supermerill
3de87d3d42
assert triggering
...
todo: check if it's dangerous, seems not.
2021-10-25 17:55:28 +02:00
supermerill
7ac7a0af15
Allow to choose between M73 and M117 for remaining_times
...
supermerill/SuperSlicer#1693
2021-10-25 17:55:06 +02:00
supermerill
09a1d4656e
Fix cli slice without config load
...
supermerill/SuperSlicer#1691
2021-10-25 00:56:59 +02:00
supermerill
214bf79eaf
supermerill/SuperSlicer#1634
2021-10-25 00:01:42 +02:00
supermerill
358956c445
Add Colour Change G-code, Pause Print G-code, Template Custom G-code into the gui
...
supermerill/SuperSlicer#1681
2021-10-24 13:22:08 +02:00
supermerill
42ce221e33
Fix 'one perimeter on first layer'
...
supermerill/SuperSlicer#1687
2021-10-24 11:42:51 +02:00
supermerill
75b59455b6
add logs for issue supermerill/SuperSlicer#1631
2021-10-23 12:02:45 +02:00
supermerill
46549625d5
Dense Infill: reduced unneeded usage of "full fill"
...
supermerill/SuperSlicer#1671
2021-10-23 11:09:57 +02:00
supermerill
da3e64c1c9
Fix layer_z for feature_gcode
2021-10-23 00:00:22 +02:00
supermerill
c12542d832
fan delay & kickstart fixes
...
now shouldn't be crazy like before.
supermerill/SuperSlicer#1665
supermerill/SuperSlicer#1530
supermerill/SuperSlicer#939
supermerill/SuperSlicer#834
supermerill/SuperSlicer#714
2021-10-22 20:14:12 +02:00
supermerill
499c2d45df
Fix crash when layer_height is 0
...
supermerill/SuperSlicer#1664
2021-10-22 19:59:28 +02:00
supermerill
1f48f32a61
Increase the offset from 37838be to fix some more problematic cases
...
supermerill/SuperSlicer#1641
2021-10-22 19:59:22 +02:00
supermerill
462e1f06f1
update create_release script: clean dir after zip/untar
2021-10-22 19:59:16 +02:00
supermerill
58c73b1023
dense_infill (automatic) rework
...
* better coverage
* now print in the right sequence
* fixed overlap (20% of bridge width) with everything for a good grip
supermerill/SuperSlicer#1657
2021-10-22 19:59:06 +02:00
supermerill
240a282625
fix default arrange distance when 0 and when opening the slicer.
...
supermerill/SuperSlicer#1648
2021-10-19 23:35:22 +02:00
supermerill
52e58ff357
Allow to set the top fill for spiral vase.
2021-10-14 00:08:37 +02:00
supermerill
f900d80e93
fix the Fix for no_perimeter_unsupported_algo (a4caa5)
...
assign instead of insert...
supermerill/SuperSlicer#1621
2021-10-11 17:53:31 +02:00
supermerill
e53f60dc1a
Fix crash from perimeter_loop one-point loop
...
supermerill/SuperSlicer#1623
Fixme: take the first object from this issue project
and you can see some bad lines at layer 31.
2021-10-11 16:51:16 +02:00
supermerill
9328681428
Fix bad check for default_acceleration when diabled and exporting config.
...
supermerill/SuperSlicer#1622
2021-10-10 15:28:36 +02:00
supermerill
37838be7cf
Fix a clipper bug when a line in a polyline is horizontal.
...
Have to do a hack to prevent horizontal lines.
If someone can modify clipper to take into account this corner case,
please submit a fix. But maybe it's better to go to clipper2 directly.
Note: I tested with clipper 6.4.2, but it doesn't fix this bug.
supermerill/SuperSlicer#1624
2021-10-10 01:14:32 +02:00
supermerill
812dfdb484
fix filament override for coFloatOrPercent / coFloatsOrPercents
...
supermerill/SuperSlicer#1618
2021-10-08 12:29:37 +02:00
Dave Bullock
5d711f2420
Increase max wipe speed for Voron ERCF wipe towers ( #1568 )
...
* Increase max wipe speed for Voron ERCF wipe towers from 200 to 400
2021-10-07 22:22:37 +02:00
supermerill
54ad2a8611
Change retract_restart_extra_toolchange behavior to trigger at each first tool unretraction (but the very first)
...
supermerill/SuperSlicer#1052
2021-10-07 22:19:07 +02:00
supermerill
666851acd5
Fix color update on fresh extruder
2021-10-07 20:49:21 +02:00
supermerill
2eaa677f88
Increase bridge area a bit for overhang perimeter addition, to tame it a bit.
...
supermerill/SuperSlicer#1514
2021-10-07 19:18:46 +02:00
supermerill
de554d577b
Fix wrong boundingbox (don't rotate the boudingbox, rotate the object!)
...
supermerill/SuperSlicer#1612
2021-10-07 18:34:06 +02:00
supermerill
5abd2fcd32
now "no perimeter on bridges" -> "only bridges" follow bridged_infill_margin
...
supermerill/SuperSlicer#1155
2021-10-07 14:29:07 +02:00
supermerill
7ca6641dcb
Polyholes now don't recognize rectangle as badly made circle.
...
supermerill/SuperSlicer#1561
2021-10-07 12:31:56 +02:00
supermerill
f3a11c3684
Fix Bridge flow calibration text with first layer height of 0.3 for a 0.4 nozzle
...
supermerill/SuperSlicer#1462
2021-10-06 13:45:04 +02:00
supermerill
6b0326e77c
fix small tab icon
...
supermerill/SuperSlicer#1605
2021-10-04 13:42:28 +02:00
supermerill
1e7bd53668
add seam_gap for hiding seam on loops
...
also finish coFloatsOrPercents, as it's the first setting to use this.
supermerill/SuperSlicer#1534
supermerill/SuperSlicer#1606
2021-10-04 13:42:10 +02:00
supermerill
a4caa5d1c3
Fix no_perimeter_unsupported_algo by detecting each bridged area independently.
...
Apply also the fix for extra overhang detection
bridge_angle now invalidate perimeters
supermerill/SuperSlicer#1595
2021-10-02 19:41:10 +02:00
supermerill
8790970bd6
change discover_vertical_shells() from polygons to expolygons
...
small improvement to nb_perimeter_layers_for_solid_fill culling
supermerill/SuperSlicer#1581
2021-10-02 16:53:12 +02:00
supermerill
5ad1ee501b
Emit error if max layer height > nozzle diameter
2021-10-02 14:57:25 +02:00
supermerill
344c821382
Move Extruder decimals from extruder to printer
...
supermerill/SuperSlicer#1596
2021-10-02 14:57:15 +02:00
supermerill
64937e2380
medial axis optimisation
2021-10-01 15:11:36 +02:00
supermerill
6e49c80f01
fix serialization issues from 86bcc1a0
2021-10-01 15:11:31 +02:00
supermerill
8bdab557c3
fix gcode viewer (plater redraw notification)
...
supermerill/SuperSlicer#1542
2021-10-01 15:11:01 +02:00
supermerill
b66026342a
increased precision for overhang detection
...
supermerill/SuperSlicer#1562
2021-10-01 15:10:55 +02:00
supermerill
1e146e6a57
setting renamed default -> internal perimeter
...
supermerill/SuperSlicer#1567
supermerill/SuperSlicer#1521
2021-10-01 15:10:46 +02:00
supermerill
73f4f4783b
fix first_layer_size_compensation
...
fix 4028cd2a1b7d7eb33c8e2be38b84069fd633abd1
supermerill/SuperSlicer#1547
2021-09-27 15:23:40 +02:00
supermerill
a67a862dc1
fix bridge_internal_fan_speed when equal or lower than default speed
...
supermerill/SuperSlicer#1414
2021-09-27 15:06:40 +02:00
supermerill
f71cd1d062
fix zero max layer height
...
supermerill/SuperSlicer#1569
fix commit 26500cd9a019578c6f21763a6596d4ea3a3ed31f
2021-09-27 14:07:09 +02:00
supermerill
f8ca156bf5
add include for archlinux
...
supermerill/SuperSlicer#703
2021-09-27 13:16:38 +02:00
supermerill
b16ecbfcb1
allow retract_lift_first_layer even when 0 lift to activate extra lift for first move before each object on first layer
...
supermerill/SuperSlicer#1575
2021-09-27 13:06:21 +02:00
supermerill
f711601a66
fix spiral vase enforce settings
...
The "ensure vertical shell wall" is enforced in spiral vase mode to extend the bottom of the vase to the vase hull.
supermerill/SuperSlicer#1582
2021-09-26 23:58:30 +02:00
supermerill
9f9f544bb9
fix seam placer when each object has its own layers
...
use layer_z instead of layer_id
2021-09-26 23:38:34 +02:00
supermerill
f138405bba
fix gapfill bits on outer edge of curves
...
medial_axis fusion_corners fix
using supermerill/SuperSlicer#1583 project to reproduce
2021-09-26 23:37:30 +02:00
supermerill
3f796cdf78
fix circular bed diameter rounding to 1um
...
supermerill/SuperSlicer#1584
2021-09-26 21:43:48 +02:00
supermerill
4a0b2e681b
typo
2021-09-26 21:21:15 +02:00
