勾選以指明右至左文字配置。"

#: ../src/osx/carbon/fontdlg.cpp:356 ../src/osx/carbon/fontdlg.cpp:358
msgid "Check to make the font bold."
msgstr "勾選以設定為粗體。"

#: ../src/osx/carbon/fontdlg.cpp:363 ../src/osx/carbon/fontdlg.cpp:365
msgid "Check to make the font italic."
msgstr "勾選以設定為斜體。"

#: ../src/osx/carbon/fontdlg.cpp:372 ../src/osx/carbon/fontdlg.cpp:374
msgid "Check to make the font underlined."
msgstr "勾選以將字加底線。"

#: ../src/richtext/richtextstyledlg.cpp:289
#: ../src/richtext/richtextstyledlg.cpp:291
msgid "Check to restart numbering."
msgstr "勾選以重新編號。"

#: ../src/richtext/richtextfontpage.cpp:277
#: ../src/richtext/richtextfontpage.cpp:279
msgid "Check to show a line through the text."
msgstr "勾選以將字加上刪除線。"

#: ../src/richtext/richtextfontpage.cpp:284
#: ../src/richtext/richtextfontpage.cpp:286
msgid "Check to show the text in capitals."
msgstr "勾選以將字變成大寫。"

#: ../src/richtext/richtextfontpage.cpp:291
#: ../src/richtext/richtextfontpage.cpp:293
msgid "Check to show the text in small capitals."
msgstr "勾選以將字變成小型大寫字。"

#: ../src/richtext/richtextfontpage.cpp:305
#: ../src/richtext/richtextfontpage.cpp:307
msgid "Check to show the text in subscript."
msgstr "勾選以將字下標。"

#: ../src/richtext/richtextfontpage.cpp:298
#: ../src/richtext/richtextfontpage.cpp:300
msgid "Check to show the text in superscript."
msgstr "勾選以將字上標。"

#: ../src/richtext/richtextfontpage.cpp:322
#: ../src/richtext/richtextfontpage.cpp:324
msgid "Check to suppress hyphenation."
msgstr "勾選以抑制將同一英文字分行顯示。"

#: ../src/msw/dialup.cpp:762
msgid "Choose ISP to dial"
msgstr "選擇 ISP 進行撥號"

#: ../src/propgrid/props.cpp:1907
msgid "Choose a directory:"
msgstr "選擇目錄："

#: ../src/propgrid/props.cpp:2202
msgid "Choose a file"
msgstr "選擇檔案"

#: ../src/generic/colrdlgg.cpp:158 ../src/gtk/colordlg.cpp:52
msgid "Choose colour"
msgstr "選擇顏色"

#: ../src/generic/fontpickerg.cpp:50 ../src/gtk/fontdlg.cpp:77
#: ../src/gtk1/fontdlg.cpp:125
msgid "Choose font"
msgstr "選擇字型"

#: ../src/common/module.cpp:74
#, c-format
msgid "Circular dependency involving module \"%s\" detected."
msgstr "偵測到牽連出循環依存性的「%s」模組。"

#: ../src/aui/tabmdi.cpp:108 ../src/generic/mdig.cpp:97
msgid "Cl&ose"
msgstr "關閉(&O)"

#: ../src/msw/ole/automtn.cpp:684
msgid "Class not registered."
msgstr "類別未註冊。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:72 ../src/common/stockitem.cpp:147
msgid "Clear"
msgstr "清除"

#: ../src/generic/logg.cpp:514
msgid "Clear the log contents"
msgstr "清除日誌內容"

#: ../src/richtext/richtextstyledlg.cpp:252
#: ../src/richtext/richtextstyledlg.cpp:254
msgid "Click to apply the selected style."
msgstr "點擊以套用所選樣式。"

#: ../src/richtext/richtextbulletspage.cpp:220
#: ../src/richtext/richtextbulletspage.cpp:222
#: ../src/richtext/richtextliststylepage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:283
msgid "Click to browse for a symbol."
msgstr "點擊瀏覽該符號。"

#: ../src/osx/carbon/fontdlg.cpp:403 ../src/osx/carbon/fontdlg.cpp:405
msgid "Click to cancel changes to the font."
msgstr "點擊取消字型變更。"

#: ../src/generic/fontdlgg.cpp:472 ../src/generic/fontdlgg.cpp:491
msgid "Click to cancel the font selection."
msgstr "點擊取消字型選擇。"

#: ../src/osx/carbon/fontdlg.cpp:384 ../src/osx/carbon/fontdlg.cpp:386
msgid "Click to change the font colour."
msgstr "點擊變更字型顏色。"

#: ../src/richtext/richtextfontpage.cpp:267
#: ../src/richtext/richtextfontpage.cpp:269
msgid "Click to change the text background colour."
msgstr "點擊變更文字背景顏色。"

#: ../src/richtext/richtextfontpage.cpp:254
#: ../src/richtext/richtextfontpage.cpp:256
msgid "Click to change the text colour."
msgstr "點擊變更文字顏色。"

#: ../src/richtext/richtextliststylepage.cpp:195
#: ../src/richtext/richtextliststylepage.cpp:197
msgid "Click to choose the font for this level."
msgstr "點擊選擇此層級的字型。"

#: ../src/richtext/richtextstyledlg.cpp:279
#: ../src/richtext/richtextstyledlg.cpp:281
msgid "Click to close this window."
msgstr "點擊關閉視窗"

#: ../src/osx/carbon/fontdlg.cpp:410 ../src/osx/carbon/fontdlg.cpp:412
msgid "Click to confirm changes to the font."
msgstr "點擊確認字型變更。"

#: ../src/generic/fontdlgg.cpp:477 ../src/generic/fontdlgg.cpp:479
#: ../src/generic/fontdlgg.cpp:484 ../src/generic/fontdlgg.cpp:486
msgid "Click to confirm the font selection."
msgstr "點擊確認字型選擇。"

#: ../src/richtext/richtextstyledlg.cpp:244
#: ../src/richtext/richtextstyledlg.cpp:246
msgid "Click to create a new box style."
msgstr "點擊新增文字方塊樣式。"

#: ../src/richtext/richtextstyledlg.cpp:226
#: ../src/richtext/richtextstyledlg.cpp:228
msgid "Click to create a new character style."
msgstr "點擊新增字元樣式。"

#: ../src/richtext/richtextstyledlg.cpp:238
#: ../src/richtext/richtextstyledlg.cpp:240
msgid "Click to create a new list style."
msgstr "點擊新增清單樣式。"

#: ../src/richtext/richtextstyledlg.cpp:232
#: ../src/richtext/richtextstyledlg.cpp:234
msgid "Click to create a new paragraph style."
msgstr "點擊新增段落樣式。"

#: ../src/richtext/richtexttabspage.cpp:133
#: ../src/richtext/richtexttabspage.cpp:135
msgid "Click to create a new tab position."
msgstr "點擊新增定位點。"

#: ../src/richtext/richtexttabspage.cpp:145
#: ../src/richtext/richtexttabspage.cpp:147
msgid "Click to delete all tab positions."
msgstr "點擊刪除所有定位點。"

#: ../src/richtext/richtextstyledlg.cpp:270
#: ../src/richtext/richtextstyledlg.cpp:272
msgid "Click to delete the selected style."
msgstr "點擊刪除所選樣式。"

#: ../src/richtext/richtexttabspage.cpp:139
#: ../src/richtext/richtexttabspage.cpp:141
msgid "Click to delete the selected tab position."
msgstr "點擊刪除所選定位點。"

#: ../src/richtext/richtextstyledlg.cpp:264
#: ../src/richtext/richtextstyledlg.cpp:266
msgid "Click to edit the selected style."
msgstr "點擊編輯所選樣式。"

#: ../src/richtext/richtextstyledlg.cpp:258
#: ../src/richtext/richtextstyledlg.cpp:260
msgid "Click to rename the selected style."
msgstr "點擊重新命名所選樣式。"

#: ../src/aui/tabmdi.cpp:109 ../src/generic/mdig.cpp:98
msgid "Close All"
msgstr "全部關閉"

#: ../src/common/stockitem.cpp:269
msgid "Close current document"
msgstr "關閉當前文件"

#: ../src/generic/logg.cpp:516
msgid "Close this window"
msgstr "關閉視窗"

#. TRANSLATORS: Action for manipulating a tree control
#: ../src/generic/datavgen.cpp:6454
msgid "Collapse"
msgstr "摺疊"

#: ../src/richtext/richtextformatdlg.cpp:771
msgid "Colour"
msgstr "顏色"

#: ../src/msw/colordlg.cpp:230
#, c-format
msgid "Colour selection dialog failed with error %0lx."
msgstr "顏色選取對話框失敗，錯誤碼：%0lx。"

#: ../src/osx/carbon/fontdlg.cpp:380
msgid "Colour:"
msgstr "顏色："

#: ../src/generic/datavgen.cpp:6525
#, c-format
msgid "Column %u"
msgstr "欄位 %u"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:115
msgid "Command"
msgstr "指令"

#: ../src/common/init.cpp:196
#, c-format
msgid ""
"Command line argument %d couldn't be converted to Unicode and will be "
"ignored."
msgstr "由於指令列引數 %d 無法轉換為 Unicode 編碼，其將被忽略。"

#: ../src/msw/fontdlg.cpp:169
#, c-format
msgid "Common dialog failed with error code %0lx."
msgstr "共同對話視窗錯誤，錯誤碼 %0lx。"

#: ../src/gtk/window.cpp:5621
msgid ""
"Compositing not supported by this system, please enable it in your Window "
"Manager."
msgstr "這個系統不支援組合介面，請在視窗管理員啟用之。"

#: ../src/html/helpwnd.cpp:1552
msgid "Compressed HTML Help file (*.chm)|*.chm|"
msgstr "壓縮超文件說明檔 (*.chm)|*.chm|"

#: ../src/generic/dirctrlg.cpp:444
msgid "Computer"
msgstr "電腦"

#: ../src/common/fileconf.cpp:939
#, c-format
msgid "Config entry name cannot start with '%c'."
msgstr "設定項目名稱不能以 '%c' 開頭。"

#: ../src/generic/filedlgg.cpp:349 ../src/gtk/filedlg.cpp:60
msgid "Confirm"
msgstr "確認"

#: ../src/html/htmlwin.cpp:572
msgid "Connecting..."
msgstr "連線中…"

#: ../src/html/helpwnd.cpp:476
msgid "Contents"
msgstr "目錄"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:784
msgid "ControlDark"
msgstr "ControlDark"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:785
msgid "ControlLight"
msgstr "ControlLight"

#: ../src/common/strconv.cpp:2211
#, c-format
msgid "Conversion to charset '%s' doesn't work."
msgstr "無法轉換到「%s」字集。"

#: ../src/common/stockitem.cpp:149
msgid "Convert"
msgstr "轉換"

#: ../src/html/htmlwin.cpp:1016
#, c-format
msgid "Copied to clipboard:\"%s\""
msgstr "複製到剪貼簿：「%s」"

#: ../src/generic/prntdlgg.cpp:243
msgid "Copies:"
msgstr "份數："

#: ../src/common/stockitem.cpp:258
msgid "Copy selection"
msgstr "複製所選項目"

#: ../src/richtext/richtextborderspage.cpp:566
#: ../src/richtext/richtextborderspage.cpp:601
msgid "Corner"
msgstr "角位"

#: ../src/richtext/richtextborderspage.cpp:575
msgid "Corner &radius:"
msgstr "角位半徑(&R)："

#: ../src/html/chm.cpp:718
#, c-format
msgid "Could not create temporary file '%s'"
msgstr "無法建立暫存檔「%s」"

#: ../src/html/chm.cpp:273
#, c-format
msgid "Could not extract %s into %s: %s"
msgstr "無法將 %s 解壓至 %s： %s"

#: ../src/generic/tabg.cpp:1048
msgid "Could not find tab for id"
msgstr "找不到識別碼標籤"

#: ../src/html/chm.cpp:444
#, c-format
msgid "Could not locate file '%s'."
msgstr "找不到檔案 '%s'。"

#: ../src/common/filefn.cpp:1404
msgid "Could not set current working directory"
msgstr "無法設定目前工作目錄"

#: ../src/common/prntbase.cpp:2045
msgid "Could not start document preview."
msgstr "無法啟動文件預覽。"

#: ../src/generic/printps.cpp:162 ../src/gtk/print.cpp:1133
#: ../src/msw/printwin.cpp:187
msgid "Could not start printing."
msgstr "無法啟動列印。"

#: ../src/common/wincmn.cpp:2150
msgid "Could not transfer data to window"
msgstr "無法轉移資料到視窗中"

#: ../src/msw/dragimag.cpp:185 ../src/msw/dragimag.cpp:220
#: ../src/msw/imaglist.cpp:186 ../src/msw/imaglist.cpp:223
#: ../src/msw/imaglist.cpp:248
msgid "Couldn't add an image to the image list."
msgstr "無法把圖像加到圖像清單。"

#: ../src/msw/glcanvas.cpp:634 ../src/osx/glcanvas_osx.cpp:414
#: ../src/unix/glx11.cpp:559
msgid "Couldn't create OpenGL context"
msgstr "無法建立 OpenGL 脈絡"

#: ../src/msw/timer.cpp:134
msgid "Couldn't create a timer"
msgstr "無法建立計時器"

#: ../src/osx/carbon/overlay.cpp:122
msgid "Couldn't create the overlay window"
msgstr "無法建立覆蓋視窗"

#: ../src/common/translation.cpp:2076
msgid "Couldn't enumerate translations"
msgstr "無法列舉翻譯"

#: ../src/common/dynlib.cpp:120
#, c-format
msgid "Couldn't find symbol '%s' in a dynamic library"
msgstr "在動態函式庫找不到「%s」符號"

#: ../src/msw/thread.cpp:937
msgid "Couldn't get the current thread pointer"
msgstr "無法取得目前執行緒指標"

#: ../src/osx/carbon/overlay.cpp:129
msgid "Couldn't init the context on the overlay window"
msgstr "無法初始化覆蓋視窗的內容"

#: ../src/common/imaggif.cpp:244
msgid "Couldn't initialize GIF hash table."
msgstr "無法初始化 GIF 雜湊表。"

#: ../src/common/imagpng.cpp:440
msgid "Couldn't load a PNG image - file is corrupted or not enough memory."
msgstr "無法載入 PNG 圖像 — 檔案損壞或是沒有足夠記憶體。"

#: ../src/unix/sound.cpp:462
#, c-format
msgid "Couldn't load sound data from '%s'."
msgstr "無法從「%s」載入聲音資料。"

#: ../src/msw/dirdlg.cpp:438
msgid "Couldn't obtain folder name"
msgstr "無法取得資料夾名稱"

#: ../src/unix/sound_sdl.cpp:229
#, c-format
msgid "Couldn't open audio: %s"
msgstr "無法開啟音訊：「%s」"

#: ../src/msw/ole/dataobj.cpp:377
#, c-format
msgid "Couldn't register clipboard format '%s'."
msgstr "無法註冊剪貼簿格式「%s」。"

#: ../src/msw/listctrl.cpp:939
#, c-format
msgid "Couldn't retrieve information about list control item %d."
msgstr "無法取得清單控制元件中細項 %d 的資訊。"

#: ../src/common/imagpng.cpp:514 ../src/common/imagpng.cpp:525
#: ../src/common/imagpng.cpp:535
msgid "Couldn't save PNG image."
msgstr "無法儲存 PNG 圖像。"

#: ../src/msw/thread.cpp:692
msgid "Couldn't terminate thread"
msgstr "無法終止執行緒"

#: ../src/common/xtistrm.cpp:166
#, c-format
msgid "Create Parameter %s not found in declared RTTI Parameters"
msgstr "宣告的 RTTI 參數中沒發現建立的參數 %s"

#: ../src/generic/dirdlgg.cpp:288
msgid "Create directory"
msgstr "建立目錄"

#: ../src/generic/dirdlgg.cpp:111 ../src/generic/filedlgg.cpp:212
msgid "Create new directory"
msgstr "建立新目錄"

#: ../src/common/stockitem.cpp:267
#| msgid "Create new directory"
msgid "Create new document"
msgstr "建立新文件"

#: ../src/xrc/xmlres.cpp:2518
#, c-format
msgid "Creating %s \"%s\" failed."
msgstr "無法建立 %s 「%s」。"

#: ../src/common/accelcmn.cpp:350
msgid "Ctrl+"
msgstr "Ctrl+"

#: ../src/common/stockitem.cpp:151 ../src/msw/textctrl.cpp:2722
#: ../src/osx/textctrl_osx.cpp:584 ../src/richtext/richtextctrl.cpp:334
msgid "Cu&t"
msgstr "剪下(&T)"

#: ../src/generic/filectrlg.cpp:940
msgid "Current directory:"
msgstr "目前目錄："

#: ../src/gtk/print.cpp:215
msgid "Custom size"
msgstr "自訂大小"

#: ../src/common/headerctrlcmn.cpp:61
msgid "Customize Columns"
msgstr "自訂欄位"

#: ../src/common/stockitem.cpp:259
msgid "Cut selection"
msgstr "剪下所選項目"

#: ../src/common/fmapbase.cpp:152
msgid "Cyrillic (ISO-8859-5)"
msgstr "斯拉夫語系 (ISO-8859-5)"

#: ../src/common/paper.cpp:99
msgid "D sheet, 22 x 34 in"
msgstr "D 印刷紙，22 x 34 英吋"

#: ../src/msw/dde.cpp:701
msgid "DDE poke request failed"
msgstr "「動態資料交換」資料傳送請求失敗"

#: ../src/common/imagbmp.cpp:1184
msgid "DIB Header: Encoding doesn't match bitdepth."
msgstr "DIB 標頭：編碼與顏色位元數不吻合。"

#: ../src/common/imagbmp.cpp:1077
msgid "DIB Header: Image height > 32767 pixels for file."
msgstr "DIB 標頭：圖像高度大於 32767 個像素。"

#: ../src/common/imagbmp.cpp:1069
msgid "DIB Header: Image width > 32767 pixels for file."
msgstr "DIB 標頭：圖像寬度大於 32767 個像素。"

#: ../src/common/imagbmp.cpp:1097
msgid "DIB Header: Unknown bitdepth in file."
msgstr "DIB 標頭：不明的顏色位元數。"

#: ../src/common/imagbmp.cpp:1152
msgid "DIB Header: Unknown encoding in file."
msgstr "DIB 標頭：不明的編碼型態。"

#: ../src/common/paper.cpp:121
msgid "DL Envelope, 110 x 220 mm"
msgstr "DL 信封，110 x 220 公釐"

#: ../src/richtext/richtextborderspage.cpp:613
msgid "Dashed"
msgstr "虛線"

#: ../src/generic/dbgrptg.cpp:304
#, c-format
msgid "Debug report \"%s\""
msgstr "除錯報告 \"%s\""

#: ../src/common/debugrpt.cpp:214
msgid "Debug report couldn't be created."
msgstr "無法建立除錯報告。"

#: ../src/common/debugrpt.cpp:557
msgid "Debug report generation has failed."
msgstr "無法產生除錯報告。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:84
msgid "Decimal"
msgstr "小數點"

#: ../src/generic/fontdlgg.cpp:323
msgid "Decorative"
msgstr "修飾"

#: ../src/common/fmapbase.cpp:796
msgid "Default encoding"
msgstr "預設編碼"

#: ../src/generic/prntdlgg.cpp:506
msgid "Default printer"
msgstr "預設印表機"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:51
msgid "Del"
msgstr "Del"

#: ../src/richtext/richtexttabspage.cpp:144
msgid "Delete A&ll"
msgstr "全部刪除(&L)"

#: ../src/richtext/richtextbuffer.cpp:11343
msgid "Delete Column"
msgstr "刪除欄位"

#: ../src/richtext/richtextbuffer.cpp:11293
msgid "Delete Row"
msgstr "刪除橫列"

#: ../src/richtext/richtextstyledlg.cpp:782
msgid "Delete Style"
msgstr "刪除樣式"

#: ../src/richtext/richtextctrl.cpp:1349 ../src/richtext/richtextctrl.cpp:1588
msgid "Delete Text"
msgstr "刪除文字"

#: ../src/generic/editlbox.cpp:150
msgid "Delete item"
msgstr "刪除項目"

#: ../src/common/stockitem.cpp:260
msgid "Delete selection"
msgstr "刪除所選項目"

#: ../src/richtext/richtextstyledlg.cpp:782
#, c-format
msgid "Delete style %s?"
msgstr "是否刪除樣式 %s？"

#: ../src/unix/snglinst.cpp:301
#, c-format
msgid "Deleted stale lock file '%s'."
msgstr "已刪除過時的鎖定檔案「%s」。"

#: ../src/common/secretstore.cpp:224
#, c-format
#| msgid "Deleting password for \"%s/%s\" failed: %s."
msgid "Deleting password for \"%s\" failed: %s."
msgstr "未能刪除「%s」的密碼：%s"

# "相依性「%s」的模組「%s」不存在。"
#: ../src/common/module.cpp:124
#, c-format
msgid "Dependency \"%s\" of module \"%s\" doesn't exist."
msgstr "「%2$s」依存的「%1$s」模組不存在。"

#: ../src/common/stockitem.cpp:196
msgid "Descending"
msgstr "遞減"

#. TRANSLATORS: Keyword of system colour
#: ../src/generic/dirctrlg.cpp:526 ../src/propgrid/advprops.cpp:786
msgid "Desktop"
msgstr "桌面"

#: ../src/generic/aboutdlgg.cpp:70
msgid "Developed by "
msgstr "開發者："

#: ../src/generic/aboutdlgg.cpp:176
msgid "Developers"
msgstr "開發者"

#: ../src/msw/dialup.cpp:373
msgid ""
"Dial up functions are unavailable because the remote access service (RAS) is "
"not installed on this machine. Please install it."
msgstr "由於沒有安裝遠端存取服務（RAS），撥號功能無法使用。請先安裝。"

#: ../src/generic/tipdlg.cpp:211
msgid "Did you know..."
msgstr "您知道嗎…"

#: ../src/dfb/wrapdfb.cpp:63
#, c-format
msgid "DirectFB error %d occurred."
msgstr "發生 DirectFB %d 錯誤。"

#: ../src/motif/filedlg.cpp:219
msgid "Directories"
msgstr "目錄"

#: ../src/common/filefn.cpp:1184
#, c-format
msgid "Directory '%s' couldn't be created"
msgstr "無法建立「%s」目錄"

#: ../src/common/filefn.cpp:1198
#, c-format
msgid "Directory '%s' couldn't be deleted"
msgstr "無法刪除「%s」目錄"

#: ../src/generic/dirdlgg.cpp:204
msgid "Directory does not exist"
msgstr "目錄不存在"

#: ../src/generic/filectrlg.cpp:1399
msgid "Directory doesn't exist."
msgstr "目錄不存在。"

#: ../src/common/docview.cpp:453
msgid "Discard changes and reload the last saved version?"
msgstr "是否捨棄變更，並重新載入最後一次儲存的版本？"

#: ../src/html/helpwnd.cpp:503
msgid ""
"Display all index items that contain given substring. Search is case "
"insensitive."
msgstr "顯示包含該字串的所有索引項目。搜尋不區分大小寫。"

#: ../src/html/helpwnd.cpp:680
msgid "Display options dialog"
msgstr "顯示選項對話方塊"

#: ../src/html/helpwnd.cpp:323
msgid "Displays help as you browse the books on the left."
msgstr "當瀏覽書籍時，於左側顯示說明。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:86
msgid "Divide"
msgstr "/"

#: ../src/common/docview.cpp:529
#, c-format
msgid "Do you want to save changes to %s?"
msgstr "是否儲存對於 %s 的修改？"

#: ../src/common/prntbase.cpp:542
msgid "Document:"
msgstr "文件："

#: ../src/generic/aboutdlgg.cpp:73
msgid "Documentation by "
msgstr "文件撰寫者："

#: ../src/generic/aboutdlgg.cpp:180
msgid "Documentation writers"
msgstr "文件撰寫者"

#: ../src/common/sizer.cpp:2846
msgid "Don't Save"
msgstr "不儲存"

#: ../src/html/htmlwin.cpp:639
msgid "Done"
msgstr "完成"

#: ../src/generic/progdlgg.cpp:457 ../src/msw/progdlg.cpp:538
msgid "Done."
msgstr "完成。"

#: ../src/richtext/richtextborderspage.cpp:612
msgid "Dotted"
msgstr "點線"

#: ../src/richtext/richtextborderspage.cpp:614
msgid "Double"
msgstr "雙線"

#: ../src/common/paper.cpp:176
msgid "Double Japanese Postcard Rotated 148 x 200 mm"
msgstr "雙倍日式明信片(轉向) 148 x 200 mm"

#: ../src/common/xtixml.cpp:273
#, c-format
msgid "Doubly used id : %d"
msgstr "id 重複：%d"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:64 ../src/common/stockitem.cpp:153
#: ../src/generic/fdrepdlg.cpp:152
msgid "Down"
msgstr "下"

#: ../src/common/paper.cpp:100
msgid "E sheet, 34 x 44 in"
msgstr "E 紙張, 34 x 44 英吋"

#: ../src/unix/fswatcher_inotify.cpp:561
msgid "EOF while reading from inotify descriptor"
msgstr "讀取 inotify 描述子時遇到檔案結尾"

#: ../src/generic/editlbox.cpp:134
msgid "Edit item"
msgstr "編輯項目"

#: ../include/wx/generic/progdlgg.h:85
msgid "Elapsed time:"
msgstr "已過時間："

#: ../src/richtext/richtextsizepage.cpp:353
#: ../src/richtext/richtextsizepage.cpp:355
#: ../src/richtext/richtextsizepage.cpp:465
#: ../src/richtext/richtextsizepage.cpp:467
msgid "Enable the height value."
msgstr "啟用高度值。"

#: ../src/richtext/richtextsizepage.cpp:438
#: ../src/richtext/richtextsizepage.cpp:440
msgid "Enable the maximum width value."
msgstr "啟用最大寬度值。"

#: ../src/richtext/richtextsizepage.cpp:411
#: ../src/richtext/richtextsizepage.cpp:413
msgid "Enable the minimum height value."
msgstr "啟用最小高度值。"

#: ../src/richtext/richtextsizepage.cpp:384
#: ../src/richtext/richtextsizepage.cpp:386
msgid "Enable the minimum width value."
msgstr "啟用最小寬度值。"

#: ../src/richtext/richtextsizepage.cpp:319
#: ../src/richtext/richtextsizepage.cpp:321
msgid "Enable the width value."
msgstr "啟用寬度值。"

#: ../src/richtext/richtextsizepage.cpp:280
#: ../src/richtext/richtextsizepage.cpp:282
msgid "Enable vertical alignment."
msgstr "啟用垂直對齊。"

#: ../src/richtext/richtextbackgroundpage.cpp:162
#: ../src/richtext/richtextbackgroundpage.cpp:164
msgid "Enables a background colour."
msgstr "啟用背景顏色。"

#: ../src/richtext/richtextbackgroundpage.cpp:196
#: ../src/richtext/richtextbackgroundpage.cpp:198
msgid "Enables a shadow."
msgstr "啟用陰影。"

#: ../src/richtext/richtextbackgroundpage.cpp:300
#: ../src/richtext/richtextbackgroundpage.cpp:302
msgid "Enables the blur distance."
msgstr "啟用模糊距離。"

#: ../src/richtext/richtextbackgroundpage.cpp:260
#: ../src/richtext/richtextbackgroundpage.cpp:262
msgid "Enables the shadow colour."
msgstr "啟用陰影顏色。"

#: ../src/richtext/richtextbackgroundpage.cpp:327
#: ../src/richtext/richtextbackgroundpage.cpp:329
msgid "Enables the shadow opacity."
msgstr "啟用陰影混濁度。"

#: ../src/richtext/richtextbackgroundpage.cpp:273
#: ../src/richtext/richtextbackgroundpage.cpp:275
msgid "Enables the shadow spread."
msgstr "啟用陰影擴散。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:66
msgid "End"
msgstr "End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:55
msgid "Enter"
msgstr "Enter"

#: ../src/richtext/richtextstyledlg.cpp:934
msgid "Enter a box style name"
msgstr "輸入文字方塊樣式名稱"

#: ../src/richtext/richtextstyledlg.cpp:606
msgid "Enter a character style name"
msgstr "輸入字元樣式名稱"

#: ../src/richtext/richtextstyledlg.cpp:820
msgid "Enter a list style name"
msgstr "輸入清單樣式名稱"

#: ../src/richtext/richtextstyledlg.cpp:893
msgid "Enter a new style name"
msgstr "輸入新的樣式名稱"

#: ../src/richtext/richtextstyledlg.cpp:654
msgid "Enter a paragraph style name"
msgstr "輸入段落樣式名稱"

#: ../src/generic/dbgrptg.cpp:174
#, c-format
msgid "Enter command to open file \"%s\":"
msgstr "輸入指令以開啟「%s」檔案:"

#: ../src/generic/helpext.cpp:460
msgid "Entries found"
msgstr "找到的項目"

#: ../src/common/paper.cpp:142
msgid "Envelope Invite 220 x 220 mm"
msgstr "邀請信封 220 x 220 公釐"

#: ../src/common/config.cpp:469
#, c-format
msgid ""
"Environment variables expansion failed: missing '%c' at position %u in '%s'."
msgstr "環境變數擴充失敗:  '%c' 沒有出現在位置 %u / '%s'。"

#: ../src/unix/epolldispatcher.cpp:103
msgid "Error closing epoll descriptor"
msgstr "關閉 epoll 描述子時發生錯誤"

#: ../src/unix/fswatcher_kqueue.cpp:134
msgid "Error closing kqueue instance"
msgstr "關閉 kqueue 實體時發生錯誤"

#: ../src/common/filefn.cpp:1050
#, c-format
msgid "Error copying the file '%s' to '%s'."
msgstr "將「%s」檔案複製到「%s」時出錯"

#: ../src/generic/dirdlgg.cpp:222
msgid "Error creating directory"
msgstr "建立目錄錯誤"

#: ../src/common/imagbmp.cpp:1196
msgid "Error in reading image DIB."
msgstr "讀取圖像 DIB 時發生錯誤。"

#: ../src/propgrid/propgrid.cpp:6628
#, c-format
msgid "Error in resource: %s"
msgstr "資源錯誤：%s"

#: ../src/common/fileconf.cpp:426
msgid "Error reading config options."
msgstr "讀取設定選項時發生錯誤。"

#: ../src/gtk/webview_webkit2.cpp:1237 ../src/msw/webview_ie.cpp:972
#, c-format
msgid "Error running JavaScript: %s"
msgstr "執行 JavaScript 時發生錯誤：%s"

#: ../src/common/fileconf.cpp:1034
msgid "Error saving user configuration data."
msgstr "儲存使用者配置資料錯誤。"

#: ../src/gtk/print.cpp:724
msgid "Error while printing: "
msgstr "列印時發生錯誤: "

#: ../src/common/log.cpp:219
msgid "Error: "
msgstr "錯誤："

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:69
msgid "Esc"
msgstr "Esc"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:70
msgid "Escape"
msgstr "Esc"

#: ../src/common/fmapbase.cpp:150
msgid "Esperanto (ISO-8859-3)"
msgstr "世界語 (ISO-8859-3)"

#: ../include/wx/generic/progdlgg.h:86
msgid "Estimated time:"
msgstr "估計時間："

#: ../src/generic/dbgrptg.cpp:234
msgid "Executable files (*.exe)|*.exe|"
msgstr "可執行檔 (*.exe)|*.exe|"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:78 ../src/common/stockitem.cpp:155
msgid "Execute"
msgstr "執行"

#: ../src/msw/utilsexc.cpp:876
#, c-format
msgid "Execution of command '%s' failed"
msgstr "「%s」指令執行失敗"

#: ../src/common/paper.cpp:105
msgid "Executive, 7 1/4 x 10 1/2 in"
msgstr "Executive, 7 1/4 x 10 1/2 英吋"

#. TRANSLATORS: Action for manipulating a tree control
#: ../src/generic/datavgen.cpp:6457
msgid "Expand"
msgstr "展開"

#: ../src/msw/registry.cpp:1239
#, c-format
msgid ""
"Exporting registry key: file \"%s\" already exists and won't be overwritten."
msgstr "匯出註冊鍵: 已有「%s」檔案，無法覆寫。"

#: ../src/common/fmapbase.cpp:195
msgid "Extended Unix Codepage for Japanese (EUC-JP)"
msgstr "延伸的 Unix 日文頁碼 (EUC-JP)"

#: ../src/html/chm.cpp:725
#, c-format
msgid "Extraction of '%s' into '%s' failed."
msgstr "無法將「%s」解開至「%s」。"

#: ../src/common/accelcmn.cpp:262 ../src/common/accelcmn.cpp:361
msgid "F"
msgstr "F"

#. TRANSLATORS: Label of font face name
#: ../src/propgrid/advprops.cpp:585
msgid "Face Name"
msgstr "字體名稱"

#: ../src/unix/snglinst.cpp:269
msgid "Failed to access lock file."
msgstr "無法存取鎖定檔。"

#: ../src/gtk/font.cpp:572
#, c-format
#| msgid "Failed to read document from the file \"%s\"."
msgid "Failed to add custom font \"%s\"."
msgstr "無法加入「%s」自訂字型。"

#: ../src/unix/epolldispatcher.cpp:116
#, c-format
msgid "Failed to add descriptor %d to epoll descriptor %d"
msgstr "無法加入描述子 %d 至 epoll 描述子 %d"

#: ../src/msw/dib.cpp:489
#, c-format
msgid "Failed to allocate %luKb of memory for bitmap data."
msgstr "無法為點陣圖資料配置 %luKb 的記憶體。"

#: ../src/common/glcmn.cpp:115
msgid "Failed to allocate colour for OpenGL"
msgstr "無法為 OpenGL 分配顏色"

#: ../src/common/lzmastream.cpp:234
#| msgid "Failed to allocate colour for OpenGL"
msgid "Failed to allocate memory for LZMA compression."
msgstr "無法配置供 LZMA 壓縮的記憶體。"

#: ../src/common/lzmastream.cpp:124
#| msgid "Failed to allocate colour for OpenGL"
msgid "Failed to allocate memory for LZMA decompression."
msgstr "無法配置供 LZMA 解壓縮的記憶體。"

#: ../include/wx/unix/private/displayx11.h:89
msgid "Failed to change video mode"
msgstr "變更顯示模式失敗"

#: ../src/common/image.cpp:3311
#, c-format
msgid "Failed to check format of image file \"%s\"."
msgstr "無法確認圖片檔「%s」的格式。"

#: ../src/common/debugrpt.cpp:243
#, c-format
msgid "Failed to clean up debug report directory \"%s\""
msgstr "無法清理除錯報告目錄「%s」"

#: ../src/common/filename.cpp:193
msgid "Failed to close file handle"
msgstr "無法關閉檔案處理常式"

#: ../src/unix/snglinst.cpp:340
#, c-format
msgid "Failed to close lock file '%s'"
msgstr "無法關閉鎖定檔案「%s」"

#: ../src/msw/clipbrd.cpp:112
msgid "Failed to close the clipboard."
msgstr "無法關閉剪貼簿。"

#: ../src/x11/utils.cpp:173
#, c-format
msgid "Failed to close the display \"%s\""
msgstr "關閉「%s」顯示器時失敗"

#: ../src/msw/dialup.cpp:796
msgid "Failed to connect: missing username/password."
msgstr "連線失敗：缺少使用者名稱或密碼。"

#: ../src/msw/dialup.cpp:742
msgid "Failed to connect: no ISP to dial."
msgstr "連線失敗：沒有可撥號的 ISP。"

#: ../src/generic/logg.cpp:956
msgid "Failed to copy dialog contents to the clipboard."
msgstr "無法複製對話視窗內容至剪貼簿。"

#: ../src/msw/registry.cpp:692
#, c-format
msgid "Failed to copy registry value '%s'"
msgstr "無法複製登錄機值 '%s'"

#: ../src/msw/registry.cpp:701
#, c-format
msgid "Failed to copy the contents of registry key '%s' to '%s'."
msgstr "無法複製登錄機碼 '%s' 的內容到 '%s'。"

#: ../src/common/filefn.cpp:1016
#, c-format
msgid "Failed to copy the file '%s' to '%s'"
msgstr "無法複製「%s」檔案到「%s」"

#: ../src/msw/registry.cpp:679
#, c-format
msgid "Failed to copy the registry subkey '%s' to '%s'."
msgstr "複製註冊表子鍵 '%s'至 '%s'失敗。"

#: ../src/msw/dde.cpp:1137
msgid "Failed to create DDE string"
msgstr "無法建立「動態資料交換」字串"

#: ../src/msw/mdi.cpp:620
msgid "Failed to create MDI parent frame."
msgstr "無法建立 MDI 主框架。"

#: ../src/common/filename.cpp:1028
msgid "Failed to create a temporary file name"
msgstr "無法產生暫存檔的檔名"

#: ../src/msw/utilsexc.cpp:228
msgid "Failed to create an anonymous pipe"
msgstr "無法建立匿名管道"

#: ../src/msw/ole/automtn.cpp:522
#, c-format
msgid "Failed to create an instance of \"%s\""
msgstr "建立「%s」的執行實體時失敗"

#: ../src/msw/dde.cpp:435
#, c-format
msgid "Failed to create connection to server '%s' on topic '%s'"
msgstr "無法建立連線到「%s」伺服器的「%s」主旨"

#: ../src/msw/cursor.cpp:196
msgid "Failed to create cursor."
msgstr "無法建立游標。"

#: ../src/common/debugrpt.cpp:213
#, c-format
msgid "Failed to create directory \"%s\""
msgstr "無法建立「%s」目錄"

#: ../src/generic/dirdlgg.cpp:220
#, c-format
msgid ""
"Failed to create directory '%s'\n"
"(Do you have the required permissions?)"
msgstr ""
"無法建立「%s」目錄\n"
"(是否有足夠權限？)"

#: ../src/unix/epolldispatcher.cpp:84
msgid "Failed to create epoll descriptor"
msgstr "無法建立 epoll 描述子"

#: ../src/gtk/font.cpp:562
#| msgid "Failed to update user configuration file."
msgid "Failed to create font configuration object."
msgstr "無法建立字型設定物件。"

#: ../src/msw/mimetype.cpp:238
#, c-format
msgid "Failed to create registry entry for '%s' files."
msgstr "無法為「%s」檔案建立登錄項目。"

#: ../src/msw/fdrepdlg.cpp:409
#, c-format
msgid "Failed to create the standard find/replace dialog (error code %d)"
msgstr "無法建立標準的「尋找/取代」對話窗 (錯誤碼 %d)"

#: ../src/unix/wakeuppipe.cpp:52
msgid "Failed to create wake up pipe used by event loop."
msgstr "建立事件迴圈所用的喚醒管線時失敗。"

#: ../src/html/winpars.cpp:730
#, c-format
msgid "Failed to display HTML document in %s encoding"
msgstr "無法以 %s 編碼顯示 HTML 文件"

#: ../src/msw/clipbrd.cpp:124
msgid "Failed to empty the clipboard."
msgstr "無法清空剪貼簿。"

#: ../include/wx/unix/private/displayx11.h:65
msgid "Failed to enumerate video modes"
msgstr "無法列舉顯示模式"

#: ../src/msw/dde.cpp:720
msgid "Failed to establish an advise loop with DDE server"
msgstr "無法建立與「動態資料交換」伺服器溝通的連結"

#: ../src/msw/dialup.cpp:628 ../src/msw/dialup.cpp:862
#, c-format
msgid "Failed to establish dialup connection: %s"
msgstr "無法建立撥號連線：%s"

#: ../src/unix/utilsunx.cpp:616
#, c-format
msgid "Failed to execute '%s'\n"
msgstr "無法執行「%s」\n"

#: ../src/common/debugrpt.cpp:733
msgid "Failed to execute curl, please install it in PATH."
msgstr "無法執行 curl，請在 PATH 變數所指的目錄安裝 curl。"

#: ../src/msw/ole/automtn.cpp:505
#, c-format
msgid "Failed to find CLSID of \"%s\""
msgstr "找不到「%s」的 CLSID"

#: ../src/common/regex.cpp:431 ../src/common/regex.cpp:479
#, c-format
msgid "Failed to find match for regular expression: %s"
msgstr "找不到與正規運算式 '%s' 相符的字串"

#: ../src/msw/webview_ie.cpp:893
msgid "Failed to find web view emulation level in the registry"
msgstr "無法在登錄檔尋找網頁檢視模擬等級"

#: ../src/msw/dialup.cpp:694
#, c-format
msgid "Failed to get ISP names: %s"
msgstr "無法取得 ISP 名稱：%s"

#: ../src/msw/ole/automtn.cpp:574
#, c-format
msgid "Failed to get OLE automation interface for \"%s\""
msgstr "取得「%s」的 OLE 自動作業介面時失敗"

#: ../src/msw/clipbrd.cpp:711
msgid "Failed to get data from the clipboard"
msgstr "無法從剪貼簿取得資料"

#: ../src/common/time.cpp:226
msgid "Failed to get the local system time"
msgstr "無法取得本機電腦的時間"

#: ../src/common/filefn.cpp:1346
msgid "Failed to get the working directory"
msgstr "無法取得工作目錄"

#: ../src/univ/theme.cpp:114
msgid "Failed to initialize GUI: no built-in themes found."
msgstr "無法初始化圖形使用者介面：沒有找到內建的布景主題。"

#: ../src/common/lzmastream.cpp:238
#, c-format
msgid "Failed to initialize LZMA compression: unexpected error %u."
msgstr "無法初始化 LZMA 壓縮：未預期的錯誤 %u。"

#: ../src/common/lzmastream.cpp:128
#, c-format
msgid "Failed to initialize LZMA decompression: unexpected error %u."
msgstr "無法初始化 LZMA 解壓縮：未預期的錯誤 %u。"

#: ../src/msw/helpchm.cpp:63
msgid "Failed to initialize MS HTML Help."
msgstr "無法初始化 MS HTML Help。"

#: ../src/msw/glcanvas.cpp:1394
msgid "Failed to initialize OpenGL"
msgstr "無法初始化 OpenGL"

#: ../src/msw/dialup.cpp:857
#, c-format
msgid "Failed to initiate dialup connection: %s"
msgstr "無法初始撥號連線：%s"

#: ../src/gtk/textctrl.cpp:1150
msgid "Failed to insert text in the control."
msgstr "無法於控制項插入文字"

#: ../src/unix/snglinst.cpp:241
#, c-format
msgid "Failed to inspect the lock file '%s'"
msgstr "檢查上鎖檔案 '%s'失敗"

#: ../src/unix/appunix.cpp:182
msgid "Failed to install signal handler"
msgstr "無法安裝信號處理函式"

#: ../src/unix/threadpsx.cpp:1192
msgid ""
"Failed to join a thread, potential memory leak detected - please restart the "
"program"
msgstr "無法停止執行緒，偵測到潛在的記憶體流失 - 請重新啟動程式"

#: ../src/msw/utils.cpp:629
#, c-format
msgid "Failed to kill process %d"
msgstr "無法刪除程序 %d"

#: ../src/common/image.cpp:2510
#, c-format
msgid "Failed to load bitmap \"%s\" from resources."
msgstr "無法從資源載入「%s」位元圖。"

#: ../src/common/image.cpp:2519
#, c-format
msgid "Failed to load icon \"%s\" from resources."
msgstr "無法從資源載入「%s」圖示。"

#: ../src/common/iconbndl.cpp:227
#, c-format
msgid "Failed to load icons from resource '%s'."
msgstr "無法從「%s」資源載入圖示。"

#: ../src/common/iconbndl.cpp:201
#, c-format
msgid "Failed to load image %%d from file '%s'."
msgstr "無法載入 %%d 圖像自「%s」檔案。"

#: ../src/common/iconbndl.cpp:209
#, c-format
msgid "Failed to load image %d from stream."
msgstr "無法從串流載入 %d 圖像。"

#: ../src/common/image.cpp:2597 ../src/common/image.cpp:2616
#, c-format
msgid "Failed to load image from file \"%s\"."
msgstr "無法從「%s」檔案載入影像。"

#: ../src/msw/enhmeta.cpp:97
#, c-format
msgid "Failed to load metafile from file \"%s\"."
msgstr "從「%s」檔案讀取中繼檔案失敗。"

#: ../src/msw/volume.cpp:338
msgid "Failed to load mpr.dll."
msgstr "無法載入 mpr.dll。"

#: ../src/msw/utils.cpp:953
#, c-format
msgid "Failed to load resource \"%s\"."
msgstr "無法載入「%s」資源。"

#: ../src/common/dynlib.cpp:92
#, c-format
msgid "Failed to load shared library '%s'"
msgstr "無法載入「%s」共享函式庫"

#: ../src/osx/core/sound.cpp:143
#, c-format
msgid "Failed to load sound from \"%s\" (error %d)."
msgstr "無法從「%s」載入聲音 (錯誤 %d)。"

#: ../src/msw/utils.cpp:960
#, c-format
msgid "Failed to lock resource \"%s\"."
msgstr "無法鎖定「%s」資源。"

#: ../src/unix/snglinst.cpp:198
#, c-format
msgid "Failed to lock the lock file '%s'"
msgstr "無法鎖定「%s」鎖定檔案"

#: ../src/unix/epolldispatcher.cpp:136
#, c-format
msgid "Failed to modify descriptor %d in epoll descriptor %d"
msgstr "無法修改描述子 %d (於 epoll 描述子 %d)"

#: ../src/common/filename.cpp:2659
#, c-format
msgid "Failed to modify file times for '%s'"
msgstr "無法變更「%s」檔案的日期"

#: ../src/common/selectdispatcher.cpp:258
msgid "Failed to monitor I/O channels"
msgstr "監視輸入輸出頻道時失敗"

#: ../src/common/filename.cpp:176
#, c-format
msgid "Failed to open '%s' for reading"
msgstr "無法開啟「%s」為讀取模式"

#: ../src/common/filename.cpp:181
#, c-format
msgid "Failed to open '%s' for writing"
msgstr "無法開啟「%s」為寫入模式"

#: ../src/html/chm.cpp:141
#, c-format
msgid "Failed to open CHM archive '%s'."
msgstr "無法開啟「%s」CHM 檔。"

#: ../src/common/utilscmn.cpp:1143
#, c-format
msgid "Failed to open URL \"%s\" in default browser."
msgstr "無法在預設瀏覽器中開啟網址「%s」。"

#: ../src/common/hyperlnkcmn.cpp:136
#, c-format
#| msgid "Failed to open URL \"%s\" in default browser."
msgid "Failed to open URL \"%s\" in the default browser"
msgstr "無法在預設瀏覽器中開啟網址「%s」"

# c-format
#: ../include/wx/msw/private/fswatcher.h:92
#, c-format
msgid "Failed to open directory \"%s\" for monitoring."
msgstr "無法建立監看「%s」目錄"

#: ../src/x11/utils.cpp:192
#, c-format
msgid "Failed to open display \"%s\"."
msgstr "無法開啟顯示「%s」。"

#: ../src/common/filename.cpp:1063
msgid "Failed to open temporary file."
msgstr "無法開啟暫存檔。"

#: ../src/msw/clipbrd.cpp:91
msgid "Failed to open the clipboard."
msgstr "無法開啟剪貼簿。"

#: ../src/common/translation.cpp:1228
#, c-format
msgid "Failed to parse Plural-Forms: '%s'"
msgstr "無法解析眾數型式(Plural-Forms)：「%s」"

#: ../src/unix/mediactrl.cpp:1220
#, c-format
msgid "Failed to prepare playing \"%s\"."
msgstr "無法準備播放「%s」。"

#: ../src/msw/clipbrd.cpp:600
msgid "Failed to put data on the clipboard"
msgstr "無法存放資料到剪貼簿"

#: ../src/unix/snglinst.cpp:278
msgid "Failed to read PID from lock file."
msgstr "無法從鎖定的檔案讀出「程序識別碼(PID)」。"

#: ../src/common/fileconf.cpp:437
msgid "Failed to read config options."
msgstr "無法讀取設定選項。"

#: ../src/common/docview.cpp:679
#, c-format
msgid "Failed to read document from the file \"%s\"."
msgstr "無法從「%s」檔案讀取文件。"

#: ../src/dfb/evtloop.cpp:99
msgid "Failed to read event from DirectFB pipe"
msgstr "無法從 DirectFB 管線讀取事件"

#: ../src/unix/wakeuppipe.cpp:120
msgid "Failed to read from wake-up pipe"
msgstr "無法從喚醒管線讀取"

#: ../src/common/textfile.cpp:99
#, c-format
#| msgid "Failed to read document from the file \"%s\"."
msgid "Failed to read text file \"%s\"."
msgstr "無法讀取「%s」文字檔案。"

#: ../src/unix/utilsunx.cpp:684
msgid "Failed to redirect child process input/output"
msgstr "無法轉向子程序的「輸入/輸出」"

#: ../src/msw/utilsexc.cpp:701
msgid "Failed to redirect the child process IO"
msgstr "無法轉向子程序的「輸入/輸出」"

#: ../src/msw/dde.cpp:286
#, c-format
msgid "Failed to register DDE server '%s'"
msgstr "無法註冊「動態資料交換(DDE)」伺服器「%s」"

#: ../src/gtk/font.cpp:580
#| msgid "Failed to update user configuration file."
msgid "Failed to register font configuration using private fonts."
msgstr "無法使用私人字型註冊字型設定。"

#: ../src/common/fontmap.cpp:245
#, c-format
msgid "Failed to remember the encoding for the charset '%s'."
msgstr "無法記憶字集「%s」的編碼。"

#: ../src/common/debugrpt.cpp:231
#, c-format
msgid "Failed to remove debug report file \"%s\""
msgstr "無法移除除錯報告檔案「%s」"

#: ../src/unix/snglinst.cpp:328
#, c-format
msgid "Failed to remove lock file '%s'"
msgstr "無法移除鎖定檔案「%s」"

#: ../src/unix/snglinst.cpp:288
#, c-format
msgid "Failed to remove stale lock file '%s'."
msgstr "無法移除過時的鎖定檔案「%s」。"

#: ../src/msw/registry.cpp:529
#, c-format
msgid "Failed to rename registry value '%s' to '%s'."
msgstr "無法將登錄值 '%s' 更名為 '%s'。"

#: ../src/common/filefn.cpp:1123
#, c-format
msgid ""
"Failed to rename the file '%s' to '%s' because the destination file already "
"exists."
msgstr "目的檔案已存在，故無法將檔案「%s」重新命名為「%s」。"

#: ../src/msw/registry.cpp:634
#, c-format
msgid "Failed to rename the registry key '%s' to '%s'."
msgstr "無法將登錄機碼 '%s' 更名為 '%s'。"

#: ../src/msw/webview_ie.cpp:910
msgid "Failed to reset web view to standard emulation level"
msgstr "無法重設網頁檢視至標準模擬等級"

#: ../src/common/filename.cpp:2755
#, c-format
msgid "Failed to retrieve file times for '%s'"
msgstr "無法取得「%s」檔案的各項時間"

#: ../src/msw/dialup.cpp:467
msgid "Failed to retrieve text of RAS error message"
msgstr "無法取得 RAS 錯誤訊息的對應文字"

#: ../src/msw/clipbrd.cpp:748
msgid "Failed to retrieve the supported clipboard formats"
msgstr "無法取得支援的剪貼簿格式"

#: ../src/common/docview.cpp:650
#, c-format
msgid "Failed to save document to the file \"%s\"."
msgstr "無法將文件儲存至「%s」檔案。"

#: ../src/msw/dib.cpp:269
#, c-format
msgid "Failed to save the bitmap image to file \"%s\"."
msgstr "無法將點陣圖儲存至「%s」檔案。"

#: ../src/msw/dde.cpp:814
msgid "Failed to send DDE advise notification"
msgstr "無法傳送「動態資料交換(DDE)」連結通知訊息"

#: ../src/common/ftp.cpp:402
#, c-format
msgid "Failed to set FTP transfer mode to %s."
msgstr "無法設定檔案傳輸(FTP)模式為 %s。"

#: ../src/msw/clipbrd.cpp:427
msgid "Failed to set clipboard data."
msgstr "無法設定剪貼簿資料。"

#: ../src/unix/snglinst.cpp:181
#, c-format
msgid "Failed to set permissions on lock file '%s'"
msgstr "無法在鎖定檔案「%s」設定許可權限"

#: ../src/unix/utilsunx.cpp:673
msgid "Failed to set process priority"
msgstr "無法設定執行緒的優先等級"

#: ../src/common/file.cpp:588
msgid "Failed to set temporary file permissions"
msgstr "無法設定暫存檔的存取權限"

#: ../src/unix/threadpsx.cpp:1323
#, c-format
msgid "Failed to set thread concurrency level to %lu"
msgstr "無法設定執行緒的同時性等級為 %lu"

#: ../src/unix/threadpsx.cpp:1449
#, c-format
msgid "Failed to set thread priority %d."
msgstr "無法設定執行緒的優先等級為 %d。"

#: ../src/unix/utilsunx.cpp:788
msgid "Failed to set up non-blocking pipe, the program might hang."
msgstr "無法設置非阻斷管線，程式也許已經當掉。"

#: ../src/msw/webview_ie.cpp:902
msgid "Failed to set web view to modern emulation level"
msgstr "無法設定網頁檢視至現代模擬等級"

#: ../src/common/fs_mem.cpp:255
#, c-format
msgid "Failed to store image '%s' to memory VFS!"
msgstr "無法將「%s」圖像儲存到「記憶體虛擬檔案系統」！"

#: ../src/dfb/evtloop.cpp:171
msgid "Failed to switch DirectFB pipe to non-blocking mode"
msgstr "無法切換 DirectFB 管線到非阻斷模式"

#: ../src/unix/wakeuppipe.cpp:59
msgid "Failed to switch wake up pipe to non-blocking mode"
msgstr "無法切換喚醒管線到非阻斷模式"

#: ../src/unix/threadpsx.cpp:1630
msgid "Failed to terminate a thread."
msgstr "無法終止執行緒。"

#: ../src/msw/dde.cpp:739
msgid "Failed to terminate the advise loop with DDE server"
msgstr "無法終止與「動態資料交換(DDE)」伺服器溝通的連結"

#: ../src/msw/dialup.cpp:937
#, c-format
msgid "Failed to terminate the dialup connection: %s"
msgstr "無法終止撥號連線：%s"

#: ../src/common/filename.cpp:2674
#, c-format
msgid "Failed to touch the file '%s'"
msgstr "無法更新「%s」檔案的修改時間"

#: ../src/unix/snglinst.cpp:334
#, c-format
msgid "Failed to unlock lock file '%s'"
msgstr "無法解除鎖定檔案「%s」"

#: ../src/msw/dde.cpp:307
#, c-format
msgid "Failed to unregister DDE server '%s'"
msgstr "無法撤銷「動態資料交換(DDE)」伺服器「%s」的註冊"

#: ../src/unix/epolldispatcher.cpp:155
#, c-format
msgid "Failed to unregister descriptor %d from epoll descriptor %d"
msgstr "無法注銷描述子 %d (於 epoll 描述子 %d)"

#: ../src/common/fileconf.cpp:1011
msgid "Failed to update user configuration file."
msgstr "無法更新使用者設定檔案。"

#: ../src/common/debugrpt.cpp:746
#, c-format
msgid "Failed to upload the debug report (error code %d)."
msgstr "無法上傳除錯報告 (錯誤代號 %d)。"

#: ../src/unix/snglinst.cpp:168
#, c-format
msgid "Failed to write to lock file '%s'"
msgstr "無法寫入鎖定檔案「%s」"

#. TRANSLATORS: Name of Boolean false value
#: ../src/propgrid/propgrid.cpp:193
msgid "False"
msgstr "假"

#. TRANSLATORS: Label of font family
#: ../src/propgrid/advprops.cpp:607
msgid "Family"
msgstr "字族"

#: ../src/gtk/glcanvas.cpp:167
#| msgid "File error"
msgid "Fatal Error"
msgstr "嚴重錯誤"

#: ../src/common/stockitem.cpp:157
msgid "File"
msgstr "檔案"

#: ../src/common/docview.cpp:667
#, c-format
msgid "File \"%s\" could not be opened for reading."
msgstr "檔案「%s」無法開啟為讀取模式。"

#: ../src/common/docview.cpp:644
#, c-format
msgid "File \"%s\" could not be opened for writing."
msgstr "檔案「%s」無法開啟為寫入模式。"

#: ../src/generic/filedlgg.cpp:346 ../src/gtk/filedlg.cpp:57
#, c-format
msgid "File '%s' already exists, do you really want to overwrite it?"
msgstr "檔案「%s」已存在，是否要覆寫？"

#: ../src/common/filefn.cpp:1157
#, c-format
msgid "File '%s' couldn't be removed"
msgstr "無法移除「%s」檔案"

#: ../src/common/filefn.cpp:1140
#, c-format
msgid "File '%s' couldn't be renamed '%s'"
msgstr "檔案「%s」無法重新命名為「%s」"

#: ../src/common/textcmn.cpp:960 ../src/richtext/richtextctrl.cpp:3085
msgid "File couldn't be loaded."
msgstr "無法載入檔案。"

#: ../src/msw/filedlg.cpp:416
#, c-format
msgid "File dialog failed with error code %0lx."
msgstr "檔案對話視窗錯誤，錯誤碼 %0lx。"

#: ../src/common/docview.cpp:1786
msgid "File error"
msgstr "檔案錯誤"

#: ../src/generic/dirctrlg.cpp:588 ../src/generic/filectrlg.cpp:770
msgid "File name exists already."
msgstr "檔案名稱已存在。"

#: ../src/motif/filedlg.cpp:220
msgid "Files"
msgstr "檔案"

#: ../src/common/filefn.cpp:1592
#, c-format
msgid "Files (%s)"
msgstr "檔案 (%s)"

#: ../src/motif/filedlg.cpp:218
msgid "Filter"
msgstr "過濾器"

#: ../src/common/stockitem.cpp:262
msgid "Find and replace in document"
msgstr "在文件中尋找並取代"

#: ../src/common/stockitem.cpp:261
#| msgid "Open HTML document"
msgid "Find in document"
msgstr "在文件中尋找"

#: ../src/common/stockitem.cpp:158
#| msgid "Find"
msgid "Find..."
msgstr "尋找…"

#: ../src/common/stockitem.cpp:159
msgid "First"
msgstr "最前"

#: ../src/common/prntbase.cpp:1578
msgid "First page"
msgstr "第一頁"

#: ../src/richtext/richtextsizepage.cpp:521
msgid "Fixed"
msgstr "定寬"

#: ../src/html/helpwnd.cpp:1207
msgid "Fixed font:"
msgstr "定寬字型︰"

#: ../src/html/helpwnd.cpp:1270
msgid "Fixed size face.<br> <b>bold</b> <i>italic</i> "
msgstr "定寬大小字體<br> <b>粗體</b> <i>斜體</i> "

#: ../src/richtext/richtextsizepage.cpp:229
msgid "Floating"
msgstr "浮動"

#: ../src/common/stockitem.cpp:160
msgid "Floppy"
msgstr "軟碟"

#: ../src/common/paper.cpp:111
msgid "Folio, 8 1/2 x 13 in"
msgstr "對開紙(Folio)，8 1/2 x 13 英吋"

#: ../src/richtext/richtextfontpage.cpp:221
msgid "Font &weight:"
msgstr "字型粗細(&W)："

#: ../src/osx/fontutil.cpp:92
#, c-format
msgid ""
"Font file \"%s\" cannot be used as it is not inside the font directory \"%s"
"\"."
msgstr "「%s」字型檔因為不在「%s」字型目錄內而無法使用。"

#: ../src/msw/font.cpp:1135
#, c-format
#| msgid "File couldn't be loaded."
msgid "Font file \"%s\" couldn't be loaded"
msgstr "無法載入「%s」字型檔案"

#: ../src/osx/fontutil.cpp:84
#, c-format
#| msgid ": file does not exist!"
msgid "Font file \"%s\" doesn't exist."
msgstr "「%s」字型檔案不存在。"

#: ../src/html/helpwnd.cpp:1208
msgid "Font size:"
msgstr "字型大小："

#: ../src/richtext/richtextfontpage.cpp:208
msgid "Font st&yle:"
msgstr "字型樣式(&Y)："

#: ../src/osx/carbon/fontdlg.cpp:329
msgid "Font:"
msgstr "字型："

#: ../src/dfb/fontmgr.cpp:198
#, c-format
msgid "Fonts index file %s disappeared while loading fonts."
msgstr "字型索引檔 %s 在載入字型時不見了。"

#: ../src/unix/utilsunx.cpp:650
msgid "Fork failed"
msgstr "建立分支失敗"

#: ../src/common/stockitem.cpp:161
msgid "Forward"
msgstr "向前"

#: ../src/common/xtixml.cpp:235
msgid "Forward hrefs are not supported"
msgstr "不支援往前參照的超連結"

#: ../src/html/helpwnd.cpp:876
#, c-format
msgid "Found %i matches"
msgstr "找到 %i 個符合項目"

#: ../src/generic/prntdlgg.cpp:234
msgid "From:"
msgstr "從："

#: ../src/propgrid/advprops.cpp:1513
msgid "Fuchsia"
msgstr "Fuchsia"

#: ../src/common/imaggif.cpp:138
msgid "GIF: data stream seems to be truncated."
msgstr "GIF: 資料流似乎被截斷了。"

#: ../src/common/imaggif.cpp:128
msgid "GIF: error in GIF image format."
msgstr "GIF: GIF 圖像格式錯誤。"

#: ../src/common/imaggif.cpp:133
msgid "GIF: not enough memory."
msgstr "GIF: 記憶體不足。"

#: ../src/gtk/window.cpp:5603
msgid ""
"GTK+ installed on this machine is too old to support screen compositing, "
"please install GTK+ 2.12 or later."
msgstr ""
"安裝於這臺機器的 GTK+ 太舊而不支援螢幕組合，請安裝 GTK+2.12 或後續版本。"

#: ../src/univ/themes/gtk.cpp:525
msgid "GTK+ theme"
msgstr "GTK+ 布景主題"

#: ../src/common/prntbase.cpp:258
msgid "Generic PostScript"
msgstr "普通 PostScript"

#: ../src/common/paper.cpp:135
msgid "German Legal Fanfold, 8 1/2 x 13 in"
msgstr "德國法定複寫簿, 8 1/2 x 13 in"

#: ../src/common/paper.cpp:134
msgid "German Std Fanfold, 8 1/2 x 12 in"
msgstr "德國標準複寫簿, 8 1/2 x 12 in"

#: ../include/wx/xtiprop.h:184
msgid "GetProperty called w/o valid getter"
msgstr "呼叫GetProperty時未帶有效的getter"

#: ../include/wx/xtiprop.h:262
msgid "GetPropertyCollection called on a generic accessor"
msgstr "在一個通用處理器上呼叫GetPropertyCollection"

#: ../include/wx/xtiprop.h:202
msgid "GetPropertyCollection called w/o valid collection getter"
msgstr "呼叫GetPropertyCollection時未帶有效的collection getter"

#: ../src/html/helpwnd.cpp:661
msgid "Go back"
msgstr "退回"

#: ../src/html/helpwnd.cpp:662
msgid "Go forward"
msgstr "向前"

#: ../src/html/helpwnd.cpp:664
msgid "Go one level up in document hierarchy"
msgstr "到上一階文件層級"

#: ../src/generic/dirdlgg.cpp:116 ../src/generic/filedlgg.cpp:208
msgid "Go to home directory"
msgstr "前往家目錄"

#: ../src/generic/filedlgg.cpp:205
msgid "Go to parent directory"
msgstr "前往父目錄"

#: ../src/generic/aboutdlgg.cpp:76
msgid "Graphics art by "
msgstr "美術設計者："

#: ../src/propgrid/advprops.cpp:1508
msgid "Gray"
msgstr "灰色"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:787
msgid "GrayText"
msgstr "GrayText"

#: ../src/common/fmapbase.cpp:154
msgid "Greek (ISO-8859-7)"
msgstr "希臘文 (ISO-8859-7)"

#: ../src/propgrid/advprops.cpp:1509
msgid "Green"
msgstr "綠色"

#: ../src/generic/colrdlgg.cpp:342
msgid "Green:"
msgstr "綠色："

#: ../src/common/zstream.cpp:158 ../src/common/zstream.cpp:318
msgid "Gzip not supported by this version of zlib"
msgstr "這一版的 zlib 不支援 Gzip"

#: ../src/html/helpwnd.cpp:1550
msgid "HTML Help Project (*.hhp)|*.hhp|"
msgstr "超文件說明檔專案 (*.hhp)|*.hhp|"

#: ../src/html/htmlwin.cpp:687
#, c-format
msgid "HTML anchor %s does not exist."
msgstr "HTML 錨點 %s 不存在。"

#: ../src/html/helpwnd.cpp:1548
msgid "HTML files (*.html;*.htm)|*.html;*.htm|"
msgstr "超文件檔 (*.html;*.htm)|*.html;*.htm|"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1663
msgid "Hand"
msgstr "手掌"

#: ../src/common/stockitem.cpp:162
msgid "Harddisk"
msgstr "硬碟"

#: ../src/common/fmapbase.cpp:155
msgid "Hebrew (ISO-8859-8)"
msgstr "希伯來文 (ISO-8859-8)"

#: ../src/html/helpwnd.cpp:1201
msgid "Help Browser Options"
msgstr "說明瀏覽器選項"

#: ../src/generic/helpext.cpp:455 ../src/generic/helpext.cpp:456
msgid "Help Index"
msgstr "說明索引"

#: ../src/html/helpwnd.cpp:1532
msgid "Help Printing"
msgstr "說明列印"

#: ../src/html/helpwnd.cpp:802
msgid "Help Topics"
msgstr "輔助主題"

#: ../src/html/helpwnd.cpp:1549
msgid "Help books (*.htb)|*.htb|Help books (*.zip)|*.zip|"
msgstr "說明書 (*.htb)|*.htb|說明書 (*.zip)|*.zip|"

#: ../src/generic/helpext.cpp:268
#, c-format
msgid "Help directory \"%s\" not found."
msgstr "找不到說明目錄「%s」。"

#: ../src/generic/helpext.cpp:276
#, c-format
msgid "Help file \"%s\" not found."
msgstr "找不到「%s」檔案。"

#: ../src/html/helpctrl.cpp:63
#, c-format
msgid "Help: %s"
msgstr "說明：%s"

#: ../src/osx/menu_osx.cpp:466
#, c-format
msgid "Hide %s"
msgstr "隱藏 %s"

#: ../src/osx/menu_osx.cpp:468
msgid "Hide Others"
msgstr "隱藏其他"

#: ../src/generic/infobar.cpp:84
msgid "Hide this notification message."
msgstr "隱藏這個通知訊息。"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:788
msgid "Highlight"
msgstr "Highlight"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:789
msgid "HighlightText"
msgstr "HighlightText"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:65 ../src/common/stockitem.cpp:164
msgid "Home"
msgstr "Home"

#: ../src/generic/dirctrlg.cpp:524
msgid "Home directory"
msgstr "家目錄"

#: ../src/richtext/richtextsizepage.cpp:253
#: ../src/richtext/richtextsizepage.cpp:255
msgid "How the object will float relative to the text."
msgstr "物件與文字之間的相對位置。"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1664
msgid "I-Beam"
msgstr "工字"

#: ../src/common/imagbmp.cpp:1211
msgid "ICO: Error in reading mask DIB."
msgstr "ICO：讀取遮罩式 DIB 時發生錯誤。"

#: ../src/common/imagbmp.cpp:1305 ../src/common/imagbmp.cpp:1405
#: ../src/common/imagbmp.cpp:1420 ../src/common/imagbmp.cpp:1431
#: ../src/common/imagbmp.cpp:1445 ../src/common/imagbmp.cpp:1493
#: ../src/common/imagbmp.cpp:1508 ../src/common/imagbmp.cpp:1522
#: ../src/common/imagbmp.cpp:1533
msgid "ICO: Error writing the image file!"
msgstr "ICO：寫入圖像檔時發生錯誤！"

#: ../src/common/imagbmp.cpp:1270
msgid "ICO: Image too tall for an icon."
msgstr "ICO：圖像太高。"

#: ../src/common/imagbmp.cpp:1278
msgid "ICO: Image too wide for an icon."
msgstr "ICO：圖像太寬。"

#: ../src/common/imagbmp.cpp:1618
msgid "ICO: Invalid icon index."
msgstr "ICO：圖示索引無效。"

#: ../src/common/imagiff.cpp:758
msgid "IFF: data stream seems to be truncated."
msgstr "IFF：資料流似乎被截斷了。"

#: ../src/common/imagiff.cpp:742
msgid "IFF: error in IFF image format."
msgstr "IFF：IFF 圖像格式錯誤。"

#: ../src/common/imagiff.cpp:745
msgid "IFF: not enough memory."
msgstr "IFF：記憶體不足。"

#: ../src/common/imagiff.cpp:748
msgid "IFF: unknown error!!!"
msgstr "IFF：不明的錯誤！！！"

#: ../src/common/fmapbase.cpp:197
msgid "ISO-2022-JP"
msgstr "ISO-2022-JP"

#: ../src/html/htmprint.cpp:297
msgid ""
"If possible, try changing the layout parameters to make the printout more "
"narrow."
msgstr "儘量嘗試變更版面配置參數，讓列印輸出更窄。"

#: ../src/generic/dbgrptg.cpp:365
msgid ""
"If you have any additional information pertaining to this bug\n"
"report, please enter it here and it will be joined to it:"
msgstr ""
"如果有任何與此錯誤報告有關的資訊, \n"
"請在此輸入，其會被加到錯誤報告："

#: ../src/generic/dbgrptg.cpp:327
msgid ""
"If you wish to suppress this debug report completely, please choose the "
"\"Cancel\" button,\n"
"but be warned that it may hinder improving the program, so if\n"
"at all possible please do continue with the report generation.\n"
msgstr ""
"如果想完全停用除錯報告，請按「取消」按鈕，\n"
"但不建議這樣做，因為除錯報告有助於改善本程式。\n"
"如果可以，請盡量選擇讓程式產生除錯報告。\n"

#: ../src/common/zipstrm.cpp:1046
msgid "Ignoring malformed extra data record, ZIP file may be corrupted"
msgstr "忽略格式錯誤的延伸資料記錄，ZIP 檔案可能損壞"

#: ../src/msw/registry.cpp:1404
#, c-format
msgid "Ignoring value \"%s\" of the key \"%s\"."
msgstr "忽略「%s」值 (「%s」鍵)。"

#: ../src/common/xtistrm.cpp:295
msgid "Illegal Object Class (Non-wxEvtHandler) as Event Source"
msgstr "作為事件來源的物件類別(非-wxEvtHandler)不合規範"

#: ../src/common/xti.cpp:513
msgid "Illegal Parameter Count for ConstructObject Method"
msgstr "針對ConstructObject方法的參數計數不合規範"

#: ../src/common/xti.cpp:501
msgid "Illegal Parameter Count for Create Method"
msgstr "針對Create方法的參數計數不合規範"

#: ../src/generic/dirctrlg.cpp:570 ../src/generic/filectrlg.cpp:756
msgid "Illegal directory name."
msgstr "目錄名稱不合規範。"

#: ../src/generic/filectrlg.cpp:1367
msgid "Illegal file specification."
msgstr "檔案描述不合規範。"

#: ../src/common/image.cpp:2278
msgid "Image and mask have different sizes."
msgstr "圖像和遮罩的大小不一致。"

#: ../src/common/image.cpp:2756
#, c-format
msgid "Image file is not of type %d."
msgstr "影像檔不是 %d 類型。"

#: ../src/common/image.cpp:2910
#, c-format
msgid "Image is not of type %s."
msgstr "影像不是 %s 類型。"

#: ../src/msw/textctrl.cpp:512
msgid ""
"Impossible to create a rich edit control, using simple text control instead. "
"Please reinstall riched32.dll"
msgstr ""
"無法建立 rich edit 控制元件，使用 simple text 控制元件代替。請重新安裝 "
"riched32.dll"

#: ../src/unix/utilsunx.cpp:306
msgid "Impossible to get child process input"
msgstr "無法取得子程序的輸入"

#: ../src/common/filefn.cpp:1029
#, c-format
msgid "Impossible to get permissions for file '%s'"
msgstr "無法取得「%s」檔案的存取權限"

#: ../src/common/filefn.cpp:1043
#, c-format
msgid "Impossible to overwrite the file '%s'"
msgstr "無法覆寫「%s」檔案"

#: ../src/common/filefn.cpp:1098
#, c-format
msgid "Impossible to set permissions for the file '%s'"
msgstr "無法設定「%s」檔案的存取權限"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:790
msgid "InactiveBorder"
msgstr "InactiveBorder"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:791
msgid "InactiveCaption"
msgstr "InactiveCaption"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:792
msgid "InactiveCaptionText"
msgstr "InactiveCaptionText"

#: ../src/common/gifdecod.cpp:829
#, c-format
msgid "Incorrect GIF frame size (%u, %d) for the frame #%u"
msgstr "GIF 影格大小 (%u, %d) 不正確 (用於影格 #%u)"

#: ../src/msw/ole/automtn.cpp:635
msgid "Incorrect number of arguments."
msgstr "引數數量不正確。"

#: ../src/common/stockitem.cpp:165
msgid "Indent"
msgstr "縮排"

#: ../src/richtext/richtextformatdlg.cpp:345
msgid "Indents && Spacing"
msgstr "縮排與間距"

#: ../src/common/stockitem.cpp:166 ../src/html/helpwnd.cpp:516
msgid "Index"
msgstr "索引"

#: ../src/common/fmapbase.cpp:159
msgid "Indian (ISO-8859-12)"
msgstr "印度語系 (ISO-8859-12)"

#: ../src/common/init.cpp:287
msgid "Initialization failed in post init, aborting."
msgstr "安裝後續的啟始失敗，將會忽略。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:54
msgid "Ins"
msgstr "Ins"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:53 ../src/richtext/richtextsymboldlg.cpp:472
msgid "Insert"
msgstr "Ins"

#: ../src/richtext/richtextbuffer.cpp:8066
msgid "Insert Field"
msgstr "插入欄位"

#: ../src/richtext/richtextbuffer.cpp:7977
#: ../src/richtext/richtextbuffer.cpp:8937
msgid "Insert Image"
msgstr "插入圖片"

#: ../src/richtext/richtextbuffer.cpp:8024
msgid "Insert Object"
msgstr "插入物件"

#: ../src/richtext/richtextbuffer.cpp:7821
#: ../src/richtext/richtextbuffer.cpp:7851
#: ../src/richtext/richtextbuffer.cpp:7893
#: ../src/richtext/richtextctrl.cpp:1290 ../src/richtext/richtextctrl.cpp:1498
msgid "Insert Text"
msgstr "插入文字"

#: ../src/richtext/richtextindentspage.cpp:295
#: ../src/richtext/richtextindentspage.cpp:297
msgid "Inserts a page break before the paragraph."
msgstr "在段落前插入換頁符號。"

#: ../src/richtext/richtextborderspage.cpp:617
msgid "Inset"
msgstr "內縮"

#: ../src/common/imagtiff.cpp:311
msgid "Invalid TIFF image index."
msgstr "TIFF 圖像索引無效。"

#: ../src/common/appcmn.cpp:297
#, c-format
msgid "Invalid display mode specification '%s'."
msgstr "顯示模式規格「%s」無效。"

#: ../src/x11/app.cpp:127
#, c-format
msgid "Invalid geometry specification '%s'"
msgstr "幾何規格「%s」無效"

#: ../src/unix/fswatcher_inotify.cpp:323
#, c-format
msgid "Invalid inotify event for \"%s\""
msgstr "inotify 事件「%s」無效"

#: ../src/unix/snglinst.cpp:312
#, c-format
msgid "Invalid lock file '%s'."
msgstr "鎖定檔案「%s」無效。"

#: ../src/common/translation.cpp:1169
msgid "Invalid message catalog."
msgstr "訊息分類無效。"

#: ../src/common/xtistrm.cpp:405 ../src/common/xtistrm.cpp:420
msgid "Invalid or Null Object ID passed to GetObjectClassInfo"
msgstr "傳給GetObjectClassInfo的物件ID無效或是空的"

#: ../src/common/xtistrm.cpp:435
msgid "Invalid or Null Object ID passed to HasObjectClassInfo"
msgstr "傳給HasObjectClassInfo的物件ID無效或是空的"

#: ../src/common/regex.cpp:310
#, c-format
msgid "Invalid regular expression '%s': %s"
msgstr "正規運算式「%s」無效： %s"

#: ../src/common/config.cpp:226
#, c-format
msgid "Invalid value %ld for a boolean key \"%s\" in config file."
msgstr "設定檔的 %ld 值 (對應到布林 \"%s\") 無效。"

#: ../src/common/stockitem.cpp:168 ../src/generic/fontdlgg.cpp:329
#: ../src/osx/carbon/fontdlg.cpp:361 ../src/richtext/richtextfontpage.cpp:351
msgid "Italic"
msgstr "斜體"

#: ../src/common/paper.cpp:130
msgid "Italy Envelope, 110 x 230 mm"
msgstr "意大利信封，110 x 230 mm"

#: ../src/common/imagjpeg.cpp:260
msgid "JPEG: Couldn't load - file is probably corrupted."
msgstr "JPEG：無法載入 - 檔案也許已損壞。"

#: ../src/common/imagjpeg.cpp:439
msgid "JPEG: Couldn't save image."
msgstr "JPEG：無法儲存圖像。"

#: ../src/common/paper.cpp:163
msgid "Japanese Double Postcard 200 x 148 mm"
msgstr "日式雙倍明信片 200 x 148 公釐"

#: ../src/common/paper.cpp:167
msgid "Japanese Envelope Chou #3"
msgstr "日式信封 Chou #3"

#: ../src/common/paper.cpp:180
msgid "Japanese Envelope Chou #3 Rotated"
msgstr "日式信封 Chou #3 轉向"

#: ../src/common/paper.cpp:168
msgid "Japanese Envelope Chou #4"
msgstr "日式信封 Chou #4"

#: ../src/common/paper.cpp:181
msgid "Japanese Envelope Chou #4 Rotated"
msgstr "日式信封 Chou #4 轉向"

#: ../src/common/paper.cpp:165
msgid "Japanese Envelope Kaku #2"
msgstr "日式信封 Kaku #2"

#: ../src/common/paper.cpp:178
msgid "Japanese Envelope Kaku #2 Rotated"
msgstr "日式信封 Kaku #2 轉向"

#: ../src/common/paper.cpp:166
msgid "Japanese Envelope Kaku #3"
msgstr "日式信封 Kaku #3"

#: ../src/common/paper.cpp:179
msgid "Japanese Envelope Kaku #3 Rotated"
msgstr "日式信封 Kaku #3 轉向"

#: ../src/common/paper.cpp:185
msgid "Japanese Envelope You #4"
msgstr "日式信封 You #4"

#: ../src/common/paper.cpp:186
msgid "Japanese Envelope You #4 Rotated"
msgstr "日式信封 You #4 轉向"

#: ../src/common/paper.cpp:138
msgid "Japanese Postcard 100 x 148 mm"
msgstr "日式明信片 100 x 148 公釐"

#: ../src/common/paper.cpp:175
msgid "Japanese Postcard Rotated 148 x 100 mm"
msgstr "日式明信片轉向 148 x 100 公釐"

#: ../src/common/stockitem.cpp:171
msgid "Justified"
msgstr "分散對齊"

#: ../src/richtext/richtextindentspage.cpp:155
#: ../src/richtext/richtextindentspage.cpp:157
#: ../src/richtext/richtextliststylepage.cpp:344
#: ../src/richtext/richtextliststylepage.cpp:346
msgid "Justify text left and right."
msgstr "文字左右對齊。"

#: ../src/common/fmapbase.cpp:163
msgid "KOI8-R"
msgstr "KOI8-R"

#: ../src/common/fmapbase.cpp:164
msgid "KOI8-U"
msgstr "KOI8-U"

#: ../src/common/accelcmn.cpp:282 ../src/common/accelcmn.cpp:367
msgid "KP_"
msgstr "KP_"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:107
msgid "KP_Add"
msgstr "KP_Add"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:102
msgid "KP_Begin"
msgstr "KP_Begin"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:110
msgid "KP_Decimal"
msgstr "KP_Decimal"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:104
msgid "KP_Delete"
msgstr "KP_Delete"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:111
msgid "KP_Divide"
msgstr "KP_Divide"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:96
msgid "KP_Down"
msgstr "KP_Down"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:101
msgid "KP_End"
msgstr "KP_End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:91
msgid "KP_Enter"
msgstr "KP_Enter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:105
msgid "KP_Equal"
msgstr "KP_Equal"

#: ../src/common/accelcmn.cpp:279 ../src/common/accelcmn.cpp:364
msgid "KP_F"
msgstr "KP_F"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:92
msgid "KP_Home"
msgstr "KP_Home"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:103
msgid "KP_Insert"
msgstr "KP_Insert"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:93
msgid "KP_Left"
msgstr "KP_Left"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:106
msgid "KP_Multiply"
msgstr "KP_Multiply"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:100
msgid "KP_Next"
msgstr "KP_Next"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:98
msgid "KP_PageDown"
msgstr "KP_PageDown"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:97
msgid "KP_PageUp"
msgstr "KP_PageUp"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:99
msgid "KP_Prior"
msgstr "KP_Prior"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:95
msgid "KP_Right"
msgstr "KP_Right"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:108
msgid "KP_Separator"
msgstr "KP_Separator"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:89
msgid "KP_Space"
msgstr "KP_Space"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:109
msgid "KP_Subtract"
msgstr "KP_Subtract"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:90
msgid "KP_Tab"
msgstr "KP_Tab"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:94
msgid "KP_Up"
msgstr "KP_Up"

#: ../src/richtext/richtextindentspage.cpp:270
msgid "L&ine spacing:"
msgstr "列距(&I):"

#: ../src/common/lzmastream.cpp:353
#, c-format
msgid "LZMA compression error when flushing output: %s"
msgstr "排清輸出時發生 LZMA 壓縮錯誤：%s"

#: ../src/common/lzmastream.cpp:283
#, c-format
#| msgid "compression error"
msgid "LZMA compression error: %s"
msgstr "LZMA 壓縮錯誤：%s"

#: ../src/common/lzmastream.cpp:199
#, c-format
#| msgid "decompression error"
msgid "LZMA decompression error: %s"
msgstr "LZMA 解壓縮錯誤：%s"

#: ../src/common/stockitem.cpp:174
msgid "Last"
msgstr "最後"

#: ../src/common/prntbase.cpp:1602
msgid "Last page"
msgstr "最後一頁"

#: ../src/common/log.cpp:305
#, c-format
msgid "Last repeated message (\"%s\", %u time) wasn't output"
msgid_plural "Last repeated message (\"%s\", %u times) wasn't output"
msgstr[0] "最後一個重複的訊息 (「%s」, %u 次) 並無輸出"

#: ../src/common/paper.cpp:103
msgid "Ledger, 17 x 11 in"
msgstr "橫板紙(Ledger)，17 x 11 英吋"

#: ../src/richtext/richtextindentspage.cpp:204
#: ../src/richtext/richtextliststylepage.cpp:390
msgid "Left (&first line):"
msgstr "左(第一列)(&F):"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1665
msgid "Left Button"
msgstr "左鍵"

#: ../src/generic/prntdlgg.cpp:876
msgid "Left margin (mm):"
msgstr "左邊距(公釐[mm])："

#: ../src/richtext/richtextindentspage.cpp:141
#: ../src/richtext/richtextindentspage.cpp:143
#: ../src/richtext/richtextliststylepage.cpp:330
#: ../src/richtext/richtextliststylepage.cpp:332
msgid "Left-align text."
msgstr "文字向左對齊。"

#: ../src/common/paper.cpp:144
msgid "Legal Extra 9 1/2 x 15 in"
msgstr "美式長信紙(Legal)增大 9 1/2 x 15 英吋"

#: ../src/common/paper.cpp:96
msgid "Legal, 8 1/2 x 14 in"
msgstr "美式長信紙(Legal)，8 1/2 x 14 英吋"

#: ../src/common/paper.cpp:143
msgid "Letter Extra 9 1/2 x 12 in"
msgstr "美式信紙(Letter)增大 9 1/2 x 12 英吋"

#: ../src/common/paper.cpp:149
msgid "Letter Extra Transverse 9.275 x 12 in"
msgstr "美式信紙(Letter)增大橫向 9.275 x 12 英吋"

#: ../src/common/paper.cpp:152
msgid "Letter Plus 8 1/2 x 12.69 in"
msgstr "美式信紙(Letter)加長 8 1/2 x 12.69 英吋"

#: ../src/common/paper.cpp:169
msgid "Letter Rotated 11 x 8 1/2 in"
msgstr "美式信紙(Letter)轉向，11 x 8 1/2 英吋"

#: ../src/common/paper.cpp:101
msgid "Letter Small, 8 1/2 x 11 in"
msgstr "美式信紙(Letter)縮小，8 1/2 x 11 英吋"

#: ../src/common/paper.cpp:147
msgid "Letter Transverse 8 1/2 x 11 in"
msgstr "美式信紙(Letter)橫向 8 1/2 x 11 英吋"

#: ../src/common/paper.cpp:95
msgid "Letter, 8 1/2 x 11 in"
msgstr "美式信紙(Letter)，8 1/2 x 11 英吋"

#: ../src/generic/aboutdlgg.cpp:173
msgid "License"
msgstr "授權"

#: ../src/generic/fontdlgg.cpp:332
msgid "Light"
msgstr "細體"

#: ../src/propgrid/advprops.cpp:1517
msgid "Lime"
msgstr "青檸色"

#: ../src/generic/helpext.cpp:295
#, c-format
msgid "Line %lu of map file \"%s\" has invalid syntax, skipped."
msgstr "映射檔案「%2$s」的第 %1$lu 列語法無效，已略過。"

#: ../src/richtext/richtextliststylepage.cpp:444
msgid "Line spacing:"
msgstr "列距:"

#: ../src/html/chm.cpp:836
msgid "Link contained '//', converted to absolute link."
msgstr "連結包含 '//'，已轉換為絕對連結。"

#: ../src/richtext/richtextformatdlg.cpp:360
msgid "List Style"
msgstr "清單樣式"

#: ../src/richtext/richtextstyles.cpp:1064
msgid "List styles"
msgstr "清單樣式"

#: ../src/richtext/richtextfontpage.cpp:197
#: ../src/richtext/richtextfontpage.cpp:199
msgid "Lists font sizes in points."
msgstr "清單字型大小。"

#: ../src/richtext/richtextfontpage.cpp:190
#: ../src/richtext/richtextfontpage.cpp:192
msgid "Lists the available fonts."
msgstr "列出可用字型。"

#: ../src/common/fldlgcmn.cpp:340
#, c-format
msgid "Load %s file"
msgstr "載入 %s 檔案"

#: ../src/html/htmlwin.cpp:603
msgid "Loading : "
msgstr "載入中："

#: ../src/unix/snglinst.cpp:246
#, c-format
msgid "Lock file '%s' has incorrect owner."
msgstr "上鎖檔案「%s」沒有正確的所有者。"

#: ../src/unix/snglinst.cpp:251
#, c-format
msgid "Lock file '%s' has incorrect permissions."
msgstr "上鎖檔案「%s」沒有正確的權限。"

#: ../src/generic/logg.cpp:576
#, c-format
msgid "Log saved to the file '%s'."
msgstr "儲存日誌到「%s」檔案。"

#: ../src/richtext/richtextbulletspage.cpp:276
#: ../src/richtext/richtextliststylepage.cpp:484
msgid "Lower case letters"
msgstr "小寫字母"

#: ../src/richtext/richtextbulletspage.cpp:278
#: ../src/richtext/richtextliststylepage.cpp:486
msgid "Lower case roman numerals"
msgstr "小寫羅馬數字"

#: ../src/gtk/mdi.cpp:433 ../src/gtk1/mdi.cpp:431
msgid "MDI child"
msgstr "MDI 子視窗"

#: ../src/msw/helpchm.cpp:56
msgid ""
"MS HTML Help functions are unavailable because the MS HTML Help library is "
"not installed on this machine. Please install it."
msgstr ""
"由於未安裝 MS HTML Help 函示庫，導致 MS HTML Help 功能無法使用。請先安裝。"

#: ../src/univ/themes/win32.cpp:3754
msgid "Ma&ximize"
msgstr "最大化(&X)"

#: ../src/common/fmapbase.cpp:203
msgid "MacArabic"
msgstr "MacArabic"

#: ../src/common/fmapbase.cpp:222
msgid "MacArmenian"
msgstr "MacArmenian"

#: ../src/common/fmapbase.cpp:211
msgid "MacBengali"
msgstr "MacBengali"

#: ../src/common/fmapbase.cpp:217
msgid "MacBurmese"
msgstr "MacBurmese"

#: ../src/common/fmapbase.cpp:236
msgid "MacCeltic"
msgstr "MacCeltic"

#: ../src/common/fmapbase.cpp:227
msgid "MacCentralEurRoman"
msgstr "MacCentralEurRoman"

#: ../src/common/fmapbase.cpp:223
msgid "MacChineseSimp"
msgstr "Mac 簡體中文"

#: ../src/common/fmapbase.cpp:201
msgid "MacChineseTrad"
msgstr "Mac 正體中文"

#: ../src/common/fmapbase.cpp:233
msgid "MacCroatian"
msgstr "MacCroatian"

#: ../src/common/fmapbase.cpp:206
msgid "MacCyrillic"
msgstr "MacCyrillic"

#: ../src/common/fmapbase.cpp:207
msgid "MacDevanagari"
msgstr "MacDevanagari"

#: ../src/common/fmapbase.cpp:231
msgid "MacDingbats"
msgstr "MacDingbats"

#: ../src/common/fmapbase.cpp:226
msgid "MacEthiopic"
msgstr "MacEthiopic"

#: ../src/common/fmapbase.cpp:229
msgid "MacExtArabic"
msgstr "MacExtArabic"

#: ../src/common/fmapbase.cpp:237
msgid "MacGaelic"
msgstr "MacGaelic"

#: ../src/common/fmapbase.cpp:221
msgid "MacGeorgian"
msgstr "MacGeorgian"

#: ../src/common/fmapbase.cpp:205
msgid "MacGreek"
msgstr "MacGreek"

#: ../src/common/fmapbase.cpp:209
msgid "MacGujarati"
msgstr "MacGujarati"

#: ../src/common/fmapbase.cpp:208
msgid "MacGurmukhi"
msgstr "MacGurmukhi"

#: ../src/common/fmapbase.cpp:204
msgid "MacHebrew"
msgstr "MacHebrew"

#: ../src/common/fmapbase.cpp:234
msgid "MacIcelandic"
msgstr "MacIcelandic"

#: ../src/common/fmapbase.cpp:200
msgid "MacJapanese"
msgstr "MacJapanese"

#: ../src/common/fmapbase.cpp:214
msgid "MacKannada"
msgstr "MacKannada"

#: ../src/common/fmapbase.cpp:238
msgid "MacKeyboardGlyphs"
msgstr "MacKeyboardGlyphs"

#: ../src/common/fmapbase.cpp:218
msgid "MacKhmer"
msgstr "MacKhmer"

#: ../src/common/fmapbase.cpp:202
msgid "MacKorean"
msgstr "MacKorean"

#: ../src/common/fmapbase.cpp:220
msgid "MacLaotian"
msgstr "MacLaotian"

#: ../src/common/fmapbase.cpp:215
msgid "MacMalayalam"
msgstr "MacMalayalam"

#: ../src/common/fmapbase.cpp:225
msgid "MacMongolian"
msgstr "MacMongolian"

#: ../src/common/fmapbase.cpp:210
msgid "MacOriya"
msgstr "MacOriya"

#: ../src/common/fmapbase.cpp:199
msgid "MacRoman"
msgstr "MacRoman"

#: ../src/common/fmapbase.cpp:235
msgid "MacRomanian"
msgstr "MacRomanian"

#: ../src/common/fmapbase.cpp:216
msgid "MacSinhalese"
msgstr "MacSinhalese"

#: ../src/common/fmapbase.cpp:230
msgid "MacSymbol"
msgstr "MacSymbol"

#: ../src/common/fmapbase.cpp:212
msgid "MacTamil"
msgstr "MacTamil"

#: ../src/common/fmapbase.cpp:213
msgid "MacTelugu"
msgstr "MacTelugu"

#: ../src/common/fmapbase.cpp:219
msgid "MacThai"
msgstr "MacThai"

#: ../src/common/fmapbase.cpp:224
msgid "MacTibetan"
msgstr "MacTibetan"

#: ../src/common/fmapbase.cpp:232
msgid "MacTurkish"
msgstr "MacTurkish"

#: ../src/common/fmapbase.cpp:228
msgid "MacVietnamese"
msgstr "MacVietnamese"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1666
msgid "Magnifier"
msgstr "放大鏡"

#: ../src/propgrid/advprops.cpp:2047
msgid "Make a selection:"
msgstr "選取項目："

#: ../src/richtext/richtextformatdlg.cpp:370
#: ../src/richtext/richtextmarginspage.cpp:171
msgid "Margins"
msgstr "外邊距"

#: ../src/propgrid/advprops.cpp:1504
msgid "Maroon"
msgstr "栗子色"

#: ../src/generic/fdrepdlg.cpp:147
msgid "Match case"
msgstr "區分大小寫"

#: ../src/richtext/richtextsizepage.cpp:463
msgid "Max height:"
msgstr "最大高度："

#: ../src/richtext/richtextsizepage.cpp:436
msgid "Max width:"
msgstr "最大寬度："

#: ../src/unix/mediactrl.cpp:953
#, c-format
msgid "Media playback error: %s"
msgstr "媒體播放出錯：%s"

#: ../src/common/fs_mem.cpp:169
#, c-format
msgid "Memory VFS already contains file '%s'!"
msgstr "「記憶體虛擬檔案系統」已有「%s」檔案！"

#. TRANSLATORS: Name of keyboard key
#. TRANSLATORS: Keyword of system colour
#: ../src/common/accelcmn.cpp:73 ../src/propgrid/advprops.cpp:793
msgid "Menu"
msgstr "選單"

#: ../src/univ/themes/metal.cpp:168
msgid "Metal theme"
msgstr "金屬佈景主題"

#: ../src/msw/ole/automtn.cpp:652
msgid "Method or property not found."
msgstr "找不到方法或性質。"

#: ../src/univ/themes/win32.cpp:3752
msgid "Mi&nimize"
msgstr "最小化(&N)"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1667
msgid "Middle Button"
msgstr "中鍵"

#: ../src/richtext/richtextsizepage.cpp:409
msgid "Min height:"
msgstr "最小高度："

#: ../src/richtext/richtextsizepage.cpp:382
msgid "Min width:"
msgstr "最小寬度："

#: ../src/msw/ole/automtn.cpp:668
msgid "Missing a required parameter."
msgstr "缺少所需參數。"

#: ../src/generic/fontdlgg.cpp:324
msgid "Modern"
msgstr "現代"

#: ../src/common/module.cpp:133
#, c-format
msgid "Module \"%s\" initialization failed"
msgstr "「%s」模組初始化失敗"

#: ../src/common/paper.cpp:131
msgid "Monarch Envelope, 3 7/8 x 7 1/2 in"
msgstr "御用信封，3 7/8 x 7 1/2 英吋"

#: ../src/msw/fswatcher.cpp:143
msgid "Monitoring individual files for changes is not supported currently."
msgstr "目前不支援監控個別檔案是否有變更。"

#: ../src/generic/editlbox.cpp:163
msgid "Move down"
msgstr "下移"

#: ../src/generic/editlbox.cpp:158
msgid "Move up"
msgstr "上移"

#: ../src/richtext/richtextsizepage.cpp:682
#: ../src/richtext/richtextsizepage.cpp:684
msgid "Moves the object to the next paragraph."
msgstr "將物件移至下一個段落。"

#: ../src/richtext/richtextsizepage.cpp:676
#: ../src/richtext/richtextsizepage.cpp:678
msgid "Moves the object to the previous paragraph."
msgstr "將物件移至上一個段落。"

#: ../src/richtext/richtextbuffer.cpp:9966
msgid "Multiple Cell Properties"
msgstr "儲存格性質(多個)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:85
#| msgid "KP_Multiply"
msgid "Multiply"
msgstr "乘號鍵"

#: ../src/propgrid/advprops.cpp:1505
msgid "Navy"
msgstr "海軍藍"

#: ../src/common/stockitem.cpp:175
msgid "Network"
msgstr "網路"

#: ../src/common/stockitem.cpp:176
msgid "New"
msgstr "新增"

#: ../src/richtext/richtextstyledlg.cpp:243
msgid "New &Box Style..."
msgstr "新增文字方塊樣式(&B)…"

#: ../src/richtext/richtextstyledlg.cpp:225
msgid "New &Character Style..."
msgstr "新增字元樣式(&C)…"

#: ../src/richtext/richtextstyledlg.cpp:237
msgid "New &List Style..."
msgstr "新增清單樣式(&L)…"

#: ../src/richtext/richtextstyledlg.cpp:231
msgid "New &Paragraph Style..."
msgstr "新增段落樣式(&P)…"

#: ../src/richtext/richtextstyledlg.cpp:606
#: ../src/richtext/richtextstyledlg.cpp:611
#: ../src/richtext/richtextstyledlg.cpp:654
#: ../src/richtext/richtextstyledlg.cpp:659
#: ../src/richtext/richtextstyledlg.cpp:820
#: ../src/richtext/richtextstyledlg.cpp:825
#: ../src/richtext/richtextstyledlg.cpp:893
#: ../src/richtext/richtextstyledlg.cpp:901
#: ../src/richtext/richtextstyledlg.cpp:934
#: ../src/richtext/richtextstyledlg.cpp:939
msgid "New Style"
msgstr "新增樣式"

#: ../src/generic/editlbox.cpp:142
msgid "New item"
msgstr "新增項目"

#: ../src/generic/dirdlgg.cpp:297 ../src/generic/dirdlgg.cpp:307
#: ../src/generic/filectrlg.cpp:618 ../src/generic/filectrlg.cpp:627
msgid "NewName"
msgstr "新名稱"

#: ../src/common/prntbase.cpp:1597 ../src/html/helpwnd.cpp:666
msgid "Next page"
msgstr "下一頁"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1668
msgid "No Entry"
msgstr "禁止入內"

#: ../src/generic/animateg.cpp:150
#, c-format
msgid "No animation handler for type %ld defined."
msgstr "沒有定義 %ld 類型的動畫處理常式。"

#: ../src/dfb/bitmap.cpp:642 ../src/dfb/bitmap.cpp:676
#, c-format
msgid "No bitmap handler for type %d defined."
msgstr "沒有定義 %d 類型的點陣圖處理常式。"

#: ../src/common/utilscmn.cpp:1098
msgid "No default application configured for HTML files."
msgstr "沒有組配用於 HTML 檔案的預設應用程式。"

#: ../src/generic/helpext.cpp:446
msgid "No entries found."
msgstr "找不到項目。"

#: ../src/common/fontmap.cpp:421
#, c-format
msgid ""
"No font for displaying text in encoding '%s' found,\n"
"but an alternative encoding '%s' is available.\n"
"Do you want to use this encoding (otherwise you will have to choose another "
"one)?"
msgstr ""
"找不到「%s」編碼的字型，無法顯示文字。\n"
"但是系統有另一種編碼「%s」。\n"
"要使用該編碼嗎？(否則必須選擇另一種)"

#: ../src/common/fontmap.cpp:426
#, c-format
msgid ""
"No font for displaying text in encoding '%s' found.\n"
"Would you like to select a font to be used for this encoding\n"
"(otherwise the text in this encoding will not be shown correctly)?"
msgstr ""
"找不到「%s」編碼的字型，無法顯示文字。\n"
"要選擇對應這個編碼的字型嗎？\n"
"(否則此種編碼的文字無法正確顯示)"

#: ../src/generic/animateg.cpp:142
msgid "No handler found for animation type."
msgstr "沒有找到動畫類型處理常式。"

#: ../src/common/image.cpp:2738
msgid "No handler found for image type."
msgstr "沒有找到圖像類型處理常式。"

#: ../src/common/image.cpp:2746 ../src/common/image.cpp:2869
#: ../src/common/image.cpp:2935
#, c-format
msgid "No image handler for type %d defined."
msgstr "沒有定義 %d 類型的圖像處理常式。"

#: ../src/common/image.cpp:2901 ../src/common/image.cpp:2949
#, c-format
msgid "No image handler for type %s defined."
msgstr "沒有定義 %s 類型的圖像處理常式。"

#: ../src/html/helpwnd.cpp:859
msgid "No matching page found yet"
msgstr "尚未找到符合的頁面"

#: ../src/unix/sound.cpp:81
msgid "No sound"
msgstr "沒有聲音"

#: ../src/common/image.cpp:2286 ../src/common/image.cpp:2327
msgid "No unused colour in image being masked."
msgstr "圖像沒有被遮罩的未用顏色。"

#: ../src/common/image.cpp:3408
msgid "No unused colour in image."
msgstr "圖像沒有未用的顏色。"

#: ../src/generic/helpext.cpp:303
#, c-format
msgid "No valid mappings found in the file \"%s\"."
msgstr "在「%s」檔案找不到有效映射。"

#: ../src/common/fmapbase.cpp:157
msgid "Nordic (ISO-8859-10)"
msgstr "北歐語系 (ISO-8859-10)"

#: ../src/html/helpwnd.cpp:1264
msgid "Normal face<br>and <u>underlined</u>. "
msgstr "正常字體<br>且<u>加底線</u>。 "

#: ../src/html/helpwnd.cpp:1206
msgid "Normal font:"
msgstr "正常字型："

#: ../src/propgrid/props.cpp:1118
#, c-format
msgid "Not %s"
msgstr "非 %s"

#: ../include/wx/filename.h:578 ../include/wx/filename.h:583
msgid "Not available"
msgstr "無法提供"

#: ../src/richtext/richtextfontpage.cpp:358
msgid "Not underlined"
msgstr "未加底線"

#: ../src/common/paper.cpp:115
msgid "Note, 8 1/2 x 11 in"
msgstr "筆記簿，8 1/2 x 11 英吋"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:106
msgid "Num *"
msgstr "Num *"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:107
msgid "Num +"
msgstr "Num +"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:108
msgid "Num ,"
msgstr "Num ,"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:109
msgid "Num -"
msgstr "Num -"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:110
msgid "Num ."
msgstr "Num ."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:111
msgid "Num /"
msgstr "Num /"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:105
msgid "Num ="
msgstr "Num ="

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:102
msgid "Num Begin"
msgstr "Num Begin"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:104
msgid "Num Delete"
msgstr "Num Delete"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:96
msgid "Num Down"
msgstr "Num 下"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:101
msgid "Num End"
msgstr "Num End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:91
msgid "Num Enter"
msgstr "Num 輸入"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:92
msgid "Num Home"
msgstr "Num Home"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:103
msgid "Num Insert"
msgstr "Num Insert"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:87
msgid "Num Lock"
msgstr "Num Lock"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:98
msgid "Num Page Down"
msgstr "Num PgDn"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:97
msgid "Num Page Up"
msgstr "Num PgUp"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:95
msgid "Num Right"
msgstr "Num 右"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:89
msgid "Num Space"
msgstr "Num 空格"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:90
msgid "Num Tab"
msgstr "Num Tab"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:94
msgid "Num Up"
msgstr "Num 上"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:93
msgid "Num left"
msgstr "Num 左"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:87
msgid "Num_lock"
msgstr "Num_lock"

#: ../src/richtext/richtextbulletspage.cpp:279
#: ../src/richtext/richtextliststylepage.cpp:487
msgid "Numbered outline"
msgstr "大綱編號"

#: ../src/msw/ole/automtn.cpp:692
#, c-format
msgid "OLE Automation error in %s: %s"
msgstr "OLE 自動作業發生錯誤於 %s：%s"

#: ../include/wx/richtext/richtextimagedlg.h:37
msgid "Object Properties"
msgstr "物件性質"

#: ../src/msw/ole/automtn.cpp:660
msgid "Object implementation does not support named arguments."
msgstr "物件實作不支援具名引數。"

#: ../src/common/xtixml.cpp:264
msgid "Objects must have an id attribute"
msgstr "物件必須有 id 屬性"

#: ../src/propgrid/advprops.cpp:1510
msgid "Olive"
msgstr "橄欖色"

#: ../src/richtext/richtextbackgroundpage.cpp:325
msgid "Opaci&ty:"
msgstr "混濁度(&T)："

#: ../src/generic/colrdlgg.cpp:354
msgid "Opacity:"
msgstr "混濁度："

#: ../src/common/docview.cpp:1770 ../src/common/docview.cpp:1823
msgid "Open File"
msgstr "開啟檔案"

#: ../src/html/helpwnd.cpp:672 ../src/html/helpwnd.cpp:1555
msgid "Open HTML document"
msgstr "開啟 HTML 文件"

#: ../src/common/stockitem.cpp:268
#| msgid "Open HTML document"
msgid "Open an existing document"
msgstr "開啟現有文件"

#: ../src/generic/dbgrptg.cpp:163
#, c-format
msgid "Open file \"%s\""
msgstr "開啟「%s」檔案"

#: ../src/common/stockitem.cpp:179
msgid "Open..."
msgstr "開啟..."

#: ../src/msw/glcanvas.cpp:610 ../src/unix/glx11.cpp:513
msgid "OpenGL 3.0 or later is not supported by the OpenGL driver."
msgstr "本 OpenGL 驅動程式不支援 OpenGL 或更新版本。"

#: ../src/generic/dirctrlg.cpp:599 ../src/generic/dirdlgg.cpp:323
#: ../src/generic/filectrlg.cpp:642 ../src/generic/filectrlg.cpp:786
msgid "Operation not permitted."
msgstr "不容許的操作。"

#: ../src/common/cmdline.cpp:899
#, c-format
msgid "Option '%s' can't be negated"
msgstr "「%s」選項無法被打消"

#: ../src/common/cmdline.cpp:1063
#, c-format
msgid "Option '%s' requires a value."
msgstr "「%s」選項必須有值。"

#: ../src/common/cmdline.cpp:1146
#, c-format
msgid "Option '%s': '%s' cannot be converted to a date."
msgstr "「%s」選項：「%s」無法轉換成日期。"

#: ../src/generic/prntdlgg.cpp:614
msgid "Options"
msgstr "選項"

#: ../src/propgrid/advprops.cpp:1515
msgid "Orange"
msgstr "橙色"

#: ../src/generic/prntdlgg.cpp:611 ../src/generic/prntdlgg.cpp:865
msgid "Orientation"
msgstr "方向"

#: ../src/common/windowid.cpp:242
msgid "Out of window IDs.  Recommend shutting down application."
msgstr "Window ID 已用完，建議關閉應用程式。"

#: ../src/richtext/richtextborderspage.cpp:398
#: ../src/richtext/richtextborderspage.cpp:556
msgid "Outline"
msgstr "輪廓"

#: ../src/richtext/richtextborderspage.cpp:618
msgid "Outset"
msgstr "外貼"

#: ../src/msw/ole/automtn.cpp:656
msgid "Overflow while coercing argument values."
msgstr "強制變更引數值時發生溢位。"

#: ../src/common/imagpcx.cpp:459 ../src/common/imagpcx.cpp:482
msgid "PCX: couldn't allocate memory"
msgstr "PCX：無法配置記憶體"

#: ../src/common/imagpcx.cpp:458
msgid "PCX: image format unsupported"
msgstr "PCX：圖像格式不支援"

#: ../src/common/imagpcx.cpp:481
msgid "PCX: invalid image"
msgstr "PCX：圖像無效"

#: ../src/common/imagpcx.cpp:444
msgid "PCX: this is not a PCX file."
msgstr "PCX：不是 PCX 檔案。"

#: ../src/common/imagpcx.cpp:461 ../src/common/imagpcx.cpp:483
msgid "PCX: unknown error !!!"
msgstr "PCX：不明的錯誤！！！"

#: ../src/common/imagpcx.cpp:460
msgid "PCX: version number too low"
msgstr "PCX：版本太低"

#: ../src/common/imagpnm.cpp:92
msgid "PNM: Couldn't allocate memory."
msgstr "PNM：無法配置記憶體。"

#: ../src/common/imagpnm.cpp:74
msgid "PNM: File format is not recognized."
msgstr "PNM：檔案格式無法識別。"

#: ../src/common/imagpnm.cpp:114 ../src/common/imagpnm.cpp:137
#: ../src/common/imagpnm.cpp:159
msgid "PNM: File seems truncated."
msgstr "PNM：檔案似乎被截斷了。"

#: ../src/common/paper.cpp:187
msgid "PRC 16K 146 x 215 mm"
msgstr "中式 16開 146 x 215 公釐"

#: ../src/common/paper.cpp:200
msgid "PRC 16K Rotated"
msgstr "中式 16開 轉向"

#: ../src/common/paper.cpp:188
msgid "PRC 32K 97 x 151 mm"
msgstr "中式 32開 97 x 151 公釐"

#: ../src/common/paper.cpp:201
msgid "PRC 32K Rotated"
msgstr "中式 32開 轉向"

#: ../src/common/paper.cpp:189
msgid "PRC 32K(Big) 97 x 151 mm"
msgstr "中式 32開(大) 97 x 151 公釐"

#: ../src/common/paper.cpp:202
msgid "PRC 32K(Big) Rotated"
msgstr "中式 32開(大) 轉向"

#: ../src/common/paper.cpp:190
msgid "PRC Envelope #1 102 x 165 mm"
msgstr "中式信封 #1 102 x 165 公釐"

#: ../src/common/paper.cpp:203
msgid "PRC Envelope #1 Rotated 165 x 102 mm"
msgstr "中式信封 #1 轉向 165 x 102 公釐"

#: ../src/common/paper.cpp:199
msgid "PRC Envelope #10 324 x 458 mm"
msgstr "中式信封 #10 324 x 458 公釐"

#: ../src/common/paper.cpp:212
msgid "PRC Envelope #10 Rotated 458 x 324 mm"
msgstr "中式信封 #10 轉向 458 x 324 公釐"

#: ../src/common/paper.cpp:191
msgid "PRC Envelope #2 102 x 176 mm"
msgstr "中式信封 #2 102 x 176 公釐"

#: ../src/common/paper.cpp:204
msgid "PRC Envelope #2 Rotated 176 x 102 mm"
msgstr "中式信封 #2 轉向 176 x 102 公釐"

#: ../src/common/paper.cpp:192
msgid "PRC Envelope #3 125 x 176 mm"
msgstr "中式信封 #3 125 x 176 公釐"

#: ../src/common/paper.cpp:205
msgid "PRC Envelope #3 Rotated 176 x 125 mm"
msgstr "中式信封 #3 轉向 176 x 125 公釐"

#: ../src/common/paper.cpp:193
msgid "PRC Envelope #4 110 x 208 mm"
msgstr "中式信封 #4 110 x 208 公釐"

#: ../src/common/paper.cpp:206
msgid "PRC Envelope #4 Rotated 208 x 110 mm"
msgstr "中式信封 #4 轉向 208 x 110 公釐"

#: ../src/common/paper.cpp:194
msgid "PRC Envelope #5 110 x 220 mm"
msgstr "中式信封 #5 110 x 220 公釐"

#: ../src/common/paper.cpp:207
msgid "PRC Envelope #5 Rotated 220 x 110 mm"
msgstr "中式信封 #5 轉向 220 x 110 公釐"

#: ../src/common/paper.cpp:195
msgid "PRC Envelope #6 120 x 230 mm"
msgstr "中式信封 #6 120 x 230 公釐"

#: ../src/common/paper.cpp:208
msgid "PRC Envelope #6 Rotated 230 x 120 mm"
msgstr "中式信封 #6 轉向 230 x 120 公釐"

#: ../src/common/paper.cpp:196
msgid "PRC Envelope #7 160 x 230 mm"
msgstr "中式信封 #7 160 x 230 公釐"

#: ../src/common/paper.cpp:209
msgid "PRC Envelope #7 Rotated 230 x 160 mm"
msgstr "中式信封 #7 轉向 230 x 160 公釐"

#: ../src/common/paper.cpp:197
msgid "PRC Envelope #8 120 x 309 mm"
msgstr "中式信封 #8 120 x 309 公釐"

#: ../src/common/paper.cpp:210
msgid "PRC Envelope #8 Rotated 309 x 120 mm"
msgstr "中式信封 #8 轉向 309 x 120 公釐"

#: ../src/common/paper.cpp:198
msgid "PRC Envelope #9 229 x 324 mm"
msgstr "中式信封 #9 229 x 324 公釐"

#: ../src/common/paper.cpp:211
msgid "PRC Envelope #9 Rotated 324 x 229 mm"
msgstr "中式信封 #9 轉向 324 x 229 公釐"

#: ../src/richtext/richtextmarginspage.cpp:285
msgid "Padding"
msgstr "內邊距"

#: ../src/common/prntbase.cpp:2104
#, c-format
msgid "Page %d"
msgstr "第 %d 頁"

#: ../src/common/prntbase.cpp:2102
#, c-format
msgid "Page %d of %d"
msgstr "第 %d / %d 頁"

#: ../src/gtk/print.cpp:833
msgid "Page Setup"
msgstr "頁面設定"

#: ../src/common/prntbase.cpp:484 ../src/generic/prntdlgg.cpp:824
msgid "Page setup"
msgstr "頁面設定"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:58
msgid "PageDown"
msgstr "PgDn"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:57
msgid "PageUp"
msgstr "PgUp"

#: ../src/generic/prntdlgg.cpp:212
msgid "Pages"
msgstr "頁"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1669
msgid "Paint Brush"
msgstr "筆刷"

#: ../src/generic/prntdlgg.cpp:598 ../src/generic/prntdlgg.cpp:797
#: ../src/generic/prntdlgg.cpp:838 ../src/generic/prntdlgg.cpp:851
#: ../src/generic/prntdlgg.cpp:1048 ../src/generic/prntdlgg.cpp:1053
msgid "Paper size"
msgstr "紙張大小"

#: ../src/richtext/richtextstyles.cpp:1062
msgid "Paragraph styles"
msgstr "段落樣式"

#: ../src/common/xtistrm.cpp:465
msgid "Passing a already registered object to SetObject"
msgstr "傳入已註冊的物件給 SetObject"

#: ../src/common/xtistrm.cpp:476
msgid "Passing an unknown object to GetObject"
msgstr "傳入不明物件給 GetObject"

#: ../src/common/stockitem.cpp:263
msgid "Paste selection"
msgstr "貼上選取項目"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1670
msgid "Pencil"
msgstr "鉛筆"

#: ../src/richtext/richtextbulletspage.cpp:159
#: ../src/richtext/richtextliststylepage.cpp:222
msgid "Peri&od"
msgstr "週期(&O)"

#: ../src/generic/filectrlg.cpp:430
msgid "Permissions"
msgstr "允許"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:60
msgid "PgDn"
msgstr "PgDn"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:59
msgid "PgUp"
msgstr "PgUp"

#: ../src/richtext/richtextbuffer.cpp:12869
msgid "Picture Properties"
msgstr "圖片性質"

#: ../include/wx/unix/pipe.h:47
msgid "Pipe creation failed"
msgstr "無法建立管道"

#: ../src/gtk1/fontdlg.cpp:74
msgid "Please choose a valid font."
msgstr "請選擇有效字型。"

#: ../src/generic/filedlgg.cpp:357 ../src/gtk/filedlg.cpp:73
msgid "Please choose an existing file."
msgstr "請選擇已有檔案。"

#: ../src/html/helpwnd.cpp:801
msgid "Please choose the page to display:"
msgstr "請選擇要顯示的頁面:"

#: ../src/msw/dialup.cpp:763
msgid "Please choose which ISP do you want to connect to"
msgstr "請選擇要連線的 ISP"

#: ../src/common/headerctrlcmn.cpp:60
msgid "Please select the columns to show and define their order:"
msgstr "請選取欄位，以顯示並定義其排序："

#: ../src/common/prntbase.cpp:538
msgid "Please wait while printing..."
msgstr "列印中，請稍待..."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1671
msgid "Point Left"
msgstr "向左指"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1672
msgid "Point Right"
msgstr "向右指"

#. TRANSLATORS: Label of font point size
#: ../src/propgrid/advprops.cpp:575
msgid "Point Size"
msgstr "字點大小"

#: ../src/generic/prntdlgg.cpp:294
msgid "PostScript file"
msgstr "PostScript 文件"

#: ../src/osx/menu_osx.cpp:457
msgid "Preferences..."
msgstr "偏好設定..."

#: ../src/common/prntbase.cpp:546
msgid "Preparing"
msgstr "正在準備"

#: ../src/generic/fontdlgg.cpp:456 ../src/html/helpwnd.cpp:1223
#: ../src/osx/carbon/fontdlg.cpp:390
msgid "Preview:"
msgstr "預覽︰"

#: ../src/common/prntbase.cpp:1583 ../src/html/helpwnd.cpp:665
msgid "Previous page"
msgstr "上一頁"

#: ../include/wx/prntbase.h:403 ../src/common/docview.cpp:1265
msgid "Print Preview"
msgstr "預覽列印"

#: ../src/common/prntbase.cpp:2045 ../src/common/prntbase.cpp:2087
#: ../src/common/prntbase.cpp:2095
msgid "Print Preview Failure"
msgstr "預覽列印失敗"

#: ../src/generic/prntdlgg.cpp:220
msgid "Print Range"
msgstr "列印範圍"

#: ../src/generic/prntdlgg.cpp:445
msgid "Print Setup"
msgstr "列印設定"

#: ../src/generic/prntdlgg.cpp:617
msgid "Print in colour"
msgstr "彩色列印"

#: ../src/common/stockitem.cpp:182
msgid "Print previe&w..."
msgstr "預覽列印(&W)..."

#: ../src/common/docview.cpp:1259
msgid "Print preview creation failed."
msgstr "建立預覽列印失敗。"

#: ../src/common/stockitem.cpp:182
msgid "Print preview..."
msgstr "預覽列印..."

#: ../src/generic/prntdlgg.cpp:626
msgid "Print spooling"
msgstr "列印佇列中"

#: ../src/html/helpwnd.cpp:676
msgid "Print this page"
msgstr "列印本頁"

#: ../src/generic/prntdlgg.cpp:181
msgid "Print to File"
msgstr "列印到檔案"

#: ../src/common/stockitem.cpp:183
msgid "Print..."
msgstr "列印..."

#: ../src/generic/prntdlgg.cpp:629
msgid "Printer command:"
msgstr "印表機指令："

#: ../src/generic/prntdlgg.cpp:176
msgid "Printer options"
msgstr "印表機選項"

#: ../src/generic/prntdlgg.cpp:641
msgid "Printer options:"
msgstr "印表機選項："

#: ../src/generic/prntdlgg.cpp:912
msgid "Printer..."
msgstr "印表機…"

#: ../include/wx/richtext/richtextprint.h:163 ../src/common/prntbase.cpp:535
#: ../src/html/htmprint.cpp:292
msgid "Printing"
msgstr "列印"

#: ../src/common/prntbase.cpp:612
msgid "Printing "
msgstr "正在列印 "

#: ../src/common/prntbase.cpp:347
msgid "Printing Error"
msgstr "列印時發生錯誤"

#: ../src/common/prntbase.cpp:565
#, c-format
msgid "Printing page %d"
msgstr "正在列印第 %d 頁"

#: ../src/common/prntbase.cpp:570
#, c-format
msgid "Printing page %d of %d"
msgstr "正在列印第 %d 頁 (共 %d 頁)"

#: ../src/generic/printps.cpp:185
#, c-format
msgid "Printing page %d..."
msgstr "正在列印第 %d 頁…"

#: ../src/generic/printps.cpp:145
msgid "Printing..."
msgstr "列印中…"

#: ../include/wx/prntbase.h:267 ../include/wx/richtext/richtextprint.h:109
#: ../src/common/docview.cpp:2140
msgid "Printout"
msgstr "列印"

#: ../src/common/debugrpt.cpp:564
#, c-format
msgid ""
"Processing debug report has failed, leaving the files in \"%s\" directory."
msgstr "處理除錯報告失敗, 檔案儲存在「%s」目錄。"

#: ../src/common/stockitem.cpp:184
msgid "Properties"
msgstr "性質"

#: ../src/propgrid/manager.cpp:226
msgid "Property"
msgstr "性質"

#. TRANSLATORS: Caption of message box displaying any property error
#: ../src/propgrid/propgrid.cpp:3136 ../src/propgrid/propgrid.cpp:3273
msgid "Property Error"
msgstr "性質錯誤"

#: ../src/propgrid/advprops.cpp:1506
msgid "Purple"
msgstr "紫色"

#: ../src/common/paper.cpp:112
msgid "Quarto, 215 x 275 mm"
msgstr "四開，215 x 275 mm"

#: ../src/generic/logg.cpp:1016
msgid "Question"
msgstr "問題"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1673
msgid "Question Arrow"
msgstr "問題箭頭"

#: ../src/common/stockitem.cpp:156
msgid "Quit"
msgstr "結束"

#: ../src/common/stockitem.cpp:264
msgid "Quit this program"
msgstr "結束這個程式"

#: ../src/common/accelcmn.cpp:355
msgid "RawCtrl+"
msgstr "RawCtrl+"

#: ../src/common/ffile.cpp:109 ../src/common/ffile.cpp:134
#, c-format
msgid "Read error on file '%s'"
msgstr "讀取「%s」檔案時發生錯誤"

#: ../src/common/secretstore.cpp:201
#, c-format
#| msgid "Reading password for \"%s/%s\" failed: %s."
msgid "Reading password for \"%s\" failed: %s."
msgstr "讀取「%s」的密碼失敗：%s。"

#: ../src/propgrid/advprops.cpp:1514
msgid "Red"
msgstr "紅色"

#: ../src/generic/colrdlgg.cpp:339
msgid "Red:"
msgstr "紅色："

#: ../src/common/stockitem.cpp:265
msgid "Redo last action"
msgstr "重做最後一個動作"

#: ../src/common/stockitem.cpp:186
msgid "Refresh"
msgstr "重新整理"

#: ../src/msw/registry.cpp:626
#, c-format
msgid "Registry key '%s' already exists."
msgstr "登錄機碼 '%s' 已存在。"

#: ../src/msw/registry.cpp:595
#, c-format
msgid "Registry key '%s' does not exist, cannot rename it."
msgstr "登錄機碼 '%s' 不存在, 無法更名。"

#: ../src/msw/registry.cpp:727
#, c-format
msgid ""
"Registry key '%s' is needed for normal system operation,\n"
"deleting it will leave your system in unusable state:\n"
"operation aborted."
msgstr ""
"正常的系統操作需要登錄機碼 '%s'，\n"
"刪除它會使系統處於無法使用的狀態：\n"
"操作中斷。"

#: ../src/msw/registry.cpp:953
#, c-format
msgid "Registry value \"%s\" is not binary (but of type %s)"
msgstr "登錄機碼「%s」不是二進位 (但卻是 %s 類型)"

#: ../src/msw/registry.cpp:916
#, c-format
msgid "Registry value \"%s\" is not numeric (but of type %s)"
msgstr "登錄機碼「%s」不是數字 (但卻是 %s 類型)"

#: ../src/msw/registry.cpp:1002
#, c-format
msgid "Registry value \"%s\" is not text (but of type %s)"
msgstr "登錄機碼「%s」不是文字 (但卻是 %s 類型)"

#: ../src/msw/registry.cpp:521
#, c-format
msgid "Registry value '%s' already exists."
msgstr "登錄機值 '%s' 已存在。"

#: ../src/richtext/richtextsizepage.cpp:519
msgid "Relative"
msgstr "相對"

#: ../src/generic/helpext.cpp:459
msgid "Relevant entries:"
msgstr "相關項目："

#: ../include/wx/generic/progdlgg.h:87
msgid "Remaining time:"
msgstr "餘下時間："

#: ../src/richtext/richtextctrl.cpp:1566
msgid "Remove Bullet"
msgstr "移除項目符號"

#: ../src/html/helpwnd.cpp:434
msgid "Remove current page from bookmarks"
msgstr "從書籤移除目前頁面"

#: ../src/common/rendcmn.cpp:194
#, c-format
msgid "Renderer \"%s\" has incompatible version %d.%d and couldn't be loaded."
msgstr "潤算器「%s」是不相容的 %d.%d 版本，而且無法載入。"

#: ../src/richtext/richtextbuffer.cpp:4527
msgid "Renumber List"
msgstr "重新編號清單"

#: ../src/common/stockitem.cpp:188
#| msgid "Rep&lace"
msgid "Rep&lace..."
msgstr "取代(&L)…"

#: ../src/richtext/richtextctrl.cpp:3677
msgid "Replace"
msgstr "取代"

#: ../src/generic/fdrepdlg.cpp:182
msgid "Replace &all"
msgstr "全部取代(&A)"

#: ../src/generic/fdrepdlg.cpp:124
msgid "Replace with:"
msgstr "取代成："

#: ../src/common/stockitem.cpp:188
#| msgid "Replace"
msgid "Replace..."
msgstr "取代…"

#: ../src/common/valtext.cpp:187
msgid "Required information entry is empty."
msgstr "所需的資訊項目空白。"

#: ../src/common/translation.cpp:2027
#, c-format
msgid "Resource '%s' is not a valid message catalog."
msgstr "「%s」資源不是有效的訊息分類。"

#: ../src/gtk/webview_webkit.cpp:974
msgid "Retrieving JavaScript script output is not supported with WebKit v1"
msgstr "WebKit v1 不支援取得 JavaScript 文稿輸出"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:56
msgid "Return"
msgstr "輸入"

#: ../src/common/stockitem.cpp:189
msgid "Revert to Saved"
msgstr "還原為上次儲存的檔案"

#: ../src/richtext/richtextborderspage.cpp:616
msgid "Ridge"
msgstr "背脊"

#: ../src/richtext/richtextfontpage.cpp:313
msgid "Rig&ht-to-left"
msgstr "右至左(&H)"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1658
msgid "Right Arrow"
msgstr "右箭頭"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1674
msgid "Right Button"
msgstr "右鍵"

#: ../src/generic/prntdlgg.cpp:888
msgid "Right margin (mm):"
msgstr "右邊距(公釐)："

#: ../src/richtext/richtextindentspage.cpp:148
#: ../src/richtext/richtextindentspage.cpp:150
#: ../src/richtext/richtextliststylepage.cpp:337
#: ../src/richtext/richtextliststylepage.cpp:339
msgid "Right-align text."
msgstr "文字向右對齊。"

#: ../src/generic/fontdlgg.cpp:322
msgid "Roman"
msgstr "羅馬"

#: ../src/generic/datavgen.cpp:6364
#, c-format
msgid "Row %i"
msgstr "第 %i 行"

#: ../src/richtext/richtextbulletspage.cpp:239
#: ../src/richtext/richtextliststylepage.cpp:299
msgid "S&tandard bullet name:"
msgstr "標準項目符號名稱(&T):"

#: ../src/common/accelcmn.cpp:285 ../src/common/accelcmn.cpp:370
msgid "SPECIAL"
msgstr "SPECIAL"

#: ../src/common/fldlgcmn.cpp:342
#, c-format
msgid "Save %s file"
msgstr "儲存 %s 檔案"

#: ../src/common/stockitem.cpp:191 ../src/generic/logg.cpp:512
msgid "Save &As..."
msgstr "另存新檔(&A)…"

#: ../src/common/docview.cpp:362
msgid "Save As"
msgstr "另存新檔"

#: ../src/common/stockitem.cpp:191
#| msgid "Save &As..."
msgid "Save As..."
msgstr "另存新檔(&A)…"

#: ../src/common/stockitem.cpp:270
msgid "Save current document"
msgstr "儲存目前文件"

#: ../src/common/stockitem.cpp:271
msgid "Save current document with a different filename"
msgstr "儲存當前文件至不同的檔名"

#: ../src/generic/logg.cpp:512
msgid "Save log contents to file"
msgstr "將日誌內容儲存到檔案"

#: ../src/common/secretstore.cpp:179
#, c-format
#| msgid "Saving password for \"%s/%s\" failed: %s."
msgid "Saving password for \"%s\" failed: %s."
msgstr "無法儲存「%s」的密碼：%s。"

#: ../src/generic/fontdlgg.cpp:325
msgid "Script"
msgstr "手寫體"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:88
msgid "Scroll Lock"
msgstr "Scroll Lock"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:88
msgid "Scroll_lock"
msgstr "Scroll_lock"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:794
msgid "Scrollbar"
msgstr "Scrollbar"

#: ../src/html/helpwnd.cpp:538
msgid ""
"Search contents of help book(s) for all occurrences of the text you typed "
"above"
msgstr "搜尋說明文件內容中，您所輸入文字的所有出現過的地方"

#: ../src/generic/fdrepdlg.cpp:160
msgid "Search direction"
msgstr "搜尋方向"

#: ../src/generic/fdrepdlg.cpp:112
msgid "Search for:"
msgstr "搜尋："

#: ../src/html/helpwnd.cpp:1053
msgid "Search in all books"
msgstr "搜尋所有的書籍"

#: ../src/html/helpwnd.cpp:858
msgid "Searching..."
msgstr "搜尋中…"

#: ../src/generic/dirctrlg.cpp:446
msgid "Sections"
msgstr "章節"

#: ../src/common/ffile.cpp:239
#, c-format
msgid "Seek error on file '%s'"
msgstr "「%s」檔案定位錯誤"

#: ../src/common/ffile.cpp:229
#, c-format
msgid "Seek error on file '%s' (large files not supported by stdio)"
msgstr "「%s」檔案定位錯誤 (stdio 不支援大檔案)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:76
msgid "Select"
msgstr "選取"

#: ../src/common/stockitem.cpp:192 ../src/msw/textctrl.cpp:2727
#: ../src/osx/textctrl_osx.cpp:589 ../src/richtext/richtextctrl.cpp:339
msgid "Select &All"
msgstr "全部選擇(&A)"

#: ../src/common/stockitem.cpp:192 ../src/stc/stc_i18n.cpp:21
msgid "Select All"
msgstr "全部選擇"

#: ../src/common/docview.cpp:1903
msgid "Select a document template"
msgstr "選擇文件範本"

#: ../src/common/docview.cpp:1977
msgid "Select a document view"
msgstr "選擇文件檢視"

#: ../src/richtext/richtextfontpage.cpp:226
#: ../src/richtext/richtextfontpage.cpp:228
msgid "Select regular or bold."
msgstr "選擇是否粗體。"

#: ../src/richtext/richtextfontpage.cpp:213
#: ../src/richtext/richtextfontpage.cpp:215
msgid "Select regular or italic style."
msgstr "選擇是否斜體。"

#: ../src/richtext/richtextfontpage.cpp:239
#: ../src/richtext/richtextfontpage.cpp:241
msgid "Select underlining or no underlining."
msgstr "選擇是否加底線。"

#: ../src/richtext/richtextliststylepage.cpp:187
#: ../src/richtext/richtextliststylepage.cpp:189
msgid "Selects the list level to edit."
msgstr "選取並編輯該清單層級。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:82
msgid "Separator"
msgstr "Separator"

#: ../src/common/cmdline.cpp:1082
#, c-format
msgid "Separator expected after the option '%s'."
msgstr "在「%s」選項之後應有分隔字元。"

#: ../src/osx/menu_osx.cpp:461
msgid "Services"
msgstr "服務"

#: ../src/richtext/richtextbuffer.cpp:11219
msgid "Set Cell Style"
msgstr "設定儲存格樣式"

#: ../include/wx/xtiprop.h:175
msgid "SetProperty called w/o valid setter"
msgstr "呼叫 SetProperty 時未帶有效的 setter"

#: ../src/generic/prntdlgg.cpp:184
msgid "Setup..."
msgstr "設定…"

#: ../src/msw/dialup.cpp:543
msgid "Several active dialup connections found, choosing one randomly."
msgstr "多個撥號連線中，隨機選擇一個。"

#: ../src/richtext/richtextbackgroundpage.cpp:271
msgid "Sh&adow spread:"
msgstr "陰影擴散(&A)："

#: ../src/richtext/richtextbackgroundpage.cpp:179
msgid "Shadow"
msgstr "陰影"

#: ../src/richtext/richtextbackgroundpage.cpp:258
msgid "Shadow c&olour:"
msgstr "陰影顏色（&O）："

#: ../src/common/accelcmn.cpp:352
msgid "Shift+"
msgstr "Shift+"

#: ../src/generic/dirdlgg.cpp:147
msgid "Show &hidden directories"
msgstr "顯示隱藏目錄(&H)"

#: ../src/generic/filectrlg.cpp:983
msgid "Show &hidden files"
msgstr "顯示隱藏檔案(&H)"

#: ../src/osx/menu_osx.cpp:469
msgid "Show All"
msgstr "全部顯示"

#: ../src/html/helpwnd.cpp:493
msgid "Show all"
msgstr "全部顯示"

#: ../src/html/helpwnd.cpp:504
msgid "Show all items in index"
msgstr "以索引的方式顯示所有項目"

#: ../src/html/helpwnd.cpp:659
msgid "Show/hide navigation panel"
msgstr "顯示/隱藏導覽面板"

#: ../src/richtext/richtextsymboldlg.cpp:421
#: ../src/richtext/richtextsymboldlg.cpp:423
msgid "Shows a Unicode subset."
msgstr "顯示 Unicode 子集。"

#: ../src/richtext/richtextbulletspage.cpp:263
#: ../src/richtext/richtextbulletspage.cpp:265
#: ../src/richtext/richtextliststylepage.cpp:472
#: ../src/richtext/richtextliststylepage.cpp:474
msgid "Shows a preview of the bullet settings."
msgstr "預覽項目符號設定。"

#: ../src/richtext/richtextfontpage.cpp:330
#: ../src/richtext/richtextfontpage.cpp:332
msgid "Shows a preview of the font settings."
msgstr "顯示字型設定預覽。"

#: ../src/osx/carbon/fontdlg.cpp:394 ../src/osx/carbon/fontdlg.cpp:396
msgid "Shows a preview of the font."
msgstr "預覽字型。"

#: ../src/richtext/richtextindentspage.cpp:303
#: ../src/richtext/richtextindentspage.cpp:305
msgid "Shows a preview of the paragraph settings."
msgstr "預覽段落設定。"

#: ../src/generic/fontdlgg.cpp:460 ../src/generic/fontdlgg.cpp:462
msgid "Shows the font preview."
msgstr "顯示字型預覽。"

#: ../src/propgrid/advprops.cpp:1516
msgid "Silver"
msgstr "銀色"

#: ../src/univ/themes/mono.cpp:516
msgid "Simple monochrome theme"
msgstr "簡單的單色佈景主題"

#: ../src/richtext/richtextindentspage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:449
msgid "Single"
msgstr "單一"

#: ../src/osx/carbon/fontdlg.cpp:339
msgid "Size:"
msgstr "大小："

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1679
msgid "Sizing"
msgstr "縮放"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1676
msgid "Sizing N-S"
msgstr "縮放(南至北)"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1675
msgid "Sizing NE-SW"
msgstr "縮放(東北至西南)"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1677
msgid "Sizing NW-SE"
msgstr "縮放(東南至西北)"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1678
msgid "Sizing W-E"
msgstr "縮放(東至西)"

#: ../src/msw/progdlg.cpp:1091
msgid "Skip"
msgstr "略過"

#: ../src/generic/fontdlgg.cpp:330
msgid "Slant"
msgstr "傾斜"

#: ../src/richtext/richtextfontpage.cpp:289
msgid "Small C&apitals"
msgstr "小型大寫字(&A)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:79
msgid "Snapshot"
msgstr "Snapshot"

#: ../src/richtext/richtextborderspage.cpp:611
msgid "Solid"
msgstr "單色"

#: ../src/common/docview.cpp:1788
msgid "Sorry, could not open this file."
msgstr "抱歉，無法開啟檔案。"

#: ../src/common/prntbase.cpp:2087 ../src/common/prntbase.cpp:2095
msgid "Sorry, not enough memory to create a preview."
msgstr "抱歉，記憶體不足，無法建立預覽。"

#: ../src/richtext/richtextstyledlg.cpp:611
#: ../src/richtext/richtextstyledlg.cpp:659
#: ../src/richtext/richtextstyledlg.cpp:825
#: ../src/richtext/richtextstyledlg.cpp:901
#: ../src/richtext/richtextstyledlg.cpp:939
msgid "Sorry, that name is taken. Please choose another."
msgstr "抱歉，名字已被使用，請選擇其他名字。"

#: ../src/common/docview.cpp:1822
msgid "Sorry, the format for this file is unknown."
msgstr "抱歉，檔案格式不明。"

#: ../src/unix/sound.cpp:484
msgid "Sound data are in unsupported format."
msgstr "聲音資料格式不支援。"

#: ../src/unix/sound.cpp:469
#, c-format
msgid "Sound file '%s' is in unsupported format."
msgstr "「%s」聲音檔案格式不支援。"

#: ../src/common/stockitem.cpp:197
msgid "Spell Check"
msgstr "拼字檢查"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1680
msgid "Spraycan"
msgstr "噴漆"

#: ../src/common/paper.cpp:104
msgid "Statement, 5 1/2 x 8 1/2 in"
msgstr "結算單, 5 1/2 x 8 1/2 英吋"

#: ../src/richtext/richtextsizepage.cpp:518
#: ../src/richtext/richtextsizepage.cpp:523
msgid "Static"
msgstr "靜態"

#: ../src/common/stockitem.cpp:198
msgid "Stop"
msgstr "停止"

#: ../src/common/stockitem.cpp:199
msgid "Strikethrough"
msgstr "刪除線"

#: ../src/common/colourcmn.cpp:45
#, c-format
msgid "String To Colour : Incorrect colour specification : %s"
msgstr "顏色名稱：不正確的顏色規格：%s"

#: ../include/wx/richtext/richtextstyledlg.h:48
msgid "Style Organiser"
msgstr "樣式組織器"

#: ../src/osx/carbon/fontdlg.cpp:348
msgid "Style:"
msgstr "樣式："

#: ../src/richtext/richtextfontpage.cpp:303
msgid "Subscrip&t"
msgstr "下標(&T)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:83
msgid "Subtract"
msgstr "減號"

#: ../src/richtext/richtextfontpage.cpp:296
msgid "Supe&rscript"
msgstr "下標(&R)"

#: ../src/common/paper.cpp:150
msgid "SuperA/SuperA/A4 227 x 356 mm"
msgstr "SuperA/SuperA/A4 227 x 356 公釐"

#: ../src/common/paper.cpp:151
msgid "SuperB/SuperB/A3 305 x 487 mm"
msgstr "SuperB/SuperB/A3 305 x 487 公釐"

#: ../src/richtext/richtextfontpage.cpp:320
msgid "Suppress hyphe&nation"
msgstr "抑制將同一英文字分行顯示(&N)"

#: ../src/generic/fontdlgg.cpp:326
msgid "Swiss"
msgstr "瑞士"

#: ../src/richtext/richtextbulletspage.cpp:280
#: ../src/richtext/richtextliststylepage.cpp:488
msgid "Symbol"
msgstr "符號"

#: ../src/richtext/richtextbulletspage.cpp:227
#: ../src/richtext/richtextliststylepage.cpp:288
msgid "Symbol &font:"
msgstr "符號字型(&F)："

#: ../include/wx/richtext/richtextsymboldlg.h:47
msgid "Symbols"
msgstr "符號"

#: ../src/common/imagtiff.cpp:369 ../src/common/imagtiff.cpp:382
#: ../src/common/imagtiff.cpp:741
msgid "TIFF: Couldn't allocate memory."
msgstr "TIFF：無法配置記憶體。"

#: ../src/common/imagtiff.cpp:301
msgid "TIFF: Error loading image."
msgstr "TIFF：載入圖像錯誤。"

#: ../src/common/imagtiff.cpp:468
msgid "TIFF: Error reading image."
msgstr "TIFF：讀取圖像錯誤。"

#: ../src/common/imagtiff.cpp:608
msgid "TIFF: Error saving image."
msgstr "TIFF：儲存圖像錯誤。"

#: ../src/common/imagtiff.cpp:846
msgid "TIFF: Error writing image."
msgstr "TIFF：寫入圖像錯誤。"

#: ../src/common/imagtiff.cpp:355
msgid "TIFF: Image size is abnormally big."
msgstr "TIFF：影像太大。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:68
msgid "Tab"
msgstr "Tab"

#: ../src/richtext/richtextbuffer.cpp:11500
msgid "Table Properties"
msgstr "表格性質"

#: ../src/common/paper.cpp:145
msgid "Tabloid Extra 11.69 x 18 in"
msgstr "小報加長 11.69 x 18 英吋"

#: ../src/common/paper.cpp:102
msgid "Tabloid, 11 x 17 in"
msgstr "小報, 11 x 17 英吋"

#: ../src/richtext/richtextformatdlg.cpp:350
msgid "Tabs"
msgstr "定位點"

#: ../src/propgrid/advprops.cpp:1507
msgid "Teal"
msgstr "鴨綠色"

#: ../src/generic/fontdlgg.cpp:327
msgid "Teletype"
msgstr "電傳打字機"

#: ../src/common/docview.cpp:1904
msgid "Templates"
msgstr "範本"

#: ../src/common/fmapbase.cpp:158
msgid "Thai (ISO-8859-11)"
msgstr "泰文 (ISO-8859-11)"

#: ../src/common/ftp.cpp:625
msgid "The FTP server doesn't support passive mode."
msgstr "檔案傳輸(FTP)伺服器不支援被動模式。"

#: ../src/common/ftp.cpp:611
msgid "The FTP server doesn't support the PORT command."
msgstr "FTP伺服器不支援PORT指令。"

#: ../src/richtext/richtextbulletspage.cpp:151
#: ../src/richtext/richtextbulletspage.cpp:153
#: ../src/richtext/richtextliststylepage.cpp:215
#: ../src/richtext/richtextliststylepage.cpp:217
msgid "The available bullet styles."
msgstr "可用的項目符號樣式。"

#: ../src/richtext/richtextstyledlg.cpp:202
#: ../src/richtext/richtextstyledlg.cpp:204
msgid "The available styles."
msgstr "可用的樣式。"

#: ../src/richtext/richtextbackgroundpage.cpp:168
#: ../src/richtext/richtextbackgroundpage.cpp:170
msgid "The background colour."
msgstr "背景顏色。"

#: ../src/richtext/richtextborderspage.cpp:267
#: ../src/richtext/richtextborderspage.cpp:269
#: ../src/richtext/richtextborderspage.cpp:301
#: ../src/richtext/richtextborderspage.cpp:303
#: ../src/richtext/richtextborderspage.cpp:335
#: ../src/richtext/richtextborderspage.cpp:337
#: ../src/richtext/richtextborderspage.cpp:369
#: ../src/richtext/richtextborderspage.cpp:371
#: ../src/richtext/richtextborderspage.cpp:435
#: ../src/richtext/richtextborderspage.cpp:437
#: ../src/richtext/richtextborderspage.cpp:469
#: ../src/richtext/richtextborderspage.cpp:471
#: ../src/richtext/richtextborderspage.cpp:503
#: ../src/richtext/richtextborderspage.cpp:505
#: ../src/richtext/richtextborderspage.cpp:537
#: ../src/richtext/richtextborderspage.cpp:539
msgid "The border line style."
msgstr "邊框線條樣式。"

#: ../src/richtext/richtextmarginspage.cpp:267
#: ../src/richtext/richtextmarginspage.cpp:269
msgid "The bottom margin size."
msgstr "下外邊距大小。"

#: ../src/richtext/richtextmarginspage.cpp:381
#: ../src/richtext/richtextmarginspage.cpp:383
msgid "The bottom padding size."
msgstr "下內邊距。"

#: ../src/richtext/richtextsizepage.cpp:639
#: ../src/richtext/richtextsizepage.cpp:641
#: ../src/richtext/richtextsizepage.cpp:653
#: ../src/richtext/richtextsizepage.cpp:655
msgid "The bottom position."
msgstr "頁尾位置。"

#: ../src/richtext/richtextbulletspage.cpp:191
#: ../src/richtext/richtextbulletspage.cpp:193
#: ../src/richtext/richtextbulletspage.cpp:214
#: ../src/richtext/richtextbulletspage.cpp:216
#: ../src/richtext/richtextliststylepage.cpp:254
#: ../src/richtext/richtextliststylepage.cpp:256
#: ../src/richtext/richtextliststylepage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:277
msgid "The bullet character."
msgstr "項目符號字元。"

#: ../src/richtext/richtextsymboldlg.cpp:443
#: ../src/richtext/richtextsymboldlg.cpp:445
msgid "The character code."
msgstr "字元碼。"

#: ../src/common/fontmap.cpp:203
#, c-format
msgid ""
"The charset '%s' is unknown. You may select\n"
"another charset to replace it with or choose\n"
"[Cancel] if it cannot be replaced"
msgstr ""
"不明的字集「%s」。請選擇其他字集取代，\n"
"如果無法取代，則選擇「取消」"

#: ../src/msw/ole/dataobj.cpp:394
#, c-format
msgid "The clipboard format '%d' doesn't exist."
msgstr "剪貼簿格式「%d」不存在。"

#: ../src/richtext/richtextstylepage.cpp:130
#: ../src/richtext/richtextstylepage.cpp:132
msgid "The default style for the next paragraph."
msgstr "下一個段落的預設樣式。"

#: ../src/generic/dirdlgg.cpp:202
#, c-format
msgid ""
"The directory '%s' does not exist\n"
"Create it now?"
msgstr ""
"目錄「%s」不存在\n"
"是否馬上建立？"

#: ../src/html/htmprint.cpp:286
#, c-format
msgid ""
"The document \"%s\" doesn't fit on the page horizontally and will be "
"truncated if printed.\n"
"\n"
"Would you like to proceed with printing it nevertheless?"
msgstr ""
"文件「%s」的水平尺寸不符合頁面，若要列印的話，將會被截斷。\n"
"\n"
"無論如何都要列印此份文件？"

#: ../src/common/docview.cpp:1199
#, c-format
msgid ""
"The file '%s' doesn't exist and couldn't be opened.\n"
"It has been removed from the most recently used files list."
msgstr ""
"「%s」檔案不存在，無法開啟。\n"
"已從最近使用的檔案紀錄清單中除名。"

#: ../src/richtext/richtextindentspage.cpp:208
#: ../src/richtext/richtextindentspage.cpp:210
#: ../src/richtext/richtextliststylepage.cpp:394
#: ../src/richtext/richtextliststylepage.cpp:396
msgid "The first line indent."
msgstr "首列縮排。"

#: ../src/generic/dbgrptg.cpp:321
msgid "The following debug report will be generated\n"
msgstr "下述除錯報告將會產生\n"

#: ../src/generic/fontdlgg.cpp:415 ../src/generic/fontdlgg.cpp:417
msgid "The font colour."
msgstr "字型顏色。"

#: ../src/generic/fontdlgg.cpp:375 ../src/generic/fontdlgg.cpp:377
msgid "The font family."
msgstr "字族。"

#: ../src/richtext/richtextsymboldlg.cpp:405
#: ../src/richtext/richtextsymboldlg.cpp:407
msgid "The font from which to take the symbol."
msgstr "符號使用該字型。"

#: ../src/generic/fontdlgg.cpp:428 ../src/generic/fontdlgg.cpp:430
#: ../src/generic/fontdlgg.cpp:434 ../src/generic/fontdlgg.cpp:436
msgid "The font point size."
msgstr "字點大小。"

#: ../src/osx/carbon/fontdlg.cpp:343 ../src/osx/carbon/fontdlg.cpp:345
msgid "The font size in points."
msgstr "字型大小以點計。"

#: ../src/richtext/richtextfontpage.cpp:181
#: ../src/richtext/richtextfontpage.cpp:183
msgid "The font size units, points or pixels."
msgstr "字型大小單位，以點或像素計。"

#: ../src/generic/fontdlgg.cpp:386 ../src/generic/fontdlgg.cpp:388
msgid "The font style."
msgstr "字型樣式。"

#: ../src/generic/fontdlgg.cpp:397 ../src/generic/fontdlgg.cpp:399
msgid "The font weight."
msgstr "字型粗細。"

#: ../src/common/docview.cpp:1480
#, c-format
msgid "The format of file '%s' couldn't be determined."
msgstr "無法確定「%s」檔案的格式。"

#: ../src/richtext/richtextbackgroundpage.cpp:219
#: ../src/richtext/richtextbackgroundpage.cpp:221
msgid "The horizontal offset."
msgstr "水平偏移值。"

#: ../src/richtext/richtextindentspage.cpp:199
#: ../src/richtext/richtextindentspage.cpp:201
#: ../src/richtext/richtextliststylepage.cpp:385
#: ../src/richtext/richtextliststylepage.cpp:387
msgid "The left indent."
msgstr "左側縮排。"

#: ../src/richtext/richtextmarginspage.cpp:194
#: ../src/richtext/richtextmarginspage.cpp:196
msgid "The left margin size."
msgstr "左外邊距。"

#: ../src/richtext/richtextmarginspage.cpp:308
#: ../src/richtext/richtextmarginspage.cpp:310
msgid "The left padding size."
msgstr "左內邊距。"

#: ../src/richtext/richtextsizepage.cpp:534
#: ../src/richtext/richtextsizepage.cpp:536
#: ../src/richtext/richtextsizepage.cpp:548
#: ../src/richtext/richtextsizepage.cpp:550
msgid "The left position."
msgstr "左邊位置。"

#: ../src/richtext/richtextindentspage.cpp:288
#: ../src/richtext/richtextindentspage.cpp:290
#: ../src/richtext/richtextliststylepage.cpp:462
#: ../src/richtext/richtextliststylepage.cpp:464
msgid "The line spacing."
msgstr "列距。"

#: ../src/richtext/richtextbulletspage.cpp:255
#: ../src/richtext/richtextbulletspage.cpp:257
msgid "The list item number."
msgstr "清單項目編號。"

#: ../src/msw/ole/automtn.cpp:664
msgid "The locale ID is unknown."
msgstr "區域 ID 未知。"

#: ../src/richtext/richtextsizepage.cpp:366
#: ../src/richtext/richtextsizepage.cpp:368
msgid "The object height."
msgstr "物件高度。"

#: ../src/richtext/richtextsizepage.cpp:474
#: ../src/richtext/richtextsizepage.cpp:476
msgid "The object maximum height."
msgstr "物件最大高度。"

#: ../src/richtext/richtextsizepage.cpp:447
#: ../src/richtext/richtextsizepage.cpp:449
msgid "The object maximum width."
msgstr "物件最大寬度。"

#: ../src/richtext/richtextsizepage.cpp:420
#: ../src/richtext/richtextsizepage.cpp:422
msgid "The object minimum height."
msgstr "物件最小高度。"

#: ../src/richtext/richtextsizepage.cpp:393
#: ../src/richtext/richtextsizepage.cpp:395
msgid "The object minimum width."
msgstr "物件最小寬度。"

#: ../src/richtext/richtextsizepage.cpp:332
#: ../src/richtext/richtextsizepage.cpp:334
msgid "The object width."
msgstr "物件寬度。"

#: ../src/richtext/richtextindentspage.cpp:227
#: ../src/richtext/richtextindentspage.cpp:229
msgid "The outline level."
msgstr "大綱層級。"

#: ../src/common/log.cpp:277
#, c-format
msgid "The previous message repeated %u time."
msgid_plural "The previous message repeated %u times."
msgstr[0] "上一個訊息重複了 %u 次。"

#: ../src/common/log.cpp:270
msgid "The previous message repeated once."
msgstr "上一個訊息重複了一次。"

#: ../src/richtext/richtextsymboldlg.cpp:462
#: ../src/richtext/richtextsymboldlg.cpp:464
msgid "The range to show."
msgstr "顯示範圍。"

#: ../src/generic/dbgrptg.cpp:325
msgid ""
"The report contains the files listed below. If any of these files contain "
"private information,\n"
"please uncheck them and they will be removed from the report.\n"
msgstr ""
"報告包含了以下檔案。如果這些檔案含有私人資訊，\n"
"請去掉其勾選，那些檔案就會從報告移除。\n"

#: ../src/common/cmdline.cpp:1253
#, c-format
msgid "The required parameter '%s' was not specified."
msgstr "沒有指定必要的參數「%s」。"

#: ../src/richtext/richtextindentspage.cpp:217
#: ../src/richtext/richtextindentspage.cpp:219
#: ../src/richtext/richtextliststylepage.cpp:403
#: ../src/richtext/richtextliststylepage.cpp:405
msgid "The right indent."
msgstr "右側縮排。"

#: ../src/richtext/richtextmarginspage.cpp:219
#: ../src/richtext/richtextmarginspage.cpp:221
msgid "The right margin size."
msgstr "右外邊距。"

#: ../src/richtext/richtextmarginspage.cpp:333
#: ../src/richtext/richtextmarginspage.cpp:335
msgid "The right padding size."
msgstr "右內邊距。"

#: ../src/richtext/richtextsizepage.cpp:604
#: ../src/richtext/richtextsizepage.cpp:606
#: ../src/richtext/richtextsizepage.cpp:618
#: ../src/richtext/richtextsizepage.cpp:620
msgid "The right position."
msgstr "右方位置。"

#: ../src/richtext/richtextbackgroundpage.cpp:309
#: ../src/richtext/richtextbackgroundpage.cpp:311
msgid "The shadow blur distance."
msgstr "陰影模糊距離。"

#: ../src/richtext/richtextbackgroundpage.cpp:266
#: ../src/richtext/richtextbackgroundpage.cpp:268
msgid "The shadow colour."
msgstr "陰影顏色。"

#: ../src/richtext/richtextbackgroundpage.cpp:336
#: ../src/richtext/richtextbackgroundpage.cpp:338
msgid "The shadow opacity."
msgstr "陰影混濁度。"

#: ../src/richtext/richtextbackgroundpage.cpp:282
#: ../src/richtext/richtextbackgroundpage.cpp:284
msgid "The shadow spread."
msgstr "陰影擴散。"

#: ../src/richtext/richtextindentspage.cpp:267
#: ../src/richtext/richtextliststylepage.cpp:439
#: ../src/richtext/richtextliststylepage.cpp:441
msgid "The spacing after the paragraph."
msgstr "段落之後的間距。"

#: ../src/richtext/richtextindentspage.cpp:257
#: ../src/richtext/richtextindentspage.cpp:259
#: ../src/richtext/richtextliststylepage.cpp:430
#: ../src/richtext/richtextliststylepage.cpp:432
msgid "The spacing before the paragraph."
msgstr "段落之前的間距。"

#: ../src/richtext/richtextstylepage.cpp:110
#: ../src/richtext/richtextstylepage.cpp:112
msgid "The style name."
msgstr "樣式名稱。"

#: ../src/richtext/richtextstylepage.cpp:120
#: ../src/richtext/richtextstylepage.cpp:122
msgid "The style on which this style is based."
msgstr "此樣式的基底樣式。"

#: ../src/richtext/richtextstyledlg.cpp:214
#: ../src/richtext/richtextstyledlg.cpp:216
msgid "The style preview."
msgstr "樣式預覽。"

#: ../src/msw/ole/automtn.cpp:680
msgid "The system cannot find the file specified."
msgstr "系統無法找到指定的檔案。"

#: ../src/richtext/richtexttabspage.cpp:114
#: ../src/richtext/richtexttabspage.cpp:116
msgid "The tab position."
msgstr "定位點位置。"

#: ../src/richtext/richtexttabspage.cpp:120
msgid "The tab positions."
msgstr "定位點位置。"

#: ../src/richtext/richtextctrl.cpp:3102
msgid "The text couldn't be saved."
msgstr "文字無法儲存。"

#: ../src/richtext/richtextmarginspage.cpp:242
#: ../src/richtext/richtextmarginspage.cpp:244
msgid "The top margin size."
msgstr "上外邊距。"

#: ../src/richtext/richtextmarginspage.cpp:356
#: ../src/richtext/richtextmarginspage.cpp:358
msgid "The top padding size."
msgstr "上內邊距。"

#: ../src/richtext/richtextsizepage.cpp:569
#: ../src/richtext/richtextsizepage.cpp:571
#: ../src/richtext/richtextsizepage.cpp:583
#: ../src/richtext/richtextsizepage.cpp:585
msgid "The top position."
msgstr "上方位置。"

#: ../src/common/cmdline.cpp:1231
#, c-format
msgid "The value for the option '%s' must be specified."
msgstr "必須指定「%s」選項的值。"

#: ../src/richtext/richtextborderspage.cpp:585
#: ../src/richtext/richtextborderspage.cpp:587
msgid "The value of the corner radius."
msgstr "角位半徑值。"

#: ../src/msw/dialup.cpp:432
#, c-format
msgid ""
"The version of remote access service (RAS) installed on this machine is too "
"old, please upgrade (the following required function is missing: %s)."
msgstr ""
"於此電腦安裝的遠端存取服務(RAS)版本太舊，請更新 (缺少以下必要的功能：%s)。"

#: ../src/richtext/richtextbackgroundpage.cpp:242
#: ../src/richtext/richtextbackgroundpage.cpp:244
msgid "The vertical offset."
msgstr "垂直偏移值。"

#: ../src/html/htmprint.cpp:752 ../src/richtext/richtextprint.cpp:618
msgid ""
"There was a problem during page setup: you may need to set a default printer."
msgstr "頁面設定時有問題：必須設定預設印表機。"

#: ../src/html/htmprint.cpp:270
msgid ""
"This document doesn't fit on the page horizontally and will be truncated "
"when it is printed."
msgstr "此文件的水平尺寸不符合頁面，若要列印的話，將會被截斷。"

#: ../src/common/image.cpp:2878
#, c-format
msgid "This is not a %s."
msgstr "這不是 %s。"

#: ../src/common/wincmn.cpp:1673
msgid "This platform does not support background transparency."
msgstr "這個平臺不支援透明背景。"

#: ../src/gtk/window.cpp:5632
msgid ""
"This program was compiled with a too old version of GTK+, please rebuild "
"with GTK+ 2.12 or newer."
msgstr "這個程式是以很舊版本的 GTK+ 所編譯，請以 GTK+2.12 或更新版本重新組建。"

#: ../src/msw/thread.cpp:1262
msgid ""
"Thread module initialization failed: cannot store value in thread local "
"storage"
msgstr "執行緒模組初始化失敗：無法將值儲存到執行緒內部儲存區"

#: ../src/unix/threadpsx.cpp:1819
msgid "Thread module initialization failed: failed to create thread key"
msgstr "執行緒模組初始化失敗：無法建立執行緒機碼"

#: ../src/msw/thread.cpp:1250
msgid ""
"Thread module initialization failed: impossible to allocate index in thread "
"local storage"
msgstr "執行緒模組初始化失敗：無法在「執行緒內部儲存區」配置索引"

#: ../src/unix/threadpsx.cpp:1037
msgid "Thread priority setting is ignored."
msgstr "忽略執行緒的優先等級設定。"

#: ../src/msw/mdi.cpp:174
msgid "Tile &Horizontally"
msgstr "水平排列(&H)"

#: ../src/msw/mdi.cpp:175
msgid "Tile &Vertically"
msgstr "垂直排列(&V)"

#: ../src/common/ftp.cpp:200
msgid "Timeout while waiting for FTP server to connect, try passive mode."
msgstr "等待 FTP 伺服器連線時逾時，請嘗試用被動(passive)模式。"

#: ../src/generic/tipdlg.cpp:201
msgid "Tip of the Day"
msgstr "每日小祕訣"

#: ../src/generic/tipdlg.cpp:140
msgid "Tips not available, sorry!"
msgstr "抱歉，無法提供小祕訣！"

#: ../src/generic/prntdlgg.cpp:238
msgid "To:"
msgstr "到："

#: ../src/richtext/richtextbuffer.cpp:8364
msgid "Too many EndStyle calls!"
msgstr "呼叫 EndStyle 太多次！"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:795
msgid "Tooltip"
msgstr "Tooltip"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:796
msgid "TooltipText"
msgstr "TooltipText"

#: ../src/generic/prntdlgg.cpp:877
msgid "Top margin (mm):"
msgstr "頂邊距(公釐)："

#: ../src/generic/aboutdlgg.cpp:79
msgid "Translations by "
msgstr "翻譯者："

#: ../src/generic/aboutdlgg.cpp:188
msgid "Translators"
msgstr "翻譯者"

#. TRANSLATORS: Name of Boolean true value
#: ../src/propgrid/propgrid.cpp:195
msgid "True"
msgstr "真"

#: ../src/common/fs_mem.cpp:221
#, c-format
msgid "Trying to remove file '%s' from memory VFS, but it is not loaded!"
msgstr "嘗試從「記憶體虛擬檔案系統」移除「%s」檔案，但它並未被載入！"

#: ../src/common/fmapbase.cpp:156
msgid "Turkish (ISO-8859-9)"
msgstr "土耳其文 (ISO-8859-9)"

#: ../src/richtext/richtextfontpage.cpp:151
#: ../src/richtext/richtextfontpage.cpp:153
msgid "Type a font name."
msgstr "輸入字型名稱。"

#: ../src/richtext/richtextfontpage.cpp:166
#: ../src/richtext/richtextfontpage.cpp:168
msgid "Type a size in points."
msgstr "輸入大小，單位為點數。"

#: ../src/msw/ole/automtn.cpp:676
#, c-format
msgid "Type mismatch in argument %u."
msgstr "引數 %u 的類別不吻合。"

#: ../src/common/xtistrm.cpp:318 ../src/common/xtixml.cpp:356
#: ../src/common/xtixml.cpp:509
msgid "Type must have enum - long conversion"
msgstr "必須進行 enum - long 的類型轉換"

#: ../src/propgrid/propgridiface.cpp:388
#, c-format
msgid ""
"Type operation \"%s\" failed: Property labeled \"%s\" is of type \"%s\", NOT "
"\"%s\"."
msgstr "類型操作「%s」失敗：標示為「%s」的性質是「%s」類型，而非「%s」。"

#: ../src/common/paper.cpp:133
msgid "US Std Fanfold, 14 7/8 x 11 in"
msgstr "美國標準複寫簿, 14 7/8 x 11 英吋"

#: ../src/common/fmapbase.cpp:196
msgid "US-ASCII"
msgstr "US-ASCII"

#: ../src/unix/fswatcher_inotify.cpp:109
msgid "Unable to add inotify watch"
msgstr "無法加入 inotify 監看"

#: ../src/unix/fswatcher_kqueue.cpp:156
msgid "Unable to add kqueue watch"
msgstr "無法加入 kqueue 監看"

#: ../include/wx/msw/private/fswatcher.h:142
msgid "Unable to associate handle with I/O completion port"
msgstr "無法將控柄與 I/O 完成的通訊埠關聯"

#: ../include/wx/msw/private/fswatcher.h:125
msgid "Unable to close I/O completion port handle"
msgstr "無法關閉 I/O 完成通訊埠的控柄"

#: ../src/unix/fswatcher_inotify.cpp:97
msgid "Unable to close inotify instance"
msgstr "無法關閉 inotify 實體"

#: ../include/wx/unix/private/fswatcher_kqueue.h:74
#, c-format
msgid "Unable to close path '%s'"
msgstr "無法關閉「%s」路徑"

#: ../include/wx/msw/private/fswatcher.h:48
#, c-format
msgid "Unable to close the handle for '%s'"
msgstr "無法關閉「%s」的控柄"

#: ../include/wx/msw/private/fswatcher.h:273
msgid "Unable to create I/O completion port"
msgstr "無法建立 I/O 完成的通訊埠"

#: ../src/msw/fswatcher.cpp:84
msgid "Unable to create IOCP worker thread"
msgstr "無法建立 IOCP 背景工作執行緒"

#: ../src/unix/fswatcher_inotify.cpp:74
msgid "Unable to create inotify instance"
msgstr "無法建立 inotify 執行實體"

#: ../src/unix/fswatcher_kqueue.cpp:117
msgid "Unable to create kqueue instance"
msgstr "無法建立 kqueue 執行實體"

#: ../include/wx/msw/private/fswatcher.h:262
msgid "Unable to dequeue completion packet"
msgstr "無法移出佇列完成封包"

#: ../src/unix/fswatcher_kqueue.cpp:205
msgid "Unable to get events from kqueue"
msgstr "無法從 kqueue 取得事件"

#: ../src/gtk/app.cpp:409
msgid "Unable to initialize GTK+, is DISPLAY set properly?"
msgstr "無法初始化 gtk+，DISPLAY 是否已經正確設定？"

#: ../include/wx/unix/private/fswatcher_kqueue.h:57
#, c-format
msgid "Unable to open path '%s'"
msgstr "無法開啟「%s」路徑"

#: ../src/html/htmlwin.cpp:589
#, c-format
msgid "Unable to open requested HTML document: %s"
msgstr "無法開啟 HTML 文件：%s"

#: ../src/unix/sound.cpp:368
msgid "Unable to play sound asynchronously."
msgstr "無法非同步播放聲音。"

#: ../include/wx/msw/private/fswatcher.h:213
msgid "Unable to post completion status"
msgstr "無法公佈完成狀態"

#: ../src/unix/fswatcher_inotify.cpp:556
msgid "Unable to read from inotify descriptor"
msgstr "無法讀取 inotify 描述子"

#: ../src/unix/fswatcher_inotify.cpp:141
#, c-format
msgid "Unable to remove inotify watch %i"
msgstr "無法移除 inotify 監看 %i"

#: ../src/unix/fswatcher_kqueue.cpp:173
msgid "Unable to remove kqueue watch"
msgstr "無法移除 kqueue 監看"

#: ../src/msw/fswatcher.cpp:168
#, c-format
msgid "Unable to set up watch for '%s'"
msgstr "無法為「%s」設定監看"

#: ../src/msw/fswatcher.cpp:91
msgid "Unable to start IOCP worker thread"
msgstr "無法開始 IOCP worker 執行緒"

#: ../src/common/stockitem.cpp:201
msgid "Undelete"
msgstr "取消刪除"

#: ../src/common/stockitem.cpp:202
msgid "Underline"
msgstr "底線"

#. TRANSLATORS: Label of underlined font
#: ../src/osx/carbon/fontdlg.cpp:370 ../src/propgrid/advprops.cpp:603
#: ../src/richtext/richtextfontpage.cpp:359
msgid "Underlined"
msgstr "加底線"

#: ../src/common/stockitem.cpp:266
msgid "Undo last action"
msgstr "回復最後一個動作"

#: ../src/common/cmdline.cpp:1028
#, c-format
msgid "Unexpected characters following option '%s'."
msgstr "「%s」選項之後有未能預期的字元。"

#: ../src/unix/fswatcher_inotify.cpp:274
#, c-format
msgid "Unexpected event for \"%s\": no matching watch descriptor."
msgstr "「%s」有未能預期的事件：沒有相符的監看描述子。"

#: ../src/common/cmdline.cpp:1194
#, c-format
msgid "Unexpected parameter '%s'"
msgstr "意外參數 '%s'"

#: ../include/wx/msw/private/fswatcher.h:148
msgid "Unexpectedly new I/O completion port was created"
msgstr "新的 I/O 完成通訊埠被未預期地建立"

#: ../src/msw/fswatcher.cpp:70
msgid "Ungraceful worker thread termination"
msgstr "背景工作執行緒無預期地終止了"

#: ../src/richtext/richtextsymboldlg.cpp:459
#: ../src/richtext/richtextsymboldlg.cpp:460
#: ../src/richtext/richtextsymboldlg.cpp:461
msgid "Unicode"
msgstr "萬國碼(Unicode)"

#: ../src/common/fmapbase.cpp:185 ../src/common/fmapbase.cpp:191
msgid "Unicode 16 bit (UTF-16)"
msgstr "十六位元萬國碼 (UTF-16)"

#: ../src/common/fmapbase.cpp:190
msgid "Unicode 16 bit Big Endian (UTF-16BE)"
msgstr "十六位元萬國碼大尾序 (UTF-16BE)"

#: ../src/common/fmapbase.cpp:186
msgid "Unicode 16 bit Little Endian (UTF-16LE)"
msgstr "十六位元萬國碼小尾序 (UTF-16LE)"

#: ../src/common/fmapbase.cpp:187 ../src/common/fmapbase.cpp:193
msgid "Unicode 32 bit (UTF-32)"
msgstr "三十二位元萬國碼 (UTF-32)"

#: ../src/common/fmapbase.cpp:192
msgid "Unicode 32 bit Big Endian (UTF-32BE)"
msgstr "三十二位元萬國碼大尾序 (UTF-32BE)"

#: ../src/common/fmapbase.cpp:188
msgid "Unicode 32 bit Little Endian (UTF-32LE)"
msgstr "三十二位元萬國碼小尾序 (UTF-32LE)"

#: ../src/common/fmapbase.cpp:182
msgid "Unicode 7 bit (UTF-7)"
msgstr "七位元萬國碼 (UTF-7)"

#: ../src/common/fmapbase.cpp:183
msgid "Unicode 8 bit (UTF-8)"
msgstr "八位元萬國碼 (UTF-8)"

#: ../src/common/stockitem.cpp:204
msgid "Unindent"
msgstr "取消縮排"

#: ../src/richtext/richtextborderspage.cpp:360
#: ../src/richtext/richtextborderspage.cpp:362
msgid "Units for the bottom border width."
msgstr "下邊框單位。"

#: ../src/richtext/richtextmarginspage.cpp:277
#: ../src/richtext/richtextmarginspage.cpp:279
msgid "Units for the bottom margin."
msgstr "下外邊距單位。"

#: ../src/richtext/richtextborderspage.cpp:528
#: ../src/richtext/richtextborderspage.cpp:530
msgid "Units for the bottom outline width."
msgstr "下輪廓單位。"

#: ../src/richtext/richtextmarginspage.cpp:391
#: ../src/richtext/richtextmarginspage.cpp:393
msgid "Units for the bottom padding."
msgstr "下內邊距單位。"

#: ../src/richtext/richtextsizepage.cpp:664
#: ../src/richtext/richtextsizepage.cpp:666
msgid "Units for the bottom position."
msgstr "下方位置單位。"

#: ../src/richtext/richtextborderspage.cpp:596
#: ../src/richtext/richtextborderspage.cpp:598
msgid "Units for the corner radius."
msgstr "角位半徑單位。"

#: ../src/richtext/richtextborderspage.cpp:258
#: ../src/richtext/richtextborderspage.cpp:260
msgid "Units for the left border width."
msgstr "左邊框單位。"

#: ../src/richtext/richtextmarginspage.cpp:204
#: ../src/richtext/richtextmarginspage.cpp:206
msgid "Units for the left margin."
msgstr "左外邊距單位。"

#: ../src/richtext/richtextborderspage.cpp:426
#: ../src/richtext/richtextborderspage.cpp:428
msgid "Units for the left outline width."
msgstr "左輪廓單位。"

#: ../src/richtext/richtextmarginspage.cpp:318
#: ../src/richtext/richtextmarginspage.cpp:320
msgid "Units for the left padding."
msgstr "左內邊距單位。"

#: ../src/richtext/richtextsizepage.cpp:559
#: ../src/richtext/richtextsizepage.cpp:561
msgid "Units for the left position."
msgstr "左方位置單位。"

#: ../src/richtext/richtextsizepage.cpp:485
#: ../src/richtext/richtextsizepage.cpp:487
msgid "Units for the maximum object height."
msgstr "最大物件高度的單位。"

#: ../src/richtext/richtextsizepage.cpp:458
#: ../src/richtext/richtextsizepage.cpp:460
msgid "Units for the maximum object width."
msgstr "最大物件寬度的單位。"

#: ../src/richtext/richtextsizepage.cpp:431
#: ../src/richtext/richtextsizepage.cpp:433
msgid "Units for the minimum object height."
msgstr "最小物件高度的單位。"

#: ../src/richtext/richtextsizepage.cpp:404
#: ../src/richtext/richtextsizepage.cpp:406
msgid "Units for the minimum object width."
msgstr "最小物件寬度的單位。"

#: ../src/richtext/richtextsizepage.cpp:377
#: ../src/richtext/richtextsizepage.cpp:379
msgid "Units for the object height."
msgstr "物件高度單位。"

#: ../src/richtext/richtextsizepage.cpp:343
#: ../src/richtext/richtextsizepage.cpp:345
msgid "Units for the object width."
msgstr "物件寬度單位。"

#: ../src/richtext/richtextborderspage.cpp:292
#: ../src/richtext/richtextborderspage.cpp:294
msgid "Units for the right border width."
msgstr "右邊框單位。"

#: ../src/richtext/richtextmarginspage.cpp:229
#: ../src/richtext/richtextmarginspage.cpp:231
msgid "Units for the right margin."
msgstr "右外邊距單位。"

#: ../src/richtext/richtextborderspage.cpp:460
#: ../src/richtext/richtextborderspage.cpp:462
msgid "Units for the right outline width."
msgstr "右輪廓單位。"

#: ../src/richtext/richtextmarginspage.cpp:343
#: ../src/richtext/richtextmarginspage.cpp:345
msgid "Units for the right padding."
msgstr "右內邊距單位。"

#: ../src/richtext/richtextsizepage.cpp:629
#: ../src/richtext/richtextsizepage.cpp:631
msgid "Units for the right position."
msgstr "右方位置單位。"

#: ../src/richtext/richtextborderspage.cpp:326
#: ../src/richtext/richtextborderspage.cpp:328
msgid "Units for the top border width."
msgstr "上邊框單位。"

#: ../src/richtext/richtextmarginspage.cpp:252
#: ../src/richtext/richtextmarginspage.cpp:254
msgid "Units for the top margin."
msgstr "上外邊距單位。"

#: ../src/richtext/richtextborderspage.cpp:494
#: ../src/richtext/richtextborderspage.cpp:496
msgid "Units for the top outline width."
msgstr "上輪廓單位。"

#: ../src/richtext/richtextmarginspage.cpp:366
#: ../src/richtext/richtextmarginspage.cpp:368
msgid "Units for the top padding."
msgstr "上內邊距單位。"

#: ../src/richtext/richtextsizepage.cpp:594
#: ../src/richtext/richtextsizepage.cpp:596
msgid "Units for the top position."
msgstr "上方位置單位。"

#: ../src/richtext/richtextbackgroundpage.cpp:230
#: ../src/richtext/richtextbackgroundpage.cpp:232
#: ../src/richtext/richtextbackgroundpage.cpp:253
#: ../src/richtext/richtextbackgroundpage.cpp:255
#: ../src/richtext/richtextbackgroundpage.cpp:293
#: ../src/richtext/richtextbackgroundpage.cpp:295
#: ../src/richtext/richtextbackgroundpage.cpp:320
#: ../src/richtext/richtextbackgroundpage.cpp:322
msgid "Units for this value."
msgstr "本值的單位。"

#: ../src/msw/dde.cpp:1241
#, c-format
msgid "Unknown DDE error %08x"
msgstr "不明的「動態資料交換」錯誤 %08x"

#: ../src/common/xtistrm.cpp:410
msgid "Unknown Object passed to GetObjectClassInfo"
msgstr "傳給 GetObjectClassInfo 不明的物件"

#: ../src/common/imagpng.cpp:386
#, c-format
msgid "Unknown PNG resolution unit %d"
msgstr "未知的 PNG 解析度單位 %d"

#: ../src/common/xtixml.cpp:327
#, c-format
msgid "Unknown Property %s"
msgstr "不明的性質 %s"

#: ../src/common/imagtiff.cpp:529
#, c-format
msgid "Unknown TIFF resolution unit %d ignored"
msgstr "不明的 TIFF 解析度單位 %d，已忽略"

#: ../src/propgrid/props.cpp:158
#, c-format
msgid "Unknown base %d. Base 10 will be used."
msgstr "未知 Base %d。將使用 Base 10。"

#: ../src/unix/dlunix.cpp:160
msgid "Unknown dynamic library error"
msgstr "不明的動態函式庫錯誤"

#: ../src/common/fmapbase.cpp:810
#, c-format
msgid "Unknown encoding (%d)"
msgstr "不明編碼 (%d)"

#: ../src/msw/ole/automtn.cpp:688
#, c-format
msgid "Unknown error %08x"
msgstr "不明錯誤，錯誤碼 %08x"

#: ../src/msw/ole/automtn.cpp:647
msgid "Unknown exception"
msgstr "不明例外情況"

#: ../src/common/image.cpp:2857
msgid "Unknown image data format."
msgstr "不明影像資料格式。"

#: ../src/common/cmdline.cpp:913
#, c-format
msgid "Unknown long option '%s'"
msgstr "不明長選項 '%s'"

#: ../src/msw/ole/automtn.cpp:631
msgid "Unknown name or named argument."
msgstr "不明名稱或具名引數。"

#: ../src/common/cmdline.cpp:928 ../src/common/cmdline.cpp:950
#, c-format
msgid "Unknown option '%s'"
msgstr "不明選項 '%s'"

#: ../src/common/mimecmn.cpp:224
#, c-format
msgid "Unmatched '{' in an entry for mime type %s."
msgstr "mime 類型 %s 有不成對的 {"

#: ../src/common/cmdproc.cpp:258 ../src/common/cmdproc.cpp:284
#: ../src/common/cmdproc.cpp:304
msgid "Unnamed command"
msgstr "未命名指令"

#. TRANSLATORS: Text  displayed for unspecified value
#: ../src/propgrid/propgrid.cpp:396
msgid "Unspecified"
msgstr "未指定"

#: ../src/msw/clipbrd.cpp:311
msgid "Unsupported clipboard format."
msgstr "不支援的剪貼簿格式。"

#: ../src/common/appcmn.cpp:280
#, c-format
msgid "Unsupported theme '%s'."
msgstr "不支援的佈景主題「%s」。"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:63 ../src/common/stockitem.cpp:205
#: ../src/generic/fdrepdlg.cpp:152
msgid "Up"
msgstr "上"

#: ../src/richtext/richtextbulletspage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:483
msgid "Upper case letters"
msgstr "大寫字母"

#: ../src/richtext/richtextbulletspage.cpp:277
#: ../src/richtext/richtextliststylepage.cpp:485
msgid "Upper case roman numerals"
msgstr "大寫羅馬數字"

#: ../src/common/cmdline.cpp:1325
#, c-format
msgid "Usage: %s"
msgstr "使用方式：%s"

#: ../src/richtext/richtextbackgroundpage.cpp:194
msgid "Use &shadow"
msgstr "使用陰影(&S)"

#: ../src/richtext/richtextindentspage.cpp:169
#: ../src/richtext/richtextindentspage.cpp:171
#: ../src/richtext/richtextliststylepage.cpp:358
#: ../src/richtext/richtextliststylepage.cpp:360
msgid "Use the current alignment setting."
msgstr "使用當前的對齊設定。"

#: ../src/gtk/font.cpp:552
msgid ""
"Using private fonts is not supported on this system: Pango library is too "
"old, 1.38 or later required."
msgstr "不支援在此系統使用私人字型：Pango 函式庫過舊，需要 1.38 或更新版。"

#: ../src/common/valtext.cpp:145
msgid "Validation conflict"
msgstr "驗證衝突"

#: ../src/propgrid/props.cpp:312
#, c-format
msgid "Value must be %s or higher."
msgstr "值必須大於或等於 %s。"

#: ../src/propgrid/props.cpp:339
#, c-format
msgid "Value must be %s or less."
msgstr "值必須小於或等於 %s。"

#: ../src/propgrid/props.cpp:317 ../src/propgrid/props.cpp:344
#, c-format
msgid "Value must be between %s and %s."
msgstr "值必須介於 %s 和 %s 之間。"

#: ../src/generic/aboutdlgg.cpp:128
msgid "Version "
msgstr "版本："

#: ../src/richtext/richtextsizepage.cpp:291
#: ../src/richtext/richtextsizepage.cpp:293
msgid "Vertical alignment."
msgstr "垂直對齊。"

#: ../src/generic/filedlgg.cpp:202
msgid "View files as a detailed view"
msgstr "按詳細資料檢視檔案"

#: ../src/generic/filedlgg.cpp:200
msgid "View files as a list view"
msgstr "按清單檢視檔案"

#: ../src/common/docview.cpp:1978
msgid "Views"
msgstr "檢視"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1681
msgid "Wait"
msgstr "等待"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1683
msgid "Wait Arrow"
msgstr "等待箭頭"

#: ../src/unix/epolldispatcher.cpp:213
#, c-format
msgid "Waiting for IO on epoll descriptor %d failed"
msgstr "等候 epoll 描述子 %d 的輸出入失敗"

#: ../src/common/log.cpp:223
msgid "Warning: "
msgstr "警告："

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1682
msgid "Watch"
msgstr "時計"

#: ../src/gtk/webview_webkit2.cpp:436
#, c-format
msgid ""
"Web extension not found in \"%s\", some wxWebView functionality will be not "
"available"
msgstr "在「%s」找不到網頁擴充套件，部份 wxWebView 功能會無法使用。"

#. TRANSLATORS: Label of font weight
#: ../src/propgrid/advprops.cpp:598
msgid "Weight"
msgstr "粗細"

#: ../src/common/fmapbase.cpp:148
msgid "Western European (ISO-8859-1)"
msgstr "西歐語系 (ISO-8859-1)"

#: ../src/common/fmapbase.cpp:162
msgid "Western European with Euro (ISO-8859-15)"
msgstr "西歐語系 (附歐元) (ISO-8859-15)"

#: ../src/generic/fontdlgg.cpp:447 ../src/generic/fontdlgg.cpp:449
msgid "Whether the font is underlined."
msgstr "字型是否加底線。"

#: ../src/propgrid/advprops.cpp:1520
msgid "White"
msgstr "白色"

#: ../src/html/helpwnd.cpp:535
msgid "Whole words only"
msgstr "只限整個字"

#: ../src/univ/themes/win32.cpp:1102
msgid "Win32 theme"
msgstr "Win32 佈景主題"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:797
msgid "Window"
msgstr "Window"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:798
msgid "WindowFrame"
msgstr "WindowFrame"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:799
msgid "WindowText"
msgstr "WindowText"

#: ../src/common/fmapbase.cpp:177
msgid "Windows Arabic (CP 1256)"
msgstr "Windows 阿拉伯文 (CP 1256)"

#: ../src/common/fmapbase.cpp:178
msgid "Windows Baltic (CP 1257)"
msgstr "Windows 波羅的海語系 (CP 1257)"

#: ../src/common/fmapbase.cpp:171
msgid "Windows Central European (CP 1250)"
msgstr "Windows 中歐語系 (CP 1250)"

#: ../src/common/fmapbase.cpp:168
msgid "Windows Chinese Simplified (CP 936) or GB-2312"
msgstr "Windows 簡體中文 (CP 936) 或 GB2312"

#: ../src/common/fmapbase.cpp:170
msgid "Windows Chinese Traditional (CP 950) or Big-5"
msgstr "Windows 正體中文 (CP 950) 或 Big5"

#: ../src/common/fmapbase.cpp:172
msgid "Windows Cyrillic (CP 1251)"
msgstr "Windows 斯拉夫語系 (CP 1251)"

#: ../src/common/fmapbase.cpp:174
msgid "Windows Greek (CP 1253)"
msgstr "Windows 希臘文 (CP 1253)"

#: ../src/common/fmapbase.cpp:176
msgid "Windows Hebrew (CP 1255)"
msgstr "Windows 希伯來文 (CP 1255)"

#: ../src/common/fmapbase.cpp:167
msgid "Windows Japanese (CP 932) or Shift-JIS"
msgstr "Windows 日文 (CP 932) 或 Shift-JIS"

#: ../src/common/fmapbase.cpp:180
msgid "Windows Johab (CP 1361)"
msgstr "Windows 韓文雙位元組合型符號 (Johab) (CP 1256)"

#: ../src/common/fmapbase.cpp:169
msgid "Windows Korean (CP 949)"
msgstr "Windows 韓文 (CP 949)"

#: ../src/common/fmapbase.cpp:166
msgid "Windows Thai (CP 874)"
msgstr "Windows 泰文 (CP 874)"

#: ../src/common/fmapbase.cpp:175
msgid "Windows Turkish (CP 1254)"
msgstr "Windows 土耳其文 (CP 1254)"

#: ../src/common/fmapbase.cpp:179
msgid "Windows Vietnamese (CP 1258)"
msgstr "Windows 越南文 (CP 1258)"

#: ../src/common/fmapbase.cpp:173
msgid "Windows Western European (CP 1252)"
msgstr "Windows 西歐語系 (CP 1252)"

#: ../src/common/fmapbase.cpp:181
msgid "Windows/DOS OEM (CP 437)"
msgstr "Windows/DOS 委製 (CP 437)"

#: ../src/common/fmapbase.cpp:165
msgid "Windows/DOS OEM Cyrillic (CP 866)"
msgstr "Windows/DOS OEM 斯拉夫語系 (CP 1251)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:112
msgid "Windows_Left"
msgstr "Windows_Left"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:114
msgid "Windows_Menu"
msgstr "Windows_Menu"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:113
msgid "Windows_Right"
msgstr "Windows_Right"

#: ../src/common/ffile.cpp:151
#, c-format
msgid "Write error on file '%s'"
msgstr "寫入「%s」檔案時發生錯誤"

#: ../src/xml/xml.cpp:928
#, c-format
msgid "XML parsing error: '%s' at line %d"
msgstr "XML 解析錯誤：「%s」在第 %d 列"

#: ../src/common/xpmdecod.cpp:797
msgid "XPM: Malformed pixel data!"
msgstr "XPM：圖素資料格式不對！"

#: ../src/common/xpmdecod.cpp:705
#, c-format
msgid "XPM: incorrect colour description in line %d"
msgstr "XPM：於第「%d」列的顏色描述不正確！"

#: ../src/common/xpmdecod.cpp:680
#| msgid "XPM：incorrect header format!"
msgid "XPM: incorrect header format!"
msgstr "XPM：標頭格式不正確！"

#: ../src/common/xpmdecod.cpp:717 ../src/common/xpmdecod.cpp:726
#, c-format
msgid "XPM: malformed colour definition '%s' at line %d!"
msgstr "XPM：顏色定義「%s」於第「%d」列不正確！"

#: ../src/common/xpmdecod.cpp:756
msgid "XPM: no colors left to use for mask!"
msgstr "XPM：沒有剩下供作為遮罩的顏色！"

#: ../src/common/xpmdecod.cpp:783
#, c-format
msgid "XPM: truncated image data at line %d!"
msgstr "XPM：影像資料於第 %d 列被截斷！"

#: ../src/propgrid/advprops.cpp:1519
msgid "Yellow"
msgstr "黃色"

#: ../src/osx/carbon/overlay.cpp:155
msgid "You cannot Clear an overlay that is not inited"
msgstr "不能清除未初始化的覆蓋"

#: ../src/dfb/overlay.cpp:61 ../src/osx/carbon/overlay.cpp:107
msgid "You cannot Init an overlay twice"
msgstr "不能初始化覆蓋兩次"

#: ../src/generic/dirdlgg.cpp:287
msgid "You cannot add a new directory to this section."
msgstr "不能在這區段加入新的目錄。"

#: ../src/propgrid/propgrid.cpp:3250
msgid "You have entered invalid value. Press ESC to cancel editing."
msgstr "輸入了無效的值，按 ESC 以取消編輯。"

#: ../src/common/stockitem.cpp:209
msgid "Zoom &In"
msgstr "放大(&I)"

#: ../src/common/stockitem.cpp:210
msgid "Zoom &Out"
msgstr "縮小(&O)"

#: ../src/common/prntbase.cpp:1624 ../src/common/stockitem.cpp:209
msgid "Zoom In"
msgstr "放大"

#: ../src/common/prntbase.cpp:1610 ../src/common/stockitem.cpp:210
msgid "Zoom Out"
msgstr "縮小"

#: ../src/common/stockitem.cpp:208
msgid "Zoom to &Fit"
msgstr "縮放以適應視窗(&F)"

#: ../src/common/stockitem.cpp:208
msgid "Zoom to Fit"
msgstr "縮放以適應視窗"

#: ../src/msw/dde.cpp:1208
msgid "a DDEML application has created a prolonged race condition."
msgstr "DDEML 應用程式已建立延長的競賽環境(race condition)。"

#: ../src/msw/dde.cpp:1196
msgid ""
"a DDEML function was called without first calling the DdeInitialize "
"function,\n"
"or an invalid instance identifier\n"
"was passed to a DDEML function."
msgstr ""
"在呼叫 DDEML 其它函式之前，未事先呼叫 DdeInitialize 函式，\n"
"或傳給 DDEML 函式的是\n"
"無效的實體物件識別。"

#: ../src/msw/dde.cpp:1214
msgid "a client's attempt to establish a conversation has failed."
msgstr "用戶端嘗試建立對話失敗。"

#: ../src/msw/dde.cpp:1211
msgid "a memory allocation failed."
msgstr "記憶體配置失敗。"

#: ../src/msw/dde.cpp:1205
msgid "a parameter failed to be validated by the DDEML."
msgstr "DDEML 參數驗證失敗。"

#: ../src/msw/dde.cpp:1187
msgid "a request for a synchronous advise transaction has timed out."
msgstr "同步「連結交涉」請求已逾時。"

#: ../src/msw/dde.cpp:1193
msgid "a request for a synchronous data transaction has timed out."
msgstr "同步「資料交涉」請求已逾時。"

#: ../src/msw/dde.cpp:1202
msgid "a request for a synchronous execute transaction has timed out."
msgstr "同步「執行交涉」請求已逾時。"

#: ../src/msw/dde.cpp:1220
msgid "a request for a synchronous poke transaction has timed out."
msgstr "同步「資料傳送交涉」請求已逾時。"

#: ../src/msw/dde.cpp:1235
msgid "a request to end an advise transaction has timed out."
msgstr "終止「連結交涉」的請求已逾時。"

#: ../src/msw/dde.cpp:1229
msgid ""
"a server-side transaction was attempted on a conversation\n"
"that was terminated by the client, or the server\n"
"terminated before completing a transaction."
msgstr ""
"啟動伺服器端交涉的對話\n"
"被用戶端終止，或伺服器\n"
"在完成交涉前終止。"

#: ../src/msw/dde.cpp:1217
msgid "a transaction failed."
msgstr "交涉失敗。"

#: ../src/common/accelcmn.cpp:191
msgid "alt"
msgstr "alt"

#: ../src/msw/dde.cpp:1199
msgid ""
"an application initialized as APPCLASS_MONITOR has\n"
"attempted to perform a DDE transaction,\n"
"or an application initialized as APPCMD_CLIENTONLY has \n"
"attempted to perform server transactions."
msgstr ""
"初始化為 APPCLASS_MONITOR 的應用程式\n"
"試圖執行「動態資料交換」交涉，\n"
"或初始化為 APPCMD_CLIENTONLY 的應用程式\n"
"試圖執行伺服器的交涉。"

#: ../src/msw/dde.cpp:1223
msgid "an internal call to the PostMessage function has failed. "
msgstr "內部呼叫 PostMessage 函式失敗。"

#: ../src/msw/dde.cpp:1232
msgid "an internal error has occurred in the DDEML."
msgstr "DDEML 發生內部錯誤。"

#: ../src/msw/dde.cpp:1238
msgid ""
"an invalid transaction identifier was passed to a DDEML function.\n"
"Once the application has returned from an XTYP_XACT_COMPLETE callback,\n"
"the transaction identifier for that callback is no longer valid."
msgstr ""
"傳給 DDEML 函式的是無效的交涉識別。\n"
"一旦應用程式從 XTYP_XACT_COMPLETE 回調函式返回，\n"
"該回調函式的交涉識別就不再有效。"

#: ../src/common/zipstrm.cpp:1525
msgid "assuming this is a multi-part zip concatenated"
msgstr "假設這是一個多重部分 zip 的結合"

#: ../src/common/fileconf.cpp:1854
#, c-format
msgid "attempt to change immutable key '%s' ignored."
msgstr "忽略對不可變更機碼 '%s' 的修改。"

#: ../src/html/chm.cpp:329
msgid "bad arguments to library function"
msgstr "函式傳入錯誤的引數"

#: ../src/html/chm.cpp:341
msgid "bad signature"
msgstr "錯誤的簽名"

#: ../src/common/zipstrm.cpp:1979
msgid "bad zipfile offset to entry"
msgstr "zip 檔案中輸入的偏移值錯誤"

#: ../src/common/ftp.cpp:403
msgid "binary"
msgstr "二進位"

#: ../src/common/fontcmn.cpp:1200
msgid "bold"
msgstr "粗體"

#: ../src/msw/utils.cpp:1145
#, c-format
msgid "build %lu"
msgstr "組建 %lu"

#: ../src/common/ffile.cpp:75
#, c-format
msgid "can't close file '%s'"
msgstr "無法關閉檔案 '%s'"

#: ../src/common/file.cpp:245
#, c-format
msgid "can't close file descriptor %d"
msgstr "無法關閉檔案描述子 %d"

#: ../src/common/file.cpp:615
#, c-format
msgid "can't commit changes to file '%s'"
msgstr "無法將修改反映到檔案 '%s'"

#: ../src/common/file.cpp:178
#, c-format
msgid "can't create file '%s'"
msgstr "無法建立檔案 '%s'"

#: ../src/common/fileconf.cpp:1146
#, c-format
msgid "can't delete user configuration file '%s'"
msgstr "無法刪除使用者組態檔案 '%s'"

#: ../src/common/file.cpp:524
#, c-format
msgid "can't determine if the end of file is reached on descriptor %d"
msgstr "無法確定是否已達檔案 %d 的尾部"

#: ../src/common/zipstrm.cpp:1750
msgid "can't find central directory in zip"
msgstr "無法在 zip 檔中找到中心目錄"

#: ../src/common/file.cpp:494
#, c-format
msgid "can't find length of file on file descriptor %d"
msgstr "無法獲得檔案描述子 %d 的檔案的長度"

#: ../src/msw/utils.cpp:341
msgid "can't find user's HOME, using current directory."
msgstr "找不到使用者目錄，使用目前目錄。"

#: ../src/common/file.cpp:410
#, c-format
msgid "can't flush file descriptor %d"
msgstr "無法重新整理檔案描述子 %d"

#: ../src/common/file.cpp:466
#, c-format
msgid "can't get seek position on file descriptor %d"
msgstr "無法獲得檔案描述子 %d 的指標位置"

#: ../src/common/fontmap.cpp:325
msgid "can't load any font, aborting"
msgstr "無法載入任何字型，活動中止"

#: ../src/common/ffile.cpp:59 ../src/common/file.cpp:231
#, c-format
msgid "can't open file '%s'"
msgstr "無法開啟檔案 '%s'"

#: ../src/common/fileconf.cpp:320
#, c-format
msgid "can't open global configuration file '%s'."
msgstr "無法開啟全局組態檔案 '%s'。"

#: ../src/common/fileconf.cpp:336
#, c-format
msgid "can't open user configuration file '%s'."
msgstr "無法開啟使用者組態檔案 '%s'。"

#: ../src/common/fileconf.cpp:991
msgid "can't open user configuration file."
msgstr "無法開啟使用者組態檔案。"

#: ../src/common/zipstrm.cpp:575
msgid "can't re-initialize zlib deflate stream"
msgstr "無法重新初始化 zlib 壓縮串流"

#: ../src/common/zipstrm.cpp:600
msgid "can't re-initialize zlib inflate stream"
msgstr "無法重新初始化 zlib 解壓串流"

#: ../src/common/file.cpp:348
#, c-format
msgid "can't read from file descriptor %d"
msgstr "無法讀取檔案描述子 %d"

#: ../src/common/file.cpp:610
#, c-format
msgid "can't remove file '%s'"
msgstr "無法移除檔案 '%s'"

#: ../src/common/file.cpp:627
#, c-format
msgid "can't remove temporary file '%s'"
msgstr "無法刪除暫時檔案 '%s'"

#: ../src/common/file.cpp:452
#, c-format
msgid "can't seek on file descriptor %d"
msgstr "無法定位檔案描述子 %d"

#: ../src/common/textfile.cpp:164
#, c-format
msgid "can't write buffer '%s' to disk."
msgstr "無法將暫存區 '%s' 寫到磁碟。"

#: ../src/common/file.cpp:367
#, c-format
msgid "can't write to file descriptor %d"
msgstr "無法寫到檔案描述子 %d"

#: ../src/common/fileconf.cpp:1005
msgid "can't write user configuration file."
msgstr "無法寫入使用者組態檔案。"

#. TRANSLATORS: Checkbox state name
#: ../src/common/datavcmn.cpp:2055 ../src/generic/datavgen.cpp:1300
msgid "checked"
msgstr "已勾選"

#: ../src/html/chm.cpp:345
msgid "checksum error"
msgstr "總和檢查碼錯誤"

#: ../src/common/tarstrm.cpp:817
msgid "checksum failure reading tar header block"
msgstr "讀取 tar 標頭區塊時發生檢查碼錯誤"

#: ../src/richtext/richtextbackgroundpage.cpp:226
#: ../src/richtext/richtextbackgroundpage.cpp:249
#: ../src/richtext/richtextbackgroundpage.cpp:289
#: ../src/richtext/richtextbackgroundpage.cpp:316
#: ../src/richtext/richtextborderspage.cpp:254
#: ../src/richtext/richtextborderspage.cpp:288
#: ../src/richtext/richtextborderspage.cpp:322
#: ../src/richtext/richtextborderspage.cpp:356
#: ../src/richtext/richtextborderspage.cpp:422
#: ../src/richtext/richtextborderspage.cpp:456
#: ../src/richtext/richtextborderspage.cpp:490
#: ../src/richtext/richtextborderspage.cpp:524
#: ../src/richtext/richtextborderspage.cpp:592
#: ../src/richtext/richtextmarginspage.cpp:201
#: ../src/richtext/richtextmarginspage.cpp:226
#: ../src/richtext/richtextmarginspage.cpp:249
#: ../src/richtext/richtextmarginspage.cpp:274
#: ../src/richtext/richtextmarginspage.cpp:315
#: ../src/richtext/richtextmarginspage.cpp:340
#: ../src/richtext/richtextmarginspage.cpp:363
#: ../src/richtext/richtextmarginspage.cpp:388
#: ../src/richtext/richtextsizepage.cpp:339
#: ../src/richtext/richtextsizepage.cpp:373
#: ../src/richtext/richtextsizepage.cpp:400
#: ../src/richtext/richtextsizepage.cpp:427
#: ../src/richtext/richtextsizepage.cpp:454
#: ../src/richtext/richtextsizepage.cpp:481
#: ../src/richtext/richtextsizepage.cpp:555
#: ../src/richtext/richtextsizepage.cpp:590
#: ../src/richtext/richtextsizepage.cpp:625
#: ../src/richtext/richtextsizepage.cpp:660
msgid "cm"
msgstr "公分(cm)"

#: ../src/html/chm.cpp:347
msgid "compression error"
msgstr "壓縮失敗"

#: ../src/common/regex.cpp:236
msgid "conversion to 8-bit encoding failed"
msgstr "無法轉換成八位元編碼"

#: ../src/common/accelcmn.cpp:189
msgid "ctrl"
msgstr "ctrl"

#: ../src/common/cmdline.cpp:1499
msgid "date"
msgstr "日期"

#: ../src/html/chm.cpp:349
msgid "decompression error"
msgstr "解壓失敗"

#: ../src/common/cmdline.cpp:1495
msgid "double"
msgstr "雙倍"

#: ../src/common/debugrpt.cpp:542
msgid "dump of the process state (binary)"
msgstr "傾印程序狀態（二進位碼）"

#: ../src/common/datetimefmt.cpp:1995
msgid "eighteenth"
msgstr "第十八"

#: ../src/common/datetimefmt.cpp:1985
msgid "eighth"
msgstr "第八"

#: ../src/common/datetimefmt.cpp:1988
msgid "eleventh"
msgstr "第十一"

#: ../src/common/fileconf.cpp:1840
#, c-format
msgid "entry '%s' appears more than once in group '%s'"
msgstr "項目 '%s' 在 '%s' 群中已出現一次以上"

#: ../src/html/chm.cpp:343
msgid "error in data format"
msgstr "資料格式錯誤"

#: ../src/html/chm.cpp:331
msgid "error opening file"
msgstr "檔案開啟失敗"

#: ../src/common/zipstrm.cpp:1839
msgid "error reading zip central directory"
msgstr "讀取 zip 中心目錄發生錯誤"

#: ../src/common/zipstrm.cpp:1931
msgid "error reading zip local header"
msgstr "讀取 zip 本地表頭時發生錯誤"

#: ../src/common/zipstrm.cpp:2606
#, c-format
msgid "error writing zip entry '%s': bad crc or length"
msgstr "寫入 zip 條目 '%s' 時發生錯誤：不當的 crc 或長度"

#: ../src/common/zipstrm.cpp:2599
#, c-format
#| msgid "error writing zip entry '%s': bad crc or length"
msgid "error writing zip entry '%s': file too large without ZIP64"
msgstr "寫入 zip 條目 '%s' 時發生錯誤：檔案過大，且沒有 ZIP64"

#: ../src/common/fontcmn.cpp:1210
#| msgid "bold"
msgid "extrabold"
msgstr "特粗"

#: ../src/common/fontcmn.cpp:1228
msgid "extraheavy"
msgstr "特濃"

#: ../src/common/fontcmn.cpp:1172
#| msgid "light"
msgid "extralight"
msgstr "特細"

#: ../src/msw/webview_ie.cpp:951
#| msgid "Failed to execute '%s'\n"
msgid "failed to evaluate"
msgstr "無法計算"

#: ../src/common/ffile.cpp:189
#, c-format
msgid "failed to flush the file '%s'"
msgstr "重新整理檔案 '%s' 失敗"

#: ../src/msw/webview_ie.cpp:960
#| msgid "Failed to retrieve text of RAS error message"
msgid "failed to retrieve execution result"
msgstr "無法取得執行結果"

#. TRANSLATORS: Name of Boolean false value
#: ../src/generic/datavgen.cpp:1066
msgid "false"
msgstr "假"

#: ../src/common/datetimefmt.cpp:1992
msgid "fifteenth"
msgstr "第十五"

#: ../src/common/datetimefmt.cpp:1982
msgid "fifth"
msgstr "第五"

#: ../src/common/fileconf.cpp:584
#, c-format
msgid "file '%s', line %zu: '%s' ignored after group header."
msgstr "檔案 '%s' 第 %zu 列：忽略位於群組標頭之後的 '%s' 。"

#: ../src/common/fileconf.cpp:613
#, c-format
msgid "file '%s', line %zu: '=' expected."
msgstr "檔案 '%s' 第 %zu 列：應有 '='。"

#: ../src/common/fileconf.cpp:636
#, c-format
msgid "file '%s', line %zu: key '%s' was first found at line %d."
msgstr "檔案 '%s', 第 %zu 列：機碼 '%s' 第一次出現在第 %d 列。"

#: ../src/common/fileconf.cpp:626
#, c-format
msgid "file '%s', line %zu: value for immutable key '%s' ignored."
msgstr "檔案 '%s' 第 %zu 列：忽略對不可變更機碼 '%s' 的值。"

#: ../src/common/fileconf.cpp:548
#, c-format
msgid "file '%s': unexpected character %c at line %zu."
msgstr "檔案 '%s'： 不應有字元 %c 存在於第 %zu 列。"

#: ../src/richtext/richtextbuffer.cpp:8739
msgid "files"
msgstr "檔案"

#: ../src/common/datetimefmt.cpp:1978
msgid "first"
msgstr "第一"

#: ../src/html/helpwnd.cpp:1253
msgid "font size"
msgstr "字型大小"

#: ../src/common/datetimefmt.cpp:1991
msgid "fourteenth"
msgstr "第十四"

#: ../src/common/datetimefmt.cpp:1981
msgid "fourth"
msgstr "第四"

#: ../src/common/appbase.cpp:787
msgid "generate verbose log messages"
msgstr "產生冗長的記錄訊息"

#: ../src/common/fontcmn.cpp:1220
msgid "heavy"
msgstr "濃體"

#: ../src/richtext/richtextbuffer.cpp:13139
#: ../src/richtext/richtextbuffer.cpp:13249
msgid "image"
msgstr "圖像"

#: ../src/common/tarstrm.cpp:793
msgid "incomplete header block in tar"
msgstr "tar 的標頭區塊不完整"

#: ../src/common/xtixml.cpp:489
msgid "incorrect event handler string, missing dot"
msgstr "不正確的事件處理常式字串，缺少小點"

#: ../src/common/tarstrm.cpp:1378
msgid "incorrect size given for tar entry"
msgstr "給了 tar 項目不正確的大小"

#: ../src/common/lzmastream.cpp:186
msgid "input compressed using unknown XZ option"
msgstr "輸入用了未知的 XZ 選項壓縮"

#: ../src/common/lzmastream.cpp:191
msgid "input is corrupted"
msgstr "輸入損壞"

#: ../src/common/lzmastream.cpp:182
msgid "input is not in XZ format"
msgstr "輸入不是 XZ 格式"

#: ../src/common/tarstrm.cpp:990
msgid "invalid data in extended tar header"
msgstr "tar 擴充標頭中有無效的資料"

#: ../src/generic/logg.cpp:1030
msgid "invalid message box return value"
msgstr "訊息框傳回無效的值"

#: ../src/common/zipstrm.cpp:1691
msgid "invalid zip file"
msgstr "zip 檔案無效"

#: ../src/common/fontcmn.cpp:1233
msgid "italic"
msgstr "斜體"

#: ../src/common/fontcmn.cpp:1177
msgid "light"
msgstr "細體"

#: ../src/common/fontcmn.cpp:1190
msgid "medium"
msgstr "適中"

#: ../src/common/datetimefmt.cpp:2151
msgid "midnight"
msgstr "午夜"

#: ../src/common/datetimefmt.cpp:1996
msgid "nineteenth"
msgstr "第十九"

#: ../src/common/datetimefmt.cpp:1986
msgid "ninth"
msgstr "第九"

#: ../src/msw/dde.cpp:1183
msgid "no DDE error."
msgstr "沒有「動態資料交換」錯誤。"

#: ../src/html/chm.cpp:327
msgid "no error"
msgstr "沒有任何錯誤"

#: ../src/dfb/fontmgr.cpp:174
#, c-format
msgid "no fonts found in %s, using builtin font"
msgstr "於 %s 找不到字型，將使用內建字型"

#: ../src/html/helpdata.cpp:653
msgid "noname"
msgstr "未命名"

#: ../src/common/datetimefmt.cpp:2150
msgid "noon"
msgstr "中午"

#: ../src/common/fontcmn.cpp:1185 ../src/richtext/richtextstyles.cpp:779
msgid "normal"
msgstr "正常"

#: ../src/common/cmdline.cpp:1491
msgid "num"
msgstr "數字"

#: ../src/common/accelcmn.cpp:197
msgid "num "
msgstr "num "

#: ../src/common/xtixml.cpp:259
msgid "objects cannot have XML Text Nodes"
msgstr "物件不能有 XML 文字子節點"

#: ../src/common/lzmastream.cpp:270 ../src/common/lzmastream.cpp:345
#: ../src/html/chm.cpp:339
msgid "out of memory"
msgstr "記憶體不足"

#: ../src/common/debugrpt.cpp:518
msgid "process context description"
msgstr "程序上下文描述"

#: ../src/richtext/richtextbackgroundpage.cpp:227
#: ../src/richtext/richtextbackgroundpage.cpp:250
#: ../src/richtext/richtextbackgroundpage.cpp:290
#: ../src/richtext/richtextbackgroundpage.cpp:317
#: ../src/richtext/richtextborderspage.cpp:255
#: ../src/richtext/richtextborderspage.cpp:289
#: ../src/richtext/richtextborderspage.cpp:323
#: ../src/richtext/richtextborderspage.cpp:357
#: ../src/richtext/richtextborderspage.cpp:423
#: ../src/richtext/richtextborderspage.cpp:457
#: ../src/richtext/richtextborderspage.cpp:491
#: ../src/richtext/richtextborderspage.cpp:525
#: ../src/richtext/richtextborderspage.cpp:593
#: ../src/richtext/richtextfontpage.cpp:177
#: ../src/richtext/richtextfontpage.cpp:180
msgid "pt"
msgstr "pt"

#: ../src/richtext/richtextbackgroundpage.cpp:225
#: ../src/richtext/richtextbackgroundpage.cpp:228
#: ../src/richtext/richtextbackgroundpage.cpp:229
#: ../src/richtext/richtextbackgroundpage.cpp:248
#: ../src/richtext/richtextbackgroundpage.cpp:251
#: ../src/richtext/richtextbackgroundpage.cpp:252
#: ../src/richtext/richtextbackgroundpage.cpp:288
#: ../src/richtext/richtextbackgroundpage.cpp:291
#: ../src/richtext/richtextbackgroundpage.cpp:292
#: ../src/richtext/richtextbackgroundpage.cpp:315
#: ../src/richtext/richtextbackgroundpage.cpp:318
#: ../src/richtext/richtextbackgroundpage.cpp:319
#: ../src/richtext/richtextborderspage.cpp:253
#: ../src/richtext/richtextborderspage.cpp:256
#: ../src/richtext/richtextborderspage.cpp:257
#: ../src/richtext/richtextborderspage.cpp:287
#: ../src/richtext/richtextborderspage.cpp:290
#: ../src/richtext/richtextborderspage.cpp:291
#: ../src/richtext/richtextborderspage.cpp:321
#: ../src/richtext/richtextborderspage.cpp:324
#: ../src/richtext/richtextborderspage.cpp:325
#: ../src/richtext/richtextborderspage.cpp:355
#: ../src/richtext/richtextborderspage.cpp:358
#: ../src/richtext/richtextborderspage.cpp:359
#: ../src/richtext/richtextborderspage.cpp:421
#: ../src/richtext/richtextborderspage.cpp:424
#: ../src/richtext/richtextborderspage.cpp:425
#: ../src/richtext/richtextborderspage.cpp:455
#: ../src/richtext/richtextborderspage.cpp:458
#: ../src/richtext/richtextborderspage.cpp:459
#: ../src/richtext/richtextborderspage.cpp:489
#: ../src/richtext/richtextborderspage.cpp:492
#: ../src/richtext/richtextborderspage.cpp:493
#: ../src/richtext/richtextborderspage.cpp:523
#: ../src/richtext/richtextborderspage.cpp:526
#: ../src/richtext/richtextborderspage.cpp:527
#: ../src/richtext/richtextborderspage.cpp:591
#: ../src/richtext/richtextborderspage.cpp:594
#: ../src/richtext/richtextborderspage.cpp:595
#: ../src/richtext/richtextfontpage.cpp:178
#: ../src/richtext/richtextmarginspage.cpp:200
#: ../src/richtext/richtextmarginspage.cpp:202
#: ../src/richtext/richtextmarginspage.cpp:203
#: ../src/richtext/richtextmarginspage.cpp:225
#: ../src/richtext/richtextmarginspage.cpp:227
#: ../src/richtext/richtextmarginspage.cpp:228
#: ../src/richtext/richtextmarginspage.cpp:248
#: ../src/richtext/richtextmarginspage.cpp:250
#: ../src/richtext/richtextmarginspage.cpp:251
#: ../src/richtext/richtextmarginspage.cpp:273
#: ../src/richtext/richtextmarginspage.cpp:275
#: ../src/richtext/richtextmarginspage.cpp:276
#: ../src/richtext/richtextmarginspage.cpp:314
#: ../src/richtext/richtextmarginspage.cpp:316
#: ../src/richtext/richtextmarginspage.cpp:317
#: ../src/richtext/richtextmarginspage.cpp:339
#: ../src/richtext/richtextmarginspage.cpp:341
#: ../src/richtext/richtextmarginspage.cpp:342
#: ../src/richtext/richtextmarginspage.cpp:362
#: ../src/richtext/richtextmarginspage.cpp:364
#: ../src/richtext/richtextmarginspage.cpp:365
#: ../src/richtext/richtextmarginspage.cpp:387
#: ../src/richtext/richtextmarginspage.cpp:389
#: ../src/richtext/richtextmarginspage.cpp:390
#: ../src/richtext/richtextsizepage.cpp:338
#: ../src/richtext/richtextsizepage.cpp:341
#: ../src/richtext/richtextsizepage.cpp:342
#: ../src/richtext/richtextsizepage.cpp:372
#: ../src/richtext/richtextsizepage.cpp:375
#: ../src/richtext/richtextsizepage.cpp:376
#: ../src/richtext/richtextsizepage.cpp:399
#: ../src/richtext/richtextsizepage.cpp:402
#: ../src/richtext/richtextsizepage.cpp:403
#: ../src/richtext/richtextsizepage.cpp:426
#: ../src/richtext/richtextsizepage.cpp:429
#: ../src/richtext/richtextsizepage.cpp:430
#: ../src/richtext/richtextsizepage.cpp:453
#: ../src/richtext/richtextsizepage.cpp:456
#: ../src/richtext/richtextsizepage.cpp:457
#: ../src/richtext/richtextsizepage.cpp:480
#: ../src/richtext/richtextsizepage.cpp:483
#: ../src/richtext/richtextsizepage.cpp:484
#: ../src/richtext/richtextsizepage.cpp:554
#: ../src/richtext/richtextsizepage.cpp:557
#: ../src/richtext/richtextsizepage.cpp:558
#: ../src/richtext/richtextsizepage.cpp:589
#: ../src/richtext/richtextsizepage.cpp:592
#: ../src/richtext/richtextsizepage.cpp:593
#: ../src/richtext/richtextsizepage.cpp:624
#: ../src/richtext/richtextsizepage.cpp:627
#: ../src/richtext/richtextsizepage.cpp:628
#: ../src/richtext/richtextsizepage.cpp:659
#: ../src/richtext/richtextsizepage.cpp:662
#: ../src/richtext/richtextsizepage.cpp:663
msgid "px"
msgstr "像素"

#: ../src/common/accelcmn.cpp:195
msgid "rawctrl"
msgstr "rawctrl"

#: ../src/html/chm.cpp:333
msgid "read error"
msgstr "讀取出錯"

#: ../src/common/zipstrm.cpp:2146
#, c-format
msgid "reading zip stream (entry %s): bad crc"
msgstr "讀取 zip 串流 (條目 %s): 不良的 crc"

#: ../src/common/zipstrm.cpp:2141
#, c-format
msgid "reading zip stream (entry %s): bad length"
msgstr "讀取 zip 串流 (條目 %s): 不良的長度"

#: ../src/msw/dde.cpp:1226
msgid "reentrancy problem."
msgstr "重複進入問題。"

#: ../src/common/datetimefmt.cpp:1979
msgid "second"
msgstr "第二"

#: ../src/html/chm.cpp:337
msgid "seek error"
msgstr "搜尋失敗"

#: ../src/common/fontcmn.cpp:1195 ../src/common/fontcmn.cpp:1215
#| msgid "bold"
msgid "semibold"
msgstr "次粗"

#: ../src/common/datetimefmt.cpp:1994
msgid "seventeenth"
msgstr "第十七"

#: ../src/common/datetimefmt.cpp:1984
msgid "seventh"
msgstr "第七"

#: ../src/common/accelcmn.cpp:193
msgid "shift"
msgstr "shift"

#: ../src/common/appbase.cpp:777
msgid "show this help message"
msgstr "顯示這個說明訊息"

#: ../src/common/datetimefmt.cpp:1993
msgid "sixteenth"
msgstr "第十六"

#: ../src/common/datetimefmt.cpp:1983
msgid "sixth"
msgstr "第六"

#: ../src/common/appcmn.cpp:258
msgid "specify display mode to use (e.g. 640x480-16)"
msgstr "設定顯示模式 (例如 640x480-16)"

#: ../src/common/appcmn.cpp:244
msgid "specify the theme to use"
msgstr "設定佈景主題"

#: ../src/richtext/richtextbuffer.cpp:9340
msgid "standard/circle"
msgstr "標準/圓形"

#: ../src/richtext/richtextbuffer.cpp:9341
msgid "standard/circle-outline"
msgstr "標準/圓框"

#: ../src/richtext/richtextbuffer.cpp:9343
msgid "standard/diamond"
msgstr "標準/菱形"

#: ../src/richtext/richtextbuffer.cpp:9342
msgid "standard/square"
msgstr "標準/方形"

#: ../src/richtext/richtextbuffer.cpp:9344
msgid "standard/triangle"
msgstr "標準/三角形"

#: ../src/common/zipstrm.cpp:2046
msgid "stored file length not in Zip header"
msgstr "Zip 檔頭沒有已存檔案的長度資訊"

#: ../src/common/cmdline.cpp:1487
msgid "str"
msgstr "字串"

#: ../src/common/fontcmn.cpp:1150
msgid "strikethrough"
msgstr "刪除線"

#: ../src/common/tarstrm.cpp:1000 ../src/common/tarstrm.cpp:1022
#: ../src/common/tarstrm.cpp:1504 ../src/common/tarstrm.cpp:1526
msgid "tar entry not open"
msgstr "tar 項目未開啟"

#: ../src/common/datetimefmt.cpp:1987
msgid "tenth"
msgstr "第十"

#: ../src/msw/dde.cpp:1190
msgid "the response to the transaction caused the DDE_FBUSY bit to be set."
msgstr "交涉的回應，設定了 DDE_FBUSY 位元。"

#: ../src/common/fontcmn.cpp:1159
msgid "thin"
msgstr "淡體"

#: ../src/common/datetimefmt.cpp:1980
msgid "third"
msgstr "第三"

#: ../src/common/datetimefmt.cpp:1990
msgid "thirteenth"
msgstr "第十三"

#: ../src/common/datetimefmt.cpp:1784
msgid "today"
msgstr "今天"

#: ../src/common/datetimefmt.cpp:1786
msgid "tomorrow"
msgstr "明天"

#: ../src/common/fileconf.cpp:1951
#, c-format
msgid "trailing backslash ignored in '%s'"
msgstr "'%s' 尾端的斜線將被忽略"

#: ../src/gtk/aboutdlg.cpp:216
msgid "translator-credits"
msgstr ""
"PAL <lyh37@ntu.edu.tw>\n"
"張家偉 <cwahbong@users.sourceforge.net>\n"
"趙惟倫 <bluebat@member.fsf.org>Walter Cheuk <wwycheuk@gmail.com>, 2019."

#. TRANSLATORS: Name of Boolean true value
#: ../src/generic/datavgen.cpp:1064
msgid "true"
msgstr "真"

#: ../src/common/datetimefmt.cpp:1989
msgid "twelfth"
msgstr "第十二"

#: ../src/common/datetimefmt.cpp:1997
msgid "twentieth"
msgstr "第二十"

#. TRANSLATORS: Checkbox state name
#: ../src/common/datavcmn.cpp:2059 ../src/generic/datavgen.cpp:1302
msgid "unchecked"
msgstr "未勾選"

#: ../src/common/fontcmn.cpp:940 ../src/common/fontcmn.cpp:1146
msgid "underlined"
msgstr "加底線"

#. TRANSLATORS: Checkbox state name
#: ../src/common/datavcmn.cpp:2063
msgid "undetermined"
msgstr "未判定"

#: ../src/common/fileconf.cpp:1986
#, c-format
msgid "unexpected \" at position %d in '%s'."
msgstr "不應有 \" 在位置 %d @ '%s'。"

#: ../src/common/tarstrm.cpp:1042
msgid "unexpected end of file"
msgstr "意外的檔案結尾"

#: ../src/common/tarstrm.cpp:369 ../src/common/tarstrm.cpp:392
#: ../src/common/tarstrm.cpp:423 ../src/generic/progdlgg.cpp:379
msgid "unknown"
msgstr "不明"

#: ../src/msw/registry.cpp:150
#, c-format
msgid "unknown (%lu)"
msgstr "不明 (%lu)"

#: ../src/common/xtixml.cpp:253
#, c-format
msgid "unknown class %s"
msgstr "不明類別 %s"

#: ../src/common/lzmastream.cpp:279 ../src/common/lzmastream.cpp:349
#| msgid "compression error"
msgid "unknown compression error"
msgstr "未知壓縮錯誤"

#: ../src/common/lzmastream.cpp:195
#| msgid "decompression error"
msgid "unknown decompression error"
msgstr "未知解壓縮錯誤"

#: ../src/common/regex.cpp:258 ../src/html/chm.cpp:351
msgid "unknown error"
msgstr "不明錯誤"

#: ../src/msw/dialup.cpp:470
#, c-format
msgid "unknown error (error code %08x)."
msgstr "不明錯誤(錯誤碼 %08x)。"

#: ../src/common/fmapbase.cpp:834
#, c-format
msgid "unknown-%d"
msgstr "不明-%d"

#: ../src/common/docview.cpp:505
msgid "unnamed"
msgstr "未命名"

#: ../src/common/docview.cpp:1621
#, c-format
msgid "unnamed%d"
msgstr "未命名-%d"

#: ../src/common/zipstrm.cpp:2060 ../src/common/zipstrm.cpp:2381
msgid "unsupported Zip compression method"
msgstr "不支援的 Zip 壓縮方法"

#: ../src/common/translation.cpp:1944
#, c-format
msgid "using catalog '%s' from '%s'."
msgstr "使用記載檔 '%s' — '%s'。"

#: ../src/html/chm.cpp:335
msgid "write error"
msgstr "寫入失敗"

#: ../src/gtk/glcanvas.cpp:167
msgid ""
"wxGLCanvas is only supported on X11 currently.  You may be able to\n"
"work around this by setting environment variable GDK_BACKEND=x11 before "
"starting\n"
"your program."
msgstr ""
"wxGLCanvas 目前只支援 X11。啟動程式前，你可能需要透過設定\n"
"環境變數 GDK_BACKEND=x11 以避開這問題。"

#: ../src/common/time.cpp:295
msgid "wxGetTimeOfDay failed."
msgstr "wxGetTimeOfDay 失敗。"

#: ../src/motif/app.cpp:242
#, c-format
msgid "wxWidgets could not open display for '%s': exiting."
msgstr "wxWidgets 無法為 '%s' 開啟顯示設備：已經存在。"

#: ../src/x11/app.cpp:170
msgid "wxWidgets could not open display. Exiting."
msgstr "wxWidgets 無法開啟顯示設備。程式結束中。"

#: ../src/richtext/richtextsymboldlg.cpp:434
msgid "xxxx"
msgstr "xxxx"

#: ../src/common/datetimefmt.cpp:1785
msgid "yesterday"
msgstr "昨天"

#: ../src/common/zstream.cpp:251 ../src/common/zstream.cpp:426
#, c-format
msgid "zlib error %d"
msgstr "zlib 錯誤碼 %d"

#: ../src/richtext/richtextbulletspage.cpp:288
#: ../src/richtext/richtextliststylepage.cpp:496
msgid "~"
msgstr "~"