254 Commits

Author SHA1 Message Date
c.lamboo
74678bf6fb Bumb version for profiles
CURA-11526
2024-03-15 11:59:09 +01:00
c.lamboo
597fbb06a0 Revert "Bumb version in profiles"
This reverts commit 3aa32298dc54f734d4ddd4fc506fb94ea86e63a2.
2024-03-15 11:44:37 +01:00
c.lamboo
3aa32298dc Bumb version in profiles
CURA-11526
2024-03-15 10:28:16 +01:00
c.lamboo
501b15753d Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
This reverts commit 5a291f9ba9e83c85d1bdfe1c0e907e0df8154f6f.
2024-02-22 16:20:39 +01:00
wawanbreton
6c8ee8d98a Applied printer-linter format 2024-02-16 08:05:52 +00:00
Erwan MATHIEU
5a291f9ba9 Change prime_tower_enable to prime_tower_mode in all defs/profiles 2024-02-16 09:04:48 +01:00
Frederic Meeuwissen
52cff80161 Move temperature deltas to quality profiles
Have one level (quality containers) where all temperature deltas compared to base temperature (in material container) are defined
2023-06-27 17:47:55 +02:00
Remco Burema
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim 2023-04-20 23:31:37 +02:00
Jelle Spijker
28d6e993df
Bump up setting version to 22 2023-03-31 07:24:43 +02:00
Rijk van Manen
957ea8541f enable support brim by default
remove all support brim mention in the profiles and move this to ultimaker.def.json
PP-249
2023-02-15 13:29:58 +01:00
rijkvanmanen
651d278377 Applied printer-linter format 2023-02-09 14:29:26 +01:00
Rijk van Manen
0735748dee cool_min_temperature can now follow default
PP-71
2023-02-09 14:29:16 +01:00
Rijk van Manen
9088ab23f4 cleanup initial print temperatures
In the initial PR for PP-71 I only cleaned up material_final_print_temperatures, but now the material_initial_print_temperatures are also coming into play, so I cleaned those as well. From research for PP-123 I know this is a safe change. Due to this cleanup the cool_min_temperature can now always follow the ultimaker default settings.
2023-02-09 14:28:11 +01:00
c.lamboo
046d6ab01c Re-enable support towers
Decrease `support_offset` setting as using both support towers and support horizontal expansion would apply the same concept twice.
Remove duplicate settings in other ultimaker profiles.

Contributes to CURA-10220

Co-authored-by: Rijk van Manen <rijk.vanmanen@ultimaker.com>
2023-02-08 16:01:08 +01:00
Rijk van Manen
2888a6132e increase cool_min_temperature
By default the cool_min_temperature is 15deg below print temperature. However, for PP and TPU this should be 10deg below print temperature. This is already changed for the other ultimaker printers, but I forget the UM3.
PP-71

(cherry picked from commit 0b1b19f0b19b9ac4a277a1856842f79189938867)
2023-02-03 10:46:02 +01:00
jspijker
d2f5d059cb Bump up the settings version to 21 in profiles/definitions
Contributes to CURA-10077
2023-01-30 11:40:04 +01:00
Rijk van Manen
5aa7dcf62a align cool_min_temperature and material_final_printing_temperature
Both the material_final_printing_temperature and the cool_min_temperature are 15deg lower as the printing temperature. Except for TPU and PP.
PP-71
2023-01-24 11:31:39 +01:00
Rijk van Manen
7187550a46 follow the default settings
PP-71
2023-01-24 11:17:52 +01:00
Rijk van Manen
9171aa9168 follow the default settings
PP-71
2023-01-24 11:08:16 +01:00
jspijker
53d8e0c730 Applied printer-linter format
To make sure we have uniform diffs with our PR's
2022-12-30 22:05:41 +01:00
Rijk van Manen
fff03deefa default max comb distance = 15mm
All ultimaker profiles get a default max combing distance of 15mm to avoid oozing in the infill. Profile/material specific settings are removed. PP-69
2022-11-14 13:20:29 +01:00
Rijk van Manen
c47243cdde remove specific initial layer bed temperature
Forgot to remove an initial layer setting. PP-42
2022-10-17 14:52:10 +02:00
Rijk van Manen
27d56d378e improve initial layer settings
ultimaker.def.json is also cleaned and put in alphabetic order.
Ultimaker 2 and original are kept mostly as they were, since they are not tested. PP-42
2022-10-06 16:11:04 +02:00
Rijk van Manen
4712c6abc3 restructure raft airgap
No values are changed, but the settings are restructured. The PVA airgap is moved to fdm_materials. Inconsistent use of equations is also resolved. PP-243
2022-09-13 11:59:34 +02:00
Rijk van Manen
410efc1588 set raft acceleration to default
Rafts have only straight lines, no need for modified acceleration. PP-243
2022-09-13 11:20:53 +02:00
Rijk van Manen
257d37eb73 raft middle layer thickness has new default
The raft middle layer thickness is the average between the top and the base of the raft. This reduces flow jumps significantly. PP-243
2022-09-13 10:20:40 +02:00
Rijk van Manen
071bf77ac9 raft surface thickness = layer height
To avoid flow jumps set raft surface thickness equal to the layer height. In the future we will set initial layer height to layer height as well, so no need to set this to initial layer height now. PP-243
2022-09-13 09:58:17 +02:00
Rijk van Manen
e742a6afa8 set raft margin to default of 15mm
The raft margin is not a critical setting and for most profiles it resolves to 15mm currently, which is the default in fdmprinter. PP-243
2022-09-13 09:33:39 +02:00
Rijk van Manen
e64a48bc86 cleanup jerk settings
Variants: jerk_print = 25 for 0.8 cores
Intent: jerk_print = 30 for Draft/Engineering
PP-239
2022-09-08 16:28:36 +02:00
Rijk van Manen
25ef399595 these settings are already default
PP-242
2022-09-07 16:55:18 +02:00
Rijk van Manen
6d489659f2 Clean up of standby temperatures
Clean up of standby temperatures to printing temperature -100deg. This is a safe default. PP-192
2022-08-29 14:52:02 +02:00
p.kuiper
32eefbb404 Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
This prevents infill layer skipping during self support.

Relates to PP-193
2022-07-13 16:29:18 +02:00
Rijk van Manen
55375a22d4 increase printing temperature BAM 0.1 layerheight
reduced printing temperature for BAM 0.1mm layer height profile causes extrusion issues. No drawback for increasing to the default printing temperature are found. PP-190
2022-07-07 15:35:54 +02:00
p.kuiper
808bb9b5fb Merge remote-tracking branch 'origin/PP-108_Improved_support_settings' into PP-108_Improved_support_settings
# Conflicts:
#	resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
#	resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
#	resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
#	resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
#	resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
#	resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
2022-06-13 21:55:25 +02:00
p.kuiper
bfc25b8350 Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
Relates to PP-108
2022-06-13 21:41:46 +02:00
Rijk van Manen
82569c14ac these profiles can simply follow the default values
Looks like these removals have been overlooked. PP-108
2022-06-13 14:11:28 +02:00
p.kuiper
ba275c546e Renoved settings that already have a good default value in fdmprinter.def.json. Added support_use_towers to the PVA quality files.
Removed support_use_towers for AA and CC cores, they do not add anything to self support structures.

Relates to PP-108
2022-06-08 21:33:14 +02:00
p.kuiper
8e3ec5655a Added PVA robustness improvements. Turn of fan when used as support material, will improve strength. Dump extra material in the skirt to purge the hotend with fresh PVA.
Relates to PP-108
2022-06-08 15:10:41 +02:00
p.kuiper
8ef3444b4a Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant).
Relates to PP-108
2022-06-08 12:40:28 +02:00
p.kuiper
d293a7ae29 Moved support infill thickness to the global quality classes of the dual extrusion machines.
Relates to PP-108
2022-06-07 17:09:35 +02:00
p.kuiper
ca689967fa Cleaned up of the support settings for the UM3 quality modes.
Relates to PP-108
2022-06-03 10:16:28 +02:00
Jaime van Kessel
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
Pp 170 clean up retraction limits
2022-06-02 17:05:57 +02:00
p.kuiper
a103d377f7 Further cleanup of the jerk settings. UM2 based machine have no jerk settings, removed them. Set first layer jerk equal to print jerk and removed all jerk settings (except for jerk_print) in the quality and variant files.
Relates to PP-19
2022-06-02 11:33:22 +02:00
Rijk van Manen
0779cbbbdd set material specific settings
TPU, PP and PVA have a lower retraction count then default. PP-170
2022-06-01 15:18:25 +02:00
Rijk van Manen
3a2a58f546 remove setting, follow the default
PP-170
2022-06-01 15:16:23 +02:00
Ghostkeeper
af454600a2
Merge branch 'PP-104_respect-maximum-flow-AA08' 2022-03-30 13:44:45 +02:00
Rijk van Manen
7452f8703c reduce speed to match maximum flow in CURA413
With the increase in linewidth to the nozzle size, the material flow for especially the infill (but also inner walls) is increased. The speeds are reduced for the superdraft profiles to match the maximum material flow in CURA413. In the future we want to clean this up in a nice way, but for now this at least fixes some serious extrusion problems. PP-104
2022-03-30 09:15:42 +02:00
Rijk van Manen
80d87cb57e increase infill density for good top layer quality
With increasing the infill linewidth, the infill line distance is increased as well. The infill density of the AA0.8 profiles is increased by 5% to the default of 20%. PP-104
2022-03-29 15:28:34 +02:00
Ghostkeeper
d9d90ab4b6
Increment setting_version to 20
We've removed a bunch of settings and transformed others. To allow profiles to be checked for these and edited if necessary, we now need to increment this version number.

Contributes to issue CURA-8466.
2022-03-29 15:03:48 +02:00
Rijk van Manen
bf131f539e remove all wall_thickness statements
All print profiles are following the global rules, no print profile specific exceptions. PP-115
2022-03-15 13:48:41 +01:00