GitHub-Proxy/Slic3r
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git synced 2025-08-14 00:55:54 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge pull request #18 from photog0411/english-patch-1

Browse Source 
English patch 1
This commit is contained in:
Merill 2018-12-16 00:35:05 +01:00 committed by GitHub
commit dc74caa8e8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 14 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
xs/src/libslic3r/PrintConfig.cpp
View File

@ -357,17 +357,17 @@ PrintConfigDef::PrintConfigDef()
def = this->add("enforce_full_fill_volume", coBool);
def->label = L("Enforce 100% fill volume");
def->category = L("Infill");
def->tooltip = L("Experimental option wich modify (in solid infill) fill flow to have the exact amount of plastic inside the volume to fill "
def->tooltip = L("Experimental option which modifies (in solid infill) fill flow to have the exact amount of plastic inside the volume to fill "
"(it generally changes the flow from -7% to +4%, depending on the size of the surface to fill and the overlap parameters, "
"but it can go as high as +50% for infill in very small area where rectilinear doesn't have a good coverage). It has the advantage "
"to remove the over-extrusion seen in thin infill area, from the overlap ratio");
"but it can go as high as +50% for infill in very small areas where rectilinear doesn't have good coverage). It has the advantage "
"to remove the over-extrusion seen in thin infill areas, from the overlap ratio");
def->cli = "enforce-full-fill-volume!";
def->default_value = new ConfigOptionBool(true);
def = this->add("external_infill_margin", coFloat);
def->label = L("Default");
def->category = L("Infill");
def->tooltip = L("This parameter grow the top/bottom/solid layers by some mm to anchor them into the part. Put 0 to deactivate it.");
def->tooltip = L("This parameter grows the top/bottom/solid layers by the specified MM to anchor them into the part. Put 0 to deactivate it.");
def->sidetext = L("mm");
def->cli = "top-layer-anchor=f";
def->min = 0;
@ -376,7 +376,7 @@ PrintConfigDef::PrintConfigDef()
def = this->add("bridged_infill_margin", coFloat);
def->label = L("Bridged");
def->category = L("Infill");
def->tooltip = L("This parameter grow the bridged solid infill layers by some mm to anchor them into the part. Put 0 to deactivate it.");
def->tooltip = L("This parameter grows the bridged solid infill layers by the specified MM to anchor them into the part. Put 0 to deactivate it.");
def->sidetext = L("mm");
def->cli = "top-layer-anchor=f";
def->min = 0;
@ -416,7 +416,7 @@ PrintConfigDef::PrintConfigDef()
def->label = L(" ");
def->category = L("Layers and Perimeters");
def->tooltip = L("Join the perimeters to create only one continuous extrusion without any z-hop."
" Long inside travel (from external to holes) are not extruded to give some place to the infill.");
" Long inside travel (from external to holes) are not extruded to give some space to the infill.");
def->cli = "loop-perimeter!";
def->default_value = new ConfigOptionBool(false);
@ -922,8 +922,8 @@ PrintConfigDef::PrintConfigDef()
def = this->add("gap_fill", coBool);
def->label = L("Gap fill");
def->category = L("Advanced");
def->tooltip = L("Enable gap fill algorithm. It will extrude small lines between perimeter "
"when there are not enough space for an other perimeter or an infill.");
def->tooltip = L("Enable gap fill algorithm. It will extrude small lines between perimeters "
"when there is not enough space for another perimeter or an infill.");
def->cli = "gap-fill!";
def->default_value = new ConfigOptionBool(true);
@ -1003,8 +1003,8 @@ PrintConfigDef::PrintConfigDef()
def = this->add("infill_dense", coBool);
def->label = ("");
def->category = L("Infill");
def->tooltip = L("Enable the creation of a support layer under the first solid layer. Allow to use lower infill ratio without compromizing the top quality."
" The dense infill is layed out with a 50% infill density.");
def->tooltip = L("Enables the creation of a support layer under the first solid layer. This allows you to use a lower infill ratio without compromising the top quality."
" The dense infill is laid out with a 50% infill density.");
def->cli = "infill-dense!";
def->default_value = new ConfigOptionBool(false);
@ -1425,7 +1425,7 @@ PrintConfigDef::PrintConfigDef()
def = this->add("no_perimeter_unsupported", coBool);
def->label = L("");
def->category = L("Layers and Perimeters");
def->tooltip = L("Experimental option to remove perimeters where there are nothing under and where a bridged infill should be better. Computationaly intensive!");
def->tooltip = L("Experimental option to remove perimeters where there is nothing under it and where a bridged infill should be better. Computationally intensive!");
def->cli = "no-perimeter-unsupported!";
def->default_value = new ConfigOptionBool(false);
@ -1438,9 +1438,9 @@ PrintConfigDef::PrintConfigDef()
def->default_value = new ConfigOptionInt(0);
def = this->add("noperi_bridge_only", coBool);
def->label = L("Only on briged area");
def->label = L("Only on bridged areas");
def->category = L("Layers and Perimeters");
def->tooltip = L("Only remove perimeters over area marked as 'bridge'. Can be useful to let perimeter run over overhangs, but it's not very reliable.");
def->tooltip = L("Only remove perimeters over areas marked as 'bridge'. Can be useful to let perimeter run over overhangs, but it's not very reliable.");
def->cli = "noperi-bridge-only!";
def->default_value = new ConfigOptionBool(true);

2
xs/src/slic3r/GUI/Tab.cpp
View File

@ -846,7 +846,7 @@ void TabPrint::build()
optgroup = page->new_optgroup(_(L("Reducing printing time")));
optgroup->append_single_option_line("infill_every_layers");
optgroup->append_single_option_line("infill_only_where_needed");
line = { _(L("Suporting dense layer")), "" };
line = { _(L("Supporting dense layer")), "" };
line.append_option(optgroup->get_option("infill_dense"));
line.append_option(optgroup->get_option("infill_dense_algo"));
optgroup->append_line(line);