Optimise new profiles

This removes all settings that are equal to the defaults. Some settings are 'common' between all profiles of the same material. I've let those settings bubble up to the material profiles but that change is then obviously only apparent in the fdm_materials repository.

Contributes to issue CURA-3960.

resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg

@@ -12,21 +12,8 @@ setting_version = 1
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
@@ -34,34 +21,19 @@ cool_min_speed = 2.5
 infill_line_width = =round(line_width * 0.38 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 infill_wipe_dist = 0.1
 jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
 layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 85
 material_bed_temperature_layer_0 = 90
 material_final_print_temperature = 205
-material_flow = 100
 material_initial_print_temperature = 210
 material_print_temperature = 215
 material_print_temperature_layer_0 = 220
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
@@ -75,33 +47,19 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-retraction_speed = 35
-skin_overlap = 15
 speed_equalize_flow_enabled = True
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 300
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
-speed_wall_x = =speed_wall
 support_angle = 50
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 1.2
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg

@@ -12,21 +12,8 @@ setting_version = 1
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
@@ -34,39 +21,23 @@ cool_min_speed = 2.5
 infill_line_width = =round(line_width * 0.38 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 infill_wipe_dist = 0.1
 jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
 layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 85
 material_bed_temperature_layer_0 = 90
 material_final_print_temperature = 195
-material_flow = 100
 material_initial_print_temperature = 205
 material_print_temperature = 207
 material_print_temperature_layer_0 = 210
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_amount = 7
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
@@ -75,33 +46,20 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-retraction_speed = 35
-skin_overlap = 15
 speed_equalize_flow_enabled = True
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 300
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
-speed_wall_x = =speed_wall
 support_angle = 50
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -12,21 +12,8 @@ setting_version = 1
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
@@ -34,39 +21,22 @@ cool_min_speed = 2.5
 infill_line_width = =round(line_width * 0.38 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 infill_wipe_dist = 0.1
 jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 85
 material_bed_temperature_layer_0 = 90
 material_final_print_temperature = 195
-material_flow = 100
 material_initial_print_temperature = 200
 material_print_temperature = 205
 material_print_temperature_layer_0 = 208
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_amount = 7
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
@@ -75,33 +45,20 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 18
-retraction_speed = 35
-skin_overlap = 15
 speed_equalize_flow_enabled = True
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 300
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
-speed_wall_x = =speed_wall
 support_angle = 50
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = =line_width * 3

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -36,9 +36,7 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
@@ -48,6 +46,7 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
+skin_overlap = 5
 speed_equalize_flow_enabled = True
 speed_layer_0 = 18
 speed_print = 25
@@ -56,7 +55,6 @@ speed_travel = 300
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
 support_angle = 50
-skin_overlap = 5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -36,9 +36,7 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_amount = 7
 retraction_count_max = 12

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -34,9 +34,7 @@ material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
-prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8

resources/quality/ultimaker3/um3_aa0.8_CPEP_Draft_Print.inst.cfg

@@ -11,88 +11,26 @@ weight = -2
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-cool_fan_speed = 8
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.9375
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 10
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_wipe_enabled = True
-retraction_amount = 6.5
 retraction_combing = off
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 0.1
 retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 15
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height
-switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg

@@ -11,88 +11,28 @@ weight = -2
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-cool_fan_speed = 8
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
 layer_height = 0.4
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.9375
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
 prime_tower_enable = True
-prime_tower_wipe_enabled = True
-retraction_amount = 6.5
 retraction_combing = off
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 0.1
 retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 8
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height
-switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg

@@ -11,88 +11,28 @@ weight = -1
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-cool_fan_speed = 8
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
 layer_height = 0.3
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.9375
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 7
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
 prime_tower_enable = True
-prime_tower_wipe_enabled = True
-retraction_amount = 6.5
 retraction_combing = off
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 0.1
 retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 10
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height
-switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_PC_Draft_Print.inst.cfg

@@ -11,91 +11,20 @@ weight = 0
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_wipe_enabled = True
 raft_airgap = 0.5
 raft_margin = 15
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 15
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg

@@ -11,91 +11,20 @@ weight = -2
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
 layer_height = 0.4
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 107
-material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_wipe_enabled = True
 raft_airgap = 0.5
 raft_margin = 15
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 8
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg

@@ -11,91 +11,21 @@ weight = -1
 setting_version = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
 infill_before_walls = True
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
 layer_height = 0.3
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 107
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_wipe_enabled = True
 raft_airgap = 0.5
 raft_margin = 15
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 0
-speed_infill = =speed_print
 speed_layer_0 = 15
-speed_prime_tower = =speed_topbottom
 speed_print = 50
 speed_slowdown_layers = 10
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
 support_line_width = =round(line_width * 0.6 / 0.7, 2)
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg

@@ -12,7 +12,6 @@ setting_version = 1
 
 [values]
 brim_width = 25
-cool_fan_speed = 10
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 expand_skins_expand_distance = =line_width * 2
@@ -21,15 +20,12 @@ expand_upper_skins = True
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_flow = 100
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -38,17 +34,11 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_hop_only_when_collides = True
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-skin_overlap = 5
-speed_print = 35
-speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_travel = 300
-speed_wall = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
@@ -60,4 +50,3 @@ travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
 wall_thickness = 1.6
-

resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -12,7 +12,6 @@ setting_version = 1
 
 [values]
 brim_width = 25
-cool_fan_speed = 10
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 expand_skins_expand_distance = =line_width * 2
@@ -21,15 +20,12 @@ expand_upper_skins = True
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_flow = 100
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -38,17 +34,11 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_hop_only_when_collides = True
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-skin_overlap = 5
-speed_print = 35
-speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_travel = 300
-speed_wall = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
@@ -60,4 +50,3 @@ travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
 wall_thickness = 1.6
-

resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -12,7 +12,6 @@ setting_version = 1
 
 [values]
 brim_width = 25
-cool_fan_speed = 10
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 expand_skins_expand_distance = =line_width * 2
@@ -21,15 +20,12 @@ expand_upper_skins = True
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-infill_sparse_density = 20
 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.3
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_flow = 100
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -38,17 +34,11 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_hop_only_when_collides = True
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-skin_overlap = 5
-speed_print = 35
-speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_travel = 300
-speed_wall = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_angle = 60
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
@@ -60,4 +50,3 @@ travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
 wall_thickness = 1.6
-

resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -33,7 +33,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -42,7 +41,6 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
-retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -65,4 +63,3 @@ travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
-

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -34,7 +34,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -43,7 +42,6 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
-retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -66,4 +64,3 @@ travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
-

resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -33,7 +33,6 @@ material_final_print_temperature = =material_print_temperature - 21
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
@@ -42,7 +41,6 @@ retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
-retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -65,4 +63,3 @@ travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
-