Lukas Matena
1109ad8ee3
Some more CMake polishing
2025-02-17 11:03:13 +01:00
Lukas Matena
15823c3776
Fixed conflicts, fixed compilation of tests
2025-02-17 11:03:13 +01:00
Lukas Matena
f03ee0a1b0
Updated to 193 - no conflicts fixed
2025-02-17 11:03:13 +01:00
Lukas Matena
a52a4bcbb2
Start using the new interface
2025-02-17 11:03:13 +01:00
Lukas Matena
614ab6bdb9
Added z3 dep and libseqarrange dir
2025-02-17 11:03:13 +01:00
Lukas Matena
3e5c9ab40f
Use external seq arrange binary (for prototyping only)
2025-02-17 11:03:13 +01:00
Roman Tyr
9dc3679286
updated Hornet thumbnail
2025-02-14 14:59:30 +01:00
David Kocik
3c377a435e
SPE-2567: Deleting cookies with counter
...
Timer to prevent fail in asynchronous deletion
2025-02-14 12:04:45 +01:00
Lukas Matena
bd19f11919
Merge branch 'ms_seam_stop_overhangs'
2025-02-14 12:02:47 +01:00
Martin Šach
61291d9219
SPE-2495: Do not put scarft seam start on overhangs and blockers
...
Update the function offset_along_lines to offset along
perimeters and add a stop condition.
2025-02-14 12:02:29 +01:00
Martin Šach
b037828aef
SPE 2549: Use 'bridge' annotation in seam placement
...
Add 'bridge' annotated points to the perimeter used for
seam placement.
2025-02-14 12:02:29 +01:00
Lukas Matena
3e67d94803
Make wipe tower position and rotation accessible in placeholder parser again
2025-02-14 12:01:06 +01:00
Martin Šach
eb31b815b1
Fix SPE-2640: Fix overriden extrusions crash
...
Overriden extrusions must be inserted even if they are empty
because the resulting vector must be the same length as
instances_to_print
2025-02-14 11:59:29 +01:00
Lukas Matena
147121ca6a
Merge branch 'lh_mm_segmentation_inconsistency'
2025-02-14 11:57:21 +01:00
Lukáš Hejl
7ff23a5844
SPE-2669: Fix multi-material segmentation artifacts by applying multi-material segmentation to ExPolygon instead of the whole layer.
...
Those artifacts were caused by issues in the Boost Voronoi diagram generator. Processing ExPolygon by ExPolygon significantly reduces the probability that those issues show.
2025-02-14 11:57:05 +01:00
Lukáš Hejl
86fadfc08e
SPE-2194: Split Voronoi cells generated by vertexes into two polygons of equal area instead of selecting just one of the edges based on heuristics.
2025-02-14 11:57:04 +01:00
Lukáš Hejl
36f64d9dd7
SPE-2194: Improve filtering of projected colors in multi-material segmentation.
2025-02-14 11:57:04 +01:00
Lukáš Hejl
c044b310ee
SPE-2194: Snap places where there is a change in projected colors to the nearest sharp angles in multi-material segmentation.
2025-02-14 11:57:04 +01:00
David Kocik
79afab4467
SPE-2681: Safely close app in webview callback.
...
+ handle unused event from Printables.
2025-02-14 11:55:25 +01:00
rtyr
fe108a4d68
Sync with settings-prusa-fff
2025-02-13 15:05:15 +01:00
Lukáš Hejl
ba4116577c
Fix building of tests in RelWithDebInfo mode on Windows.
2025-02-13 14:11:45 +01:00
Lukáš Hejl
082003274b
SPE-2654: Revert "SPE-2615: Fix missing layers and printing in the air on tiny parts with Arachne."
...
This reverts commit 671d0c9b3de44d8444a621f9fbc5792cd1a93927.
2025-02-13 10:45:47 +01:00
Lukáš Hejl
53199bccf7
Fix compilation of test_gcodewriter.cpp.
2025-02-13 10:31:39 +01:00
Martin Šach
9c9e578c76
Build arrange also for CLI
2025-02-12 19:19:06 +01:00
Martin Šach
2f863d52de
Rename the no gui build job
2025-02-12 19:06:07 +01:00
Martin Šach
07b67142c3
Add workflow to enable building without GUI
2025-02-12 18:31:07 +01:00
Lukas Matena
98bb570090
Merge branch 'ys_tilt_next'
2025-02-12 17:13:37 +01:00
Lukas Matena
6e650bb682
Fixed tilt_down_delay legacy value
2025-02-12 17:13:25 +01:00
Lukas Matena
ba00b27dcd
Revert "handle_legacy_sla() is moved into handle_legacy_composite()"
...
This reverts commit 1bc395cac25aa61b2ba6492fb3114675d57cc6e3.
2025-02-12 17:13:25 +01:00
Lukas Matena
0968ffee65
Parameter tower_hop_height type changed from int to float
2025-02-12 17:13:25 +01:00
YuSanka
9896788693
Added buttons for set default tilt values
...
SPE-2666
2025-02-12 17:13:25 +01:00
Lukas Matena
7e4ac102f4
Follow-up to 963f96b - fixed crash when one of the partial meshes was degenerate (SPE-2661)
2025-02-12 17:12:32 +01:00
Lukas Matena
9b8790e4d8
Merge branch 'jalapeno_z_skip' (PR #14060 by @jalapenopuzzle, also related to SPE-2675)
2025-02-12 17:11:13 +01:00
Martin Šach
57e984b083
SPE-2636 Enforce z generation after layer change
...
There can be custom gcode that modifies the print head position.
2025-02-12 17:05:19 +01:00
jalapenopuzzle
419d857a4b
#13420 GCodeWriter Correct Z speed too high and add unit tests
...
#13402 test_gcodewriter.cpp add travel_speed_z tests
These tests fail with the legacy implementation of GCodeWriter::travel_to_xyz_force() because it does not decompose the speed into it's components according to the movement unit vector.
#13420 Correct Z speed too high
2025-02-12 17:05:19 +01:00
jalapnopuzzle
462758153b
const prevents calling GCodeGenerator::travel_to functions which change the m_pos internal state.
...
These methods allow travel moves to be made without checking the distance against XYZ_EPSILON, which may prevent the move from being emitted. This is useful when we want an important comment to be emitted, like a layer change.
get_travel_to_gcode() functions don't maintain m_pos, which later causes incorrect speed calculations as the movement vector is measured incorrectly.
Ensure that client code can't make moves without maintaining m_pos.
2025-02-12 17:05:19 +01:00
jalapnopuzzle
c83f164ed5
#13420 GCodeWriter separate XYZ_EPSILON consistent with XYZF_EXPORT_DIGITS and add unit tests
...
#13420 test_gcodewriter.cpp add tests for XYZF_EXPORT_DIGITS
Check that movement GCodes are emitted / not emitted according to XYZF_EXPORT_DIGITS.
The new tests demonstrate that XYZF_EXPORT_DIGITS is NOT respected.
#13420 GCodeWriter separate XYZ_EPSILON consistent with XYZF_EXPORT_DIGITS
The value of EPSILON=1e-4 (0.0001) in libslicer3r.h is inconsistent with XYZF_EXPORT_DIGITS=3 (0.001).
This change addresses the inconsistency by introducing XYZ_EPSILON which is computed from XYZ_EXPORT_DIGITS, and changing all relevant GCodeWriter functions which used EPSILON to use XYZ_EPSILON instead.
2025-02-12 17:05:19 +01:00
Lukas Matena
5c3c8a6e70
SPE-2539: CLI slicer now only considers instances fully on the first bed
2025-02-12 16:58:34 +01:00
Jan Bařtipán
cbd4dbc58f
Fixed slic3r_jobs_tests.cpp include
2025-02-11 17:22:02 +01:00
Martin Šach
877d7381fc
Add debug symbols to the flatpak asan build
2025-02-11 13:22:14 +01:00
Lukas Matena
ccfcb4bf9d
Improve error message when SLA-slicing a broken mesh (SPE-2680)
2025-02-10 16:06:02 +01:00
Martin Šach
dba7c3baaa
Fix SPE-2464: Always retract before layer change travel
...
If retrac_layer_change is not forced check if the retraction is needed
otherwise always retract
2025-02-07 11:40:55 +01:00
Jan Bařtipán
2aab8f1245
test_infill_above_bridges: migrated to newer catch2
2025-02-07 10:29:49 +01:00
Jan Bařtipán
b72d9a4c58
Merge branch 'jb_catch2_update_to_v3.8'
2025-02-07 10:25:04 +01:00
YuSanka
4cfd8e896b
Follow-up 4be7eeabb4: Fixed a typo caused disable to start GcodeViewer as a separate application
...
SPE-2670
2025-02-06 23:21:31 +01:00
Lukas Matena
120f33e6f9
Merge branch 'spe2632'
2025-02-06 23:19:59 +01:00
Enrico Turri
32b5cfb1f5
Show bed numbers when the camera is below the bed
2025-02-06 23:19:41 +01:00
Enrico Turri
f8dc44d12c
SPE-2632 - Fixed rendering of bed numbers ( #13814 )
2025-02-06 23:19:40 +01:00
Martin Šach
9490ae242f
SPE-2542: Add first_layer_infill_speed
2025-02-06 23:18:05 +01:00
Lukas Matena
5430596a7e
Merge branch 'ms_infill_above_bridges'
2025-02-06 23:14:16 +01:00
