Optimise Ultimaker 2+ polypropylene profiles

These are optimised to the level of the materials: Anything that is common between quality profiles with the same material and nozzle gets bubbled to the profile for that material (per nozzle). It doesn't bubble any further (to the variant) because that could have an impact on the other profiles.
This basically only removes settings because where these settings then bubble to is the material profile in the fdm_materials repository. And a lot of settings are just removed because they are equal to the default.

Contributes to issue CURA-3960.

resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg

@@ -11,23 +11,17 @@ quality_type = fast
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
@@ -38,44 +32,34 @@ infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
 layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
-retraction_extra_prime_amount = 0
 retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
 skin_overlap = 10
-speed_infill = =speed_print
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -85,9 +69,7 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.8
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
-wall_thickness = 0.76
+wall_thickness = 0.76

resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg

@@ -11,23 +11,17 @@ quality_type = normal
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
@@ -38,44 +32,33 @@ infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
-retraction_extra_prime_amount = 0
 retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
 skin_overlap = 10
-speed_infill = =speed_print
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -85,9 +68,7 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.8
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
-wall_thickness = 0.76
+wall_thickness = 0.76

resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg

@@ -10,54 +10,40 @@ weight = 0
 quality_type = draft
 
 [values]
-layer_height = 0.2
-gradual_infill_steps = 3
-retraction_extra_prime_amount = 0
-skirt_brim_line_width = 0.6
-infill_overlap_mm = 0
-skin_overlap = 10
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
 infill_line_width = =round(line_width * 0.6 / 0.57, 2)
 infill_overlap = 0
+infill_overlap_mm = 0
 infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
+layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
 retraction_extrusion_window = 1
 retraction_hop = 0.15
@@ -65,19 +51,17 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
+skin_overlap = 10
-speed_infill = =speed_print
+skirt_brim_line_width = 0.6
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
-wall_thickness = 1.14
+wall_thickness = 1.14

resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg

@@ -10,54 +10,40 @@ weight = -1
 quality_type = fast
 
 [values]
-layer_height = 0.15
-gradual_infill_steps = 3
-retraction_extra_prime_amount = 0
-skirt_brim_line_width = 0.6
-infill_overlap_mm = 0
-skin_overlap = 10
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
 infill_line_width = =round(line_width * 0.6 / 0.57, 2)
 infill_overlap = 0
+infill_overlap_mm = 0
 infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
+layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
 retraction_extrusion_window = 1
 retraction_hop = 0.15
@@ -65,19 +51,17 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
+skin_overlap = 10
-speed_infill = =speed_print
+skirt_brim_line_width = 0.6
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
-wall_thickness = 1.14
+wall_thickness = 1.14

resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg

@@ -10,54 +10,40 @@ weight = 0
 quality_type = draft
 
 [values]
-layer_height = 0.3
-gradual_infill_steps = 3
-retraction_extra_prime_amount = 0
-skirt_brim_line_width = 0.8
-infill_overlap_mm = 0
-skin_overlap = 10
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
 infill_line_width = =round(line_width * 0.8 / 0.76, 2)
 infill_overlap = 0
+infill_overlap_mm = 0
 infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
+layer_height = 0.3
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
 retraction_extrusion_window = 1
 retraction_hop = 0.15
@@ -65,19 +51,17 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
+skin_overlap = 10
-speed_infill = =speed_print
+skirt_brim_line_width = 0.8
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
 wall_thickness = 1.52

resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg

@@ -10,54 +10,40 @@ weight = 0
 quality_type = fast
 
 [values]
-layer_height = 0.2
-gradual_infill_steps = 3
-retraction_extra_prime_amount = 0
-skirt_brim_line_width = 0.8
-infill_overlap_mm = 0
-skin_overlap = 10
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 3
+gradual_infill_steps = 3
 infill_line_width = =round(line_width * 0.8 / 0.76, 2)
 infill_overlap = 0
+infill_overlap_mm = 0
 infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
+layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
 retraction_extrusion_window = 1
 retraction_hop = 0.15
@@ -65,19 +51,17 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
+skin_overlap = 10
-speed_infill = =speed_print
+skirt_brim_line_width = 0.8
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
 wall_thickness = 1.52