PavelMikus
96b5c92ae9
revert Nearest seam logic to original
2022-08-24 12:40:24 +02:00
PavelMikus
af7ebbfab6
make sure inner loop has length > 0 during shifting
2022-08-24 12:38:04 +02:00
PavelMikus
3db64a7ad3
refactor while cycle to for
2022-08-24 12:14:38 +02:00
PavelMikus
77e37e9879
unifiy usage of the next loop point iterator
2022-08-24 12:14:38 +02:00
PavelMikus
70555b85d6
improved inner seam shifting to follow the loop correctly
2022-08-24 12:14:38 +02:00
Pavel Mikus
c3e0ff6eda
fix issue in seam placer with arachne perimeter lines - the lines overlap
...
with perimeter loops and the line was sometimes mistakenly chosen instead of
the loop and its aligned seam during seam placing
2022-08-24 12:14:38 +02:00
PavelMikus
6848ed29f1
truncation warning fix
2022-08-24 12:14:38 +02:00
PavelMikus
81f07c69e5
fixed offset distance of shifted inner seams, improved nearest to be actually nearest
2022-08-24 12:14:38 +02:00
PavelMikus
1c2c9fd5d9
add new option for shifted inner seams
2022-08-24 12:14:38 +02:00
PavelMikus
3a132c0cb8
fix overhang estimation, use flow width for angle arm length
2022-08-24 12:14:38 +02:00
PavelMikus
8126879e6a
remove expensive merged layer computation, fix overhang computation, smoothen seams
2022-08-24 12:14:37 +02:00
PavelMikus
9a3364d695
staggered seams implementation
2022-08-24 12:14:11 +02:00
PavelMikus
9d2e0160c3
fix patterns in Random seam - replace rand() with pseudorandom generator
2022-08-24 12:14:08 +02:00
PavelMikus
9e88954fbc
Fix of issue 8695 - seam enforced areas were not respected with arachne generator.
...
The real issue was with T-Junctions created by Arachne - seam placer then sometimes
choose the wrong perimeter to split. The fix cases the seam placer to look for two
consecutive points that point to the same perimeter, which enusres that the correct
loop is split
2022-08-24 11:36:41 +02:00
rtyr
106bf141af
Bumped up bundle version
2022-08-24 09:26:12 +02:00
rtyr
de3720c7b1
Added Ender 3 Neo and Ender 3 S1 Plus thumbnails
...
https://github.com/prusa3d/PrusaSlicer/pull/8746
2022-08-24 09:25:11 +02:00
rtyr
d4c69c22f7
Merge pull request #8746 from pmjdebruijn/creality_250
...
Creality.ini: various updates
2022-08-24 09:23:26 +02:00
Pascal de Bruijn
5d724b3849
Creality.ini: add Ender-3 Neo
2022-08-23 18:23:58 +02:00
Pascal de Bruijn
b7315aa9f4
Creality.ini: restore first_layer/top_infill_extrusion_widths
2022-08-23 17:43:41 +02:00
Pascal de Bruijn
201a359bea
Creality.ini: remove bowden inherit from direct drive printers
2022-08-23 17:19:21 +02:00
Pascal de Bruijn
57945708d9
Creality.ini: add Ender-3 S1 Plus
2022-08-23 17:17:35 +02:00
Pascal de Bruijn
4579f12613
Creality.ini: Ender-3 S1 (Pro) CR Touch support ( #8743 )
2022-08-23 17:17:15 +02:00
YuSanka
025b249b85
Localization: Update for zh_CN dictionary (manual merge for PR #8737 - Update translation for 2.5.0-rc1)
...
+ Fixed 1 line for JA dictionary
2022-08-22 12:40:50 +02:00
Lukas Matena
6690d49bea
Bumped up version to 2.5.0-rc1
2022-08-19 16:41:23 +02:00
Lukáš Hejl
9430387354
Windows specific: Use mipmaps generated through OpenGL for AMD graphics cards with drivers newer than 22.6.1.
...
Since AMD driver version 22.7.1, there is probably some bug in the driver that causes the issue with the missing texture of the bed. It seems that this issue only triggers when mipmaps are generated manually (combined with a texture compression) and when mipmaps are generated through OpenGL glGenerateMipmap is working.
This workaround detects the AMD driver version and generates mipmaps through OpenGL for driver versions newer than 22.6.1.
2022-08-19 15:18:33 +02:00
Lukáš Hejl
8c0db761c1
Fix #8716 , #8717 , and #8718 : The pressure equalizer was producing a malformed GCode that caused underextrusion.
2022-08-19 15:07:11 +02:00
Lukáš Hejl
f95a6e3d33
Follow-up to 263b23fb468a4d0981de8ecf590cfd5f6d4edbb6: Fixed an assert.
2022-08-19 09:09:59 +02:00
Lukáš Hejl
263b23fb46
Follow-up to 6f5813a849e40b1bcae97270a317222dff92f5ec: Recalculate infill surfaces when infill_only_where_needed is enabled while switching from the Lightning infill to another infill or vice versa.
2022-08-18 21:17:39 +02:00
PavelMikus
be9cae74a0
Random seam fix - pseudorandom generator instead of rand()
2022-08-18 17:19:58 +02:00
PavelMikus
d746ece41a
fix performance problem in seam placer - do not generate merged islands for each layer; use lslices insted
...
affects also overhang estiamtion and thus other params
2022-08-18 17:19:58 +02:00
Lukáš Hejl
952a6c882c
Fixed an issue that the wipe was shorter when it was located where extrusion width was changing.
2022-08-18 17:00:28 +02:00
rtyr
0c22ca3ece
Sync with PrusaSlicer-settings
2022-08-18 15:48:10 +02:00
YuSanka
dcdbc6bff1
Localization: Updated dictionary for JA
2022-08-18 13:43:47 +02:00
Lukáš Hejl
499c2253bb
Fix of #8704 - Travels in spiral vase mode when Arachne is used.
...
Now Arachne is used just for bottom layers, and for spiralizer layers is used Classic perimeter generator.
2022-08-18 11:22:47 +02:00
Lukáš Hejl
6f5813a849
Fix of #8648 - Lightning infill wasn't connected to perimeters when it was combined with the option "Only infill where needed".
...
Now Lightning infill will ignore this setting and treat it as off. Because Lightning infill and "Only infill where needed" do a similar thing, and their combination doesn't make much sense.
2022-08-18 11:22:45 +02:00
Lukáš Hejl
2115b40728
Fixed incorrectly computed starting position in Concentric infill when Arachne is used.
2022-08-18 11:22:39 +02:00
Lukas Matena
e9f0f4bd0d
Fix error message (related to #8703 )
2022-08-17 22:21:09 +02:00
YuSanka
43a7398c88
ShapesGallery: Fixed save of the thumbnails for custom shapes, when name contains diacritics
2022-08-17 17:40:06 +02:00
Lukas Matena
e8528c415a
Bumped up version to 2.5.0-beta1
2022-08-15 12:35:53 +02:00
YuSanka
60ad5d38c0
Localization: Some phrases are applied. Updated dictionaries for CS, DE, ES, FR, IT and PL
2022-08-15 12:30:57 +02:00
Valter F.C
db7946dbb6
pt_BR translation improvements
2022-08-12 10:02:58 -03:00
YuSanka
522b3f6d98
Follow-up 370e8bd752e3f7c97b9804a56dc417dfb362cce8 - Update 3D-scene after splitting of the unprintable object
2022-08-12 11:09:30 +02:00
YuSanka
7ebd0bbb3b
Fix for #8668 - Don't set printable state on merge if all parts are unprintable
2022-08-12 11:08:04 +02:00
Lukáš Hejl
17e7b182ee
Follow-up to 0161a59a93e326d5e573cffe61b9549a4d925189: Too big epsilon created tiny unconnected extrusions, so epsilon was changed to the smallest value that allows resolving rounding issues after division by two.
2022-08-12 09:48:34 +02:00
Lukáš Hejl
4fa76b2d8b
Reconnected endpoints of closed polyline when PolylineStitcher produced an open polyline mark as closed.
2022-08-12 09:48:34 +02:00
Lukáš Hejl
f60b88ba3e
Fix of #8597 - Assert on Windows about decrementing of std::vector::begin() in a specific case.
2022-08-12 09:48:34 +02:00
Lukáš Hejl
e838acdcd1
Added a lot of debugging outputs (SVG) into SkeletalTrapezoidation.
2022-08-12 09:48:34 +02:00
Lukáš Hejl
4d19eb9ace
Added several test cases distilled from reported issues.
2022-08-12 09:48:33 +02:00
Lukas Matena
661bb522cf
Fixed compiler warnings
2022-08-12 09:40:19 +02:00
Lukas Matena
0df757895e
An attempt to fix issues with wxProgressDialog
2022-08-11 16:51:56 +02:00
