TheAssassin
8f1d3e62d2
Add definition for Tevo Tarantula printer
...
Modified version of the Prusa i3's definition. While the i3 values work,
the print time estimations were horribly imprecise (often the print
takes 2x to 3x as long as Cura estimated). Therefore, I inspected the
problem, and found a Reddit thread [1] about it. Instead of hacking my
own installation, I just wrote a defition including the correct
acceleration/jerk values that work with my firmware (custom build of
Marlin based on https://github.com/JimBrown/MarlinTarantula/ ).
There's downsides however. I don't know how it performs with the stock
firmware (although I doubt there'd be many differences). Furthermore,
the `jerk_xy` is set to 4 in my definition, but that's only true for
the `x`value,the Marlin firmware has a `y` jerk value of 7. That leads
to minor differences in the printing time (e.g., just finished a print
which Cura estimated with 13h 30m, but it took 12h 50m).
Feedback from stock firmware users is therefore highly welcome. Also, if
someone could provide information about the jerk values and help
improving those inaccuracies, that'd be awesome.
[1] https://www.reddit.com/r/3Dprinting/comments/5wz0xs/
2017-09-28 17:38:47 +02:00
Jaime van Kessel
8313ea3d23
Merge pull request #2512 from fieldOfView/fix_cura_connect_hi_dpi
...
Apply screenScaleFactor to Cura Connect UI
2017-09-28 17:35:42 +02:00
fieldOfView
1715f0578d
Apply screenScaleFactor to Cura Connect UI
...
Any pixel size specified in QML should not either use UM.Theme.getSize(), or use screenScaleFactor to make sure the pixel size is as intended on OSX, Windows and Linux regardless of display DPI.
Contributes to CURA-4376
2017-09-28 15:42:52 +02:00
Ghostkeeper
15f09d0757
Merge branch '3.0'
2017-09-28 15:33:13 +02:00
Ghostkeeper
92c407580a
Comment out visibility of flow temperature graph
...
Apparently it's not allowed to be in there. By being commented out I hope that a future developer won't make the same mistake and add it there to be editable in the interface.
2017-09-28 15:33:00 +02:00
Ghostkeeper
fd8ca69581
Comment out visibility of flow temperature graph
...
Apparently it's not allowed to be in there. By being commented out I hope that a future developer won't make the same mistake and add it there to be editable in the interface.
2017-09-28 15:32:25 +02:00
jack
585b1dea3a
Merge pull request #2508 from Ultimaker/CL-118_config_change
...
CL-118 Add support and text for disabled printers and print jobs which require config changes.
2017-09-28 15:15:51 +02:00
Mark
fded206cc3
Merge branch '3.0'
2017-09-28 15:04:52 +02:00
Mark
4e4e71ad4b
Change AGPL to LGPL
2017-09-28 15:04:24 +02:00
Simon Edwards
8658053a3b
Improved status messages, and the 'printing' counter in the sidebar.
...
CL-118
2017-09-28 14:37:38 +02:00
Ghostkeeper
5e7445fc8b
Merge branch '3.0'
2017-09-28 13:24:18 +02:00
alekseisasin
2a302a3e27
Merge branch '3.0' of github.com:Ultimaker/cura into 3.0
2017-09-28 13:24:13 +02:00
Ghostkeeper
5d4a2ae097
Remove erroneously added CuraEngine
...
Bad. Bad
2017-09-28 13:23:54 +02:00
alekseisasin
5402092bb4
During adding a new printer the printer name generated from default name and not from custom name (changed by user)
...
CURA-4345
2017-09-28 13:22:15 +02:00
Mark
b4154b8cc0
Merge branch '3.0'
2017-09-28 13:01:10 +02:00
Mark
9a193ad5c5
Changing AGPLv3 to LGPLv3
2017-09-28 13:00:43 +02:00
Mark
729d61082a
add CuraEngine to gitignore
2017-09-28 12:58:03 +02:00
Simon Edwards
01ff608a09
Change "Required action" to "Action required"
...
CL-118
2017-09-28 11:40:48 +02:00
Simon Edwards
4ca8bc5a9e
CL-118 Add support and text for disabled printers and print jobs which require config changes.
2017-09-28 11:25:34 +02:00
ChrisTerBeke
c4c9375bc3
Merge branch '3.0'
2017-09-28 09:35:48 +02:00
ChrisTerBeke
07899ba798
Merge branch 'feature_hide_gradual_infill' into 3.0
2017-09-28 09:34:25 +02:00
ChrisTerBeke
ca277da35c
Merge branch '3.0'
2017-09-28 09:22:15 +02:00
ChrisTerBeke
bff79c63d5
Merge branch '3.0' of https://github.com/Ultimaker/Cura into 3.0
2017-09-28 09:21:53 +02:00
ChrisTerBeke
8f4692b3bb
Merge branch '3.0' into FieldOfView/fix_quality_disabled_alignment
2017-09-28 09:19:13 +02:00
Ghostkeeper
3fa281084f
Merge branch '3.0'
2017-09-28 09:17:55 +02:00
Ghostkeeper
2884e1e5b5
Merge branch '3.0' of github.com:Ultimaker/Cura into 3.0
2017-09-28 09:17:40 +02:00
ChrisTerBeke
f2e362838e
Merge branch 'fix_quality_disabled_alignment' of https://github.com/FieldOfView/Cura into FieldOfView/fix_quality_disabled_alignment
2017-09-28 09:16:52 +02:00
fieldOfView
0b03681890
Hide gradual infill checkbox if the gradual infill steps setting is disabled
2017-09-27 22:28:20 +02:00
Ghostkeeper
c4fc4a7198
Add better descriptions for abbreviated units
...
This should help the translators next time to find better translations.
Contributes to issue CURA-4341.
2017-09-27 17:34:12 +02:00
Ghostkeeper
e56a6214d2
Fix grammar mistake
...
These are two sentences.
Contributes to issue CURA-4341.
2017-09-27 17:33:17 +02:00
Ghostkeeper
d999d1c7f2
Remove extra space
...
Just a typo.
Contributes to issue CURA-4341.
2017-09-27 17:32:47 +02:00
Ghostkeeper
df14ea2b1a
Proper capitalisation of 'OK'
...
This is consistent with the rest.
Contributes to issue CURA-4341.
2017-09-27 17:32:24 +02:00
Ghostkeeper
2715ef604d
Use lower case text for translation, then transform to upper case
...
The formatting is done in QML, regardless of how the data looks.
Contributes to issue CURA-4341.
2017-09-27 17:31:26 +02:00
Ghostkeeper
94846d0faf
Add missing word
...
I'm guessing it was 'This'. That must've accidentally gotten selected when working with it.
Contributes to issue CURA-4341.
2017-09-27 17:30:29 +02:00
Ghostkeeper
68b4dfd3c3
Fix spelling mistake
...
Contributes to issue CURA-4341.
2017-09-27 17:29:30 +02:00
Ghostkeeper
fcc914cf0d
Make material colour indication a circle instead of square
...
The rest of them are circles. This one should be one too.
2017-09-27 17:28:32 +02:00
Ghostkeeper
33fdca4a6b
Fix mistakes in translations from Bothof
...
What do we pay these guys for?
Contributes to issue CURA-4341.
2017-09-27 17:27:47 +02:00
Ghostkeeper
609187a4ce
Update translations from Bothof
...
These are the new translations we got from Bothof for German, Spanish, Finnish, French, Italian, Dutch, Turkish and Simplified Chinese.
Contributes to issue CURA-4341.
2017-09-27 17:26:29 +02:00
Diego Prado Gesto
dcf07e4f35
Merge branch '3.0' of https://github.com/Ultimaker/Cura into 3.0
2017-09-27 17:25:22 +02:00
Diego Prado Gesto
0731f942ae
Merge branch 'fix_infill_slider_rounding' into 3.0
2017-09-27 17:24:41 +02:00
Diego Prado Gesto
f8722a2d4b
Fixed code style in the function - CURA-4352
2017-09-27 17:21:43 +02:00
fieldOfView
47ad68bda7
Show ticks when they are not available
2017-09-27 17:20:55 +02:00
fieldOfView
87c7373cb0
Fix visibility when there are ticks but no available ticks
2017-09-27 17:14:41 +02:00
ChrisTerBeke
3ddb45160d
Update infill slider icon border color to not look like a checkbox, fixes #2487
2017-09-27 16:59:03 +02:00
ChrisTerBeke
e948f54ada
Merge branch 'fix_quality_disabled_alignment' of https://github.com/FieldOfView/Cura into FieldOfView/fix_quality_disabled_alignment
2017-09-27 16:37:40 +02:00
Jaime van Kessel
fa66f2c117
Merge pull request #2481 from krisrok/master
...
refine abort sequence
2017-09-27 16:18:13 +02:00
Diego Prado Gesto
c03d54f598
Merge branch '3.0' into fix_infill_slider_rounding
2017-09-27 16:11:10 +02:00
Diego Prado Gesto
4b3e83f876
Not allowing to modify the number of extruders in multiextruder printers, except Custom FDM printers - CURA-4359
2017-09-27 15:55:34 +02:00
fieldOfView
3be8f45636
Move the quality indicator to the center when there is only one quality available
...
Fixes #2485
CURA-4383
2017-09-27 15:18:53 +02:00
ChrisTerBeke
83e612c1c1
Merge branch '3.0' of https://github.com/Ultimaker/Cura into 3.0
2017-09-27 14:51:34 +02:00
